Transplacental Transfer and Fetal Pharmacodynamics of Sildenafil in the Pregnant Sheep Model.

BACKGROUND: Sildenafil is a phosphodiesterase-5 inhibitor considered for antenatal use for a variety of indications. We sought to assess sildenafil pharmacokinetics in the pregnant ewe and fetus and evaluate its physiological fetal effects. METHODS: Twelve fetal lambs (127-133 days GA, term 145) were chronically catheterized in utero. Ewes received different doses of sildenafil, either via subcutaneous injection (1.6, 2.0 mg/kg/day) or intravenous (IV) infusion (3, 5, 7, 10, and 12 mg/kg/day). Maternal and fetal sildenafil concentrations and metabolic status (blood gas analysis) were measured at given intervals. The fetal heart rate, pulmonary blood flow, systemic and aortic pressure, and maternal uterine artery pressure were continuously monitored. RESULTS: The transplacental sildenafil transfer was 2.9% (range: 1.4-7.8%), preventing attainment of fetal target concentrations without toxic maternal levels. IV sildenafil infusion induced an immediate, temporary, dose-dependent reduction of pulmonary vascular resistance (38-78%) and increased both pulmonary blood flow (32-132%) and heart rate (13-49%), with limited nonlinear dose-dependent effects on systemic and pulmonary pressures. Fetal and maternal blood gases and maternal uterine artery pressures were unaffected by sildenafil infusion. CONCLUSION: In sheep, transplacental transfer of sildenafil is extremely low. Though, minimal fetal sildenafil concentrations induce an acute transient pulmonary vasodilation, well-tolerated by the fetus and ewe.

Intraventricular dopamine infusion alleviates motor symptoms in a primate model of Parkinson's disease.

BACKGROUND: Continuous compensation of dopamine represents an ideal symptomatic treatment for Parkinson's disease (PD). The feasibility in intracerebroventricular administration (i.c.v.) of dopamine previously failed because of unresolved dopamine oxidation. OBJECTIVES: We aim to test the feasibility, safety margins and efficacy of continuous i.c.v. of anaerobic-dopamine (A-dopamine) with a pilot translational study in a non-human primate model of PD. METHODS: Continuous and circadian i.c.v. of A-dopamine was administered through a micro-pump connected to a subcutaneous catheter implanted into the right frontal horn of 8 non-human primates treated with 1-methyl-4- phenyl-1,2,3,6-tetrahydropyridine (MPTP). A-dopamine was assessed at acute doses previously reported for dopamine as well as evaluating the long term therapeutic index of A-dopamine in comparison to anaerobically prepared L-dopa or methyl ester L-dopa. RESULTS: Over 60 days of a continuous circadian i.c.v. of A-dopamine improved motor symptoms (therapeutic index from 30 to 70 mg/day) without tachyphylaxia. No dyskinesia was observed even with very high doses. Death after 1 to 10 days (without neuronal alteration) was only observed with doses in excess of 160 mg whereas L-dopa i.c.v. was not effective at any dose. The technical feasibility of the administration regimen was confirmed for an anaerobic preparation of dopamine and for administration of a minimal infusion volume by micro-pump at a constant flow that prevented obstruction. CONCLUSION: Continuous circadian i.c.v. of A-dopamine appears to be feasible and shows efficacy without dyskinesia with a safe therapeutic index.

Quality control and stability of ketamine, remifentanil, and sufentanil syringes in a pediatric operating theater.

BACKGROUND: Transforming a drug from its commercial form into a ready-to-use drug is common practice, especially in pediatrics. However, the risk of compounding error is real and data on drug stability in practice are not always available. AIMS: The aim of this study was to assess, in real conditions, both the error rate and stability of three drugs: ketamine, remifentanil, and sufentanil. METHODS: A new rapid and easy-to-use high-performance liquid chromatography method with a diode array detector has been developed and validated to quantify these drugs and detect their degradation products. Over a 1-month period, 151 syringes were collected in the postanesthesia care unit. Seventy-three were stock solution syringes containing a 10-fold dilution of commercial drugs and 78 were serial dilution syringes made from successive dilutions of stock solutions. A comparison between real and expected concentrations as well as the detection of possible degradation products was carried out on these samples. RESULTS: All stock solution syringes had good chemical stability throughout the working day. A 4-µg/mL remifentanil serial dilution syringe, however, had to be discarded as a degradation peak was detected. Overall, 15.3% (95% CI, 9.5-21.1%) of syringes had a drug concentration outside the ±10% acceptability range, that is, 11.0% (95% CI, 3.7-18.2%) and 19.5% (95% CI, 10.6%-28.4%) of stock and diluted syringes respectively, with drug amounts ranging from -25.3% to 22.0%. The highest error rates were observed with sufentanil syringes: 20% and 28% for stock solution and serial dilution, respectively. CONCLUSION: The study shows that stock solution syringes prepared in advance are chemically stable throughout the day, unlike certain serial dilution syringes, indicating that the latter should be prepared just before administration to ensure chemical stability. Our results show that the error rate for serial dilution syringes is twice that of stock solution. Different safety measures are under discussion and have to be further studied.

Immunoassay quantification of human insulin added to ternary parenteral nutrition containers: comparison of two methods.

Adding insulin directly into infusion bags seems to be a useful method for controlling hyperglycemia in patients under ternary parenteral nutrition (TPN). Its efficacy is assessed by glycemic monitoring but few data are available on insulin stability in this situation. Among the various methods for quantifying insulin levels in human serum, the immunoassay ones seemed potentially appropriate for a TPN admixture containing high lipid concentrations. We sought to identify and validate which of two immunoassay methods was the better to quantify human insulin and consequently be adapted to studying its stability in a TPN admixture. Two immunoassay methods to quantify recombinant human insulin were assessed in industrial TPN: an immunoradiometric assay (IRMA) and an immunoelectrochemiluminometric assay (IECMA). Validation trials for both methods were based on the accuracy profile method. Interference with immunometric assays due to the high lipidic content of TPN was eliminated through an improved preparation protocol using a bovine serum albumin (BSA) diluted in phosphate buffer saline (PBS). The relative total error of IECMA varied from 1.74 to 4.52% while it varied from -0.32 to 8.37% with IRMA. Only IECMA provided an accuracy profile with a 95% confidence interval of calculated-tolerance limits falling between the chosen acceptance limits (i.e., total error ≤±10%). IECMA combined with a BSA dilution is a simple and semi-automatic method that provides an accurate quantification of human insulin in a TPN admixture without any interference from lipids.

Stability of 10 mg/mL cefuroxime solution for intracameral injection in commonly used polypropylene syringes and new ready-to-use cyclic olefin copolymer sterile vials using the LC-UV stability-indicating method.

CONTEXT: Injecting intracameral cefuroxime has been found beneficial in reducing the risk of postoperative endophthalmitis but its use has been limited through a lack of approved marketing and of ready-to-use single-units as well as the problem of aseptic compounding. OBJECTIVE: Our aim was to assess a new automated primary packaging system which should ensure a higher level of sterility, thanks to its closed, sterile, ready-to-use polymer vial called "Crystal® vial". The chemical stability of a 10 mg/mL cefuroxime solution was compared in 1 mL Crystal® vials and 1 mL Luer-lock polypropylene syringes (actual reference) to eliminate any potential and specific interactions with its cyclic olefin copolymer (COC) body and elastomer stopper. METHODS: Cefuroxime solution was introduced into vials and syringes and stored at -20 °C, +5 °C and +25°C/60% Relative Humidity. Cefuroxime concentration and the relative amount of the main degradation product (descarbamoyl-cefuroxime) were both determined by an HPLC/UV method indicating stability. Solutions were considered steady if the concentration remained at over 90% of the initial value. In the adapted storage conditions, the evolution of osmolality, pH and sterility was assessed. RESULTS: Stability profiles were identical between vials and syringes in all storage and temperature conditions. The solution was stable (cefuroxime concentration, pH and osmolality) and still sterile for 365 days at -20°C. The concentration fell below 90% after 21 days at +5 °C and after 16 h at +25°C/60%s relative humidity. CONCLUSIONS: The COC and thermoplastic elastomer of the vials had no impact on the degradation process confirming its possible use for a ready-to-use cefuroxime solution single-unit dose.

Economic assessment of aseptic compounding rooms in hospital pharmacies in five European countries.

PURPOSE: The aims of the study are to make an inventory of fixtures of aseptic compounding structures, to compare, using real examples, the design and operating costs of controlled atmosphere area (CAA) with isolators and CAA with laminar flow biological safety cabinets (BSCs) in order to determine the most economical scheme in hospitals and to give a final facilities cost calculated for one workstation. METHODS: Forty-three hospitals were interviewed (21 French and 22 from four European countries) over seven months. Hospital pharmacists completed a form with 390 items. Hospitals are compared according to their workstation type: BSCII or BSCIII (group B) and isolator (group I), using Mann and Whitney's statistical test and Monte-Carlo modeling. RESULTS: Twenty-one hospitals responded (11 French and 10 from other European countries). All European compounding unit organizations are not significantly different. The study compared items such as infrastructure cost, equipment cost, staff cost, consumable cost, cleaning cost and control cost. A synthesis of all costs has been drafted to calculate an estimated preparation cost which seemed to be higher for group B than for group I when staff costs were included ($46 and $31, respectively, in study conditions). CONCLUSIONS: The different costs studied have revealed little significant difference between group B and I. The preparation cost in group B appears higher than in group I. This pilot study has resulted in the calculation of an estimated manufactured preparation cost but this work should be completed to help optimize resources and save money.

Combination of a propofol emulsion with alpha-2 adrenergic receptor agonists used for multimodal analgesia or sedation in intensive care units: a physicochemical stability study.

OBJECTIVES: To assess the physicochemical stability of the combination of a propofol emulsion with an alpha-2 (α2) adrenergic receptor agonist (α2A; clonidine or dexmedetomidine) under conditions mimicking routine practice in an intensive care unit or in multimodal analgesia procedures. METHODS: We developed and validated three stability-indicating methods based on high-performance liquid chromatography with ultraviolet (HPLC-UV) detection. Eight different conditions per combination were evaluated in triplicate, with variations in the simulated, bodyweight-adjusted dose level and the drugs' flow rate. The drugs were mixed in clinically relevant concentrations and proportions and then stored unprotected from light, in clear glass vials at room temperature for 96 hours. At each sampling point, we assessed the chemical stability (the HPLC-UV drug level, pH, and osmolality) and physical compatibility (visual aspect, zeta potential (ZP), mean droplet diameter (MDD, Z-average) and polydispersity index (PDI)). We validated our stability findings in positive and negative control experiments. RESULTS: Over the 96-hour test, the concentrations of propofol, clonidine and dexmedetomidine did not fall below 90% of the initial value, and the pH and osmolality were stable. The visual aspect of the mixed propofol emulsions did not change. The MDD remained below 500 nm (range 165-195 nm). The PDI was always below 0.4; 78.7% of the measurements were below 0.1 and 21.3% were between 0.1 and 0.4. The ZP measurements (-31.3 to -42.9 mV) suggested that the emulsion was stable. The MDD and PDI increased slightly at 96 hours under some conditions, which might indicate early destabilisation of the emulsion. Given that the MDD remained below 500 nm, these emulsions are compatible with intravenous administration. CONCLUSIONS: Our results demonstrate the chemical and physical compatibility of propofol-α2 agonist mixtures at concentrations and in proportions representative of standard protocols when stored unprotected from light at room temperature for 96 hours.

Cistracurium Besylate 10 mg/mL Solution Compounded in a Hospital Pharmacy to Prevent Drug Shortages: A Stability Study Involving Four Degradation Products.

BACKGROUND: Stability study of a 10 mg/mL injectable cisatracurium solution stored refrigerated in amber glass ampoules for 18 months (M18). METHODS: 4000 ampoules were aseptically compounded using European Pharmacopoeia (EP)-grade cisatracurium besylate, sterile water for injection, and benzenesulfonic acid. We developed and validated a stability-indicating HPLC-UV method for cisatracurium and laudanosine. At each stability study time point, we recorded the visual aspect, cisatracurium and laudanosine levels, pH, and osmolality. Sterility, bacterial endotoxin content, and non-visible particles in solution were checked after compounding (T0) and after M12 and M18 of storage. We used HPLC-MS/MS to identify the degradation products (DPs). RESULTS: During the study, osmolality remained stable, pH decreased slightly, and the organoleptic properties did not change. The number of non-visible particles remained below the EP's threshold. Sterility was preserved, and bacterial endotoxin level remained below the calculated threshold. Cisatracurium concentration remained within the ±10% acceptance interval for 15 months and then decreased to 88.7% of C0 after M18. The laudanosine generated accounted for less than a fifth of the cisatracurium degradation, and three DPs were generated-identified as EP impurity A, impurities E/F, and impurities N/O. CONCLUSION: Compounded 10 mg/mL cisatracurium injectable solution is stable for at least 15 months.

The impact on drug mass flow rate of interrupting and resuming carrier fluid flow: an in vitro study on a very low dead-space volume infusion set.

BACKGROUND: Stopping and resuming carrier fluid flow can lead to potentially dangerous transient disturbances in drug mass flow rate. We compared the impact of 2 infusion sets, one with very low dead-space volume and the other with greater dead-space volume, on the amount of drug delivered during stop-and-go carrier fluid flows. METHODS: Two infusion sets, both with antireflux, connected to an angiocatheter and with dead-space volumes of 6.185 mL and 0.071 mL, respectively, were assessed. Two protocols were studied: carrier fluid flow of 90 mL/h associated with noradrenaline infused at 7 mL/h and carrier fluid flow of 350 mL/h with a noradrenaline infusion flow of 65 mL/h. During both protocols, the carrier fluid was stopped and resumed at the same rate 30 minutes later. Effluent noradrenaline concentration was measured using UV spectrophotometry. Flow change efficiency was calculated from the ratio of the area under the experimental mass flow rate curve to the area under the theoretical instantaneous mass flow rate curve. RESULTS: For both flow rate conditions, flow change efficiency was significantly different for the 2 infusion sets during the 10-minute period after stopping carrier fluid flow and the 10-minute period after restarting it. The major phenomena were sudden decreases in drug delivery after stopping carrier flow and sudden, temporary increases when it was resumed. The very low dead-space volume infusion set resulted in significant reduction in changes in drug delivery compared with the standard set, even at high flow rates. CONCLUSION: The use of a very low dead-space volume set attenuates disturbances in drug delivery caused by interrupting and resuming carrier fluid flow.

Behavior of Regular Insulin in a Parenteral Nutrition Admixture: Validation of an LC/MS-MS Assay and the In Vitro Evaluation of Insulin Glycation.

Parenteral-nutrition (PN)-induced hyperglycemia increases morbidity and mortality and must be treated with insulin. Unfortunately, the addition of insulin to a ternary PN admixture leads to a rapid decrease in insulin content. Our study's objective was to determine the mechanistic basis of insulin's disappearance. The literature data suggested the presence of a glycation reaction; we therefore validated an LC-MS/MS assay for insulin and glycated insulin. In a 24-h stability study, 20 IU/L of insulin was added to a binary PN admixture at pH 3.6 or 6.3. When the samples were diluted before analysis with a near-neutral diluent, insulin was fully stable at pH 3.6, while a loss of around 50% was observed at pH 6.3. Its disappearance was shown to be inversely correlated with the appearance of monoglycated insulin (probably a Schiff base adduct). Monoglycated insulin might also undergo a back-reaction to form insulin after acidic dilution. Furthermore, a second monoglycated insulin species appeared in the PN admixture after more than 24 h at high temperature (40 °C) and a high insulin concentration (1000 IU/L). It was stable at acidic pH and might be an Amadori product. The impact of insulin glycation under non-forced conditions on insulin's bioactivity requires further investigation.

[Oral drugs containing alcohol: Should we be careful?] / Médicaments par voie orale contenant de l'alcool : faut-il être vigilant ?

Ethanol is an excipient with known effect whose presence is regulated because it can cause adverse effects, notably a misuse. In order to raise awareness of this risk, this study searched all oral drugs with ethanol as an excipient from the Theriaque® database. All drugs marketed in France with a unit dose ethanol intake of 0.1g or more were identified and analyzed, according to the maximum unit and daily dosage recommended by the manufacturer. This research revealed 106 pharmaceutical specialties responsible for a unit intake of ethanol of 0.1g or more among the 8532 oral drugs containing ethanol (1.2 %): 2 at a daily dose >13g and the majority (57/106; 54 %) at a daily dose <1g. These are mainly oral solutions (97/106; 91 %) of phytotherapy (45/97; 46 %). The most frequently found therapeutic class was antitussive (12/106; 11 %). The majority of drugs are over-the-counter medication (56/106; 53 %). Overall, 106 drugs on the French market can be associated with a risk of misuse and cause adverse effects in vulnerable populations such as children and pregnant women. Vigilance and appropriate monitoring is required for these drugs (especially those over-the-counter ones), and their substitution should be preferred if possible.

Factors influencing accuracy when preparing injectable drug concentrations in appliance with clinical practice: a norepinephrine case study.

Errors in injectable preparations with high-risk drugs can be fatal. This study aimed to identify the factors influencing the accuracy of high-risk injectable drug concentrations in appliances used for intensive care unit preparation practices. Norepinephrine (NE) was chosen as an example of a high-risk medication drug. The concentration (0.2 and 0.5 mg/mL), the diluent (sodium chloride 0.9% and 5% dextrose), and the container type (prefilled- and empty-infusion bag and syringe) were tested as potential variability factors. An ultraviolet spectrophotometric method was used for NE dosage. 108 NE solutions were prepared by five individuals (pharmacists or laboratory technicians) with clinical experience as well as experience in the aseptic preparation of solutions. The container type was found to be the only factor influencing the accuracy of NE concentration. NE solutions in syringes proved to be the most accurate while preparations in prefilled bags tended to underdose NE.

Addition of Regular Insulin to Ternary Parenteral Nutrition: A Stability Study.

BACKGROUND: Parenteral nutrition (PN) is a complex medium in which added insulin can become unstable. The aim of this study is, therefore, to evaluate the stability of insulin in PN and to identify influencing factors. METHODS: A total of 20 IU/L of regular insulin was added to PN in either glass or Ethylene Vinyl Acetate (EVA) containers. A 24 h stability study was performed via an electrochemiluminescence immunoassay in different media: A ternary PN admixture, separate compartments of the PN bag and a binary admixture. This study was repeated in the absence of zinc, with the addition of serum albumin or tween and with pH adjustment (3.6 or 6.3). Insulin concentration at t time was expressed as a percentage of the initial insulin concentration. Analysis of covariance (ANCOVA) was applied to determine the factors that influence insulin stability. RESULTS: In all PN admixtures, the insulin concentration ratio decreased, stabilising at a 60% and then plateauing after 6 h. At pH 3.6, the ratio was above 90%, while at pH 6.3 it decreased, except in the amino acid solution. ANCOVA (r2 = 0.68, p = 0.01) identified dextrose and pH as significant factors influencing insulin stability. CONCLUSION: A low pH level seems to stabilise insulin in PN admixtures. The influence of dextrose content suggests that insulin glycation may influence stability.

Cost-effectiveness of taurolidine locks to prevent recurrent catheter-related blood stream infections in adult patients receiving home parenteral nutrition: a 2-year mirror-image study.

BACKGROUND & AIMS: The use of long-term taurolidine locks (LTTL) seems to be effective in preventing catheter-related blood stream infections (CRBSI), especially in patients on home parenteral nutrition (HPN). This work targets the cost-effectiveness of LTTL in a cohort of adult HPN patients. METHODS: A monocentric mirror-image design study was conducted in our referral centre among long-term HPN patients experiencing recurrent CRBSI. From 7th January 2011, LTTL were started after the third CRBSI episode within 12 months. CRBSI data was prospectively collected until 7th January 2013, in the same way as it had retrospectively been done before initiating LTTL. A cost-effective analysis was conducted to estimate the incremental costs and effects on CRBSI with LTTL. The efficacy of LTTL on CRBSI rate was assessed over 1000 days of catheter use. RESULTS: A total of 31,100 catheter days were analysed in 37 patients (median [interquartile range (IQR)]) aged 58 [42-68] years. The mean ± SD proven CRBSI rate was 3.18 ± 3.51 per 1000 catheter days before the introduction of LTTL and 0.39 ± 1.50 per 1000 catheter days after its introduction (p < 0.0001). Considering both proven and probable CRBSI requiring hospital management, LTTL reduced by (mean [bootstrap CI 95%]) -2.63 [-3.26 to -2.06] infections per patient (from 2.89 [2.31 to 3.49] before to 0.26 [0.13 to 0.41] after) as well as incremental costs by -7 258 [-10 450 to -4 016] € (from 11 176 [8 004 to 14 968] € before to 3 918 [2 390 to 5 445] € after). CONCLUSION: Implementing LTTL to prevent recurrent CRBSI is cost-effective by dramatically decreasing their incidence.

A Case of Phage Therapy against Pandrug-Resistant Achromobacter xylosoxidans in a 12-Year-Old Lung-Transplanted Cystic Fibrosis Patient.

Bacteriophages are a promising therapeutic strategy among cystic fibrosis and lung-transplanted patients, considering the high frequency of colonization/infection caused by pandrug-resistant bacteria. However, little clinical data are available regarding the use of phages for infections with Achromobacter xylosoxidans. A 12-year-old lung-transplanted cystic fibrosis patient received two rounds of phage therapy because of persistent lung infection with pandrug-resistant A. xylosoxidans. Clinical tolerance was perfect, but initial bronchoalveolar lavage (BAL) still grew A. xylosoxidans. The patient's respiratory condition slowly improved and oxygen therapy was stopped. Low-grade airway colonization by A. xylosoxidans persisted for months before samples turned negative. No re-colonisation occurred more than two years after phage therapy was performed and imipenem treatment was stopped. Whole genome sequencing indicated that the eight A. xylosoxidans isolates, collected during phage therapy, belonged to four delineated strains, whereby one had a stop mutation in a gene for a phage receptor. The dynamics of lung colonisation were documented by means of strain-specific qPCRs on different BALs. We report the first case of phage therapy for A. xylosoxidans lung infection in a lung-transplanted patient. The dynamics of airway colonization was more complex than deduced from bacterial culture, involving phage susceptible as well as phage resistant strains.

Infusion set characteristics such as antireflux valve and dead-space volume affect drug delivery: an experimental study designed to enhance infusion sets.

BACKGROUND: The ability of an infusion set to deliver a specific amount of drug to the patient can be directly related to the presence of an antireflux valve and dead-space volume. In this study we quantified separately the impact of these 2 components on drug delivery. METHODS: Various infusion sets were assessed differing in length, in dead-space volume, and with or without an antireflux valve. Noradrenaline was infused with a syringe pump simultaneously with a carrier flow. Effluent drug concentration was measured using ultraviolet spectrophotometry. Flow change efficiency (FCE) was calculated from the ratio of the area under the experimental mass flow rate curve to the area under the theoretical instantaneous mass flow rate curve. RESULTS: The FCE for infusion sets with or without antireflux valves were significantly different 10 to 15 minutes after the start of an infusion at flow rates of 7 mL/h for noradrenaline and 35 mL/h to 70 mL/h for the carrier fluid. They were not different with a carrier flow of 115 mL/h. DISCUSSION: These findings suggest that antireflux valves have a significant impact on FCE when the ratio of drug flow rate to carrier fluid flow rate is high. Infusion sets with very low dead-space volume connectors yield better FCE. There is a nonlinear relationship between dead-space volume and FCE 5 to 10 minutes after the onset of drug infusion. CONCLUSION: Care providers must consider dead-space volume and the presence of an antireflux valve when choosing their infusion sets.

Long-term stability of ready-to-use norepinephrine solution at 0.2 and 0.5 mg/mL.

Objectives: Norepinephrine is a vasopressor frequently administered after dilution to treat hypotension and shocks in intensive care units. The stability of norepinephrine is known to be highly sensitive to storage conditions. Moreover, medication errors linked to the dilution step are frequent and may be deleterious for critically-ill patients, especially in intensive care units. This study aimed to evaluate the stability of ready-to-use diluted norepinephrine solutions prepared at two target concentrations (0.2 and 0.5 mg/mL), according to the summary of product characteristics, and stored for 365 days in two containers: AT-closed cyclic olefin copolymer vials, and polypropylene syringes. Methods: A fast reversed-phase liquid chromatography method coupled with an ultra-violet detector was developed to assess the chemical stability of norepinephrine solutions. Validation was conducted according to the linearity of the calibration ranges, selectivity, sensitivity, accuracy and precision. Dosage, sub-visible particle contamination, pH monitoring and sterility assays were performed. Chemical stability was maintained if the measured concentration respected the lower limit of 90% of the initial concentration. Containers were stored at -20±5°C, +5±3°C and +25±2°C with 60±5% relative humidity in a dark closed enclosure. Results: Stability was successfully maintained for every concentration and container tested when stored at -20±5°C and +5±3°C. In these storage conditions, particle contamination, pH monitoring and sterility assay respected the required criteria. Chemical degradation and colouring of solutions appeared before the end of the 1 year study period for most norepinephrine solutions stored at room temperature. Conclusions: Ready-to-use solutions containing 0.2 and 0.5 mg/mL norepinephrine in polypropylene syringes or cyclic olefin copolymer vials must be stored at refrigerated or frozen temperatures to obtain acceptable 1 year shelf-stability. Exposure to higher temperatures significantly decreases shelf-stability. Our study protocol for compounding polypropylene syringes and cyclic olefin copolymer vials containing norepinephrine is adapted to implementation in centralised intravenous additive services.

Stability of frozen 1% voriconazole eye-drops in both glass and innovative containers.

PURPOSE: To assess the physico-chemical stability of Voriconazole Eye-Drops (VED), when stored frozen and refrigerated once thawed, in 3 containers: Amber glass with a Low-Density PolyEthylene (LDPE) eyedropper, and two types of LDPE bottles: one classical and one with an innovative insert that maintains sterility after opening (Novelia® from Nemera). METHODS: Three batches of 1% VED (10 mL) were aseptically compounded from marketed injectable voriconazole (Vfend®) diluted in sterile water for injection. VEDs were stored for three months at -20 °C in amber glass (n = 32), classical LDPE (n = 32) or innovative LDPE (n = 31) bottles. Stability-indicating (HPLC-UV-DAD) and chiral chromatography methods were developed. The stability study was conducted according to GERPAC-SFPC guidelines. At each study time, the following parameters were controlled: visual aspect, voriconazole concentration, pH and osmolality. In addition, non-visible particle count, sterility and absence of racemisation (impurity D - (2S,3R)-voriconazole) were assessed at the beginning and end of the study. Results are expressed as mean ± standard deviation. Statistical analyses were performed using non-parametric tests (α < 5%) to compare containers. RESULTS: When stored frozen, concentration was between 95.2 ±â€¯1.4% and 103.6 ±â€¯1.3% of the initial concentration (C0) with no difference between the three containers (p = 0.564; non-significant). Fifteen days after thawing, concentration was between 97.1 ±â€¯1.6% and 98.6 ±â€¯0.8% of C0 with no difference between containers (p = 0.278 and 0.368 for VED thawed at room temperature and at 2-8 °C, respectively). pH remained stable between each time. Osmolality was slightly higher in glass (533.17 ±â€¯8.93 mOsm/Kg) than in plastic containers (522.17±3.31mOsm/Kg, classical LDPE; 517.5 ±â€¯12.42 mOsm/Kg, innovative LDPE) (p = 0.022). Sterility was preserved. Degradation product areas increased slightly but remained below the limit of quantification. Impurity D was never detected. CONCLUSION: We have demonstrated that the ability of the innovative container Novelia® to maintain VED physicochemical and microbiological stability does not differ from that of amber glass and classical LDPE containers. Real life studies are required to find out if there is a potential difference between Novelia® and other containers in terms of sterility preservation.

Impact of multiaccess infusion devices on in vitro drug delivery during multi-infusion therapy.

BACKGROUND: Multiaccess infusion sets allow multiple simultaneous infusions but may induce interference in drug delivery resulting from large variations in the delivery rate of potent drugs. In this study, we sought to understand the influence of multiaccess infusion device properties (dead space volume and antireflux valve [ARV]) on drug delivery during multi-infusion therapy. METHODS: Infusion sets differing in length, dead space volume, and presence of an ARV were assessed. Three drugs were infused simultaneously through different access points, and their concentrations were obtained using UV spectrophotometric analysis of the effluent. Different infusion configurations were compared by assessing (1) the amount of drug delivered to the patient per unit of time, (2) the mean amount of drug delivered to the patient per unit of time during the steady-state infusion (mass flow rate plateau), and (3) flow change efficiency calculated from the ratio of the area under the experimental instant mass flow rate curve to the area corresponding to theoretical instant mass flow rate curve. RESULTS: Infusion sets with lower dead space volumes offered significantly higher flow change efficiency (53.0% +/- 15.4% with a dead space volume equal to 0.046 mL 5 min after the start of infusion) than infusion sets with higher dead space volume (5.6% +/- 8.2% with a dead space volume equal to 6.16 mL), whatever the flow rate changes. Even in case of large dead space volumes, the presence of an ARV significantly increased the mass flow rate plateau (from 92.4% to 99.3% of the theoretical plateau without and with the presence of an ARV, respectively). CONCLUSIONS: Multi-infusion therapy induces perturbation in drug delivery. These perturbations (lag time, backflow, and bolus) could be reduced by using infusion sets including very low dead space volume and an ARV.

Clinical implications of intravenous drug incompatibilities in critically ill patients.

OBJECTIVE: The aim of this review is to analyse the clinical consequences of intravenous drug incompatibilities in critically ill patients, especially the incidence of organ dysfunctions and mortality. METHODS: A review of literature was conducted according to the PRISMA statement in June 2017, using Medline, ISI Web of Science and Clinicaltrials.gov. DATA EXTRACTION: Eligible studies were case reports and randomised controlled trials (RCTs) that assessed the effects of drug incompatibilities in critically ill patients on morbidity or mortality as primary or secondary outcomes, or adverse events. Two investigators independently reviewed the eligibility of the study from abstracts or manuscript data. DATA SYNTHESIS: Twelve articles met the selection criteria. The six articles reporting RCTs concern only four RCTs. RCTs were single-centre studies comparing infusion with or without filter. One of them included adult patients. The others included paediatric and neonatal intensive care unit patients. Primary endpoints were SIRS, organ failure, overall complication rate, bacteraemia, sepsis, phlebitis and length of stay. The results are mixed with one RCT reporting a reduction in SIRS, organ failure and overall complication rate, two studies in disagreement over the occurrence of sepsis and one study reporting no impact on length of hospital stay. The six articles on case reports show different drug incompatibility situations. They report pulmonary toxicity. CONCLUSION: Little data is available on this topic. Infused particles may induce organ failure, in particular pulmonary toxicity and SIRS. Further studies are needed to establish a link between the level of exposure to drug incompatibilities and clinical implication.