Towards Controlling the Local Bone Tissue Remodeling-Multifunctional Injectable Composites for Osteoporosis Treatment.

Alendronate (ALN) is the most commonly prescribed oral nitrogen-containing bisphosphonate for osteoporosis therapy. However, its administration is associated with serious side effects. Therefore, the drug delivery systems (DDS) enabling local administration and localized action of that drug are still of great importance. Herein, a novel multifunctional DDS system based on the hydroxyapatite-decorated mesoporous silica particles (MSP-NH2-HAp-ALN) embedded into collagen/chitosan/chondroitin sulfate hydrogel for simultaneous osteoporosis treatment and bone regeneration is proposed. In such a system, the hydrogel serves as a carrier for the controlled delivery of ALN at the site of implantation, thus limiting potential adverse effects. The involvement of MSP-NH2-HAp-ALN in the crosslinking process was established, as well as the ability of hybrids to be used as injectable systems. We have shown that the attachment of MSP-NH2-HAp-ALN to the polymeric matrix provides a prolonged ALN release (up to 20 days) and minimizes the initial burst effect. It was revealed that obtained composites are effective osteoconductive materials capable of supporting the osteoblast-like cell (MG-63) functions and inhibiting osteoclast-like cell (J7741.A) proliferation in vitro. The purposely selected biomimetic composition of these materials (biopolymer hydrogel enriched with the mineral phase) allows their biointegration (in vitro study in the simulated body fluid) and delivers the desired physicochemical features (mechanical, wettability, swellability). Furthermore, the antibacterial activity of the composites in in vitro experiments was also demonstrated.

Exfoliated Ferrierite-Related Unilamellar Nanosheets in Solution and Their Use for Preparation of Mixed Zeolite Hierarchical Structures.

Direct exfoliation of layered zeolites into solutions of monolayers has remained unresolved since the 1990s. Recently, zeolite MCM-56 with the MWW topology (layers denoted mww) has been exfoliated directly in high yield by soft-chemical treatment with tetrabutylammonium hydroxide (TBAOH). This has enabled preparation of zeolite-based hierarchical materials and intimate composites with other active species that are unimaginable via the conventional solid-state routes. The extension to other frameworks, which provides broader benefits, diversified activity, and functionality, is not routine and requires finding suitable synthesis formulations, viz. compositions and conditions, of the layered zeolites themselves. This article reports exfoliation and characterization of layers with ferrierite-related structure, denoted bifer, having rectangular lattice constants like those of the FER and CDO zeolites, and thickness of approximately 2 nm, which is twice that of the so-called fer layer. Several techniques were combined to prove the exfoliation, supported by simulations: AFM; in-plane, in situ, and powder X-ray diffraction; TEM; and SAED. The results confirmed (i) the structure and crystallinity of the layers without unequivocal differentiation between the FER and CDO topologies and (ii) uniform thickness in solution (monodispersity), ruling out significant multilayered particles and other impurities. The bifer layers are zeolitic with Brønsted acid sites, demonstrated catalytic activity in the alkylation of mesitylene with benzyl alcohol, and intralayer pores visible in TEM. The practical benefits are demonstrated by the preparation of unprecedented intimately mixed zeolite composites with the mww, with activity greater than the sum of the components despite high content of inert silica as pillars.

Spherical Al-MCM-41 Doped with Copper by Modified TIE Method as Effective Catalyst for Low-Temperature NH3-SCR.

Aluminum containing silica spherical MCM-41 was synthesized and modified with copper by the template ion-exchange method (TIE) and its modified version, including treatment of the samples with ammonia solution directly after template ion-exchange (TIE-NH3). The obtained samples were characterized with respect to their chemical composition (ICP-OES), structure (XRD), texture (low temperature N2 sorption), morphology (SEM-EDS), form and aggregation of deposited copper species (UV-vis DRS), reducibility of copper species (H2-TPR), and surface acidity (NH3-TPD). The deposition of copper by the TIE-NH3 method resulted in much better dispersion of this metal on the MCM-41 surface comparing to copper introduced by TIE method. It was shown that such highly dispersed copper species, mainly monomeric Cu2+ cations, deposited on aluminum containing silica spheres of MCM-41, are significantly more catalytically effective in the NH3-SCR process than analogous catalysts containing aggregated copper oxide species. The catalysts obtained by the TIE-NH3 method effectively operated in much broader temperature and were less active in the side process of direct ammonia oxidation by oxygen.

Detemplated and Pillared 2-Dimensional Zeolite ZSM-55 with Ferrierite Layer Topology as a Carrier for Drugs.

The present studies were conducted to show the potential of 2D zeolites as effective and non-toxic carriers of drugs. Layered zeolites exhibit adjustable interlayer porosity which can be exploited for controlled drug delivery allowing detailed investigation of the drug release because the structure of the carrier is known exactly. This study was conducted with model drugs ciprofloxacin and piracetam, and ZSM-55 with ca 1 nm thick layers, in detemplated and pillared forms. The release profiles differed from the commercial, crystalline forms of drugs-the release rate increased for ciprofloxacin and decreased for piracetam. To understand the dissolution mechanisms the release data were fitted to Korsmeyer-Peppas equation, showing Fickian (for pillared) and anomalous (for detemplated sample) transport. FT-IR studies showed that strong interaction carrier-drug may be responsible for the modified, slowed down release of piracetam while better solubility and faster release of ciprofloxacin was attributed to formation of the protonated form resulting in weaker interaction with the zeolite than in the pure crystalline form. Two independent tests on L929 mice fibroblasts (ToxiLight and PrestoBlue) showed that ZSM-55, in moderate concentrations may be safely used as a carrier of drug molecules, not having negative effect on the cells viability or proliferation rate.

Catalytic Performance of Spherical MCM-41 Modified with Copper and Iron as Catalysts of NH3-SCR Process.

Spherical MCM-41 with various copper and iron loadings was prepared by surfactant directed co-condensation method. The obtained samples were characterized with respect to their structure (X-ray diffraction, XRD), texture (N2 sorption), morphology (scanning electron microscopy, SEM), chemical composition (inductively coupled plasma optical emission spectrometry, ICP-OES), surface acidity (temperature programmed desorption of ammonia, NH3-TPD), form, and aggregation of iron and copper species (diffuse reflectance UV-Vis spectroscopy, UV-Vis DRS) as well as their reducibility (temperature programmed reduction with hydrogen, H2-TPR). The spherical MCM-41 samples modified with transition metals were tested as catalysts of selective catalytic reduction of NO with ammonia (NH3-SCR). Copper containing catalysts presented high catalytic activity at low-temperature NH3-SCR with a very high selectivity to nitrogen, which is desired reaction products. Similar results were obtained for iron containing catalysts, however in this case the loadings and forms of iron incorporated into silica samples very strongly influenced catalytic performance of the studied samples. The efficiency of the NH3-SCR process at higher temperatures was significantly limited by the side reaction of direct ammonia oxidation. The reactivity of ammonia molecules chemisorbed on the catalysts surface in NO reduction (NH3-SCR) and their selective oxidation (NH3-SCO) was verified by temperature-programmed surface reactions.

Reassortment process after co-infection of pigs with avian H1N1 and swine H3N2 influenza viruses.

BACKGROUND: The influenza A virus is highly variable, which, to some degree, is caused by the reassortment of viral genetic material. This process plays a major role in the generation of novel influenza virus strains that can emerge in a new host population. Due to the susceptibility of pigs to infections with avian, swine and human influenza viruses, they are considered intermediate hosts for the adaptation of the avian influenza virus to humans. In order to test the reassortment process in pigs, they were co-infected with H3N2 A/swine/Gent/172/2008 (Gent/08) and H1N1 A/duck/Italy/1447/2005 (Italy/05) and co-housed with a group of naïve piglets. RESULTS: The Gent/08 strains dominated over Italy/05, but reassortment occurred. The reassortant strains of the H1N1 subtype (12.5%) with one gene (NP or M) of swine-origin were identified in the nasal discharge of the contact-exposed piglets. CONCLUSIONS: These results demonstrate that despite their low efficiency, genotypically and phenotypically different influenza A viruses can undergo genetic exchange during co-infection of pigs.

African Swine Fever Epidemic, Poland, 2014-2015.

In Poland, African swine fever (ASF) emerged in February 2014; by August 2015, the virus had been detected in >130 wild boar and in pigs in 3 backyard holdings. We evaluated ASF spread in Poland during these 18 months. Phylogenetic analysis indicated repeated incursions of genetically distinct ASF viruses of genotype II; the number of cases positively correlated wild boar density; and disease spread was very slow. More cases were reported during summer than autumn. The 18-month prevalence of ASF in areas under various animal movement restrictions was 18.6% among wild boar found dead or killed by vehicles and only 0.2% in hunted wild boar. Repeated introductions of the virus into the country, the primary role of wild boar in virus maintenance, and the slow spread of the disease indicate a need for enhanced biosecurity at pig holdings and continuous and intensive surveillance for fast detection of ASF.

Current status of African swine fever virus in a population of wild boar in eastern Poland (2014-2015).

African swine fever virus (ASFV) was detected in wild boar in eastern Poland in early 2014. So far, 65 cases of ASFV infection in wild boar have been recognised. The methods used for ASFV detection included highly specific real-time PCR with a universal probe library (UPL), enzyme-linked immunosorbent assay (ELISA), and an immunoperoxidase test (IPT) for identification of anti-ASFV antibodies. The positive ASF cases were located near the border with Belarus in Sokólka and Bialystok counties. Some of the countermeasures for disease prevention include early ASF diagnosis by ASFV DNA identification as well as detection of specific antibodies by systematic screening. The aim of this study was to assess the current ASF status in a Polish population of wild boar during the last two years (2014-2015).

Photocrosslinked gelatin/chondroitin sulfate/chitosan-based composites with tunable multifunctionality for bone tissue regeneration.

Novel hydrogel-based multifunctional systems prepared utilizing photocrosslinking and freeze-drying processes (PhotoCross/Freeze-dried) dedicated for bone tissue regeneration are presented. Fabricated materials, composed of methacrylated gelatin, chitosan, and chondroitin sulfate, possess interesting features including bioactivity, biocompatibility, as well as antibacterial activity. Importantly, their degradation and swellability might be easily tuned by playing with the biopolymeric content in the photocrosllinked systems. To broaden the potential application and deliver the therapeutic features, mesoporous silica particles functionalized with methacrylate moieties decorated with hydroxyapatite and loaded with the antiosteoporotic drug, alendronate, (MSP-MA-HAp-ALN) were dispersed within the biopolymeric sol and photocrosslinked. It was demonstrated that the obtained composites are characterized by a significantly extended degradation time, ensuring optimal conditions for balancing hybrids removal with the deposition of fresh bone. We have shown that attachment of MSP-MA-HAp-ALN to the polymeric matrix minimizes the initial burst effect and provides a prolonged release of ALN (up to 22 days). Moreover, the biological evaluation in vitro suggested the capability of the resulted systems to promote bone remodeling. Developed materials might potentially serve as scaffolds that after implantation will fill up bone defects of various origin (osteoporosis, tumour resection, accidents) providing the favourable conditions for bone regeneration and supporting the infections' treatment.

Efficient reduction of speckle noise in Optical Coherence Tomography.

Speckle pattern, which is inherent in coherence imaging, influences significantly axial and transversal resolution of Optical Coherence Tomography (OCT) instruments. The well known speckle removal techniques are either sensitive to sample motion, require sophisticated and expensive sample tracking systems, or involve sophisticated numerical procedures. As a result, their applicability to in vivo real-time imaging is limited. In this work, we propose to average multiple A-scans collected in a fully controlled way to reduce the speckle contrast. This procedure involves non-coherent averaging of OCT A-scans acquired from adjacent locations on the sample. The technique exploits scanning protocol with fast beam deflection in the direction perpendicular to lateral dimension of the cross-sectional image. Such scanning protocol reduces the time interval between A-scans to be averaged to the repetition time of the acquisition system. Consequently, the averaging algorithm is immune to bulk motion of an investigated sample, does not require any sophisticated data processing to align cross-sectional images, and allows for precise control of lateral shift of the scanning beam on the object. The technique is tested with standard Spectral OCT system with an extra resonant scanner used for rapid beam deflection in the lateral direction. Ultrahigh speed CMOS camera serves as a detector and acquires 200,000 spectra per second. A dedicated A-scan generation algorithm allows for real-time display of images with reduced speckle contrast at 6 frames/second. This technique is applied to in vivo imaging of anterior and posterior segments of the human eye and human skin.

Dehydration of methanol and ethanol over ferrierite originated layered zeolites - the role of acidity and porous structure.

Ferrierites and their delaminated (ITQ-6) and silica intercalated (ITQ-36) forms, with the intended molar Si/Al ratios of zeolite layers of 30 and 50, were synthesized and tested as catalysts of methanol to dimethyl ether (DME) as well as ethanol to diethyl ether (DEE) and ethylene dehydration. It was shown that increased content of acid sites, especially of Brønsted type, resulted in more active catalysts of alcohol dehydration. Brønsted acid sites dominate in ferrierites and their delaminated forms (ITQ-6). Contribution of the Lewis type of acid sites increased in silica pillared ferrierites (ITQ-36) possibly by deposition of aluminium species on the surface of amorphous silica. Conversion of methanol to DME was not limited by internal diffusion of reactants in narrow pores of ferrierite. Such limitation was observed for synthesis of larger DEE molecules over ferrierites. The ITQ-6 catalysts with the opened interlayer structure presented better efficiency in ethanol to DEE conversion due to overcoming these diffusional restrictions. Moreover, selectivity to DEE over ITQ-6 was higher than in the presence of three-dimensional ferrierite.

Effect of Serial in Vivo Passages on The Adaptation of H1N1 Avian Influenza Virus To Pigs.

Introduction: The lack of proofreading activity of the viral polymerase and the segmented nature of the influenza A virus (IAV) genome are responsible for the genetic diversity of IAVs and for their ability to adapt to a new host. We tried to adapt avian IAV (avIAV) to the pig by serial passages in vivo and assessed the occurrence of point mutations and their influence on viral fitness in the pig's body. Material and Methods: A total of 25 in vivo avIAV passages of the A/duck/Bavaria/77 strain were performed by inoculation of 50 piglets, and after predetermined numbers of passages 20 uninoculated piglets were exposed to the virus through contact with inoculated animals. Clinical signs of swine influenza were assessed daily. Nasal swabs and lung tissue were used to detect IAV RNA by real-time RT-PCR and isolates from selected passages were sequenced. Results: Apart from a rise in rectal temperature and a sporadic cough, no typical clinical signs were observed in infected pigs. The original strain required 20 passages to improve its replication ability noticeably. A total of 29 amino-acid substitutions were identified. Eighteen of them were detected in the first sequenced isolate, of which 16 were also in all other analysed strains. Additional mutations were detected with more passages. One substitution, threonine (T) 135 to serine (S) in neuraminidase (NA), was only detected in an IAV isolate from a contact-exposed piglet. Conclusion: Passaging 25 times allowed us to obtain a partially swine-adapted IAV. The improvement in isolate replication ability was most likely related to S654 to glycine (G) substitution in the basic protein (PB) 1 as well as to aspartic acid (D) 701 to asparagine (N) and arginine (R) 477 to G in PB2, glutamic acid (E) 204 to D and G239E in haemagglutinin and T135S in NA.

Drusen with accompanying fluid underneath the sensory retina.

PURPOSE: To investigate whether confluent drusen may be accompanied by fluid accumulation underneath the sensory retina and to determine if the detection of subretinal fluid on spectral-domain optical coherence tomography (OCT) in patients with coalescent drusen is indicative of choroidal neovascularization (CNV). DESIGN: Prospective, noncomparative case series. PARTICIPANTS: Seventy-four eyes of 57 patients with large, confluent drusen. METHODS: The retinal structure of patients with coalescent drusen was studied by spectral-domain OCT. Optical coherence tomography reflectivity and outer retina topography maps were created and compared with fluorescein angiography (FA) and indocyanine green angiography (ICGA) images as well as with microperimetry. MAIN OUTCOME MEASURES: Optical coherence tomography-derived retinal morphologic features. RESULTS: What appears to be fluid beneath the sensory retina was found on spectral-domain OCT in 8 eyes of 7 patients. The outer retina topography maps demonstrated that fluid accumulates only in the concavity between clustering soft drusen, not on their outward slopes. The maps also revealed a reduced distance between the retinal pigment epithelium (RPE) and the photoreceptor inner/outer segment (IS/OS) junction over large drusen and tiny elevations of the IS/OS junction around drusen of all sizes. Microperimetry showed decreased retinal light sensitivity at the site of diminished distance between the RPE and the IS/OS junction. Seven eyes of 6 patients who were followed up were found to have no retinal changes other than confluent drusen along with subretinal fluid during the entire observational period (12-27 months). There was no evidence of CNV on FA or ICGA in any of the patients. CONCLUSIONS: Large, confluent drusen may be accompanied by subretinal spaces that appear to be filled with fluid. Specific distribution of the fluid limited to the depression between adjacent drusen may indicate that the cluster of coalescent drusen produces mechanical strain to the outer retinal layers that locally pulls the sensory retina away from its normal position. Consequently, the appearance of fluid within subretinal compartment between coalescent drusen in OCT cross-sectional images may not be a reliable marker for the presence of CNV.

Assessment of corneal dynamics with high-speed swept source optical coherence tomography combined with an air puff system.

We present a novel method and instrument for in vivo imaging and measurement of the human corneal dynamics during an air puff. The instrument is based on high-speed swept source optical coherence tomography (ssOCT) combined with a custom adapted air puff chamber from a non-contact tonometer, which uses an air stream to deform the cornea in a non-invasive manner. During the short period of time that the deformation takes place, the ssOCT acquires multiple A-scans in time (M-scan) at the center of the air puff, allowing observation of the dynamics of the anterior and posterior corneal surfaces as well as the anterior lens surface. The dynamics of the measurement are driven by the biomechanical properties of the human eye as well as its intraocular pressure. Thus, the analysis of the M-scan may provide useful information about the biomechanical behavior of the anterior segment during the applanation caused by the air puff. An initial set of controlled clinical experiments are shown to comprehend the performance of the instrument and its potential applicability to further understand the eye biomechanics and intraocular pressure measurements. Limitations and possibilities of the new apparatus are discussed.

Catalysts Based on Strontium Titanate Doped with Ni/Co/Cu for Dry Reforming of Methane.

Two series of strontium titanates doped with Ni, Co, or Cu with general formula of SrTi1-xMexO3 for Sr-stoichiometric and Sr0.95Ti1-xMexO3 for Sr-non-stoichiometric materials (where Me = Ni, Co or Cu and x were 0.02 and 0.06) were obtained by the wet chemical method. The samples were calcinated at 900, 950, and 1050 °C and characterized in terms of their structural properties (XRD), the possibility of undergoing the reduction and oxidation reactions (TPR/TPOx), and catalytic properties. All obtained materials were multiphase and although the XRD analysis does not confirm the presence of Ni, Co, and Cu oxides (with one exception for Cu-doped sample), the TPR/TPOx profiles show reduction peaks that can be attributed to the reduction of these oxides which may at first appear in an amorphous form. Catalytic tests in dry reforming of methane reaction showed that the highest catalytic activity was achieved for Ni-doped materials (up to 90% of CH4 conversion) while Co and Cu-doped samples showed only a very slight catalytic effect. Additionally, the decrease in methane conversion with an increasing calcination temperature was observed for Ni-doped strontium titanates.

Fas/FasL Contributes to HSV-1 Brain Infection and Neuroinflammation.

The Fas/FasL pathway plays a key role in immune homeostasis and immune surveillance. In the central nervous system (CNS) Fas/FasL is involved in axonal outgrowth and adult neurogenesis. However, little is known about the role of the Fas/FasL pathway in herpes encephalitis. In this study, we used a neuropathogenic clinical strain of herpes simplex virus type 1 (HSV-1) to explore infection-induced inflammation and immune responses in the mouse brain and the role of Fas/FasL in antiviral CNS immunity. HSV-1 CNS infection induced the infiltration of Fas- FasL-bearing monocytes and T cells in the brain and also to an up-regulation of Fas and FasL expression on resident astrocytes and microglia within infected sites. Upon infection, Fas- and FasL-deficient mice (lpr and gld) were partially protected from encephalitis with a decreased morbidity and mortality compared to WT mice. Fas/FasL deficiency promoted cell-mediated immunity within the CNS. Fas receptor stimulation abrogated HSV-1 induced activation and inflammatory reactions in microglia from WT mice, while lack of Fas or FasL led to a more pronounced activation of monocytes and microglia and also to an enhanced differentiation of these cells into a pro-inflammatory M1 phenotype. Furthermore, the specific immune system was more efficient in Fas- and FasL-deficient mice with significantly higher numbers of infiltrating HSV-1-specific cytotoxic T cells in the brain. Our data indicate that the Fas/FasL pathway leads to excessive neuroinflammation during HSV-1 infection, which is associated with a diminished anti-viral response and an excessive neuroinflammation.

Titanium-silicon ferrierites and their delaminated forms modified with copper as effective catalysts for low-temperature NH3-SCR.

Titanium-silicon ferrierites with different Si/Ti ratios and their delaminated forms were modified with copper by ion-exchange. The obtained samples were characterized with respect to their chemical composition (ICP-OES), structure (XRD), texture (N2 sorption), morphology (SEM), form and aggregation of titanium and copper species (UV-vis-DRS), reducibility of deposited copper species (H2-TPR) and surface acidity (NH3-TPD). The porous structure of the zeolitic samples strongly influenced the form and aggregation of deposited copper species. In the case of the three dimensional microporous structure of ferrierites (Ti-FER), copper was deposited mainly in the form of aggregated copper oxide species, in contrast to the open micro- and mesoporous structure of delaminated ferrierites (Ti-ITQ-6), where mainly copper in the form of monomeric cations was identified. It was shown that monomeric copper cations are more catalytically active in NO to NO2 oxidation than aggregated copper oxide species and, therefore, for the low-temperature conversion of nitrogen oxides the fast SCR reaction pathway is more effective for delaminated ferrierites modified with copper (Cu-Ti-ITQ-6) than for microporous three dimensional ferrierite catalysts (Cu-Ti-FER).

Catalytic and photocatalytic oxidation of diphenyl sulphide to diphenyl sulfoxide over titanium dioxide doped with vanadium, zinc, and tin.

Samples of TiO2 (P25) doped with zinc, tin, and vanadium, thermally treated at 550 °C for 6 h, were tested as catalysts and photocatalysts for the oxidation of diphenyl sulphide to diphenyl sulfoxide and sulfone, using hydrogen peroxide as an oxidation agent. Thermal treatment of pure TiO2 and its vanadium-doped forms resulted in a decrease of anatase and an increase of rutile content. The opposite effect was observed for TiO2 doped with zinc or tin, where thermal treatment resulted in the rutile to anatase phase transition. The role of V, Zn, and Sn admixtures as TiO2 phase-composition controllers was postulated. The catalytic and photocatalytic activity was found to be influenced more by the rutile and anatase contents of the samples than the presence of admixtures. The rutile-containing samples, TiO2 and V-TiO2, presented much better activity in the catalytic oxidation of diphenyl sulphide compared with the catalysts that only contained the anatase phase, Sn-TiO2 and Zn-TiO2. The reaction efficiency was significantly improved under UV radiation. In this case, the best photocatalytic activity was found for calcined TiO2, containing both anatase and rutile components. An increase in rutile content, observed in the vanadium-doped TiO2, decreased the efficiency of the photocatalytic diphenyl sulphide oxidation. Thus, the presence of both anatase and rutile phases, with their favourable contributions, typical for P25, is necessary for the effective oxidation of Ph2S to Ph2SO. Moreover, it was shown that for the second oxidation stage, Ph2SO to Ph2SO2, the presence of the rutile phase is very important.

Ferrierite and Its Delaminated Forms Modified with Copper as Effective Catalysts for NH3-SCO Process.

Ferrierites and their delaminated forms (ITQ-6), containing aluminum or titanium in the zeolite framework, were synthetized and modified with copper by an ion-exchange method. The obtained samples were characterized with respect to their chemical composition (ICP-OES), structure (XRD, UV-Vis DRS), textural parameters (N2-sorption), surface acidity (NH3-TPD), form and reducibility of deposited copper species (UV-Vis DRS and H2-TPR). Ferrierites and delaminated ITQ-6 zeolites modified with copper were studied as catalysts for the selective catalytic oxidation of ammonia to dinitrogen (NH3-SCO). It was shown that aggregated copper oxide species, which were preferentially formed on Ti-zeolites, were catalytically active in direct low-temperature ammonia oxidation to NO, while copper introduced into Al-zeolites was present mainly in the form of monomeric copper cations catalytically active in selective reduction of NO by ammonia to dinitrogen. It was postulated that ammonia oxidation in the presence of the studied catalysts proceeds according to the internal-selective catalytic reduction mechanism (i-SCR) and therefore the suitable ratio between aggregated copper oxide species and monomeric copper cations is necessary to obtain active and selective catalysts for the NH3-SCO process. Cu/Al-ITQ-6 presented the best catalytic properties possibly due to the most optimal ratio of these copper species.

MCM-22, MCM-36, and ITQ-2 Zeolites with Different Si/Al Molar Ratios as Effective Catalysts of Methanol and Ethanol Dehydration.

MCM-22, MCM-36, and ITQ-2 zeolites with the intended Si/Al molar ratios of 15, 25, and 50 were synthetized and tested as catalysts for dehydration of methanol to dimethyl ether and dehydration of ethanol to diethyl ether and ethylene. The surface concentration of acid sites was regulated by the synthesis of zeolite precursors with different aluminum content in the zeolite framework, while the influence of porous structure on the overall efficiency of alcohol conversion was analyzed by application of zeolitic materials with different types of porosity-microporous MCM-22 as well as microporous-mesoporous MCM-36 and ITQ-2. The zeolitic samples were characterized with respect to their: chemical composition (ICP-OES), structure (XRD, FT-IR), texture (N2 sorption), and surface acidity (NH3-TPD). Comparison of the catalytic activity of the studied zeolitic catalysts with other reported catalytic systems, including zeolites with the similar Si/Al ratio as well as γ-Al2O3 (one of the commercial catalysts for methanol dehydration), shows a great potential of MCM-22, MCM-36, and ITQ-2 in the reactions of alcohols dehydration.