Efficient Delivery of Biological Cargos into Primary Cells by Electrodeposited Nanoneedles via Cell-Cycle-Dependent Endocytosis.

Nanoneedles are a useful tool for delivering exogenous biomolecules to cells. Although therapeutic applications have been explored, the mechanism regarding how cells interact with nanoneedles remains poorly studied. Here, we present a new approach for the generation of nanoneedles, validated their usefulness in cargo delivery, and studied the underlying genetic modulators during delivery. We fabricated arrays of nanoneedles based on electrodeposition and quantified its efficacy of delivery using fluorescently labeled proteins and siRNAs. Notably, we revealed that our nanoneedles caused the disruption of cell membranes, enhanced the expression of cell-cell junction proteins, and downregulated the expression of transcriptional factors of NFκB pathways. This perturbation trapped most of the cells in G2 phase, in which the cells have the highest endocytosis activities. Taken together, this system provides a new model for the study of interactions between cells and high-aspect-ratio materials.

PillarX: A Microfluidic Device to Profile Circulating Tumor Cell Clusters Based on Geometry, Deformability, and Epithelial State.

Circulating tumor cell (CTC) clusters are associated with increased metastatic potential and worse patient prognosis, but are rare, difficult to count, and poorly characterized biophysically. The PillarX device described here is a bimodular microfluidic device (Pillar-device and an X-magnetic device) to profile single CTCs and clusters from whole blood based on their size, deformability, and epithelial marker expression. Larger, less deformable clusters and large single cells are captured in the Pillar-device and sorted according to pillar gap sizes. Smaller, deformable clusters and single cells are subsequently captured in the X-device and separated based on epithelial marker expression using functionalized magnetic nanoparticles. Clusters of established and primary breast cancer cells with variable degrees of cohesion driven by different cell-cell adhesion protein expression are profiled in the device. Cohesive clusters exhibit a lower deformability as they travel through the pillar array, relative to less cohesive clusters, and have greater collective invasive behavior. The ability of the PillarX device to capture clusters is validated in mouse models and patients of metastatic breast cancer. Thus, this device effectively enumerates and profiles CTC clusters based on their unique geometrical, physical, and biochemical properties, and could form the basis of a novel prognostic clinical tool.

Magnetic Ranking Cytometry: Profiling Rare Cells at the Single-Cell Level.

Cellular heterogeneity in biological systems presents major challenges in the diagnosis and treatment of disease and also complicates the deconvolution of complex cellular phenomena. Single-cell analysis methods provide information that is not masked by the intrinsic heterogeneity of the bulk population and can therefore be applied to gain insights into heterogeneity among different cell subpopulations with fine resolution. Over the last 5 years, an explosion in the number of single-cell measurement methods has occurred. However, most of these methods are applicable to pure populations of cultured cells and are not able to handle high levels of phenotypic heterogeneity or a large background of nontarget cells. Microfluidics is an attractive tool for single cell manipulation as it enables individual encasing of single cells, allowing for high-throughput analysis with precise control of the local environment. Our laboratory has developed a new microfluidics-based analytical strategy to meet this unmet need referred to as magnetic ranking cytometry (MagRC). Cells expressing a biomarker of interest are labeled with receptor-coated magnetic nanoparticles and isolated from nontarget cells using a microfluidic device. The device ranks the cells according to the level of bound magnetic nanoparticles, which corresponds to the expression level of a target biomarker. Over the last several years, two generations of MagRC devices have been developed for different applications. The first-generation MagRC devices are powerful tools for the quantitation and analysis of rare cells present in heterogeneous samples, such as circulating tumor cells, stem cells, and pathogenic bacteria. The second-generation MagRC devices are compatible with the efficient recovery of cells sorted on the basis of protein expression and can be used to analyze large populations of cells and perform phenotypic CRISPR screens. To improve analytical precision, newer iterations of the first-generation and second-generation MagRC devices have been integrated with electrochemical sensors and Hall effect sensors, respectively. Both generations of MagRC devices permit the isolation of viable cells, which sets the stage for a wide range of applications, such as generating cell lines from rare cells and in vitro screening for effective therapeutic interventions in cancer patients to realize the promise of personalized medicine. This Account summarizes the development and application of the MagRC and describes a suite of advances that have enabled single-cell tumor cell analysis and monitoring tumor response to therapy, stem cell analysis, and detection of pathogens.

Nanoparticle-Mediated Capture and Electrochemical Detection of Methicillin-Resistant Staphylococcus aureus.

The spread of antibiotic-resistant bacteria poses a global threat to public health. Conventional bacterial detection and identification methods often require pre-enrichment and/or sample preprocessing and purification steps that can prolong diagnosis by days. Methicillin-resistant Staphylococcus aureus (MRSA) is one of the most widespread antibiotic-resistant bacteria and is the leading cause of hospital-acquired infections. Here, we have developed a method to specifically capture and detect MRSA directly from patient nasal swabs with no prior culture and minimal processing steps using a microfluidic device and antibody-functionalized magnetic nanoparticles. Bacteria are captured based on antibody recognition of a membrane-bound protein marker that confers ß-lactam antibiotic resistance. MRSA identification is then achieved by the use of a strain-specific antibody functionalized with alkaline phosphatase for electrochemical detection. This approach ensures that only those bacteria of the target strain and resistance profile are measured. The method has a limit of detection of 845 CFU/mL and excellent discrimination against high concentrations of common nontarget nasal flora with a turnaround time of under 4.5 h. This detection method was successfully validated using clinical nasal swab specimens ( n = 30) and has the potential to be tailored to various bacterial targets.

Phenotypic Profiling of Circulating Tumor Cells in Metastatic Prostate Cancer Patients Using Nanoparticle-Mediated Ranking.

The analysis of circulating tumor cells (CTCs) provides a means to collect information about the evolving properties of a tumor during cancer progression and treatment. For patients with metastatic prostate cancer, noninvasive serial measurements of bloodborne cells may provide a means to tailor therapeutic decisions based on an individual patient's response. Here, we used a high-sensitivity profiling approach to monitor CTCs in patients with metastatic castrate-resistant prostate cancer (mCRPC) undergoing treatment with abiraterone and enzalutamide, two drugs used to treat advanced prostate cancer. The capture and profiling approach uses antibody-functionalized magnetic nanoparticles to sort cells according to protein expression levels. CTCs are tagged with magnetic nanoparticles conjugated to an antibody specific for the epithelial cell adhesion molecule (EpCAM) and sorted into four zones of a microfluidic device based on EpCAM expression levels. Our approach was compared to the FDA-cleared CellSearch method, and we demonstrate significantly higher capture efficiency of low-EpCAM cells compared to the commercial method. The nanoparticle-based approach detected CTCs from 86% of patients at baseline, compared to CellSearch which only detected CTCs from 60% of patients. Patients were stratified as prostate specific antigen (PSA) progressive versus responsive based on clinically acceptable definitions, and it was observed that patients with a limited response to therapy had elevated levels of androgen receptor variant 7 (ARV7) and the mesenchymal marker, N-cadherin, expressed on their CTCs. In addition, these CTCs exhibited lower EpCAM expression. The results highlight features of CTCs associated with disease progression on abiraterone or enzalutamide, including mesenchymal phenotypes and increased expression levels of ARV7. The use of a high-sensitivity method to capture and profile CTCs provides more informative data concerning the phenotypic properties of these cells as patients undergo treatment relative to an FDA-cleared method.

Three-Dimensional Nanostructured Architectures Enable Efficient Neural Differentiation of Mesenchymal Stem Cells via Mechanotransduction.

Cell morphology and geometry affect cellular processes such as stem cell differentiation, suggesting that these parameters serve as fundamental regulators of biological processes within the cell. Hierarchical architectures featuring micro- and nanotopographical features therefore offer programmable systems for stem cell differentiation. However, a limited number of studies have explored the effects of hierarchical architectures due to the complexity of fabricating systems with rationally tunable micro- and nanostructuring. Here, we report three-dimensional (3D) nanostructured microarchitectures that efficiently regulate the fate of human mesenchymal stem cells (hMSCs). These nanostructured architectures strongly promote cell alignment and efficient neurogenic differentiation where over 85% of hMSCs express microtubule-associated protein 2 (MAP2), a mature neural marker, after 7 days of culture on the nanostructured surface. Remarkably, we found that the surface morphology of nanostructured surface is a key factor that promotes neurogenesis and that highly spiky structures promote more efficient neuronal differentiation. Immunostaining and gene expression profiling revealed significant upregulation of neuronal markers compared to unpatterned surfaces. These findings suggest that the 3D nanostructured microarchitectures can play a critical role in defining stem cell behavior.

Potential-Responsive Surfaces for Manipulation of Cell Adhesion, Release, and Differentiation.

In living systems, interfacial molecular interactions control many biological processes. New stimuli-responsive strategies are desired to provide versatile model systems that can regulate cell behavior in vitro. Described here are potential-responsive surfaces that control cell adhesion and release as well as stem cell differentiation. Cell adhesion can be modulated dynamically by applying negative and positive potentials to surfaces functionalized with tailored monolayers. This process alters cell morphology and ultimately controls behavior and the fate of the cells. Cells can be detached from the electrode surface as intact clusters with different geometries using electrochemical potentials. Importantly, morphological changes during adhesion guide stem cell differentiation. The higher accessibility of the peptide under a positive applied potential causes phenotypic changes in the cells that are hallmarks of osteogenesis, whereas lower accessibility of the peptide promoted by negative potentials leads to adipogenesis.

A Hierarchical 3D Nanostructured Microfluidic Device for Sensitive Detection of Pathogenic Bacteria.

Efficient capture and rapid detection of pathogenic bacteria from body fluids lead to early diagnostics of bacterial infections and significantly enhance the survival rate. We propose a universal nano/microfluidic device integrated with a 3D nanostructured detection platform for sensitive and quantifiable detection of pathogenic bacteria. Surface characterization of the nanostructured detection platform confirms a uniform distribution of hierarchical 3D nano-/microisland (NMI) structures with spatial orientation and nanorough protrusions. The hierarchical 3D NMI is the unique characteristic of the integrated device, which enables enhanced capture and quantifiable detection of bacteria via both a probe-free and immunoaffinity detection method. As a proof of principle, we demonstrate probe-free capture of pathogenic Escherichia coli (E. coli) and immunocapture of methicillin-resistant-Staphylococcus aureus (MRSA). Our device demonstrates a linear range between 50 and 104 CFU mL-1 , with average efficiency of 93% and 85% for probe-free detection of E. coli and immunoaffinity detection of MRSA, respectively. It is successfully demonstrated that the spatial orientation of 3D NMIs contributes in quantifiable detection of fluorescently labeled bacteria, while the nanorough protrusions contribute in probe-free capture of bacteria. The ease of fabrication, integration, and implementation can inspire future point-of-care devices based on nanomaterial interfaces for sensitive and high-throughput optical detection.

Electrochemical Methods for the Analysis of Clinically Relevant Biomolecules.

Rapid progress in identifying biomarkers that are hallmarks of disease has increased demand for high-performance detection technologies. Implementation of electrochemical methods in clinical analysis may provide an effective answer to the growing need for rapid, specific, inexpensive, and fully automated means of biomarker analysis. This Review summarizes advances from the past 5 years in the development of electrochemical sensors for clinically relevant biomolecules, including small molecules, nucleic acids, and proteins. Various sensing strategies are assessed according to their potential for reaching relevant limits of sensitivity, specificity, and degrees of multiplexing. Furthermore, we address the remaining challenges and opportunities to integrate electrochemical sensing platforms into point-of-care solutions.