Effect of Fe-O ReaxFF on Liquid Iron Oxide Properties Derived from Reactive Molecular Dynamics.

As iron powder nowadays attracts research attention as a carbon-free, circular energy carrier, molecular dynamics (MD) simulations can be used to better understand the mechanisms of liquid iron oxidation at elevated temperatures. However, prudence must be practiced in the selection of a reactive force field. This work investigates the influence of currently available reactive force fields (ReaxFFs) on a number of properties of the liquid iron-oxygen (Fe-O) system derived (or resulting) from MD simulations. Liquid Fe-O systems are considered over a range of oxidation degrees ZO, which represents the molar ratio of O/(O + Fe), with 0 < ZO < 0.6 and at a constant temperature of 2000 K, which is representative of the combustion temperature of micrometric iron particles burning in air. The investigated properties include the minimum energy path, system structure, (im)miscibility, transport properties, and the mass and thermal accommodation coefficients. The properties are compared to experimental values and thermodynamic calculation results if available. Results show that there are significant differences in the properties obtained with MD using the various ReaxFF parameter sets. Based on the available experimental data and equilibrium calculation results, an improved ReaxFF is required to better capture the properties of a liquid Fe-O system.

Atomistic insight into the effects of electrostatic fields on hydrocarbon reaction kinetics.

Reactive Molecular Dynamics (MD) and Density Functional Theory (DFT) computations are performed to provide insight into the effects of external electrostatic fields on hydrocarbon reaction kinetics. By comparing the results from MD and DFT, the suitability of the MD method in modeling electrodynamics is first assessed. Results show that the electric field-induced polarization predicted by the MD charge equilibration method is in good agreement with various DFT charge partitioning schemes. Then, the effects of oriented external electric fields on the transition pathways of non-redox reactions are investigated. Results on the minimum energy path suggest that electric fields can cause catalysis or inhibition of oxidation reactions, whereas pyrolysis reactions are not affected due to the weaker electronegativity of the hydrogen and carbon atoms. MD simulations of isolated reactions show that the reaction kinetics is also affected by applied external Lorentz forces and interatomic Coulomb forces since they can increase or decrease the energy of collision depending on the molecular conformation. In addition, electric fields can affect the kinetics of polar species and force them to align in the direction of field lines. These effects are attributed to energy transfer via intermolecular collisions and stabilization under the external Lorentz force. The kinetics of apolar species is not significantly affected mainly due to the weak induced dipole moment even under strong electric fields. The dynamics and reaction rates of species are studied by means of large-scale combustion simulations of n-dodecane and oxygen mixtures. Results show that under strong electric fields, the fuel, oxidizer, and most product molecules experience translational and rotational acceleration mainly due to close charge transfer along with a reduction in their vibrational energy due to stabilization. This study will serve as a basis to improve the current methods used in MD and to develop novel methodologies for the modeling of macroscale reacting flows under external electrostatic fields.

Reactive Molecular Dynamics Investigation of Toluene Oxidation under Electrostatic Fields: Effect of the Modeling of Local Charge Distribution.

A reactive Molecular Dynamics (MD) study of toluene oxidation at high temperatures under externally applied electrostatic fields has been performed. The impact of the modeling of local charge distribution has been investigated by comparing the widely used Charge Equilibration (QEq) method with the Charge Transfer with Polarization Current Equalization (QTPIE) method, which shields charge transfers up to atomic orbitals and introduces molecular polarization. Using the latter method, it is possible to improve the computation of the atomic charges, which are a critical aspect for the numerical study of electric fields, and to capture important effects of the electric field on rotational and vibrational energies of the toluene molecule. Results show that a more comprehensive treatment of inter- and intramolecular charge distribution achieved through the QTPIE method leads to substantially different applied forces and oxidation rates of toluene compared to the QEq method. Using the QTPIE method, no significant effects of the electrostatic field on the toluene oxidation rate were observed for the range of temperatures and pressures studied here, which is in disagreement with the results obtained with the QEq method where a clear impact of the electrostatic field on the average oxidation rate was found. Therefore, when studying electric field effects with MD simulations, the choice of the method used for the charge equilibration is a key modeling assumption whose impact should be carefully evaluated.

Effect of Electric Fields on the Decomposition of Phosphate Esters.

Phosphate esters decompose on metal surfaces and form protective polyphosphate films. For many applications, such as in lubricants for electric vehicles and wind turbines, an understanding of the effect of electric fields on molecular decomposition is urgently required. Experimental investigations have yielded contradictory results, with some suggesting that electric fields improve tribological performance, while others have reported the opposite effect. Here, we use nonequilibrium molecular dynamics (NEMD) simulations to study the decomposition of tri-n-butyl phosphate (TNBP) molecules nanoconfined between ferrous surfaces (iron and iron oxide) under electrostatic fields. The reactive force field (ReaxFF) method is used to model the effects of chemical bonding and molecular dissociation. We show that the charge transfer with the polarization current equalization (QTPIE) method gives more realistic behavior compared to the standard charge equilibration (QEq) method under applied electrostatic fields. The rate of TNBP decomposition via carbon-oxygen bond dissociation is faster in the nanoconfined systems than that in the bulk due to the catalytic action of the surfaces. In all cases, the application of an electric field accelerates TNBP decomposition. When electric fields are applied to the confined systems, the phosphate anions are pulled toward the surface with high electric potential, while the alkyl cations are pulled to the surface with lower potential, leading to asymmetric film growth. Analysis of the temperature- and electric field strength-dependent dissociation rate constants using the Arrhenius equation suggests that, on reactive iron surfaces, the increased reactivity under an applied electric field is driven mostly by an increase in the pre-exponential factor, which is linked to the number of molecule-surface collisions. Conversely, the accelerated decomposition of TNBP on iron oxide surfaces can be attributed to a reduction in the activation energy with increasing electric field strength. Single-molecule nudged-elastic band (NEB) calculations also show a linear reduction in the energy barrier for carbon-oxygen bond breaking with electric field strength, due to stabilization of the charged transition state. The simulation results are consistent with experimental observations of enhanced and asymmetric tribofilm growth under electrostatic fields.