RESUMEN
Nanoparticles (NPs) may have great potential for various subsurface applications, including oil and gas recovery, reservoir imaging, and environmental remediation. One of the important challenges for these downhole applications is to achieve colloidal stability in subsurface media at high salinity and high temperature. It has been previously shown that several functional NPs "multipoint"-grafted with anionic poly(2-acrylamido-2-methyl-1-propanesulfonate-co-acrylic acid; AMPS-co-AA) exhibited remarkable colloidal stabilities in specific environments mimicking the harsh subsurface aquatic media, such as the American Petroleum Institute (API) brine. However, many important properties of such particles, other than the colloidal stabilities, must be studied in a more systematic fashion for a wide range of salt concentrations (Cs). Herein, we investigate various properties of the silica (SiO2) NPs multipoint-grafted with poly(AMPS-co-AA), SiO2-g-poly(AMPS-co-AA), in NaCl and CaCl2 solutions across a range of salinities. The brush behavior of the grafted random copolymers was investigated in both salt solutions from salt-free conditions up to extreme salinities. The particles displayed brine-oil interfacial activity with increasing Cs, stabilizing oil-in-brine emulsions as Pickering emulsifiers. A high internal phase emulsion (HIPE) with an internal oil phase of up to 80 vol % could be formed in CaCl2 solutions at high Cs, which exhibited gel-like behaviors.
RESUMEN
Capillary suspensions are ternary solid-liquid-liquid systems produced via the addition of a small amount of secondary fluid to the bulk fluid that contained the dispersed solid particles. The secondary fluid could exert strong capillary forces between the particles and dramatically change the rheological properties of the suspension. So far, research has focused on capillary suspensions that consist of additive-free fluids, whereas capillary suspensions with additives, particularly those of large molecular weight that are highly relevant for industrial purposes, have been relatively less studied. In this study, we performed a systematic analysis of the properties of capillary suspensions that consist of paraffin oil (bulk phase), water (secondary phase), and α-Al2O3 microparticles (particle phase), in which the aqueous secondary phase contained an important eco-friendly polymeric binder, sodium alginate (SA). It was determined that the yield stress of the suspension increased significantly with the increase in the SA content in the aqueous secondary phase, which was attributed to the synergistic effect of the capillary force and hydrogen bonding force that may be related to the increase in the number of capillary bridges. The amounts of SA used to induce a significant change in the yield stress in this study were very small (<0.02% of the total sample volume). The addition of Ca2+ ions to the SA-containing secondary phase further increased the yield stress with possible gelation of the SA chains-in the presence of excess Ca2+ ions, however, the yield stress decreased because of the microscopic phase separation that occurred in the aqueous secondary phase. The microstructures of the sintered porous materials that were produced by using capillary suspensions as precursors were qualitatively well correlated to the rheological behavior of the precursor suspensions, suggesting a new method for the subtle control of the microstructures of porous materials using the addition of minute amounts of polymeric additives.
RESUMEN
Conductive metal inks with 3D-printable rheological properties have gained considerable attention, owing to their potential for manufacturing 3D electronics. Typically, such inks are formulated with high volume fractions of metal particles to achieve both rheological and electrical percolation. However, this leads to a high product cost and weight, making this approach potentially undesirable for practical application. In this study, naturally occurring ingredients, i.e., bee pollen microparticles (BPMPs) and citric acids (CAs), are used to produce a jammed hexane-in-aqueous suspension-type emulsion with controllable viscoelasticity as a template for conductive metal particles. Correspondingly, it is possible to develop 3D-printable, lightweight, and conductive inks. The BPMPs and CAs, as rheology modifiers, facilitate the 3D printability of the ink. After drying, the ink forms 3D networks without macroscopic discontinuities. Hexanes co-dispersed with BPMPs and CAs in the aqueous continuous phase improve the ink rheological processability and create internal macropores within the 3D-printed structure upon evaporation under ambient conditions, decreasing the product density. A conductive copper ink based on the emulsion template shows excellent 3D printability and electrical percolation at low metal loadings (<10 vol%); moreover, the printed ink with the optimized formulation has a remarkably low density (<2 g â cm-3).
Asunto(s)
Hexanos , Tinta , Emulsiones , Impresión Tridimensional , Cobre , ReologíaRESUMEN
MXenes, a new class of 2D materials, have recently attracted increasing attention as promising adsorbents for environmental remediation. It has been previously demonstrated that MXenes can successfully capture selected organic dyes from aqueous media; however, to date, the adsorption performance of MXenes for a wide variety of dyes in simulated real-life aquatic environments other than clean laboratory deionized (DI) water has not been systematically investigated. In this study, we systematically investigated the adsorption performance of delaminated Ti3C2-MXenes for six different organic dyes in aquatic media at different pH levels and ionic strengths. Our results strongly suggest the importance of the electrostatic interactions between the ionizable functional groups of MXenes and dyes for removal efficiency. The electrostatic repulsions between negatively charged MXenes and certain anionic dyes reduced the removal efficiencies of MXenes for these dyes in DI water; however, the presence of divalent cations significantly improved the removal efficiencies, possibly owing to the charge screening effects and like-charge attractions mediated by cation binding to the functionalities of dyes and MXenes. These results provide a rational strategy for optimizing the conditions for efficient removal of different types of organic dyes using MXenes.
RESUMEN
Three-dimensional (3D) printing technology is actively utilized in various industrial fields because it facilitates effective and customizable fabrication of complex structures. An important processing route for 3D printing is the extrusion of inks in the form of colloidal suspensions or emulsions, which has recently attracted considerable attention because it allows for selection of a wide range of printing materials and is operable under ambient processing conditions. Herein, we investigate the 3D printability of complex fluids containing chlorella microalgae as an eco-friendly material for 3D printing. Two possible ink types are considered: aqueous chlorella suspensions and emulsions of oil and water mixtures. While the aqueous chlorella suspensions at high particle loading display the 3D-printable rheological properties such as high yield stress and good shape retention, the final structures after extruding and drying the suspensions under ambient conditions show a significant number of macroscopic defects, limiting their practical application. In contrast, the 3D structures produced from the oil-in-water Pickering emulsions stabilized by chlorella microalgae, which are amphiphilic and active at the oil-water interface, show significantly reduced defect formation. Addition of a fast-evaporable oil phase, hexane, is crucial in the mechanisms of enhanced cementation between the individual microalgae via increased inter-particle packing, capillary attraction, and hydrophobic interaction. Furthermore, addition of solid paraffin wax, which is crystalline but well-soluble in the hydrocarbon oil phase under ambient conditions, completely eliminates the undesirable defect formation via enhanced inter-particle binding, while maintaining the overall rheological properties of the emulsion. The optimal formulation of the Pickering emulsion is finally employed to produce a 3D scaffold of satisfactory structural integrity, suggesting that the chlorella-based ink, in the form of an emulsion, has potential as an eco-friendly 3D printing ink processable under ambient conditions.
Asunto(s)
Chlorella , Microalgas , Emulsiones , Tinta , Impresión TridimensionalRESUMEN
MXenes, an emerging class of two-dimensional materials, are recently gaining significant attention for numerous environmental applications owing to their superior hydrophilicity and unique surface functionalities, which are suitable for adsorptive removal of various aqueous contaminants. However, it has recently been shown that MXenes have poor colloidal stability in both synthetic or natural waters containing small amounts of salt ions, which will limit the potential uses of MXenes in remediation of subsurface environments that might sometimes contain considerable amounts of salt ions, and other relevant environmental applications. Herein, we develop Ti3C2-MXenes grafted with highly salt-resistant polyelectrolytes (PEs), MXene-g-PEs, which are colloidally stable in extreme salinity aquatic environments and have low adsorption to soil mineral substrates. The MXenes grafted with zwitterionic PEs are found to have superior mobility properties to those with anionic PEs, which are attributed to the anti-PE behavior of the grafted polymer brushes. The MXene-g-(zwitterionic) PEs show long-term colloidal stability over 6 months in American Petroleum Institute (API) brine with extreme salinity (ionic strength of 2 M with 182.2 mM Ca2+), and little adsorption (0.5 mg m-2) against α-alumina surfaces (2.3 m2 g-1). Furthermore, the MXene-g-PEs retained the excellent adsorption capacity for methylene blue as a model aqueous organic pollutant. The results suggest the great potential of the MXene-g-PEs as an aqueous pollutant scavenger for various environmental applications including the combined ex situ/in situ remediation, and other relevant subsurface applications.
RESUMEN
Phase change materials (PCMs) have received considerable attention for various latent heat storage systems for efficient thermal energy utilization. Herein, a facile and fast method for the bulk nanoencapsulation of organic PCMs is proposed, based on the thermodynamically spontaneous spreading phenomenon of three immiscible liquid phases. In this approach, a complete engulfing of PCM nanodroplets (core phase) by immiscible prepolymer droplets (coating phase), both of which are bulk-dispersed in another immiscible medium (continuous phase), is thermodynamically driven by the relation between the surface energies of the core, coating, and continuous phases. To demonstrate the proposed method, melted n-docosane (PCM, core phase) nanodroplets are completely engulfed within a couple of minutes by immiscible polyethylene glycol diacrylate (PEGDA, coating phase) in an aqueous poly(vinyl alcohol) solution (continuous phase), and the PEGDA layer quickly cross-linked upon UV irradiation to form a rigid shell protecting the PCM core. As-produced PCM nanocapsules display promising heat storage and release performances as well as high durability in repeated heating-cooling cycles in both dry and wet states. The proposed process may serve as a useful platform for bulk production of PCM nanocapsules with various core and shell compositions in a facile, fast, and scalable way.