COVID-19 and household water insecurities in vulnerable communities in the Mekong Region.

Access to sufficient clean water is important for reducing the risks from COVID-19. It is unclear, however, what influence COVID-19 has had on water insecurities. The objective of this study was to assess the associations between COVID-19 control measures and household water insecurities. A survey of 1559 individuals living in vulnerable communities in five countries (Cambodia, Laos, Myanmar, Thailand, Vietnam) showed that increased needs for clean water to wash hands or facemasks made it more likely a person was water insecure along those dimensions. Water insecurities with respect to handwashing and drinking, in turn, made adoption of the corresponding good practices less likely, whereas in the case of washing facemasks there was no association. Water system infrastructure, environmental conditions such as floods and droughts, as well as gender norms and knowledge, were also important for water insecurities and the adoption of good practices. As domestic water insecurities and COVID-19 control measures are associated with each other, efforts should therefore be directed at identifying and assisting the water insecure at high risk when COVID-19 reaches their communities. Supplementary Information: The online version contains supplementary material available at 10.1007/s10668-022-02182-0.

Stakeholder Perspectives on COVID-19 and Household Water Access in Vulnerable Communities in the Mekong Region.

The COVID-19 pandemic has underlined the importance of safe access to sufficient clean water in vulnerable communities, renewing interest in water, sanitation and hygiene (WASH) programs and related targets under Sustainable Development Goal 6 (SDG 6). The purpose of this study was to better understand the obstacles to water access in vulnerable communities and identify ways they might be addressed in five countries in the Mekong Region (Cambodia, Laos, Myanmar, Thailand, Vietnam). To this end, qualitative interviews with 50 government officials and development or health experts were complimented with a quantitative survey of the experiences and views of individuals in 15 vulnerable communities. There were several key findings. First, difficulties in accessing sufficient clean water for drinking and hygiene persist in certain vulnerable communities, including informal urban settlements, remote minority villages, and migrant worker camps. Second, limited rights, high prices, and remote locations were common obstacles to household access to improved water sources. Third, seasonal differences in the availability of clean water, alongside other disruptions to supply such as restrictions on movement in COVID-19 responses, drove households towards lower quality sources. Fourth, there are multiple threats to water quality from source to consumption that should be addressed by monitoring, treatment, and watershed protection. Fifth, stakeholder groups differ from each other and residents of vulnerable communities regarding the significance of water access, supply and quality difficulties, and how they should be addressed. The paper ends with a set of program suggestions addressing these water-related difficulties.

Explaining Intentions by Vietnamese Schoolchildren to Adopt Pro-Environmental Behaviors in Response to Climate Change Using Theories of Persuasive Communication.

Climate change adaptation capacity remains low among vulnerable communities in developing countries such as Vietnam. Vector-borne diseases as dengue fever are increasing as a result of changing weather patterns. This study aims to examine the impact of key psychological variables in the Theory of Reasoned Action, the Theory of Planned Behavior, an Extended Parallel Process Model and the Social Cognitive Theory on the intention of schoolchildren to engage in climate change adaptation behavior-in this study, practices which would help reduce the risks of contracting dengue fever. It also seeks to identify the most salient predictors of the behavioral intention across these theories. Data were obtained from 796 Vietnamese schoolchildren who completed questionnaires measuring constructs of the four theories. Multivariate data analysis demonstrated that self-efficacy and severity appeared to be significant and consistent predictors of the individual's intention to reduce dengue fever. The results provide practical suggestions for the use of the theorical constructs tested in climate change communication campaigns in Vietnam and insights generally on pro-environmental behavior change.

Crafting usable knowledge for sustainable development.

This paper distills core lessons about how researchers (scientists, engineers, planners, etc.) interested in promoting sustainable development can increase the likelihood of producing usable knowledge. We draw the lessons from both practical experience in diverse contexts around the world and from scholarly advances in understanding the relationships between science and society. Many of these lessons will be familiar to those with experience in crafting knowledge to support action for sustainable development. However, few are included in the formal training of researchers. As a result, when scientists and engineers first venture out of the laboratory or library with the goal of linking their knowledge with action, the outcome has often been ineffectiveness and disillusionment. We therefore articulate here a core set of lessons that we believe should become part of the basic training for researchers interested in crafting usable knowledge for sustainable development. These lessons entail at least four things researchers should know, and four things they should do. The knowing lessons involve understanding the coproduction relationships through which knowledge making and decision making shape one another in social-environmental systems. We highlight the lessons that emerge from examining those coproduction relationships through the ICAP lens, viewing them from the perspectives of Innovation systems, Complex systems, Adaptive systems, and Political systems. The doing lessons involve improving the capacity of the research community to put its understanding of coproduction into practice. We highlight steps through which researchers can help build capacities for stakeholder collaboration, social learning, knowledge governance, and researcher training.

Knowledge and innovation relationships in the shrimp industry in Thailand and Mexico.

Experts, government officials, and industry leaders concerned about the sustainability of shrimp aquaculture believe they know what farmers need to know and should be doing. They have framed sustainability as a technical problem that, at the farm level, is to be solved by better shrimp and management of ponds and businesses. Codes of conduct, standards, and regulations are expected to bring deviant practices into line. Shrimp farmers are often cornered in a challenging game of knowledge in which their livelihoods are at stake. In the commodity chain there are multiple relations with both suppliers and buyers, not all of which are trustworthy. The social networks shrimp farmers belong to are crucial for sifting out misinformation and multiplying insights from personal experience in learning by doing. Successful farmers become part of a learning culture through seminars, workshops, and clubs in which knowledge and practices are continually re-evaluated. The combination of vertical and horizontal relationships creates a set of alternative arenas that together are critical to bridging knowledge and action gaps for shrimp farmers. Government and industry initiatives for improving links between knowledge and practice for sustainability have largely succeeded when incentives are aligned: shrimp grow better in healthy environments, and using fewer resources means higher profits.

Linking knowledge with action in the pursuit of sustainable water-resources management.

Managing water for sustainable use and economic development is both a technical and a governance challenge in which knowledge production and sharing play a central role. This article evaluates and compares the role of participatory governance and scientific information in decision-making in four basins in Brazil, Mexico, Thailand, and the United States. Water management institutions in each of the basins have evolved during the last 10-20 years from a relatively centralized water-management structure at the state or national level to a decision structure that involves engaging water users within the basins and the development of participatory processes. This change is consistent with global trends in which states increasingly are expected to gain public acceptance for larger water projects and policy changes. In each case, expanded citizen engagement in identifying options and in decision-making processes has resulted in more complexity but also has expanded the culture of integrated learning. International funding for water infrastructure has been linked to requirements for participatory management processes, but, ironically, this study finds that participatory processes appear to work better in the context of decisions that are short-term and easily adjusted, such as water-allocation decisions, and do not work so well for longer-term, high-stakes decisions regarding infrastructure. A second important observation is that the costs of capacity building to allow meaningful stakeholder engagement in water-management decision processes are not widely recognized. Failure to appreciate the associated costs and complexities may contribute to the lack of successful engagement of citizens in decisions regarding infrastructure.

Water Use by Inland Aquaculture in Thailand: Stakeholder Perceptions, Scientific Evidence, and Public Policy.

This paper assesses the significance of stakeholder discourses on uses of water by aquaculture for public policy. Our discourse analysis focuses on the experiences with inland aquaculture in Thailand, drawing from interviews with stakeholders, and evidence in public documents such as newspapers and television news reports. A key finding is that fish farms suffer significant losses from polluted run-off entering water bodies where fish are grown. Mass mortality events in river cage culture, in particular, attract media attention and are the core of the aquaculture-as-victim discourse. Fish farms are also adversely impacted by river management and current water allocation policies. Inland shrimp farming has received more negative media and scientific attention than fish farming, and is the focus of the aquaculture-as-villain discourse. A third, aquaculture-as-benign discourse, is used widely to describe fish pond culture, and more rarely to promote aquaculture in low-quality water bodies or as part of integrated nutrient and waste re-use farming systems. The findings strongly imply that aquaculture farmers should be included as a stakeholder in the management of watersheds and rivers, as well as the negotiation and allocation of water resources. They also suggest a need for aquaculture development policies to pay closer attention to water quality and allocation issues.

Impacts, Perceptions and Management of Climate-Related Risks to Cage Aquaculture in the Reservoirs of Northern Thailand.

Weather is suspected to influence fish growth and survival, and be a factor in mass mortality events in cage aquaculture in reservoirs. The purpose of this study was to identify the important climate-related risks faced by cage aquaculture farms; evaluate how these risks were currently being managed; and explore how farmers might adapt to the effects of climate change. Fish farmers were interviewed across the northern region of Thailand to get information on impacts, perceptions and practices. Drought or low water levels, heat waves, cold spells and periods with dense cloud cover, each caused significant financial losses. Perceptions of climate-related risks were consistent with experienced impacts. Risks are primarily managed in the short-term with techniques like aeration and reducing feed. In the mid-term farmers adjust stocking calendars, take financial measures and seek new information. Farmers also emphasize the importance of maintaining good relations with other stakeholders and reservoir management. Larger farms placed greater importance on risk management than small farms, even though types and levels of risk perceived were very similar. Most fish farms were managed by men alone, or men and women working together. Gender differences in risk perception were not detected, but women judged a few risk management practices as more important than men. Fish farmers perceived that climate is changing, but their perceptions were not strongly associated with recently having suffered impacts from extreme weather. The findings of this study provide important inputs to improving risk management under current and future climate.

Planning for Production of Freshwater Fish Fry in a Variable Climate in Northern Thailand.

Provision of adequate numbers of quality fish fry is often a key constraint on aquaculture development. The management of climate-related risks in hatchery and nursery management operations has not received much attention, but is likely to be a key element of successful adaptation to climate change in the aquaculture sector. This study explored the sensitivities and vulnerability of freshwater fish fry production in 15 government hatcheries across Northern Thailand to climate variability and evaluated the robustness of the proposed adaptation measures. This study found that hatcheries have to consider several factors when planning production, including: taking into account farmer demand; production capacity of the hatchery; availability of water resources; local climate and other area factors; and, individual species requirements. Nile tilapia is the most commonly cultured species of freshwater fish. Most fry production is done in the wet season, as cold spells and drought conditions disrupt hatchery production and reduce fish farm demand in the dry season. In the wet season, some hatcheries are impacted by floods. Using a set of scenarios to capture major uncertainties and variability in climate, this study suggests a couple of strategies that should help make hatchery operations more climate change resilient, in particular: improving hatchery operations and management to deal better with risks under current climate variability; improving monitoring and information systems so that emerging climate-related risks are known sooner and understood better; and, research and development on alternative species, breeding programs, improving water management and other features of hatchery operations.

Shan Migrant Sex Workers Living with HIV Who Remain Active in Sexual Entertainment Venues in Chiang Mai, Thailand.

Migrant female sex workers (MFSW) are at a high and increasing risk of HIV infection and may also be a source of transmission. In Northern Thailand, most MSFW are Shan ethnic nationals from Myanmar. This study aims to understand how the risks of HIV infection and transmission are perceived and acted upon by Shan MFSW living with HIV who remain active in sex work. The paper employs a narrative approach, offering insight into the lives of eight Shan MFSW living with HIV in Chiang Mai, Thailand. Their risk behaviors are examined, from when they first entered sex work through to becoming HIV-positive and adopting antiretroviral treatment, as well as the reasons for continuing sex work. The findings reveal several ways in which stigmatized identities and life conditions influence risk perceptions and behaviors of Shan MFSW. Shan MFSW exemplify biopolitical vulnerability as female migrants, and sex workers in addition to living with HIV and the constraints of poverty, and limited education and skills. Understanding the complexities in their life conditions suggested several ways to improve care for them.

Deliberation and scale in Mekong region water governance.

Understanding the politics of deliberation, scales, and levels is crucial to understanding the social complexity of water-related governance. Deliberative processes might complement and inform more conventional representational and bureaucratic approaches to planning and decision-making. However, they are also subject to scale and level politics, which can confound institutionalized decision-making. Scale and level contests arise in dialogues and related arenas because different actors privilege particular temporal or spatial scales and levels in their analysis, arguments, and responses. Scale contests might include whether to privilege administrative, hydrological, ecosystem, or economic boundaries. Level contests might include whether to privilege the subdistrict or the province, the tributary watershed or the international river basin, a river or a biogeographic region, and the local or the regional economy. In the Mekong Region there is a recurrent demand for water resources development projects and major policies proposed by governments and investors to be scrutinized in public. Deliberative forms of engagement are potentially very helpful because they encourage supporters and critics to articulate assumptions and reasoning about the different opportunities and risks associated with alternative options, and in doing so, they often traverse and enable higher-quality conversations within and across scales and within and between levels. Six case studies from the Mekong Region are examined. We find evidence that scale and level politics affects the context, process, content, and outcomes of deliberative engagement in a region where public deliberation is still far from being a norm, particularly where there are sensitive and far-reaching choices to be made about water use and energy production.

Local irrigation management institutions mediate changes driven by external policy and market pressures in Nepal and Thailand.

This article assesses the role of local institutions in managing irrigation water use. Fifty irrigation systems in each country were studied in Nepal and Thailand to compare the influence of local institutions on performance of irrigation systems amid changes in external policy and market pressures. Nepal's new irrigation policy after the re-instatement of multiparty democracy in 1990 emphasized participatory irrigation management transferring the management responsibility from state authorities to water users. The water user associations of traditional farmer-managed irrigation systems were formally recognized by requiring registration with related state authorities. In Thailand also government policies encouraged people's participation in irrigation management. Today water users are directly involved in management of even some large irrigation systems at the level of tertiary canals. Traditional communal irrigation systems in northern Thailand received support for system infrastructure improvement but have faced increased interference from government. In Thailand market development supported diversification in farming practices resulting in increased areas under high water-demanding commercial crops in the dry season. In contrast, the command areas of most irrigation systems in Nepal include cereal-based subsistence farming with only one-third having commercial farming. Cropping intensities are higher in Nepal than in Thailand reflecting, in part, differences in availability of land and management. In both countries local institutions play an important role in maintaining the performance of irrigation systems as external drivers and local contexts change. Local institutions have provided alternative options for irrigation water use by mediating external pressures.

Multi-Material Direct Ink Writing (DIW) for Complex 3D Metallic Structures with Removable Supports.

Direct ink writing (DIW) combined with post-deposition thermal treatments is a safe, cheap, and accessible additive manufacturing (AM) method for the creation of metallic structures. Single-material DIW enables the creation of complex metallic 3D structures featuring overhangs, lengthy bridges, or enclosed hollows, but requires the printing supporting structures. However, the support printed from the same material becomes inseparable from the building structure after the thermal treatment. Here, a multi-material DIW method is developed to fabricate complex three-dimensional (3D) steel structures by creating a removable support printed from a lower melting temperature metal (i.e., copper) or a ceramic (i.e., alumina). The lower melting temperature metal completely infiltrates the porous steel structures for a hybrid configuration, while the ceramic offers a brittle support that can be easily removed. The influence of the support materials on the steel structure properties is investigated by characterizing the dimensional shrinkage, surface roughness, filament porosity, electrical conductivity, and tensile properties. The hybrid configuration (i.e., copper infiltrated steel structures) improves the electrical conductivity of the fabricated steel structure by 400% and the mechanical stiffness by 34%. The alumina support is physically and chemically stable during the thermal treatment, bringing no significant contamination to the steel structure.

Industrial transformation and shrimp aquaculture in Thailand and Vietnam: pathways to ecological, social, and economic sustainability?

Shrimp aquaculture in Vietnam is in the process of being transformed into a major industry around the intensification of the production system. The experiences of other countries in the region, especially in Thailand where high input production systems dominate, suggests that now is a critical time for intervention to redirect industry into pathways that are more sustainable ecologically, socially, and economically. In Thailand, years of experience with intensified systems and a complex industrial organization has not led to sustainable solutions. The challenge here is for society to regain control and then to redirect the transformation along more efficient and benign pathways. Our analyses suggest that current pathways in both countries are unlikely to lead to a sustainable industry. A complete transformation of the way shrimp are grown, fed, processed, distributed, and regulated is needed.

Manufacturing of three-dimensionally microstructured nanocomposites through microfluidic infiltration.

Microstructured composite beams reinforced with complex three-dimensionally (3D) patterned nanocomposite microfilaments are fabricated via nanocomposite infiltration of 3D interconnected microfluidic networks. The manufacturing of the reinforced beams begins with the fabrication of microfluidic networks, which involves layer-by-layer deposition of fugitive ink filaments using a dispensing robot, filling the empty space between filaments using a low viscosity resin, curing the resin and finally removing the ink. Self-supported 3D structures with other geometries and many layers (e.g. a few hundreds layers) could be built using this method. The resulting tubular microfluidic networks are then infiltrated with thermosetting nanocomposite suspensions containing nanofillers (e.g. single-walled carbon nanotubes), and subsequently cured. The infiltration is done by applying a pressure gradient between two ends of the empty network (either by applying a vacuum or vacuum-assisted microinjection). Prior to the infiltration, the nanocomposite suspensions are prepared by dispersing nanofillers into polymer matrices using ultrasonication and three-roll mixing methods. The nanocomposites (i.e. materials infiltrated) are then solidified under UV exposure/heat cure, resulting in a 3D-reinforced composite structure. The technique presented here enables the design of functional nanocomposite macroscopic products for microengineering applications such as actuators and sensors.