Beyond the Surface: A Methodological Exploration of Enzyme Impact along the Cellulose Fiber Cross-Section.

Despite the wide range of analytical tools available for the characterization of cellulose, the in-depth characterization of inhomogeneous, layered cellulose fiber structures remains a challenge. When treating fibers or spinning man-made fibers, the question always arises as to whether the changes in the fiber structure affect only the surface or the entire fiber. Here, we developed an analysis tool based on the sequential limited dissolution of cellulose fiber layers. The method can reveal potential differences in fiber properties along the cross-sectional profile of natural or man-made cellulose fibers. In this analytical approach, carbonyl groups are labeled with a carbonyl selective fluorescence label (CCOA), after which thin fiber layers are sequentially dissolved with the solvent system DMAc/LiCl (9% w/v) and analyzed with size exclusion chromatography coupled with light scattering and fluorescence detection. The analysis of these fractions allowed for the recording of the changes in the chemical structure across the layers, resulting in a detailed cross-sectional profile of the different functionalities and molecular weight distributions. The method was optimized and tested in practice with LPMO (lytic polysaccharide monooxygenase)-treated cotton fibers, where it revealed the depth of fiber modification by the enzyme.

Cellulases adsorb reversibly on biomass lignin.

Adsorption of cellulases onto lignin is considered a major factor in retarding enzymatic cellulose degradation of lignocellulosic biomass. However, the adsorption mechanisms and kinetics are not well understood for individual types of cellulases. This study examines the binding affinity, kinetics of adsorption, and competition of four monocomponent cellulases of Trichoderma reesei during adsorption onto lignin. TrCel7A, TrCel6A, TrCel7B, and TrCel5A were radiolabeled for adsorption experiments on lignin-rich residues (LRRs) isolated from hydrothermally pretreated spruce (L-HPS) and wheat straw (L-HPWS), respectively. On the basis of adsorption isotherms fitted to the Langmuir model, the ranking of binding affinities was TrCel5A > TrCel6A > TrCel7B > TrCel7A on both types of LRRs. The enzymes had a higher affinity to the L-HPS than to the L-HPWS. Adsorption experiments with dilution after 1 and 24 hr and kinetic modeling were performed to quantify any irreversible binding over time. Models with reversible binding parameters fitted well and can explain the results obtained. The adsorption constants obtained from the reversible models agreed with the fitted Langmuir isotherms and suggested that reversible adsorption-desorption existed at equilibrium. Competitive binding experiments showed that individual types of cellulases competed for binding sites on the lignin and the adsorption data fitted the Langmuir adsorption model. Overall, the data strongly indicate that the adsorption of cellulases onto lignin is reversible and the findings have implications for the development of more efficient cellulose degrading enzymes.

Enzyme biotechnology in degradation and modification of plant cell wall polymers.

Lignocelluloses are abundant raw materials for production of fuels, chemicals and materials. The purpose of this paper is to review the enzyme-types and enzyme-technologies studied and applied in the processing of the lignocelluloses into different products. The enzymes here are mostly glycoside hydrolases, esterases and different redox enzymes. Enzymatic hydrolysis of lignocellulosic polysaccharides to platform sugars has been widely studied leading to development of advanced commercial products for this purpose. Restricted hydrolysis or oxidation of cellulosic fibers have been applied in processing of pulps to paper products, nanocelluloses and textile fibers. Oxidation, transglycosylation and derivatization have been utilized in functionalization of fibers, cellulosic surfaces and polysaccharides. Enzymatic polymerization, depolymerization and grafting methods are being developed for lignin valorization.

A Novel Colletotrichum graminicola Raffinose Oxidase in the AA5 Family.

We describe here the identification and characterization of a copper radical oxidase from auxiliary activities family 5 (AA5_2) that was distinguished by showing preferential activity toward raffinose. Despite the biotechnological potential of carbohydrate oxidases from family AA5, very few members have been characterized. The gene encoding raffinose oxidase from Colletotrichum graminicola (CgRaOx; EC 1.1.3.-) was identified utilizing a bioinformatics approach based on the known modular structure of a characterized AA5_2 galactose oxidase. CgRaOx was expressed in Pichia pastoris, and the purified enzyme displayed the highest activity on the trisaccharide raffinose, whereas the activity on the disaccharide melibiose was three times lower and more than ten times lower activity was detected on d-galactose at a 300 mM substrate concentration. Thus, the substrate preference of CgRaOx was distinguished clearly from the substrate preferences of the known galactose oxidases. The site of oxidation for raffinose was studied by 1H nuclear magnetic resonance and mass spectrometry, and we confirmed that the hydroxyl group at the C-6 position was oxidized to an aldehyde and that in addition uronic acid was produced as a side product. A new electrospray ionization mass spectrometry method for the identification of C-6 oxidized products was developed, and the formation mechanism of the uronic acid was studied. CgRaOx presented a novel activity pattern in the AA5 family.IMPORTANCE Currently, there are only a few characterized members of the CAZy AA5 protein family. These enzymes are interesting from an application point of view because of their ability to utilize the cheap and abundant oxidant O2 without the requirement of complex cofactors such as FAD or NAD(P). Here, we present the identification and characterization of a novel AA5 member from Colletotrichum graminicola As discussed in the present study, the bioinformatics approach using the modular structure of galactose oxidase was successful in finding a C-6 hydroxyl carbohydrate oxidase having substrate preference for the trisaccharide raffinose. By the discovery of this activity, the diversity of the CAZy AA5 family is increasing.

Characterization of sulfhydryl oxidase from Aspergillus tubingensis.

BACKGROUND: Despite of the presence of sulfhydryl oxidases (SOXs) in the secretomes of industrially relevant organisms and their many potential applications, only few of these enzymes have been biochemically characterized. In addition, basic functions of most of the SOX enzymes reported so far are not fully understood. In particular, the physiological role of secreted fungal SOXs is unclear. RESULTS: The recently identified SOX from Aspergillus tubingensis (AtSOX) was produced, purified and characterized in the present work. AtSOX had a pH optimum of 6.5, and showed a good pH stability retaining more than 80% of the initial activity in a pH range 4-8.5 within 20 h. More than 70% of the initial activity was retained after incubation at 50 °C for 20 h. AtSOX contains a non-covalently bound flavin cofactor. The enzyme oxidised a sulfhydryl group of glutathione to form a disulfide bond, as verified by nuclear magnetic resonance spectroscopy. AtSOX preferred glutathione as a substrate over cysteine and dithiothreitol. The activity of the enzyme was totally inhibited by 10 mM zinc sulphate. Peptide- and protein-bound sulfhydryl groups in bikunin, gliotoxin, holomycin, insulin B chain, and ribonuclease A, were not oxidised by the enzyme. Based on the analysis of 33 fungal genomes, SOX enzyme encoding genes were found close to nonribosomal peptide synthetases (NRPS) but not with polyketide synthases (PKS). In the phylogenetic tree, constructed from 25 SOX and thioredoxin reductase sequences from IPR000103 InterPro family, AtSOX was evolutionary closely related to other Aspergillus SOXs. Oxidoreductases involved in the maturation of nonribosomal peptides of fungal and bacterial origin, namely GliT, HlmI and DepH, were also evolutionary closely related to AtSOX whereas fungal thioreductases were more distant. CONCLUSIONS: AtSOX (55 kDa) is a fungal secreted flavin-dependent enzyme with good stability to both pH and temperature. A Michaelis-Menten behaviour was observed with reduced glutathione as a substrate. Based on the location of SOX enzyme encoding genes close to NRPSs, SOXs could be involved in the secondary metabolism and act as an accessory enzyme in the production of nonribosomal peptides.

Lignin Films from Spruce, Eucalyptus, and Wheat Straw Studied with Electroacoustic and Optical Sensors: Effect of Composition and Electrostatic Screening on Enzyme Binding.

Lignins were isolated from spruce, wheat straw, and eucalyptus by using the milled wood lignin (MWL) method. Functional groups and compositional analyses were assessed via 2D NMR and 31P NMR to realize their effect on enzyme binding. Films of the lignins were fabricated and ellipsometry, atomic force microscopy, and water contact angle measurements were used for their characterization and to reveal the changes upon enzyme adsorption. Moreover, lignin thin films were deposited on quartz crystal microgravimetry (QCM) and surface plasmon (SPR) resonance sensors and used to gain further insights into the lignin-cellulase interactions. For this purpose, a commercial multicomponent enzyme system and a monocomponent Trichoderma reesei exoglucanase (CBH-I) were considered. Strong enzyme adsorption was observed on the various lignins but compared to the multicomponent cellulases, CBH-I displayed lower surface affinity and higher binding reversibility. This resolved prevalent questions related to the affinity of this enzyme with lignin. Remarkably, a strong correlation between enzyme binding and the syringyl/guaiacyl (S/G) ratio was found for the lignins, which presented a similar hydroxyl group content (31P NMR): higher protein affinity was determined on isolated spruce lignin (99% G units), while the lowest adsorption occurred on isolated eucalyptus lignin (70% S units). The effect of electrostatic interactions in enzyme adsorption was investigated by SPR, which clearly indicated that the screening of charges allowed more extensive protein adsorption. Overall, this work furthers our understanding of lignin-cellulase interactions relevant to biomass that has been subjected to no or little pretreatment and highlights the widely contrasting effects of the nature of lignin, which gives guidance to improve lignocellulosic saccharification and related processes.

Cellulose hydrolysis and binding with Trichoderma reesei Cel5A and Cel7A and their core domains in ionic liquid solutions.

Ionic liquids (ILs) dissolve lignocellulosic biomass and have a high potential as pretreatment prior to total enzymatic hydrolysis. ILs are, however, known to inactivate cellulases. In this article, enzymatic hydrolysis of microcrystalline cellulose (MCC) and enzyme binding onto the cellulosic substrate were studied in the presence of cellulose-dissolving ILs. Two different ILs, 1,3-dimethylimidazolium dimethylphosphate ([DMIM]DMP) and 1-ethyl-3-methylimidazolium acetate ([EMIM]AcO), and two monocomponent cellulases, Trichoderma reesei cellobiohydrolase Cel7A and endoglucanase Cel5A, were used in the study. The role and IL sensitivity of the carbohydrate-binding module (CBM) were studied by performing hydrolysis and binding experiments with both the intact cellulases, and their respective core domains (CDs). Based on hydrolysis yields and substrate binding experiments for the intact enzymes and their CDs in the presence of ILs, the function of the CBM appeared to be very IL sensitive. Binding data suggested that the CBM was more important for the substrate binding of endoglucanase Cel5A than for the binding of cellobiohydrolase Cel7A. The CD of Cel7A was able to bind well to cellulose even without a CBM, whereas Cel5A CD had very low binding affinity. Hydrolysis also occurred with Cel5A CD even if this protein had very low binding affinity in all the studied matrices. Binding and hydrolysis were less affected by the studied ILs for Cel7A than for Cel5A. To our knowledge, this is the first systematic study of IL effects on cellulase substrate binding.

Oxidation of cellulose fibers using LPMOs with varying allomorphic substrate preferences, oxidative regioselectivities, and domain structures.

Lytic polysaccharide monooxygenases (LPMOs) are excellent candidates for enzymatic functionalization of natural polysaccharides, such as cellulose or chitin, and are gaining relevance in the search for renewable biomaterials. Here, we assessed the cellulose fiber modification potential and catalytic performance of eleven cellulose-active fungal AA9-type LPMOs, including C1-, C4-, and C1/C4-oxidizing LPMOs with and without CBM1 carbohydrate-binding modules, on cellulosic substrates with different degrees of crystallinity and polymer chain arrangement, namely, Cellulose I, Cellulose II, and amorphous cellulose. The potential of LPMOs for cellulose fiber modification varied among the LPMOs and depended primarily on operational stability and substrate binding, and, to some extent, also on regioselectivity and domain structure. While all tested LPMOs were active on natural Cellulose I-type fibers, activity on the Cellulose II allomorph was almost exclusively detected for LPMOs containing a CBM1 and LPMOs with activity on soluble hemicelluloses and cello-oligosaccharides, for example NcAA9C from Neurospora crassa. The single-domain variant of NcAA9C oxidized the cellulose fibers to a higher extent than its CBM-containing natural variant and released less soluble products, indicating a more dispersed oxidation pattern without a CBM. Our findings reveal great functional variation among cellulose-active LPMOs, laying the groundwork for further LPMO-based cellulose engineering.

A novel approach to analyze the impact of lytic polysaccharide monooxygenases (LPMOs) on cellulosic fibres.

Enzymatic treatment of cellulosic fibres is a green alternative to classical chemical modification. For many applications, mild procedures for cellulose alteration are sufficient, in which the fibre structure and, therefore, the mechanical performance of cellulosic fibres are preserved. Lytic polysaccharide monooxygenases (LPMOs) bear a great potential to become a green reagent for such targeted cellulose modifications. An obstacle for wide implementation of LPMOs in tailored cellulose chemistry is the lack of suitable techniques to precisely monitor the LPMO impact on the polymer. Soluble oxidized cello-oligomers can be quantified using chromatographic and mass-spectrometric techniques. A considerable portion of the oxidized sites, however, remain on the insoluble cellulose fibres, and their quantification is difficult. Here, we describe a method for the simultaneous quantification of oxidized sites on cellulose fibres and changes in their molar mass distribution after treatment with LPMOs. The method is based on quantitative, heterogeneous, carbonyl-selective labelling with a fluorescent label (CCOA) followed by cellulose dissolution and size-exclusion chromatography (SEC). Application of the method to reactions of seven different LPMOs with pure cellulose fibres revealed pronounced functional differences between the enzymes, showing that this CCOA/SEC/MALS method is a promising tool to better understand the catalytic action of LPMOs.

Extracellular tyrosinase from the fungus Trichoderma reesei shows product inhibition and different inhibition mechanism from the intracellular tyrosinase from Agaricus bisporus.

Tyrosinase (EC 1.14.18.1) is a widely distributed type 3 copper enzyme participating in essential biological functions. Tyrosinases are potential biotools as biosensors or protein crosslinkers. Understanding the reaction mechanism of tyrosinases is fundamental for developing tyrosinase-based applications. The reaction mechanisms of tyrosinases from Trichoderma reesei (TrT) and Agaricus bisporus (AbT) were analyzed using three diphenolic substrates: caffeic acid, L-DOPA (3,4-dihydroxy-l-phenylalanine), and catechol. With caffeic acid the oxidation rates of TrT and AbT were comparable; whereas with L-DOPA or catechol a fast decrease in the oxidation rates was observed in the TrT-catalyzed reactions only, suggesting end product inhibition of TrT. Dopachrome was the only reaction end product formed by TrT- or AbT-catalyzed oxidation of L-DOPA. We produced dopachrome by AbT-catalyzed oxidation of L-DOPA and analyzed the TrT end product (i.e. dopachrome) inhibition by oxygen consumption measurement. In the presence of 1.5mM dopachrome the oxygen consumption rate of TrT on 8mM L-DOPA was halved. The type of inhibition of potential inhibitors for TrT was studied using p-coumaric acid (monophenol) and caffeic acid (diphenol) as substrates. The strongest inhibitors were potassium cyanide for the TrT-monophenolase activity, and kojic acid for the TrT-diphenolase activity. The lag period related to the TrT-catalyzed oxidation of monophenol was prolonged by kojic acid, sodium azide and arbutin; contrary it was reduced by potassium cyanide. Furthermore, sodium azide slowed down the initial oxidation rate of TrT- and AbT-catalyzed oxidation of L-DOPA or catechol, but it also formed adducts with the reaction end products, i.e., dopachrome and o-benzoquinone.

The crystal structure of an extracellular catechol oxidase from the ascomycete fungus Aspergillus oryzae.

Catechol oxidases (EC 1.10.3.1) catalyse the oxidation of o-diphenols to their corresponding o-quinones. These oxidases contain two copper ions (CuA and CuB) within the so-called coupled type 3 copper site as found in tyrosinases (EC 1.14.18.1) and haemocyanins. The crystal structures of a limited number of bacterial and fungal tyrosinases and plant catechol oxidases have been solved. In this study, we present the first crystal structure of a fungal catechol oxidase from Aspergillus oryzae (AoCO4) at 2.5-Å resolution. AoCO4 belongs to the newly discovered family of short-tyrosinases, which are distinct from other tyrosinases and catechol oxidases because of their lack of the conserved C-terminal domain and differences in the histidine pattern for CuA. The sequence identity of AoCO4 with other structurally known enzymes is low (less than 30 %), and the crystal structure of AoCO4 diverges from that of enzymes belonging to the conventional tyrosinase family in several ways, particularly around the central α-helical core region. A diatomic oxygen moiety was identified as a bridging molecule between the two copper ions CuA and CuB separated by a distance of 4.2-4.3 Å. The UV/vis absorption spectrum of AoCO4 exhibits a distinct maximum of absorbance at 350 nm, which has been reported to be typical of the oxy form of type 3 copper enzymes.

Preferential adsorption and activity of monocomponent cellulases on lignocellulose thin films with varying lignin content.

Understanding the enzymatic hydrolysis of cellulose and the influence of lignin in the process are critical for viable production of fuels and chemicals from lignocellulosic biomass. The interactions of monocomponent cellulases with cellulose and lignin substrates were investigated by using thin films supported on quartz crystal microgravimetry (QCM) resonators. Trichoderma reesei exoglucanase (CBH-I) and endoglucanase (EG-I) bound strongly to both cellulose and lignin but EG-I exhibited a distinctive higher affinity with lignin, causing a more extensive inhibition of the cellulolytic reactions. CBH-I was found to penetrate into the bulk of the cellulose substrate increasing the extent of hydrolysis and film deconstruction. In the absence of a cellulose binding domain (CBD) and a linker, the CBH-I core adsorbed slowly and was not able to penetrate into the film. Conversely to CBH-I, EG-I exhibited activity only on the surface of the lignocellulose substrate even when containing a CBD and a linker. Interestingly, EG-I displayed a clearly different interaction profile as a function of contact time registered by QCM.

On the factors affecting product distribution in laccase-catalyzed oxidation of a lignin model compound vanillyl alcohol: experimental and computational evaluation.

Laccases (EC 1.10.3.2) are multicopper oxidases, which can oxidize phenolic substrates by the concomitant reduction of oxygen to water. The phenolic substructures of lignin are also oxidized by laccases, resulting mainly in various polymerized products. Several model compound studies indicate that variations in the reaction media, such as the pH and the enzyme dosage used, have an impact on the observed product distribution of laccase promoted oxidation, but no detailed study has been reported to explain these results. In the present study, a monomeric lignin model compound, vanillyl alcohol, was oxidized in laccase-catalyzed reactions by varying the pH, enzyme dosage and temperature. The energies of all the observed products and potential intermediates were calculated by applying density functional theory (DFT) and the polarizable continuum solvation model (PCM). The observed predominant product at pH 4.5 to 7.5 was clearly the 5-5' dimer, although the thermodynamic product according to the calculated free energies was vanillin, the difference being 5.6 kcal mol(-1). The hydrogen bonding is shown to give an additional stabilizing effect on the transition state leading to the 5-5' dimer, but also a kinetic barrier reduces the formation of vanillin. Based on the calculated pKa-values of the proposed intermediates we suggest that the rearomatization reactions of the quinones formed in the radical reactions under mildly acidic and neutral conditions would preferentially occur through deprotonation rather than through protonation.

Discovery of novel secreted fungal sulfhydryl oxidases with a plate test screen.

Sulfhydryl oxidases (SOX) are FAD-dependent enzymes capable of oxidising free thiol groups and forming disulphide bonds. Although the quantity of scientific papers and suggested applications for SOX is constantly increasing, only a limited number of microbial SOX have been reported and are commercially available. Hence, the aim of this study was to develop a fast and reliable qualitative plate test for screening novel secreted fungal SOX. The screening was based on the Ellman's reagent, i.e. 5,5'-dithiobis[2-nitrobenzoic acid]. Altogether, 32 fungal strains from an in-house culture collection were screened. A total of 13 SOX-producing strains were found positive in the plate test screen. The novel SOX producers were Aspergillus tubingensis, Chaetomium globusum, Melanocarpus albomyces, Penicillium aurantiogriseum, Penicillium funiculosum, Coniophora puteana and Trametes hirsuta. Six of the discovered SOX were partially characterised by determination of isoelectric point, pH optimum and substrate specificity. A. tubingensis was identified as the most efficient novel SOX producer.

Inhibitory effect of lignin on the hydrolysis of xylan by thermophilic and thermolabile GH11 xylanases.

BACKGROUND: Enzymatic hydrolysis of lignocellulosic biomass into platform sugars can be enhanced by the addition of accessory enzymes, such as xylanases. Lignin from steam pretreated biomasses is known to inhibit enzymes by non-productively binding enzymes and limiting access to cellulose. The effect of enzymatically isolated lignin on the hydrolysis of xylan by four glycoside hydrolase (GH) family 11 xylanases was studied. Two xylanases from the mesophilic Trichoderma reesei, TrXyn1, TrXyn2, and two forms of a thermostable metagenomic xylanase Xyl40 were compared. RESULTS: Lignin isolated from steam pretreated spruce decreased the hydrolysis yields of xylan for all the xylanases at 40 and 50 °C. At elevated hydrolysis temperature of 50 °C, the least thermostable xylanase TrXyn1 was most inhibited by lignin and the most thermostable xylanase, the catalytic domain (CD) of Xyl40, was least inhibited by lignin. Enzyme activity and binding to lignin were studied after incubation of the xylanases with lignin for up to 24 h at 40 °C. All the studied xylanases bound to lignin, but the thermostable xylanases retained 22-39% of activity on the lignin surface for 24 h, whereas the mesophilic T. reesei xylanases become inactive. Removing of N-glycans from the catalytic domain of Xyl40 increased lignin inhibition in hydrolysis of xylan when compared to the glycosylated form. By comparing the 3D structures of these xylanases, features contributing to the increased thermal stability of Xyl40 were identified. CONCLUSIONS: High thermal stability of xylanases Xyl40 and Xyl40-CD enabled the enzymes to remain partially active on the lignin surface. N-glycosylation of the catalytic domain of Xyl40 increased the lignin tolerance of the enzyme. Thermostability of Xyl40 was most likely contributed by a disulphide bond and salt bridge in the N-terminal and α-helix regions.

Probing the dioxygen route in Melanocarpus albomyces laccase with pressurized xenon gas.

Laccases catalyze the oxidation of phenolic substrates and the concominant reduction of dioxygen to water. We used xenon as an oxygen probe in search of routes for the entry of dioxygen into the catalytic center. Two xenon-pressurized crystal structures of recombinant Melanocarpus albomyces laccase were determined, showing three hydrophobic Xe-binding sites located in domain C. The analysis of hydrophobic cavities in other laccase structures further suggested the preference of domain C for binding of hydrophobic species such as dioxygen, thus suggesting that the hydrophobic core of domain C could function as a channel through which dioxygen can enter the trinuclear copper center.

Inhibition of enzymatic hydrolysis by residual lignins from softwood--study of enzyme binding and inactivation on lignin-rich surface.

Lignin-derived inhibition is a major obstacle restricting the enzymatic hydrolysis of cell wall polysaccharides especially with softwood lignocellulosics. Enzyme adsorption on lignin is suggested to contribute to the inhibitory effect of lignin. The interaction of cellulases with softwood lignin was studied in the present work with commercial Trichoderma reesei cellulases (Celluclast) and lignin-rich residues isolated from steam pretreated softwood (SPS) by enzymatic and acid hydrolysis. Both lignin preparations inhibited the hydrolysis of microcrystalline cellulose (Avicel) and adsorbed the major cellulases present in the commercial cellulase mixture. The adsorption phenomenon was studied at low temperature (4°C) and at the typical hydrolysis temperature (45°C) by following activities of free and lignin-bound enzymes. Severe inactivation of the lignin-bound enzymes was observed at 45°C, however at 4°C the enzymes retained well their activity. Furthermore, SDS-PAGE analysis of the lignin-bound enzymes indicated that very strong interactions form between the residue and the enzymes at 45°C, because the enzymes were not released from the residue in the electrophoresis. These results suggest that heat-induced denaturation may take place on the surface of softwood lignin at the hydrolysis temperature.

Crystallization and preliminary X-ray analysis of Aspergillus oryzae catechol oxidase.

Catechol oxidase is an enzyme that catalyzes the oxidation of o-diphenols to the corresponding o-quinones. It is a copper-containing enzyme with a binuclear copper active site. Here, the crystallization and multiple-wavelength anomalous dispersion data collection of catechol oxidase from the mould fungus Aspergillus oryzae are described. During the purification, three forms of the enzyme (39.3, 40.5 and 44.3 kDa) were obtained. A mixture of these three forms was initially crystallized and gave crystals that diffracted to 2.5 Šresolution and belonged to space group P3(2)21, with unit-cell parameters a = b = 118.9, c = 84.5 Å, α = ß = 90, γ = 120°. A preparation containing only the shorter form (39.3 kDa) produced crystals that diffracted to 2.9 Šresolution and belonged to space group P2(1)2(1)2(1), with unit-cell parameters a = 51.8, b = 95.3, c = 139.5 Å, α = ß = γ = 90°.

Production and characterisation of AoSOX2 from Aspergillus oryzae, a novel flavin-dependent sulfhydryl oxidase with good pH and temperature stability.

Sulfhydryl oxidases have found application in the improvement of both dairy and baking products due to their ability to oxidise thiol groups in small molecules and cysteine residues in proteins. A genome mining study of the available fungal genomes had previously been performed by our group in order to identify novel sulfhydryl oxidases suitable for industrial applications and a representative enzyme was produced, AoSOX1 from Aspergillus oryzae (Faccio et al. BMC Biochem 11:31, 2010). As a result of the study, a second gene coding for a potentially secreted sulfhydryl oxidase, AoSOX2, was identified in the genome of A. oryzae. The protein AoSOX2 was heterologously expressed in Trichoderma reesei and characterised with regard to both biochemical properties as well as preliminary structural analysis. AoSOX2 showed activity on dithiothreitol and glutathione, and to a lesser extent on D/L-cysteine and beta-mercaptoethanol. AoSOX2 was a homodimeric flavin-dependent protein of approximately 78 kDa (monomer 42412 Da) and its secondary structure presents alpha-helical elements. A. oryzae AoSOX2 showed a significant stability to pH and temperature.

Sulfhydryl oxidases: sources, properties, production and applications.

The formation of disulfide bonds in proteins and small molecules can greatly affect their functionality. Sulfhydryl oxidases (SOXs) are enzymes capable of oxidising the free sulfhydryl groups in proteins and thiol-containing small molecules by using molecular oxygen as an electron acceptor. SOXs have been isolated from the intracellular compartments of many organisms, but also secreted SOXs are known. These latter enzymes are generally active on small compounds and their physiological role is unknown, whereas the intracellular enzymes prefer proteins as substrates and are involved in protein folding. An increasing number of scientific publications and patent applications on SOXs have been published in recent years. The present mini-review provides an up-to-date summary of SOXs from various families, their production and their actual or suggested applications. The sequence features and domain organisation of the characterised SOXs are reviewed, and special attention is paid to the physicochemical features of the enzymes. A review of patents and patent applications regarding this class of enzymes is also provided.