Unexpected Wear of a Uniquely Designed Moderately Cross-Linked Polyethylene in Total Hip Arthroplasty.

BACKGROUND: A uniquely designed, non-heat-treated moderately cross-linked acetabular polyethylene liner used in total hip arthroplasty (THA) demonstrated excessive wear during routine follow-up, prompting an evaluation of the linear wear rate. METHODS: All THAs were performed by the senior author. The study group included 38 THAs using the uniquely designed polyethylene in question, compared to a control group of 21 THAs using another moderately cross-linked polyethylene with good 10-year outcomes. Two-dimensional linear head penetration wear measurements were obtained using the Martell Hip Analysis Suite, and retrieval analysis was performed on two liners. RESULTS: The study group had a significantly higher average penetration rate of 0.089 mm/y than the control group average rate of 0.047 mm/y (P = .04). Forty-five percent of the study group had a wear rate above the osteolysis threshold (0.1 mm/y), compared to 24% in the control group. Macroscopic analysis of two retrieved liners validated the radiographic findings. CONCLUSION: The data suggest unexpectedly higher wear rates for a moderately cross-linked polyethylene design, with nearly half of the study group at risk for osteolysis. Further registry or database analyses of this particular moderately cross-linked polyethylene are warranted.

Improved Perioperative Care of Elective Joint Replacement Patients: The Impact of an Orthopedic Perioperative Hospitalist.

BACKGROUND: We developed an orthopedic hospitalist fellowship program for our total joint replacement program at a large urban academic medical center. The goal of the program was to improve patient outcomes, quality, and healthcare value through collaborative perioperative care and improved care coordination. This study evaluates the implementation and impact of our modified Hospitalist-Orthopaedic Team Co-management model on quality and performance metrics. METHODS: We reviewed our Quality Institute data using 3 databases for the 16 months before (PreOH) and 18 months after (PostOH) implementation. Procedural volume was identical during period 1 (1100 cases) vs period 2 (1119 cases). Metrics included mean LOS (length of stay), % patients discharged home, mean observed and expected LOS and LOS index, LOS variance, % ICU (intensive care unit) admissions, mean ICU days, % cases with complications, % mortality, 30-day readmission rate, and Hospital Consumer Assessment of Healthcare Providers and Systems scores. Statistical analysis was performed using the software imbedded in the database software. RESULTS: Statistically significant improvements occurred in multiple performance and quality metrics including mean hospital LOS for total knee replacement, percentage of total knee replacement patients discharged home, and percentage of patients discharged home for primary total hip arthroplasty, complication rate, and 30-day readmission rate. Reductions in % ICU admission and ICU LOS were seen but not statistically significant. HCAPHS scores improved in 6 of 8 categories, and was statistically significant in 3 of 8. CONCLUSION: The results of this study demonstrate that the modified Hospitalist-Orthopaedic Team Co-management model described above improves quality, cost effectiveness, and value for elective total joint replacement patients in comparison to the traditional consultation only model.

Are Radiographic and Direct Measures of Acetabular Polyethylene Wear Comparable?

BACKGROUND: All polyethylene acetabular liners wear over time, and numerous methods for calculating linear wear rates exist. The objective of this study was to compare 2-dimensional wear rates between direct, micrometer measurements and the computerized, edge-detection method using Hip Analysis Suite (HAS) 8.0.4.3. METHODS: Two groups of retrieved acetabular liners from Harris-Galante Prosthesis I and Harris-Galante Prosthesis II implants in situ for more than 10 years were evaluated. Group 1 (n = 18) contained liners with both early postoperative (<6 months) and prerevision radiographs taken within 1 month of explantation. Group 2 (n = 55) included liners with only prerevision X-rays (ie, 1 radiograph for wear assessment). Average and maximum direct linear wear was calculated from thicknesses measured at 6 consistent, well-separated locations (3 in the worn and 3 in the unworn regions) using a calibrated, digital micrometer. HAS 8.0.4.3 was used to calculate 2-dimensional wear from anteroposterior pelvic radiographs. RESULTS: Aggregate wear rates calculated by HAS were higher than those calculated by the average of direct measurements for group 1 (P = .020) and group 2 (P < .001). However, comparing the maximum direct micrometer measurements to HAS showed no difference for either group 1 (P = .351) or group 2 (P = .451). Linear regression analysis showed a strong correlation between HAS and both average and maximum direct wear measures for both groups, though the coefficient for the direct maximum measurement comparisons were closer to one, indicating a better one-to-one correspondence between HAS and direct maximum wear. CONCLUSION: To our knowledge, this is the first study to compare and validate 2-dimensional wear rates in polyethylene acetabular liners between direct measurements from retrieved components and a radiographic computer-assisted technique (as opposed to comparison against a phantom component). Wear rates determined by direct measurements from retrievals were consistent with computer-assisted 2-dimensional methods when comparing maximum wear measurements. In addition, a single prerevision radiograph appears to be sufficient to assess 2-dimensional in vivo wear.

Are Readmissions After THA Preventable?

BACKGROUND: Readmissions after total joint arthroplasty have become a key quality measure in elective surgery in the United States. The Affordable Care Act includes the Hospital Readmission Reduction Program, which calls for reduced payments to hospitals with excessive readmissions. This policy uses a method to determine excess readmission ratios and calculate readmission payment adjustments to hospitals, however, it is unclear whether readmission rates are an effective quality metric. The reasons or conditions associated with readmission after elective THA have been well established but the extent to which readmissions can be prevented after THA remains unclear. QUESTIONS/PURPOSES: (1) Are unplanned readmissions after THA associated with orthopaedic or medical causes? (2) Are these readmissions preventable? (3) When during the course of aftercare are orthopaedic versus medical readmissions more likely to occur? METHODS: We retrospectively evaluated all 1096 elective THAs for osteoarthritis performed between January 1, 2011 and June 30, 2014 at a major academic medical center. Of those, 69 patients (6%) who met inclusion criteria were readmitted in our healthcare system within 90 days of discharge after the index procedure during the study period. Fifty patients were readmitted within 30 days of discharge after the index procedure (5%). We defined a readmission as any unplanned inpatient or observation status admission to the hospital spanning at least one midnight. A panel of physicians not involved in the care of these patients used available criteria and existing consensus guidelines to evaluate the medical records, radiographs, and operative reports to identify whether the underlying reason for readmission was orthopaedic versus medical. They subsequently were classified as either nonpreventable or potentially preventable readmissions, based on any care that may have occurred during the index hospitalization. To make such determinations, consensus specialty society guidelines were used whenever possible for each readmission diagnosis. RESULTS: A total of 50 of 1096 patients (5% of those who underwent THA during the period in question) were readmitted within 30 days and 69 of 1096 (6%) were readmitted within 90 days of their index procedures. Thirty-one patients were readmitted for orthopaedic reasons (31/69; 45%) and 38 of 69 were readmitted for medical reasons (55%). Three readmissions (three of 69; 4%) were identified as potentially preventable. Of these potentially preventable readmissions, one was orthopaedic (hip dislocation) and two were medical. Thirty-day readmissions were more likely to be orthopaedic than 90-day readmissions (odds ratio, 4.06; 95% CI, 1.18-13.96; p = 0.026). CONCLUSIONS: Using a panel of expert reviewers, available existing criteria, and consensus methodology, it appears only a small percentage of readmissions after THA are potentially preventable. Orthopaedic readmissions occur earlier during the postoperative course. Currently, existing policies and readmission penalties may not serve as valuable external quality metrics. The readmission rates in our study may represent the threshold for expected readmission rates after THA. Future studies should enroll larger numbers of patients and have independent review panels in efforts to refine criteria for what constitutes preventable readmissions. LEVEL OF EVIDENCE: Level III, therapeutic study.

Fretting and Corrosion Damage in Taper Adapter Sleeves for Ceramic Heads: A Retrieval Study.

BACKGROUND: During revision surgery with a well-fixed stem, a titanium sleeve can be used in conjunction with a ceramic head to achieve better stress distribution across the taper surface. In vitro testing suggests that corrosion is not a concern in sleeved ceramic heads; however, little is known about the in vivo fretting corrosion of the sleeves. The purpose of this study was to investigate fretting corrosion in sleeved ceramic heads in retrieved total hip arthroplasties. METHODS: Thirty-seven sleeved ceramic heads were collected during revision. The femoral heads and sleeves were implanted 0.0-3.3 years. The implants were revised predominantly for instability, infection, and loosening. Fifty percent of the retrievals were implanted during a primary surgery. Fretting corrosion was assessed using the Goldberg-Higgs semiquantitative scoring system. RESULTS: Mild-to-moderate fretting corrosion scores (score = 2-3) were observed in 92% of internal tapers, 19% of external tapers, and 78% of the stems. Severe fretting corrosion was observed in 1 stem trunnion that was previously retained during revision surgery and none of the retrieved sleeves. There was no difference in corrosion damage of sleeves used in primary or revision surgery. CONCLUSION: The fretting corrosion scores in this study were predominantly mild and lower than reported fretting scores of cobalt-chrome heads in metal-on-polyethylene bearings. Although intended for use in revisions, we found that the short-term in vivo corrosion behavior of the sleeves was similar in both primary and revision surgery applications. From an in vivo corrosion perspective, sleeves are a reasonable solution for restoring the stem taper during revision surgery.

Do Stem Taper Microgrooves Influence Taper Corrosion in Total Hip Arthroplasty? A Matched Cohort Retrieval Study.

BACKGROUND: Previous studies identified imprinting of the stem morphology onto the interior head bore, leading researchers to hypothesize an influence of taper topography on mechanically assisted crevice corrosion. The purpose of this study was to analyze whether microgrooved stem tapers result in greater fretting corrosion damage than smooth stem tapers. METHODS: A matched cohort of 120 retrieved head-stem pairs from metal-on-polyethylene bearings was created controlling for implantation time, flexural rigidity, apparent length of engagement, and head size. There were 2 groups of 60 heads each, mated with either smooth or microgrooved stem tapers. A high-precision roundness machine was used to measure and categorize the surface morphology. Fretting corrosion damage at the head-neck junction was characterized using the Higgs-Goldberg scoring method. Fourteen of the most damaged heads were analyzed for the maximum depth of material loss and focused ion beam cross-sectioned to view oxide and base metal. RESULTS: Fretting corrosion damage was not different between the 2 cohorts at the femoral head (P = .14, Mann-Whitney) or stem tapers (P = .35). There was no difference in the maximum depths of material loss between the cohorts (P = .71). Cross-sectioning revealed contact damage, signs of micro-motion, and chromium-rich oxide layers in both cohorts. Microgroove imprinting did not appear to have a different effect on the fretting corrosion behavior. CONCLUSION: The results of this matched cohort retrieval study do not support the hypothesis that taper surfaces with microgrooved stems exhibit increased in vivo fretting corrosion damage or material release.

Is there material loss at the backside taper in modular CoCr acetabular liners?

BACKGROUND: Metal wear and corrosion products generated by hip replacements have been linked to adverse local tissue reactions. Recent investigations of the stem/head taper junction have identified this modular interface as another possible source of metal debris; however, little is known regarding other modular metallic interfaces, their ability to produce metal debris, and possibly to provide insight in the mechanisms that produce metal debris. QUESTIONS/PURPOSES: We asked three questions: (1) can we develop a reliable method to estimate volumetric material loss from the backside taper of modular metal-on-metal liners, (2) do backside tapers of modular metal-on-metal liners show a quantifiable volumetric material loss, and, if so, (3) how do regions of quantitatively identified material loss correspond to visual and microscopic investigations of surface damage? METHODS: Twenty-one cobalt-chromium (CoCr) liners of one design and manufacturer were collected through an institutional review board-approved retrieval program. All liners were collected during revision surgeries, where the primary revision reason was loosening (n=11). A roundness machine measured 144 axial profiles equally spaced about the circumference of the taper region near the rim to estimate volume and depth of material loss. Sensitivity and repeatability analyses were performed. Additionally, visual and scanning electron microscopy investigations were done for three liners. RESULTS: Our measurement method was found to be reproducible. The sensitivity (how dependent measurement results are on experimental parameters) and repeatability (how consistent results are between measurements) analyses confirmed that component alignment had no apparent effect (weak correlation, R2=0.04) on estimated volumetric material loss calculations. Liners were shown to have a quantifiable material loss (maximum=1.7 mm3). Visual investigations of the liner surface could identify pristine surfaces as as-manufactured regions, but could misidentify discoloration as a possible region of material loss. Scanning electron microscopy more accurately distinguished between as-manufactured and damaged regions of the taper. CONCLUSIONS: The roundness machine has been used to develop a repeatable method for characterizing material loss; future work comparing a gravimetric standard with estimations of material loss determined from the roundness machine may show the accuracy and effectiveness of this method. Liners show rates of material loss that compare with those reported for other taper junctions. Visual inspection alone may misidentify as-manufactured regions as regions of material loss. CLINICAL RELEVANCE: This study identifies the acetabular liner/shell interface in modular metal-on-metal devices as a potential source of metal wear or corrosion products. The relation between metal debris and clinical performance, regardless of the type of bearing couple, is a concern for clinicians. Therefore, it is important to characterize every type of modular junction to understand the quantity, location, and mechanism(s) of material loss.

Predictors of range of motion in patients undergoing manipulation after TKA.

BACKGROUND: Knee stiffness or limited range of motion (ROM) after total knee arthroplasty (TKA) may compromise patient function. Patients with stiffness are usually managed with manipulation under anesthesia (MUA) to improve ROM. However, the final ROM obtained is multifactorial and may depend on factors such as comorbidities, implant type, or the timing of MUA. QUESTIONS/PURPOSES: We asked whether diabetes mellitus, implant type, and the interval between TKA and MUA influenced post-MUA ROM. METHODS: From a group of 2462 patients with 3224 TKAs performed between 1999 and 2007 we retrospectively reviewed 96 patients with 119 TKAs (4.3%) who underwent MUA. We determined the presence of diabetes mellitus, implant type, and the interval between TKA and MUA. RESULTS: The average increase in ROM after MUA was 34°. Patients with diabetes mellitus experienced lower final ROM after MUA (87.5° versus 100.3°) as did patients with cruciate-retaining (CR) prostheses versus posterior-stabilized (92.3° versus 101.6°). The interval between TKA and MUA inversely correlated with final ROM with a decrease after 75 days. CONCLUSIONS: Most patients experience improvements in ROM after MUA. Patients with diabetes mellitus or CR prostheses are at risk for lower final ROM after MUA. Manipulation within 75 days of TKA is associated with better ROM.

Do ceramic femoral heads reduce taper fretting corrosion in hip arthroplasty? A retrieval study.

BACKGROUND: Previous studies regarding modular head-neck taper corrosion were largely based on cobalt chrome (CoCr) alloy femoral heads. Less is known about head-neck taper corrosion with ceramic femoral heads. QUESTIONS/PURPOSES: We asked (1) whether ceramic heads resulted in less taper corrosion than CoCr heads; (2) what device and patient factors influence taper fretting corrosion; and (3) whether the mechanism of taper fretting corrosion in ceramic heads differs from that in CoCr heads. METHODS: One hundred femoral head-stem pairs were analyzed for evidence of fretting and corrosion using a visual scoring technique based on the severity and extent of fretting and corrosion damage observed at the taper. A matched cohort design was used in which 50 ceramic head-stem pairs were matched with 50 CoCr head-stem pairs based on implantation time, lateral offset, stem design, and flexural rigidity. RESULTS: Fretting and corrosion scores were lower for the stems in the ceramic head cohort (p=0.03). Stem alloy (p=0.004) and lower stem flexural rigidity (Spearman's rho=-0.32, p=0.02) predicted stem fretting and corrosion damage in the ceramic head cohort but not in the metal head cohort. The mechanism of mechanically assisted crevice corrosion was similar in both cohorts although in the case of ceramic femoral heads, only one of the two surfaces (the male metal taper) engaged in the oxide abrasion and repassivation process. CONCLUSIONS: The results suggest that by using a ceramic femoral head, CoCr fretting and corrosion from the modular head-neck taper may be mitigated but not eliminated. CLINICAL RELEVANCE: The findings of this study support further study of the role of ceramic heads in potentially reducing femoral taper corrosion.

Dual-Energy X-Ray Absorptiometry (DEXA) Evaluation of the Bone Remodeling Effects of a Low-Modulus Composite Hip Stem After 2 Decades of Follow-Up.

Background: The Epoch FullCoat Hip Stem (Zimmer) was an isoelastic composite femoral stem developed to address stem stiffness concerns. Purpose: We sought to evaluate the long-term bone mineral density (BMD) of a cohort of patients who underwent total hip arthroplasty (THA) using the Epoch isoelastic stem and having more than 2-decade follow-up. Methods: We conducted a retrospective chart review of all patients who were study subjects at our institution in a multicenter prospective trial for the Food and Drug Administration of the Epoch implant in the mid-1990s. Through this, we identified 16 patients who had dual-energy X-ray absorptiometry (DEXA) scans, with which we could determine BMD preoperatively and at 3 points postoperatively. Of these, 5 agreed to participate in the study (the others were deceased, unable or declined to participate, or were lost to follow-up) with mean follow-up of 22 years. These participants underwent clinical and radiographic evaluation consisting of a Harris hip score, anteroposterior (AP) pelvis and AP and lateral hip X-rays, and DEXA evaluation of both hips. BMD in the 7 Gruen zones at last follow-up was compared with immediate postoperative and 2-year follow-up. Results: At last follow-up, all stems were well-fixed with signs of extensive osteointegration. In proximal Gruen zones 1 and 7, patients underwent a decrease in BMD with more modest losses in Gruen zone 1. All patients demonstrated an increase in BMD in zones 2 through 6 at latest follow-up, except for 1 patient in Gruen zone 6. BMD changes were not limited to the first 2 years of follow-up. Conclusion: This small follow-up cohort study found excellent long-term clinical results, no plain radiographic signs of notable stress shielding, and general maintenance of BMD at a follow-up of over 20 years for this isoelastic stem. Long-term bone remodeling after implantation of the isoelastic stem resulted in increased BMD in Gruen zones 2 through 6, suggesting that composite implant designs may still have a role in THA.

Retrieval analysis of Harris-Galante I and II acetabular liners in situ for more than 10 years.

BACKGROUND AND PURPOSE: There have been few reports documenting the wear and oxidation performance of the polyethylene bearing surface of HGPI and HGPII THA devices. We evaluated retrieved HGPI and HGPII acetabular liners that had been in situ for more than 10 years and determined whether there was a relationship between clinical and radiographic factors, surface damage, wear, and oxidation. MATERIALS AND METHODS: 129 HGPI and II acetabular liners with implantation times of > 10 years were retrieved at 4 institutions between 1997 and 2010. The liners were made from a single resin and were gamma radiation-sterilized in air. Surface damage, linear wear, and oxidation index (OI) were assessed. Differences in clinical and radiographic factors, surface damage, linear wear, and OI for the 2 designs were statistically evaluated separately and together. RESULTS: Articular surface damage and backside damage was similar in the 2 designs. The linear penetration rate was 0.14 (SD 0.07) mm/year for the HGPI liners and 0.12 (SD 0.08) mm/year for the HGPII liners. For both cohorts, the rim had a higher OI than the articular surface. 74% of the liners had subsurface cracking and 24% had a complete fracture through the acetabular rim. INTERPRETATION: Despite modification of the HGP locking mechanism in the HGPII design, dissociation of the liner from the acetabular shell can still occur if fracture of the rim of the liner develops due to oxidative degradation.

Incidence of postthrombotic syndrome in patients undergoing primary total hip arthroplasty for osteoarthritis.

BACKGROUND: Postthrombotic syndrome (PTS) is a chronic condition in the lower extremity that develops after deep vein thrombosis (DVT). The incidence of PTS after total hip arthroplasty (THA) is not well established. QUESTIONS/PURPOSES: We (1) determined the incidence of PTS after DVT in patients undergoing primary THA for osteoarthritis; and (2) determined whether the incidence of PTS was greater in patients with DVT than without. METHODS: We retrospectively reviewed records of all 1037 patients who underwent primary THA for osteoarthritis during a 4-year period. All patients underwent postoperative screening ultrasound. We identified 21 (2%) patients with a DVT by ultrasound of whom 14 had a minimum 1-year followup (mean, 3.4 years; range, 1.0-6.0 years). PTS was diagnosed if any two of the six clinical signs were documented. RESULTS: Three of 14 patients with DVT had at least two signs consistent with PTS; two of these had a DVT proximal to the soleal arch. Three of 91 randomly matched patients undergoing THA without DVT had at least two signs of PTS. The incidence of developing PTS after THA appeared higher in patients with DVT than in patients without DVT. CONCLUSIONS: While we observed a difference between the incidence of PTS after THA in patients with and without DVT, that incidence was based on only three of 1037 patients with DVT after THA. PTS does not appear to be a major complication after DVT in patients undergoing THA. LEVEL OF EVIDENCE: Level III, diagnostic study. See Guidelines for Authors for a complete description of levels of evidence.

Crack initiation in retrieved cross-linked highly cross-linked ultrahigh-molecular-weight polyethylene acetabular liners: an investigation of 9 cases.

Nine cross-linked highly cross-linked ultrahigh-molecular weight polyethylene acetabular liners were retrieved at revision surgery. Eight of the liners were fully intact and functional at retrieval. Six cases contained shallow initiated cracks at the root of rim notches; 1 crack had propagated several millimeters. Optical and electron microscopic inspection of the crack surfaces revealed clam shell markings, which are characteristic of fatigue crack initiation. Crack initiation at notches has been identified in reports of catastrophic cross-linked liner failures, with crack initiation sites exhibiting similar morphology and clam shell markings. Thus, we believe that the shallow cracks identified in this case series are precursors to catastrophic rim fracture. The results of this study recommend further investigations to clarify the etiology and prevalence of crack initiation in cross-linked acetabular liners.

In vivo oxidation contributes to delamination but not pitting in polyethylene components for total knee arthroplasty.

The aim of this study was to better understand how in vivo oxidation contributes to fatigue damage in total knee arthroplasty (TKA). A total of 119 tibial inserts were consecutively collected after revision surgery. Of the 119 polyethylene retrievals, 29 were gamma sterilized in air (historical), whereas the remaining 90 were gamma sterilized in nitrogen (conventional). Surface damage assessment and characterization of oxidation were performed on all the retrievals. Delamination was significantly more prevalent and extensive in the longer-term, highly oxidized, historical tibial inserts. Pitting damage, in contrast, seemed to be equally prevalent between both retrieval groups and was not correlated with in vivo oxidation. Our findings support our hypothesis that in vivo oxidation is a contributing factor to delamination, but not pitting, in TKA. Despite the lower oxidation displayed by conventional retrievals, this study provides strong evidence that delamination secondary to in vivo oxidation may occur during the second decade of implantation.

Post damage in contemporary posterior-stabilized tibial inserts: influence of implant design and clinical relevance.

The mechanisms of damage at the polyethylene post in 3 contemporary tibial insert designs were evaluated and compared with a historical standard (Insall-Burstein II; Zimmer, Warsaw, Ind). One hundred five gamma sterilized posterior-stabilized tibial inserts were revised after an average of 4.7 years (0.05-13.6 years). Retrievals were classified according to their designs: Insall-Burstein II (n = 28); PFC (Johnson & Johnson, Raynham, Mass; n = 30); NexGen (Zimmer; n = 32); and Scorpio (Stryker Orthopaedics, Mahwah, NJ; n = 15). Reasons for revision and patient details were available. Surface damage scoring and photogrammetry were performed on all the retrieved tibial inserts. Oxidation analysis was carried out for traceable historical, gamma air-sterilized and conventional, gamma inert-sterilized tibial inserts (n = 61) with the use of infrared spectroscopy. The posts for all 3 contemporary designs exhibited damage similar to the historical controls. Articular, post, and backside damage scores significantly increased with implantation time. Post damage was insensitive to design and patient factors but was exacerbated by oxidation. An association between damage at the post and articular surface was also confirmed. Logistic models suggested an interaction between post damage, backside surface damage, and implant loosening.

Revision total knee arthroplasty for aseptic and septic causes in patients with rheumatoid arthritis.

UNLABELLED: Revision total knee arthroplasty in patients with rheumatoid arthritis can be challenging. We asked whether we could confirm previously reported high failure rates following revision total knee arthroplasty in patients with rheumatoid arthritis. We therefore determined the Knee Society knee score and function scores, radiographic evidence of failure, and overall survival of the revision procedure in these patients. We retrospectively reviewed 39 patients with rheumatoid arthritis who underwent 45 TKA revisions from 1994 to 2006. Twenty-seven of the 45 TKA revisions were for mechanical failure of the prosthetic components and 18 for infection. Five of the 27 knees (19%) revised for mechanical failure subsequently failed a second time. Five of the 18 patients who underwent revision for infection died within 6 months and three of the remaining knees failed secondary to reinfection. Excluding the knees that failed, the average Knee Society knee score and function score improved in both subgroups. Two knees had radiographic evidence of nonprogressive tibial radiolucencies. The probability of survival for all knees (revision as the end point) was 76% +/- 9% at 5 years. We confirmed the previously reported high mortality and subsequent failure rates following revision total knee arthroplasty for both mechanical issues and infection in patients with rheumatoid arthritis and emphasize the potential difficulties in treating these patients. LEVEL OF EVIDENCE: Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Incidence of postthrombotic syndrome in patients undergoing primary total knee arthroplasty for osteoarthritis.

UNLABELLED: Postthrombotic syndrome (PTS) is characterized by edema, venous ectasia, hyperpigmentation, varicose veins, venous ulceration, and pain with calf compression after deep venous thrombosis (DVT). We determined the incidence of PTS after DVT diagnosed on screening ultrasound in patients undergoing primary total knee arthroplasty (TKA) for osteoarthritis (OA). We retrospectively reviewed the records of 1406 patients who underwent primary TKA for osteoarthritis and compared the incidence of PTS in patients without and with DVT. All patients had postoperative screening ultrasound. From these 1406 patients we identified 66 (4.7%) who had DVT, 50 of whom had a minimum of 1 year followup (mean, 4.97 years; range, 1.00-7.53 years). PTS was diagnosed if any two of six signs were documented in the medical record. Three of 50 patients with DVT (6%) had signs consistent with PTS; two of these three had a DVT proximal to the soleal arch. Seven (8%) of 88 patients randomly chosen for primary TKA because of OA with similar mean age and gender, but without DVT, had signs of PTS. PTS does not seem to be a major sequela of DVT in patients undergoing primary TKA for OA. LEVEL OF EVIDENCE: Level III, therapeutic study. See the Guidelines for Authors for a complete description of levels of evidence.

Isolated resurfacing of the previously unresurfaced patella total knee arthroplasty.

Postoperative anterior knee pain can be challenging after primary total knee arthroplasty. Isolated patellar resurfacing may provide symptomatic improvement in those patients with an unresurfaced patella. Seventeen isolated patellar resurfacing procedures were performed. Patient outcomes were evaluated using the Knee Society clinical and roentgenographic evaluation systems. Continued symptomatology and overall patient satisfaction were also analyzed. No revisions have been necessary at 47 months of follow-up. Overall, Knee Society knee scores and knee function scores significantly improved. Eight patients (53%) are asymptomatic and were satisfied with the procedure, whereas 7 patients (47%) continue to have anterior knee pain and are unsatisfied. Isolated patellar resurfacing for anterior knee pain in total knee arthroplasty with an unresurfaced patella has a low morbidity and revision rate but may not provide patients with predictable symptomatic improvement.

Reasons for revision of first-generation highly cross-linked polyethylenes.

Over a 10-year period, we prospectively evaluated the reasons for revision of contemporary and highly cross-linked polyethylene formulations in amulticenter retrieval program. Two hundred twelve consecutive retrievals were classified as conventional gamma inert sterilized (n = 37), annealed (Cross fire,[Stryker Orthopedics, Mahwah, NJ] n = 72), or remelted (Longevity [Zimmer ,Warsaw, Ind], XLPE[Smith and Nephew, Memphis, Tenn], Durasul [Zimmer,Warsaw, Ind] n = 103) liners. The most frequent reasons for revision were loosening (35%), instability(28%), and infection (21%) and were not related to polyethylene formulation (P = .17). Annealed and remelted liners had comparable linear penetration rates(0.03 and 0.04 mm/y, respectively, on average), and these were significantly lower than the rate in conventional retrievals (0.11 mm/y, P ≤ .0005). This retrieval study including first-generation highly cross linked liners demonstrated lower wear than conventional polyethylene. Although loosening remained as the most prevalent reason for revision, we could not demonstrate a relationship between wear and loosening.The long-term clinical performance of first-generation highly cross-linked liners remains promising based on the midterm outcomes of the components documented in this study [corrected].

Are Readmissions After Total Knee Arthroplasty Preventable?

Readmission within 90 days following total joint arthroplasty has become a central quality measure of reimbursement initiatives; however, the validity of readmission rates as a measure of hospital care quality and the proportion of readmissions that are preventable are unknown. The purpose of this study is to determine if readmissions within 30 and 90 days after total knee arthroplasty (TKA) were related to orthopaedic or medical etiology and identify if these readmissions were preventable. We retrospectively reviewed 1,625 elective TKAs performed between 2011 and 2014 at our institution. Readmissions within 30 and 90 days were categorized into orthopaedic and medical etiologies and an expert research panel determined if readmissions were potentially preventable based on objective criteria from national or peer-reviewed consensus guidelines. Out of the 1,625 TKAs performed during the study period, there were a total of 79 (4.8%) readmissions within 90 days of surgery, of which 17 (22%) were of orthopaedic etiology and 62 (78%) were of medical etiology. Fifty-two (66%) of the 79 readmissions occurred within 30 days, with 11 (21%) of orthopaedic and 41 (80%) of medical etiology. Only 2 of 79 (3%) readmissions within 90 days were deemed potentially preventable, and neither of them were orthopaedic in nature. Hospital readmissions after total joint arthroplasty are inevitable; however, only a small percentage (3%) of readmissions to our health care system was potentially preventable. Orthopaedic readmissions constituted a minority of the proportion of readmissions at 30 or 90 days, and none were deemed preventable.