Ancient DNA and deep population structure in sub-Saharan African foragers.

Multiple lines of genetic and archaeological evidence suggest that there were major demographic changes in the terminal Late Pleistocene epoch and early Holocene epoch of sub-Saharan Africa1-4. Inferences about this period are challenging to make because demographic shifts in the past 5,000 years have obscured the structures of more ancient populations3,5. Here we present genome-wide ancient DNA data for six individuals from eastern and south-central Africa spanning the past approximately 18,000 years (doubling the time depth of sub-Saharan African ancient DNA), increase the data quality for 15 previously published ancient individuals and analyse these alongside data from 13 other published ancient individuals. The ancestry of the individuals in our study area can be modelled as a geographically structured mixture of three highly divergent source populations, probably reflecting Pleistocene interactions around 80-20 thousand years ago, including deeply diverged eastern and southern African lineages, plus a previously unappreciated ubiquitous distribution of ancestry that occurs in highest proportion today in central African rainforest hunter-gatherers. Once established, this structure remained highly stable, with limited long-range gene flow. These results provide a new line of genetic evidence in support of hypotheses that have emerged from archaeological analyses but remain contested, suggesting increasing regionalization at the end of the Pleistocene epoch.

Ontogenetic changes in bite force and gape in tufted capuchins.

Bite force and gape are two important performance metrics of the feeding system, and these metrics are inversely related for a given muscle size because of fundamental constraints in sarcomere length-tension relationships. How these competing performance metrics change in developing primates is largely unknown. Here, we quantified in vivo bite forces and gapes across ontogeny and examined these data in relation to body mass and cranial measurements in captive tufted capuchins, Sapajus spp. Bite force and gape were also compared across geometric and mechanical properties of mechanically challenging foods to investigate relationships between bite force, gape and food accessibility (defined here as the ability to breach shelled nuts). Bite forces at a range of gapes and feeding behavioral data were collected from a cross-sectional ontogenetic series of 20 captive and semi-wild tufted capuchins at the Núcleo de Procriação de Macacos-Prego Research Center in Araçatuba, Brazil. These data were paired with body mass, photogrammetric measures of jaw length and facial width, and food geometric and material properties. Tufted capuchins with larger body masses had absolutely higher in vivo bite forces and gapes, and animals with wider faces had absolutely higher bite forces. Bite forces and gapes were significantly smaller in juveniles compared with subadults and adults. These are the first primate data to empirically demonstrate the gapes at which maximum active bite force is generated and to demonstrate relationships to food accessibility. These data advance our understanding of how primates meet the changing performance demands of the feeding system during development.

Human burials at the Kisese II rockshelter, Tanzania.

OBJECTIVES: The Late Pleistocene and early Holocene in eastern Africa are associated with complex evolutionary and demographic processes that contributed to the population variability observed in the region today. However, there are relatively few human skeletal remains from this time period. Here we describe six individuals from the Kisese II rockshelter in Tanzania that were excavated in 1956, present a radiocarbon date for one of the individuals, and compare craniodental morphological diversity among eastern African populations. MATERIALS AND METHODS: This study used standard biometric analyses to assess the age, sex, and stature of the Kisese II individuals. Eastern African craniodental morphological variation was assessed using measures of dental size and a subset of Howells' cranial measurements for the Kisese II individuals as well as early Holocene, early pastoralist, Pastoral Neolithic, and modern African individuals. RESULTS: Our results suggest a minimum of six individuals from the Kisese II collections with two adults and four juveniles. While the dating for most of the burials is uncertain, one individual is directly radiocarbon dated to ~7.1 ka indicating that at least one burial is early Holocene in age. Craniodental metric comparisons indicate that the Kisese II individuals extend the amount of human morphological diversity among Holocene eastern Africans. CONCLUSIONS: Our findings contribute to a growing body of evidence that Late Pleistocene and early Holocene eastern Africans exhibited relatively high amounts of morphological diversity. However, the Kisese II individuals suggest morphological similarity at localized sites potentially supporting increased regionalization during the early Holocene.

Validation of a method for quantifying urinary C-peptide in platyrrhine monkeys.

Urinary C-peptide (UCP) is a biomarker for insulin that can be used as a non-invasive physiological measure of energy balance. Previous research has validated the use of UCP to quantify energy balance in catarrhines; however, there have been no such studies in platyrrhines. Validation is necessary in this lineage of primates as divergent evolution has resulted in varied organization of insulin genes. Here, we evaluate a method for quantifying UCP in platyrrhines to measure energetic expenditure, a key component of calculating energy balance. Urine samples were opportunistically collected from laboratory-housed tufted capuchins (Sapajus apella) during exercise activities. To examine the efficacy of using UCP as a means for assessing energetic condition, we analyzed urine samples collected before and after exercise. Urinary C-peptide concentrations were measured using a commercial C-peptide radioimmunoassay. We found that on average, UCP concentrations were 0.34 ng/mL lower after exercise than they were prior to exercise (range =0.04 to 0.71 ng/mL). The rateofenergy expenditureper unit time was greater when capuchins were exercising at faster speeds. Concordantly, UCP concentrations decreased more following exercise at those faster speeds. Parallelism of serial dilutions of samples was calculated to assess the precision of UCP concentrations produced using these methods. Measured UCP concentrations decreased at expected intervals in accordance with each dilution factor. Our results provide biological validation of the use of a commercial assay for quantifying UCP as a measure of energy expenditure in this platyrrhine species.

Grit your teeth and chew your food: Implications of food material properties and abrasives for rates of dental microwear formation in laboratory Sapajus apella (Primates).

Dental microwear analysis has been employed in studies of a wide range of modern and fossil animals, yielding insights into the biology/ecology of those taxa. Some researchers have suggested that dental microwear patterns ultimately relate back to the material properties of the foods being consumed, whereas others have suggested that, because exogenous grit is harder than organic materials in food, grit should have an overwhelming impact on dental microwear patterns. To shed light on this issue, laboratory-based feeding experiments were conducted on tufted capuchin monkeys [Sapajus apella] with dental impressions taken before and after consumption of different artificial foods. The foods were (1) brittle custom-made biscuits laced with either of two differently-sized aluminum silicate abrasives, and (2) ductile custom-made "gummies" laced with either of the two same abrasives. In both cases, animals were allowed to feed on the foods for 36 hours before follow-up dental impressions were taken. Resultant casts were analyzed using a scanning electron microscope. We asked five questions: (1) would the animals consume different amounts of each food item, (2) what types of dental microwear would be formed, (3) would rates of dental microwear differ between the consumption of biscuits (i.e., brittle) versus gummies (i.e., ductile), (4) would rates of dental microwear differ between foods including larger- versus smaller-grained abrasives, and (5) would rates of dental microwear differ between molar shearing and crushing facets in the animals in these experiments? Results indicated that (1) fewer biscuits were consumed when laced with larger-grained abrasives (as opposed to smaller-grained abrasives), but no such difference was observed in the consumption of gummies, (2) in all cases, a variety of dental microwear features was formed, (3) rates of dental microwear were higher when biscuits versus gummies were consumed, (4) biscuits laced with larger-grained abrasives caused a higher percentage of new features per item consumed, and (5) the only difference between facets occurred with the processing of biscuits, where crushing facets showed a faster rate of wear than shearing facets. These findings suggest that the impact of exogenous grit on dental microwear is the result of a dynamic, complex interaction between (at the very least) grit size, food material properties, and time spent feeding - which is further evidence of the multifactorial nature of dental microwear formation.

Jaw kinematics and mandibular morphology in humans.

Understanding the influence of feeding behavior on mandibular morphology is necessary for interpreting dietary change in fossil hominins. However, mandibular morphology is also likely to have an effect on feeding behavior, including jaw kinematics. Here we examine the relationships between mandibular morphology and jaw kinematics in humans using landmark-based morphometrics to quantify jaw movement. Three-dimensional movements of reflective markers coupled to the mandible and cranium were used to capture jaw movements while subjects chewed cubes of raw and cooked sweet potato. Geometric morphometric methods were adapted to quantify and analyze gape cycle motion paths. Gape cycles varied significantly across chewing sequences and between raw and cooked sweet potato. Variation in gape cycle size and shape is related to the width (intergonial distance) and length of the mandible. These results underline the fact that jaw kinematic variation within and between taxa is related to and may be influenced by mandibular morphology. Future studies examining kinematic variation should assess the influence of morphological differences on movement.

Homo naledi cranial remains from the Lesedi chamber of the rising star cave system, South Africa.

Excavations in the Lesedi Chamber (U.W. 102) of the Rising Star cave system from 2013 to 2015 resulted in the recovery of 131 fossils representing at least three individuals attributed to Homo naledi. Hominin fossils were recovered from three collection areas within the Lesedi Chamber. A partial skull with near complete dentition (LES1) and an associated partial skeleton were recovered from Area 102a, while craniodental remains from two other individuals were recovered from Areas 102b and 102c. Here we present detailed anatomical descriptions and metrical comparisons of the Lesedi Chamber H. naledi craniodental remains that preserve diagnostic morphology. The LES1 skull is a presumed male that is slightly larger in size, and shows greater development of ectocranial structures compared to other H. naledi specimens from the Dinaledi Chamber of the Rising Star cave system. Otherwise the Lesedi fossils are notably similar to the Dinaledi fossils in shape and morphology. The Lesedi fossils also preserve the delicate nasal and lacrimal bones that are otherwise unrecorded in the Dinaledi sample. Limited morphological differences between the Dinaledi and Lesedi Chamber hominin samples provides support for the hypothesis that these two assemblages share a close phyletic relationship.

Joint angular excursions during cyclical behaviors differ between tetrapod feeding and locomotor systems.

Tetrapod musculoskeletal diversity is usually studied separately in feeding and locomotor systems. However, comparisons between these systems promise important insight into how natural selection deploys the same basic musculoskeletal toolkit - connective tissues, bones, nerves and skeletal muscle - to meet the differing performance criteria of feeding and locomotion. In this study, we compare average joint angular excursions during cyclic behaviors - chewing, walking and running - in a phylogenetic context to explore differences in the optimality criteria of these two systems. Across 111 tetrapod species, average limb-joint angular excursions during cyclic locomotion are greater and more evolutionarily labile than those of the jaw joint during cyclic chewing. We argue that these findings reflect fundamental functional dichotomies between tetrapod locomotor and feeding systems. Tetrapod chewing systems are optimized for precise application of force over a narrower, more controlled and predictable range of displacements, the principal aim being to fracture the substrate, the size and mechanical properties of which are controlled at ingestion and further reduced and homogenized, respectively, by the chewing process. In contrast, tetrapod limbed locomotor systems are optimized for fast and energetically efficient application of force over a wider and less predictable range of displacements, the principal aim being to move the organism at varying speeds relative to a substrate whose geometry and mechanical properties need not become more homogeneous as locomotion proceeds. Hence, the evolution of tetrapod locomotor systems has been accompanied by an increasing diversity of limb-joint excursions, as tetrapods have expanded across a range of locomotor substrates and environments.

Taking a big bite: Working together to better understand the evolution of feeding in primates.

The study of adaptation requires the integration of an array of different types of data. A single individual can find such integration daunting, if not impossible. In an effort to clarify the role of diet in the evolution of the primate craniofacial and dental apparatus, we assembled a team of researchers that have various types and degrees of expertise. This interaction has provided a range of insights for all contributors, and this has helped to refine questions, clarify the possibilities and limitations that laboratory and field settings offer, and further explore the ways in which laboratory and field data can be suitably integrated. A complete and accurate picture of dietary adaptation cannot be gained in isolation. Collaboration provides the bridge to a more holistic view of primate biology and evolution.

Inter-stride variability triggers gait transitions in mammals and birds.

Speed-related gait transitions occur in many animals, but it remains unclear what factors trigger gait changes. While the most widely accepted function of gait transitions is that they reduce locomotor costs, there is no obvious metabolic trigger signalling animals when to switch gaits. An alternative approach suggests that gait transitions serve to reduce locomotor instability. While there is evidence supporting this in humans, similar research has not been conducted in other species. This study explores energetics and stride variability during the walk-run transition in mammals and birds. Across nine species, energy savings do not predict the occurrence of a gait transition. Instead, our findings suggest that animals trigger gait transitions to maintain high locomotor rhythmicity and reduce unstable states. Metabolic efficiency is an important benefit of gait transitions, but the reduction in dynamic instability may be the proximate trigger determining when those transitions occur.

A new fossil cercopithecid tibia from Laetoli and its implications for positional behavior and paleoecology.

Detailed analyses and comparisons of postcranial specimens of Plio-Pleistocene cercopithecids provide an opportunity to examine the recent evolutionary history and locomotor diversity in Old World monkeys. Studies examining the positional behavior and substrate preferences of fossil cercopithecids are also important for reconstructing the paleoenvironments of Plio-Pleistocene hominin sites. Here we describe a new fossil cercopithecid tibia (EP 1100/12) from the Australopithecus afarensis-bearing Upper Laetolil Beds (∼3.7 Ma) of Laetoli in northern Tanzania. The fossil tibia is attributed to cf. Rhinocolobus sp., which is the most common colobine at Laetoli. In addition to qualitative comparisons, the tibial shape of EP 1100/12 was compared to that of 190 extant cercopithecids using three-dimensional landmarks. Discriminant function analyses of the shape data were used to assess taxonomic affinity and shape variation relating to positional behavior. EP 1100/12 clustered with extant colobines, particularly the large-bodied genera Nasalis and Rhinopithecus. Comparisons reveal that EP 1100/12 belongs to a large-bodied monkey that engaged in arboreal pronograde quadrupedalism. These findings add further support to previous inferences that woodland and forest environments dominated the paleoenvironment of the Upper Laetolil Beds, which supported the diverse community of cercopithecids at Laetoli. The inferred paleoecology and the presence of large-bodied arboreally-adapted monkeys at Laetoli show that A. afarensis had access to a range of diverse habitats, including woodlands and forests. This supports the possibility that A. afarensis, with its potential range of positional capabilities, was able to utilize arboreal settings for food acquisition and refuge from predators.

Skull diversity in the Homo lineage and the relative position of Homo naledi.

The discovery of Homo naledi has expanded the range of phenotypic variation in Homo, leading to new questions surrounding the mosaic nature of morphological evolution. Though currently undated, its unique morphological pattern and possible phylogenetic relationships to other hominin taxa suggest a complex evolutionary scenario. Here, we perform geometric morphometric analyses on H. naledi cranial and mandibular remains to investigate its morphological relationship with species of Homo and Australopithecus. We use Generalized Procrustes analysis to place H. naledi within the pattern of known hominin skull diversity, distributions of Procrustes distances among individuals to compare H. naledi and Homo erectus, and neighbor joining trees to investigate the potential phenetic relationships between groups. Our goal is to address a set of hypotheses relating to the uniqueness of H. naledi, its affinity with H. erectus, and the age of the fossils based on skull morphology. Our results indicate that, cranially, H. naledi aligns with members of the genus Homo, with closest affiliations to H. erectus. The mandibular results are less clear; H. naledi closely associates with a number of taxa, including some australopiths. However, results also show that although H. naledi shares similarities with H. erectus, some distances from this taxon - especially small-brained members of this taxon - are extreme. The neighbor joining trees place H. naledi firmly within Homo. The trees based on cranial morphology again indicate a close relationship between H. naledi and H. erectus, whereas the mandibular tree places H. naledi closer to basal Homo, suggesting a deeper antiquity. Altogether, these results emphasize the unique combination of features (H. erectus-like cranium, less derived mandible) defining H. naledi. Our results also highlight the variability within Homo, calling for a greater focus on the cause of this variability, and emphasizing the importance of using the total morphological package for species diagnoses.

The skull of Homo naledi.

The species Homo naledi was recently named from specimens recovered from the Dinaledi Chamber of the Rising Star cave system in South Africa. This large skeletal sample lacks associated faunal material and currently does not have a known chronological context. In this paper, we present comprehensive descriptions and metric comparisons of the recovered cranial and mandibular material. We describe 41 elements attributed to Dinaledi Hominin (DH1-DH5) individuals and paratype U.W. 101-377, and 32 additional cranial fragments. The H. naledi material was compared to Plio-Pleistocene fossil hominins using qualitative and quantitative analyses including over 100 linear measurements and ratios. We find that the Dinaledi cranial sample represents an anatomically homogeneous population that expands the range of morphological variation attributable to the genus Homo. Despite a relatively small cranial capacity that is within the range of australopiths and a few specimens of early Homo, H. naledi shares cranial characters with species across the genus Homo, including Homo habilis, Homo rudolfensis, Homo erectus, and Middle Pleistocene Homo. These include aspects of cranial form, facial morphology, and mandibular anatomy. However, the skull of H. naledi is readily distinguishable from existing species of Homo in both qualitative and quantitative assessments. Since H. naledi is currently undated, we discuss the evolutionary implications of its cranial morphology in a range of chronological frameworks. Finally, we designate a sixth Dinaledi Hominin (DH6) individual based on a juvenile mandible.

Variation in human gape cycle kinematics and occlusal topography.

OBJECTIVES: This study tested hypotheses relating intraspecific variation in occlusal morphology and intraspecific variation in jaw movements during feeding. Gape cycle kinematic variation was hypothesized to correlate with gape cycle number within a chewing sequence as well as with food toughness and stiffness. Gape cycle kinematic variation was also hypothesized to correlate with variation in occlusal area, slope, and volume. METHODS AND MATERIALS: Twenty-six adult human subjects chewed four foods with varying material properties while their jaw movements were recorded using three-dimensional coordinates of facial markers captured with a Vicon camera system. Post-canine occlusal morphology of each subject was quantified in ArcGIS using dental topographic analysis of dental casts. RESULTS: Gape cycle duration did not vary with gape cycle number, food toughness, or food stiffness. Gape cycle vertical and lateral displacement correlated negatively with gape cycle number, while foods with higher toughness and Young's modulus had greater jaw vertical and lateral displacement. Subjects with steeper occlusal slopes had longer gape cycle durations and greater amounts of vertical displacement during the slow closing phase of the gape cycle. DISCUSSION: The results suggest that gape cycle durations are relatively consistent despite changes in food properties and gape cycle number, while occlusal slope affects gape cycle duration and vertical displacement during inferred occlusal contact. However, gape cycle number and bolus properties explain greater amounts of kinematic variation than does occlusal morphology.

Chewing efficiency and occlusal functional morphology in modern humans.

The reduction of occlusal dimensions in early Homo is often proposed to be a functional adaptation to diet. With their smaller occlusal surfaces, species of early Homo are suggested to have reduced food-processing abilities, particularly for foods with high material properties (e.g., increased toughness). Here, we employ chewing efficiency as a measure of masticatory performance to test the relationships between masticatory function and food properties. We predicted that humans are more efficient when processing foods of lower toughness and Young's modulus values, and that subjects with larger occlusal surfaces will be less efficient when processing foods with higher toughness and Young's modulus, as the greater area spreads out the overall bite force applied to food particles. Chewing efficiency was measured in 26 adults using high-speed motion capture and surface electromyography. The dentition of each subject was cast and the occlusal surface was quantified using dental topographic analysis. Toughness and displacement-limited index were negatively correlated with chewing efficiency, but Young's modulus was not. Increased occlusal two-dimensional area and surface area were positively correlated with chewing efficiency for all foods. Thus, larger occlusal surface areas were more efficient when processing foods of greater toughness. These results suggest that the reduction in occlusal area in early Homo was associated with a reduction in chewing efficiency, particularly for foods with greater toughness. Further, the larger occlusal surfaces of earlier hominins such as Australopithecus would have likely increased chewing efficiency and increased the probability of fracture when processing tough foods.

The evolutionary relationships and age of Homo naledi: An assessment using dated Bayesian phylogenetic methods.

Homo naledi is a recently discovered species of fossil hominin from South Africa. A considerable amount is already known about H. naledi but some important questions remain unanswered. Here we report a study that addressed two of them: "Where does H. naledi fit in the hominin evolutionary tree?" and "How old is it?" We used a large supermatrix of craniodental characters for both early and late hominin species and Bayesian phylogenetic techniques to carry out three analyses. First, we performed a dated Bayesian analysis to generate estimates of the evolutionary relationships of fossil hominins including H. naledi. Then we employed Bayes factor tests to compare the strength of support for hypotheses about the relationships of H. naledi suggested by the best-estimate trees. Lastly, we carried out a resampling analysis to assess the accuracy of the age estimate for H. naledi yielded by the dated Bayesian analysis. The analyses strongly supported the hypothesis that H. naledi forms a clade with the other Homo species and Australopithecus sediba. The analyses were more ambiguous regarding the position of H. naledi within the (Homo, Au. sediba) clade. A number of hypotheses were rejected, but several others were not. Based on the available craniodental data, Homo antecessor, Asian Homo erectus, Homo habilis, Homo floresiensis, Homo sapiens, and Au. sediba could all be the sister taxon of H. naledi. According to the dated Bayesian analysis, the most likely age for H. naledi is 912 ka. This age estimate was supported by the resampling analysis. Our findings have a number of implications. Most notably, they support the assignment of the new specimens to Homo, cast doubt on the claim that H. naledi is simply a variant of H. erectus, and suggest H. naledi is younger than has been previously proposed.

Spatial determinants of the mandibular curve of Spee in modern and archaic Homo.

OBJECTIVES: The curve of Spee (COS) is a mesio-distally curved alignment of the canine through distal molar cusp tips in certain mammals including modern humans and some fossil hominins. In humans, the alignment varies from concave to flat, and previous studies have suggested that this difference reflects craniofacial morphology, including the degree of alveolar prognathism. However, the relationship between prognathism and concavity of the COS has not been tested in craniofacially variant populations. We tested the hypothesis that greater alveolar prognathism covaries with a flatter COS in African-American and European-American populations. We further examined this relationship in fossil Homo including Homo neanderthalensis and early anatomically modern Homo sapiens, which are expected to extend the amount of variation in the COS from the extant sample. METHODS AND MATERIALS: These hypotheses were tested using three-dimensional geometric morphometrics. Landmarks were recorded from the skulls of 166 African-Americans, 123 European-Americans, and 10 fossil hominin mandible casts. Landmarks were subjected to generalized Procrustes analysis, principal components analysis, and two-block partial least squares analysis. RESULTS: We documented covariation between the COS and alveolar prognathism such that relatively prognathic individuals have a flatter COS. Mandibular data from the fossil hominin taxa generally confirm and extend this correlation across a greater range of facial size and morphology in Homo. DISCUSSION: Our results suggest that the magnitude of the COS is related to a suite of features associated with alveolar prognathism in modern humans and across anthropoids. We also discuss the implications for spatial interactions between the dental arches.

Tradeoffs between bite force and gape in Eulemur and Varecia.

In 1974, Sue Herring described the relationship between two important performance variables in the feeding system, bite force and gape. These variables are inversely related, such that, without specific muscular adaptations, most animals cannot produce high bite forces at large gapes for a given sized muscle. Despite the importance of these variables for feeding biomechanics and functional ecology, the paucity of in vivo bite force data in primates has led to bite forces largely being estimated through ex vivo methods. Here, we quantify and compare in vivo bite forces and gapes with output from simulated musculoskeletal models in two craniofacially distinct strepsirrhines: Eulemur, which has a shorter jaw and slower chewing cycle durations relative to jaw length and body mass compared to Varecia. Bite forces were collected across a range of linear gapes from 16 adult lemurs (suborder Strepsirrhini) at the Duke Lemur Center in Durham, North Carolina representing three species: Eulemur flavifrons (n = 6; 3F, 3M), Varecia variegata (n = 5; 3F, 2M), and Varecia rubra (n = 5; 5F). Maximum linear and angular gapes were significantly higher for Varecia compared to Eulemur (p = .01) but there were no significant differences in recorded maximum in vivo bite forces (p = .88). Simulated muscle models using architectural data for these taxa suggest this approach is an accurate method of estimating bite force-gape tradeoffs in addition to variables such as fiber length, fiber operating range, and gapes associated with maximum force. Our in vivo and modeling data suggest Varecia has reduced bite force capacities in favor of absolutely wider gapes compared to Eulemur in relation to their longer jaws. Importantly, our comparisons validate the simulated muscle approach for estimating bite force as a function of gape in extant and fossil primates.

Ontogenetic biomechanics of tufted (Sapajus) and untufted (Cebus) capuchin mandibles.

OBJECTIVES: Cortical bone geometry is commonly used to investigate biomechanical properties of primate mandibles. However, the ontogeny of these properties is less understood. Here we investigate changes in cortical bone cross-sectional properties throughout capuchin ontogeny and compare captive versus wild, semi-provisioned groups. Tufted capuchins (Sapajus spp.) are known to consume relatively hard/tough foods, while untufted capuchins (Cebus spp.) exploit less mechanically challenging foods. Previous research indicates dietary differences are present early in development and adult Sapajus mandibles can resist higher bending/shear/torsional loads. MATERIALS AND METHODS: This study utilized microCT scans of 22 Cebus and 45 Sapajus from early infancy to adulthood from three sample populations: one captive Cebus, one captive Sapajus, and one semi-provisioned, free-ranging Sapajus. Mandibular cross-sectional properties were calculated at the symphysis, P3, and M1. If the tooth had not erupted, its position within the crypt was used. A series of one-way ANOVAs were performed to assess differences between and within the sample populations. RESULTS: Mandible robusticity increases across ontogeny for all three sample populations. Sapajus were better able to withstand bending and torsional loading even early in ontogeny, but no difference in shear resistance was found. Semi-provisioned, free-ranging Sapajus tend to show increased abilities to resist bending and torsional loading but not shear loading compared to captive Sapajus. DISCUSSION: This study helps advance our understanding of the primate masticatory system development and opens the door for further studies into adaptive plasticity in shaping the masticatory apparatus of capuchins and differences in captive versus free-ranging sample populations.

Ontogenetic changes in jaw leverage and skull shape in tufted and untufted capuchins.

The ontogeny of feeding is characterized by shifting functional demands concurrent with changes in craniofacial anatomy; relationships between these factors will look different in primates with disparate feeding behaviors during development. This study examines the ontogeny of skull morphology and jaw leverage in tufted (Sapajus) and untufted (Cebus) capuchin monkeys. Unlike Cebus, Sapajus have a mechanically challenging diet and behavioral observations of juvenile Sapajus suggest these foods are exploited early in development. Landmarks were placed on three-dimensional surface models of an ontogenetic series of Sapajus and Cebus skulls (n = 53) and used to generate shape data and jaw-leverage estimates across the tooth row for three jaw-closing muscles (temporalis, masseter, medial pterygoid) as well as a weighted combined estimate. Using geometric morphometric methods, we found that skull shape diverges early and shape is significantly different between Sapajus and Cebus throughout ontogeny. Additionally, jaw leverage varies with age and position on the tooth row and is greater in Sapajus compared to Cebus when calculated at the permanent dentition. We used two-block partial least squares analyses to identify covariance between skull shape and each of our jaw muscle leverage estimates. Sapajus, but not Cebus, has significant covariance between all leverage estimates at the anterior dentition. Our findings show that Sapajus and Cebus exhibit distinct craniofacial morphologies early in ontogeny and strong covariance between leverage estimates and craniofacial shape in Sapajus. These results are consistent with prior behavioral and comparative work suggesting these differences are a function of selection for exploiting mechanically challenging foods in Sapajus, and further emphasize that these differences appear quite early in ontogeny. This research builds on prior work that has highlighted the importance of understanding ontogeny for interpreting adult morphology.