Materials synthesis at terapascal static pressures.

Theoretical modelling predicts very unusual structures and properties of materials at extreme pressure and temperature conditions1,2. Hitherto, their synthesis and investigation above 200 gigapascals have been hindered both by the technical complexity of ultrahigh-pressure experiments and by the absence of relevant in situ methods of materials analysis. Here we report on a methodology developed to enable experiments at static compression in the terapascal regime with laser heating. We apply this method to realize pressures of about 600 and 900 gigapascals in a laser-heated double-stage diamond anvil cell3, producing a rhenium-nitrogen alloy and achieving the synthesis of rhenium nitride Re7N3-which, as our theoretical analysis shows, is only stable under extreme compression. Full chemical and structural characterization of the materials, realized using synchrotron single-crystal X-ray diffraction on microcrystals in situ, demonstrates the capabilities of the methodology to extend high-pressure crystallography to the terapascal regime.

Synthesis of LaCN3, TbCN3, CeCN5, and TbCN5 Polycarbonitrides at Megabar Pressures.

Inorganic ternary metal-C-N compounds with covalently bonded C-N anions encompass important classes of solids such as cyanides and carbodiimides, well known at ambient conditions and composed of [CN]- and [CN2]2- anions, as well as the high-pressure formed guanidinates featuring [CN3]5- anion. At still higher pressures, carbon is expected to be 4-fold coordinated by nitrogen atoms, but hitherto, such CN4-built anions are missing. In this study, four polycarbonitride compounds (LaCN3, TbCN3, CeCN5, and TbCN5) are synthesized in laser-heated diamond anvil cells at pressures between 90 and 111 GPa. Synchrotron single-crystal X-ray diffraction (SCXRD) reveals that their crystal structures are built of a previously unobserved anionic single-bonded carbon-nitrogen three-dimensional (3D) framework consisting of CN4 tetrahedra connected via di- or oligo-nitrogen linkers. A crystal-chemical analysis demonstrates that these polycarbonitride compounds have similarities to lanthanide silicon phosphides. Decompression experiments reveal the existence of LaCN3 and CeCN5 compounds over a very large pressure range. Density functional theory (DFT) supports these discoveries and provides further insight into the stability and physical properties of the synthesized compounds.

Simple Molecules under High-Pressure and High-Temperature Conditions: Synthesis and Characterization of α- and ß-C(NH)2 with Fully sp3 -Hybridized Carbon.

The elements hydrogen, carbon, and nitrogen are among the most abundant in the solar system. Still, little is known about the ternary compounds these elements can form under the high-pressure and high-temperature conditions found in the outer planets' interiors. These materials are also of significant research interest since they are predicted to feature many desirable properties such as high thermal conductivity and hardness due to strong covalent bonding networks. In this study, the high-pressure high-temperature reaction behavior of malononitrile H2 C(CN)2 , dicyandiamide (H2 N)2 C=NCN, and melamine (C3 N3 )(NH2 )3 was investigated in laser-heated diamond anvil cells. Two previously unknown compounds, namely α-C(NH)2 and ß-C(NH)2 , have been synthesized and found to have fully sp3 -hybridized carbon atoms. α-C(NH)2 crystallizes in a distorted ß-cristobalite structure, while ß-C(NH)2 is built from previously unknown imide-bridged 2,4,6,8,9,10-hexaazaadamantane units, which form two independent interpenetrating diamond-like networks. Their stability domains and compressibility were studied, for which supporting density functional theory calculations were performed.

Stabilization Of The CN3 5- Anion In Recoverable High-pressure Ln3 O2 (CN3 ) (Ln=La, Eu, Gd, Tb, Ho, Yb) Oxoguanidinates.

A series of isostructural Ln3 O2 (CN3 ) (Ln=La, Eu, Gd, Tb, Ho, Yb) oxoguanidinates was synthesized under high-pressure (25-54 GPa) high-temperature (2000-3000 K) conditions in laser-heated diamond anvil cells. The crystal structure of this novel class of compounds was determined via synchrotron single-crystal X-ray diffraction (SCXRD) as well as corroborated by X-ray absorption near edge structure (XANES) measurements and density functional theory (DFT) calculations. The Ln3 O2 (CN3 ) solids are composed of the hitherto unknown CN3 5- guanidinate anion-deprotonated guanidine. Changes in unit cell volumes and compressibility of Ln3 O2 (CN3 ) (Ln=La, Eu, Gd, Tb, Ho, Yb) compounds are found to be dictated by the lanthanide contraction phenomenon. Decompression experiments show that Ln3 O2 (CN3 ) compounds are recoverable to ambient conditions. The stabilization of the CN3 5- guanidinate anion at ambient conditions provides new opportunities in inorganic and organic synthetic chemistry.

Revealing Phosphorus Nitrides up to the Megabar Regime: Synthesis of α'-P3 N5, δ-P3 N5 and PN2.

Invited for the cover of this issue are Dominique Laniel (University of Edinburgh), Florian Trybel (University of Linköping), and their colleagues. The image depicts a bridge built of the newly discovered δ-P3 N5 solid with the structure featuring PN6 units, a previously missing connection between the carbon group elements nitrides and chalcogens nitrides. Read the full text of the article at 10.1002/chem.202201998.

Revealing Phosphorus Nitrides up to the Megabar Regime: Synthesis of α'-P3 N5, δ-P3 N5 and PN2.

Non-metal nitrides are an exciting field of chemistry, featuring a significant number of compounds that can possess outstanding material properties. These properties mainly rely on maximizing the number of strong covalent bonds, with crosslinked XN6 octahedra frameworks being particularly attractive. In this study, the phosphorus-nitrogen system was studied up to 137 GPa in laser-heated diamond anvil cells, and three previously unobserved phases were synthesized and characterized by single-crystal X-ray diffraction, Raman spectroscopy measurements and density functional theory calculations. δ-P3 N5 and PN2 were found to form at 72 and 134 GPa, respectively, and both feature dense 3D networks of the so far elusive PN6 units. The two compounds are ultra-incompressible, having a bulk modulus of K0 =322 GPa for δ-P3 N5 and 339 GPa for PN2 . Upon decompression below 7 GPa, δ-P3 N5 undergoes a transformation into a novel α'-P3 N5 solid, stable at ambient conditions, that has a unique structure type based on PN4 tetrahedra. The formation of α'-P3 N5 underlines that a phase space otherwise inaccessible can be explored through materials formed under high pressure.

A reentrant phase transition and a novel polymorph revealed in high-pressure investigations of CF4 up to 46.5 GPa.

The high-pressure behavior of simple molecular systems, devoid of strong intermolecular interactions, provides a unique avenue toward a fundamental understanding of matter. Tetrahalides of the carbon group elements (group 14), lacking all intermolecular interactions but van der Waals, are among the most elementary of molecular compounds. Here, we report the investigation of CF4 up to 46.5 GPa-the highest pressure up to which any tetrahalides of group 14 elements have been studied so far-by a combination of single-crystal x-ray diffraction (SC-XRDp), Raman spectroscopy, and ab initio calculations. These measurements reveal a pressure-induced reentrant phase transition (phase II →2.8GPa phase III →∼20GPa phase IIR) at room temperature and the formation of a previously unknown CF4 cubic polymorph, named phase IV, after the laser heating of CF4 at 46.5 GPa. In this work, the structures of phases IIR, III, and IV were solved and the atomic coordinates were refined on the basis of SC-XRDp. A comparison of tetrahalides of group 14 elements underlines that reducing the intermolecular halogen-halogen distances leads to a structural rearrangement from close packing of the tetrahedral molecules to close packing of the halogen atoms.

Anionic N18 Macrocycles and a Polynitrogen Double Helix in Novel Yttrium Polynitrides YN6 and Y2 N11 at 100†GPa.

Two novel yttrium nitrides, YN6 and Y2 N11 , were synthesized by direct reaction between yttrium and nitrogen at 100 GPa and 3000 K in a laser-heated diamond anvil cell. High-pressure synchrotron single-crystal X-ray diffraction revealed that the crystal structures of YN6 and Y2 N11 feature a unique organization of nitrogen atoms-a previously unknown anionic N18 macrocycle and a polynitrogen double helix, respectively. Density functional theory calculations, confirming the dynamical stability of the YN6 and Y2 N11 compounds, show an anion-driven metallicity, explaining the unusual bond orders in the polynitrogen units. As the charge state of the polynitrogen double helix in Y2 N11 is different from that previously found in Hf2 N11 and because N18 macrocycles have never been predicted or observed, their discovery significantly extends the chemistry of polynitrides.

Novel High-Pressure Yttrium Carbide γ-Y_{4}C_{5} Containing [C_{2}] and Nonlinear [C_{3}] Units with Unusually Large Formal Charges.

Changes in the bonding of carbon under high pressure leads to unusual crystal chemistry and can dramatically alter the properties of transition metal carbides. In this work, the new orthorhombic polymorph of yttrium carbide, γ-Y_{4}C_{5}, was synthesized from yttrium and paraffin oil in a laser-heated diamond anvil cell at ∼50 GPa. The structure of γ-Y_{4}C_{5} was solved and refined using in situ synchrotron single-crystal x-ray diffraction. It includes two carbon groups: [C_{2}] dimers and nonlinear [C_{3}] trimers. Crystal chemical analysis and density functional theory calculations revealed unusually high noninteger charges ([C_{2}]^{5.2-} and [C_{3}]^{6.8-}) and unique bond orders (<1.5). Our results extend the list of possible carbon states at extreme conditions.

High-Pressure Synthesis of Dirac Materials: Layered van der Waals Bonded BeN_{4} Polymorph.

High-pressure chemistry is known to inspire the creation of unexpected new classes of compounds with exceptional properties. Here, we employ the laser-heated diamond anvil cell technique for synthesis of a Dirac material BeN_{4}. A triclinic phase of beryllium tetranitride tr-BeN_{4} was synthesized from elements at ∼85 GPa. Upon decompression to ambient conditions, it transforms into a compound with atomic-thick BeN_{4} layers interconnected via weak van der Waals bonds and consisting of polyacetylene-like nitrogen chains with conjugated π systems and Be atoms in square-planar coordination. Theoretical calculations for a single BeN_{4} layer show that its electronic lattice is described by a slightly distorted honeycomb structure reminiscent of the graphene lattice and the presence of Dirac points in the electronic band structure at the Fermi level. The BeN_{4} layer, i.e., beryllonitrene, represents a qualitatively new class of 2D materials that can be built of a metal atom and polymeric nitrogen chains and host anisotropic Dirac fermions.

High-Pressure Synthesis of the ß-Zn3N2 Nitride and the α-ZnN4 and ß-ZnN4 Polynitrogen Compounds.

High-pressure nitrogen chemistry has expanded at a formidable rate over the past decade, unveiling the chemical richness of nitrogen. Here, the Zn-N system is investigated in laser-heated diamond anvil cells by synchrotron powder and single-crystal X-ray diffraction, revealing three hitherto unobserved nitrogen compounds: ß-Zn3N2, α-ZnN4, and ß-ZnN4, formed at 35.0, 63.5, and 81.7 GPa, respectively. Whereas ß-Zn3N2 contains the N3- nitride, both ZnN4 solids are found to be composed of polyacetylene-like [N4]∞2- chains. Upon the decompression of ß-ZnN4 below 72.7 GPa, a first-order displacive phase transition is observed from ß-ZnN4 to α-ZnN4. The α-ZnN4 phase is detected down to 11.0 GPa, at lower pressures decomposing into the known α-Zn3N2 (space group Ia3̅) and N2. The equations of states of ß-ZnN4 and α-ZnN4 are also determined, and their bulk moduli are found to be K0 = 126(9) GPa and K0 = 76(12) GPa, respectively. Density functional theory calculations were also performed and provide further insight into the Zn-N system. Moreover, comparing the Mg-N and Zn-N systems underlines the importance of minute chemical differences between metal cations in the resulting synthesized phases.

High-Pressure Polymeric Nitrogen Allotrope with the Black Phosphorus Structure.

Studies of polynitrogen phases are of great interest for fundamental science and for the design of novel high energy density materials. Laser heating of pure nitrogen at 140 GPa in a diamond anvil cell led to the synthesis of a polymeric nitrogen allotrope with the black phosphorus structure, bp-N. The structure was identified in situ using synchrotron single-crystal x-ray diffraction and further studied by Raman spectroscopy and density functional theory calculations. The discovery of bp-N brings nitrogen in line with heavier pnictogen elements, resolves incongruities regarding polymeric nitrogen phases and provides insights into polynitrogen arrangements at extreme densities.

High Pressure Investigation of the S-N2 System up to the Megabar Range: Synthesis and Characterization of the SN2 Solid.

Sulfur and nitrogen represent one of the most studied inorganic binary systems at ambient pressure on account of their large wealth of metastable exotic ring-like compounds. Under high pressure conditions, however, their behavior is unknown. Here, sulfur and nitrogen were compressed in a diamond anvil cell up to about 120 GPa and laser-heated at regular pressure intervals in an attempt to stabilize novel sulfur-nitrogen compounds. Above 64 GPa, an orthorhombic (space group Pnnm) SN2 compound was synthesized and characterized by single-crystal and powder X-ray diffraction as well as Raman spectroscopy. It is shown to adopt a CaCl2-type structure-hence it is isostructural, isomassic, and isoelectronic to CaCl2-type SiO2-comprised of SN6 octahedra. Complementary theoretical calculations were performed to provide further insight into the physicochemical properties of SN2, notably its equation of state, the bonding type between its constitutive elements, and its electronic density of states. This new solid is shown to be metastable down to about 20 GPa, after which it spontaneously decomposes into S and N2. This investigation shows that despite the many metastable S-N compounds existing at ambient conditions, none of them are formed by pressure.

High Pressure and High Temperature Synthesis of the Iron Pernitride FeN2.

The high pressure chemistry of transition metals and nitrogen was recently discovered to be richer than previously thought, due to the synthesis of several transition metal pernitrides. Here, we explore the pressure-temperature domain of iron with an excess of nitrogen up to 91 GPa and 2200 K. Above 72 GPa and 2200 K, the iron pernitride FeN2 is produced in a laser-heated diamond anvil cell. This iron-nitrogen compound is the first with a N/Fe ratio greater than 1. The FeN2 samples were characterized from the maximum observed pressure down to ambient conditions by powder X-ray diffraction and Raman spectroscopy measurements. The crystal structure of FeN2 is resolved to be a Pnnm marcasite structure, analogously to other transition metal pernitrides. On the basis of the lattice's axial ratios and the recorded N-N vibrational modes of FeN2, a bond order of 1.5 for the nitrogen dimer is suggested. The bulk modulus of the iron pernitride is determined to be of K0 = 344(13) GPa, corresponding to an astounding increase of about 208% from pure iron. Upon decompression to ambient conditions, a partial structural phase transition to the theoretically predicted R3̅ m FeN2 is detected.

Direct Reaction of Nitrogen and Lithium up to 75 GPa: Synthesis of the Li3N, LiN, LiN2, and LiN5 Compounds.

A wide variety of Li-N compounds are predicted as stable under pressure and associated with various nitrogen anionic moieties. Accordingly, the LiN5 compound was recently synthesized at 45 GPa by the direct reaction of nitrogen and lithium. In this study, we present an experimental investigation of the Li-N binary phase diagram from ambient pressure up to 73.6 GPa. The samples loaded in the diamond anvil cells were constituted of pure lithium pieces embedded in a much greater quantity of molecular nitrogen and, at incremental pressure steps, were laser-heated to produce the thermodynamically favored solid. The following compounds are observed: Li3N, LiN2, LiN as well as LiN5, and their pressure stability domain is disclosed. Two are synthesized for the first time, namely  Cmcm LiN and P63/ mmc LiN2. Both are structurally resolved and characterized by X-ray diffraction and Raman spectroscopy measurements. Their high bulk modulus is characteristic of charged N2 dimers.

Heat, pressure and light-induced interconversion of bisdithiazolyl radicals and dimers.

The heterocyclic bisdithiazolyl radical 1b (R1 = Me, R2 = F) crystallizes in two phases. The α-phase, space group P21/n, contains two radicals in the asymmetric unit, both of which adopt slipped π-stack structures. The ß-phase, space group P21/c, consists of cross-braced π-stacked arrays of dimers in which the radicals are linked laterally by hypervalent 4-center 6-electron S···S-S···S σ-bonds. Variable-temperature magnetic susceptibility measurements on α-1b indicate Curie-Weiss behavior (with Θ = -14.9 K), while the dimer phase ß-1b is diamagnetic, showing no indication of thermal dissociation below 400 K. High-pressure crystallographic measurements indicate that the cross-braced π-stacked arrays of dimers undergo a wine-rack compression, but the dimer remains intact up to 8 GPa (at ambient temperature). The resistance of ß-1b to dissociate under pressure, also observed in its conductivity versus pressure profile, is in marked contrast to the behavior of the related dimer ß-1a (R1 = Et, R2 = F), which readily dissociates into a pair of radicals at 0.8 GPa. The different response of the two dimers to pressure has been rationalized in terms of differences in their linear compressibilities occasioned by changes in the degree of cross-bracing of the π-stacks. Dissociation of both dimers can be effected by irradiation with visible (λ = 650 nm) light; the transformation has been monitored by optical spectroscopy, magnetic susceptibility measurements, and single crystal X-ray diffraction. The photoinduced radical pairs persist up to temperatures of 150 K (ß-1b) and 242 K (ß-1a) before reverting to the dimer state. Variable-temperature optical measurements on ß-1b and ß-1a have afforded Arrhenius activation energies of 8.3 and 19.6 kcal mol(-1), respectively, for the radical-to-dimer reconversion. DFT and CAS-SCF calculations have been used to probe the ground and excited electronic state structures of the dimer and radical pair. The results support the interpretation that the ground-state interconversion of the dimer and radical forms of ß-1a and ß-1b is symmetry forbidden, while the photochemical transformation is symmetry allowed.

High pressure study of a highly energetic nitrogen-rich carbon nitride, cyanuric triazide.

Cyanuric triazide (CTA), a nitrogen-rich energetic material, was compressed in a diamond anvil cell up to 63.2 GPa. Samples were characterized by x-ray diffraction, Raman, and infrared spectroscopy. A phase transition occurring between 29.8 and 30.7 GPa was found by all three techniques. The bulk modulus and its pressure derivative of the low pressure phase were determined by fitting the 300 K isothermal compression data to the Birch-Murnaghan equation of state. Due to the strong photosensitivity of CTA, synchrotron generated x-rays and visible laser radiation both lead to the progressive conversion of CTA into a two dimensional amorphous C=N network, starting from 9.2 GPa. As a result of the conversion, increasingly weak and broad x-ray diffraction lines were recorded from crystalline CTA as a function of pressure. Hence, a definite structure could not be obtained for the high pressure phase of CTA. Results from infrared spectroscopy carried out to 40.5 GPa suggest the high pressure formation of a lattice built of tri-tetrazole molecular units. The decompression study showed stability of the high pressure phase down to 13.9 GPa. Finally, two CTA samples, one loaded with neon and the other with nitrogen, used as pressure transmitting media, were laser-heated to approximately 1100 K and 1500 K while compressed at 37.7 GPa and 42.0 GPa, respectively. In both cases CTA decomposed resulting in amorphous compounds, as recovered at ambient conditions.

Dense nitrogen-rich energetic materials: a study of 5,5'-bis(1H-tetrazolyl)amine [corrected].

5,5'-bis(1H-tetrazolyl)amine (BTA), a nitrogen rich molecular solid has been investigated under compression at room temperature [corrected]. Powder x-ray diffraction using synchrotron radiation and micro-Raman spectroscopy were carried out to pressures up to 12.9 GPa. BTA conserves the crystalline structure of its room condition phase up to the highest pressure, i.e., an orthorhombic unit cell (Pbca). A fit of the isothermal compression data to the Birch-Murnaghan equation of state reveals the high compressibility of BTA. An analysis of the volume change with pressure yields a bulk modulus and its derivative similar to that of high-nitrogen content molecular crystals. Upon laser heating to approximately 1100 K, the sample decomposed while pressurized at 2.1 GPa, resulting in a graphitic compound. Finally, numerical simulations demonstrate that the minimum energy conformation is not experimentally observed since a higher energy conformation allows for a more stable dense packing of the BTA molecules.

Stabilization of N6 and N8 anionic units and 2D polynitrogen layers in high-pressure scandium polynitrides.

Nitrogen catenation under high pressure leads to the formation of polynitrogen compounds with potentially unique properties. The exploration of the entire spectrum of poly- and oligo-nitrogen moieties is still in its earliest stages. Here, we report on four novel scandium nitrides, Sc2N6, Sc2N8, ScN5, and Sc4N3, synthesized by direct reaction between yttrium and nitrogen at 78-125 GPa and 2500 K in laser-heated diamond anvil cells. High-pressure synchrotron single-crystal X-ray diffraction reveals that in the crystal structures of the nitrogen-rich Sc2N6, Sc2N8, and ScN5 phases nitrogen is catenated forming previously unknown N66- and N86- units and ∞ 2 ( N 5 3 - ) anionic corrugated 2D-polynitrogen layers consisting of fused N12 rings. Density functional theory calculations, confirming the dynamical stability of the synthesized compounds, show that Sc2N6 and Sc2N8 possess an anion-driven metallicity, while ScN5 is an indirect semiconductor. Sc2N6, Sc2N8, and ScN5 solids are promising high-energy-density materials with calculated volumetric energy density, detonation velocity, and detonation pressure higher than those of TNT.

Diverse high-pressure chemistry in Y-NH3BH3 and Y-paraffin oil systems.

The yttrium-hydrogen system has gained attention because of near-ambient temperature superconductivity reports in yttrium hydrides at high pressures. We conducted a study using synchrotron single-crystal x-ray diffraction (SCXRD) at 87 to 171 GPa, resulting in the discovery of known (two YH3 phases) and five previously unknown yttrium hydrides. These were synthesized in diamond anvil cells by laser heating yttrium with hydrogen-rich precursors-ammonia borane or paraffin oil. The arrangements of yttrium atoms in the crystal structures of new phases were determined on the basis of SCXRD, and the hydrogen content estimations based on empirical relations and ab initio calculations revealed the following compounds: Y3H11, Y2H9, Y4H23, Y13H75, and Y4H25. The study also uncovered a carbide (YC2) and two yttrium allotropes. Complex phase diversity, variable hydrogen content in yttrium hydrides, and their metallic nature, as revealed by ab initio calculations, underline the challenges in identifying superconducting phases and understanding electronic transitions in high-pressure synthesized materials.