Phase Transition of Cubic Ice to Hexagonal Ice during Growth and Decomposition.

Ice, one of the most enigmatic materials on Earth, exhibits diverse polymorphism, with research mainly focusing on the most commonly observed phases: hexagonal ice (Ih), cubic ice (Ic), and stacking-disordered ice (Isd). While their formation or structural changes are crucial for advancements in cloud science, climate modeling, and cryogenic technology, the molecular mechanisms driving these phenomena remain unexplored. Herein, utilizing cryogenic transmission electron microscopy, we investigate the formation of ice at two different temperatures, demonstrating a size-dependent phase shift from Ic to Isd. Furthermore, a relatively metastable cubic phase in Isd transitions to a hexagonal phase under electron beam radiation. This transition, facilitated by crystal defects, contrasts with perfect crystalline Ic, which maintains its original phase, emphasizing the importance of defects in polymorphic phase transitions. Our findings provide novel insights on phase control during the ice growth processes and polymorphic phase transitions from the cubic-to-hexagonal phases.

Stable Zinc Metal Battery Development: Using Fibrous Zirconia for Rapid Surface Conduction of Zinc Ions With Modified Water Solvation Structure.

The two most critical technical issues in Zn-based batteries, dendrite formation, and hydrogen evolution reaction, can be simultaneously addressed by introducing negatively charged fibrous ZrO2 as a separator. Electron redistribution between ZrO2 and Zn2+ ions renders the ZrO2 surface a preferred adsorption site for Zn2+ ions, making surface conduction the primary ion-transport mode. Surface conduction enables fibrous ZrO2 to exhibit a 6.54 times higher single-Zn-ion conductivity than that of conventional glass fiber, minimizing the concentration gradient of Zn2+ and suppressing dendrite formation. Additionally, strong Zr─O─Zn bonding stabilizes the Zn2+ ions with fewer solvated H2O molecules (≈2), preventing water molecules from approaching the electrode surface, as evidenced by a 58.8% decrease in the hydrogen evolution rate. Consequently, the cycling stability of a fibrous-ZrO2-based Zn/Zn symmetric cell (3000 h at 1 mAh cm-2 and 5 mA cm-2) is approximately ten times greater than that of the conventional variant. Furthermore, a fibrous-ZrO2-based Zn-I2 full cell exhibits a notably high energy density (271.4 Wh kg-1) as well as a long lifespan (≈5000 cycles) at an ultrahigh current density (4 A g-1).

Evolutionary balance between foldability and functionality of a glucose transporter.

Despite advances in resolving the structures of multi-pass membrane proteins, little is known about the native folding pathways of these complex structures. Using single-molecule magnetic tweezers, we here report a folding pathway of purified human glucose transporter 3 (GLUT3) reconstituted within synthetic lipid bilayers. The N-terminal major facilitator superfamily (MFS) fold strictly forms first, serving as a structural template for its C-terminal counterpart. We found polar residues comprising the conduit for glucose molecules present major folding challenges. The endoplasmic reticulum membrane protein complex facilitates insertion of these hydrophilic transmembrane helices, thrusting GLUT3's microstate sampling toward folded structures. Final assembly between the N- and C-terminal MFS folds depends on specific lipids that ease desolvation of the lipid shells surrounding the domain interfaces. Sequence analysis suggests that this asymmetric folding propensity across the N- and C-terminal MFS folds prevails for metazoan sugar porters, revealing evolutionary conflicts between foldability and functionality faced by many multi-pass membrane proteins.

Evaluating the Dermatological Benefits of Snowberry (Symphoricarpos albus): A Comparative Analysis of Extracts and Fermented Products from Different Plant Parts.

Skin ageing is influenced by both intrinsic and extrinsic factors, with excessive ultraviolet (UV) exposure being a significant contributor. Such exposure can lead to moisture loss, sagging, increased wrinkling, and decreased skin elasticity. Prolonged UV exposure negatively impacts the extracellular matrix by reducing collagen, hyaluronic acid, and aquaporin 3 (AQP-3) levels. Fermentation, which involves microorganisms, can produce and transform beneficial substances for human health. Natural product fermentation using lactic acid bacteria have demonstrated antioxidant, anti-inflammatory, antibacterial, whitening, and anti-wrinkle properties. Snowberry, traditionally used as an antiemetic, purgative, and anti-inflammatory agent, is now also used as an immune stimulant and for treating digestive disorders and colds. However, research on the skin benefits of Fermented Snowberry Extracts remains limited. Thus, we aimed to evaluate the skin benefits of snowberry by investigating its moisturising and anti-wrinkle effects, comparing extracts from different parts of the snowberry plant with those subjected to fermentation using Lactobacillus plantarum. Chlorophyll-free extracts were prepared from various parts of the snowberry plant, and ferments were created using Lactobacillus plantarum. The extracts and ferments were analysed using high-performance liquid chromatography (HPLC) to determine and compare their chemical compositions. Moisturising and anti-ageing tests were conducted to assess the efficacy of the extracts and ferments on the skin. The gallic acid content remained unchanged across all parts of the snowberry before and after fermentation. However, Fermented Snowberry Leaf Extracts exhibited a slight decrease in chlorogenic acid content but a significant increase in ferulic acid content. The Fermented Snowberry Fruit Extract demonstrated increased chlorogenic acid and a notable rise in ferulic acid compared to its non-fermented counterpart. Skin efficacy tests revealed that Fermented Snowberry Leaf and Fruit Extracts enhanced the expression of AQP-3, HAS-3, and COL1A1. These extracts exhibited distinct phenolic component profiles, indicating potential skin benefits such as improved moisture retention and protection against ageing. These findings suggest that Fermented Snowberry Extracts could be developed into effective skincare products, providing a natural alternative for enhancing skin hydration and reducing signs of ageing.

Chloroaluminate Anion Intercalation in Graphene and Graphite: From Two-Dimensional Devices to Aluminum-Ion Batteries.

A rechargeable aluminum-ion battery based on chloroaluminate electrolytes has received intense attention due to the high abundance and chemical stability of aluminum. However, the fundamental intercalation processes and dynamics in these battery systems remain unresolved. Here, the energetics and dynamics of chloroaluminate ion intercalation in atomically thin single crystal graphite are investigated by fabricating mesoscopic devices for charge transport and operando optical microscopy. These mesoscopic measurements are compared to the high-performance rechargeable Al-based battery consisting of a few-layer graphene-multiwall carbon nanotube composite cathode. These composites exhibit a 60% capacity enhancement over pyrolytic graphite, while an ∼3-fold improvement in overall ion diffusivity is also obtained exhibiting ∼1% of those in atomically thin single crystals. Our results thus establish the distinction between intrinsic and ensemble electrochemical behavior in Al-based batteries and show that engineering ion transport in these devices can yet lead to vast improvements in battery performance.

Simultaneous Real-Time Three-Dimensional Localization and FRET Measurement of Two Distinct Particles.

Many biological processes employ mechanisms involving the locations and interactions of multiple components. Given that most biological processes occur in three dimensions, the simultaneous measurement of three-dimensional locations and interactions is necessary. However, the simultaneous three-dimensional precise localization and measurement of interactions in real time remains challenging. Here, we report a new microscopy technique to localize two spectrally distinct particles in three dimensions with an accuracy (2.35σ) of tens of nanometers with an exposure time of 100 ms and to measure their real-time interactions using fluorescence resonance energy transfer (FRET) simultaneously. Using this microscope, we tracked two distinct vesicles containing t-SNAREs or v-SNARE in three dimensions and observed FRET simultaneously during single-vesicle fusion in real time, revealing the nanoscale motion and interactions of single vesicles in vesicle fusion. Thus, this study demonstrates that our microscope can provide detailed information about real-time three-dimensional nanoscale locations, motion, and interactions in biological processes.

Introduction of Bifunctionality into the Multidomain Architecture of the ω-Ester-Containing Peptide Plesiocin.

The modular biosynthetic pathway of ribosomally synthesized and post-translationally modified peptides (RiPPs) enhances their engineering potential for exploring new structures and biological functions. The ω-ester-containing peptides (OEPs), a subfamily of RiPPs, have distinct side-to-side ester or amide linkages and frequently present more than one macrocyclic domain in a "beads-on-a-string" structure. In an effort to improve the engineering potential of RiPPs, we present here the idea that the multidomain architecture of an OEP, plesiocin, can be exploited to create a bifunctional modified peptide. Characterization of plesiocin variants revealed that strong chymotrypsin inhibition relies on the bicyclic structure of the domain in which a leucine residue in the hairpin loop functions as a specificity determinant. Four domains of plesiocin promote simultaneous binding of multiple enzymes, where the C-terminal domain binds chymotrypsin most efficiently. Using this information, we successfully engineered a plesiocin variant in which two different domains inhibit chymotrypsin and trypsin. This result suggests that the multidomain architecture of OEPs is a useful platform for engineering multifunctional hybrid RiPPs.

Long-term Outcomes of Endoscopic Anti-reflux Surgery in Pediatric Patients with Vesicoureteral Reflux: Urinary Tract Infection, Renal Scarring, and Predictive Factors for Success.

BACKGROUND: To report the long-term outcomes of endoscopic surgery (ES) in pediatric patients with vesicoureteral reflux in terms of success rate, urinary tract infection, and renal function. METHODS: We retrospectively reviewed the records of 73 pediatric patients (110 ureters) who underwent ES for vesicoureteral reflux. Ultrasonography was performed 1, 3, and 12 months postoperatively. Voiding cystourethrography was performed 3 months postoperatively and repeated after 1 year if vesicoureteral reflux persisted. Success was defined as the absence of reflux at the first voiding cystourethrography. Renal scans were performed at least 12 months postoperatively. Renal function deterioration was defined as a new scar or a greater than 5% decrease in function. RESULTS: The median follow-up duration was 24 (12-118) months. The overall success was 65.6%, while it was 78.9%, 87.0%, 62.5%, 37.5%, 66.7% for grades I, II, III, IV, and V, respectively. In multivariate analyses, significant predictive factors for success were vesicoureteral reflux grade (odds ratio [OR], 0.28; P < 0.001) and mound detection at the first postoperative ultrasonography (OR, 13.53; P < 0.001). Renal function deterioration was found in 8 (15.3%) ureters and was less common in those with successful surgeries than in those with failures (9.5% vs. 40.0%; P = 0.035). No significant predictive factor for renal function deterioration or urinary tract infection was found. CONCLUSION: Successful short-term outcomes of ES are expected in low-grade vesicoureteral reflux, especially when a mound is detected by postoperative ultrasonography. However, unpredictable long-term renal deterioration warrants continued follow-up.

Few-layered metallic 1T-MoS2/TiO2 with exposed (001) facets: two-dimensional nanocomposites for enhanced photocatalytic activities.

Titanium dioxide (TiO2) with exposed (001) facets (TiO2(001)) has attractive photocatalytic properties. However, the high recombination rate of the photo-excited charge carriers on this surface often limits its application. Here, we report that a few-layered 1T-MoS2 coating on TiO2(001) nanosheets (abbreviated as MST) can be a promising candidate that overcomes some of the challenges of TiO2(001). Computational and experimental results demonstrate that MST as a photocatalyst exhibits a significantly low-charge recombination rate as well as excellent long-term durability. The synthesized MST 2D nanocomposites show a 31.9% increase in photocatalytic activity for hydrogen (H2) production relative to the counterpart TiO2(001). MST offers a new route for further improvement of the photocatalytic activity of TiO2 with exposed high energy facets.

Comparison of Renal Function between Robot-Assisted and Open Partial Nephrectomy as Determined by Tc 99m-DTPA Renal Scintigraphy.

We compared postoperative renal function impairment between patients undergoing robot-assisted partial nephrectomy (RAPN) and those undergoing open partial nephrectomy (OPN) by using Tc-99m diethylenetriaminepentaacetic acid (DTPA) renal scintigraphy. Patients who underwent partial nephrectomy by a single surgeon between 2007 and 2013 were eligible and were matched by propensity score, based on age, tumor size, exophytic properties of tumor, and location relative to the polar lines. Of the 403 patients who underwent partial nephrectomy, 114 (28%) underwent RAPN and 289 (72%) underwent OPN. Mean follow-up duration was 35.2 months. Following propensity matching, there were no significant differences between the two groups in tumor exophytic properties (P = 0.818) or nephrometry score (P = 0.527). Renal ischemic time (24.4 minutes vs. 17.8 minutes, P < 0.001) was significantly longer in the RAPN group than in the OPN group, while the other characteristics were similar. Multivariate analysis showed that greater preoperative renal unit function (P = 0.011) and nephrometry score (P = 0.041) were independently correlated with a reduction in glomerular filtration rate. The operative method did not correlate with renal function impairment (P = 0.704). Postoperative renal function impairment was similar between patients who underwent OPN and those who underwent RAPN, despite RAPN having a longer ischemic time.

Renal Function is Associated with Nephrometry Score After Partial Nephrectomy: A Study Using Diethylene Triamine Penta-Acetic Acid (DTPA) Renal Scanning.

PURPOSE: The aim of this study was to evaluate the effect of renal tumor anatomical characteristics on renal function change after partial nephrectomy using the scoring systems and the glomerular filtration rate (GFR) estimated from diethylene triamine penta-acetic acid (DTPA) scans. METHODS: Patients who underwent DTPA renal scans before and after partial nephrectomy from January 2009 to December 2011 were identified retrospectively. The anatomical characteristics of renal tumors were standardized using the RENAL, PADUA and C-index scoring systems. Associations between scoring systems and change in GFRs were evaluated using a correlation coefficient. Predictors of GFR change and postoperative new-onset chronic kidney disease (CKD) after partial nephrectomy were assessed. RESULTS: A total of 185 patients with a mean tumor size of 2.6 cm (median 2.3, range 0.5-10) were identified. Mean ischemia time was 21.5 min. The last DTPA renal scan was performed at a mean follow-up duration of 23.3 months after surgery, and the mean decrease in GFR was 8.1 ml/min. By multivariable analysis, preoperative GFR (ß = -039; p < 0.001), RENAL complexity score (ß = -5.32; p < 0.001), and C-index complexity (ß = -5.19; p < 0.001) were independent predictors of decreased GFR on DTPA. Of 175 patients in whom preoperative estimated GFR (eGFR) was > 60 ml/min/1.73 m(2), CKD developed in 14 (8 %) patients after surgery. Independent factors predicting new-onset CKD were preoperative eGFR (odds ratio [OR] 0.91; p = 0.047), age (OR 1.13; p = 0.003), and diabetes (OR 5.10; p = 0.038). CONCLUSIONS: Although each scoring system describing the complexity of renal tumors correlates with change in GFR after partial nephrectomy, RENAL and C-index score were significantly predictive of GFR reduction.

Anti-Inflammatory Activity of Vacuum Distillate from Panax ginseng Root on LPS-Induced RAW264.7 Cells.

Panax ginseng has been widely applied as an important herb in traditional medicine to treat numerous human disorders. However, the inflammatory regulation effect of P. ginseng distillate (GSD) has not yet been fully assessed. To determine whether GSD can ameliorate inflammatory processes, a GSD was prepared using the vacuum distillation process for the first time, and the regulation effect on lipopolysaccharide-induced macrophages was assessed. The results showed that GSD effectively inhibited nitric oxide (NO) formation and activation of inducible nitric oxide synthase (iNOS) mRNA in murine macrophage cell, but not cyclooxygenase-2 production. The mRNA expression pattern of tumor necrosis factor alpha and IL-6 were also reduced by GSD. Furthermore, we confirmed that GSD exerted its anti-inflammatory effects by downregulating c-Jun NH2-terminal kinase (JNK) phosphorylation, the extracellular signal-regulated kinase phosphorylation, and signaling pathway of nuclear factor kappa B (NF-κB). Our findings revealed that the inflammatory regulation activity of GSD could be induced by iNOS and NO formation inhibition mediated by regulation of nuclear factor kappa B and p38/JNK MAPK pathways.

SNPs in microRNA seed region and impact of miR-375 in concurrent regulation of multiple lipid accumulation-related genes.

Bovine intramuscular fat (IMF), commonly referred to as marbling, is regulated by lipid metabolism, which includes adipogenesis, lipogenesis, glycerolipid synthesis, and lipolysis. In recent years, breeding researchers have identified single nucleotide polymorphisms (SNPs) as useful marker-assisted selection tools for improving marbling scores in national breeding programs. These included causal SNPs that induce phenotypic variation. MicroRNAs (miRNAs) are small highly conserved non-coding RNA molecules that bind to multiple non-coding regions. They are involved in post-transcriptional regulation. Multiple miRNAs may regulate a given target. Previously, three SNPs in the GPAM 3' UTR and four miRNAs were identified through in silico assays. The aim of this study is to verify the binding ability of the four miRNAs to the SNPs within the 3'UTR of GPAM, and to identify the regulatory function of miR-375 in the expression of genes related to lipid metabolism in mammalian adipocytes. It was verified that the four miRNAs bind to the GPAM 3'UTR, and identified that the miR-375 sequence is highly conserved. Furthermore, it was founded that miR-375 upregulated the GPAM gene, C/EBPα, PPARγ and lipid metabolism-related genes and promoted lipid droplet accumulation in 3T3-L1 cells. In conclusion, these results suggest that miR-375 is a multifunctional regulator of multiple lipid metabolism-related genes and may aid in obesity research as a biomarker.

Lowering the Temperature of Solid Oxide Electrochemical Cells Using Triple-Doped Bismuth Oxides.

Despite the great potential of solid oxide electrochemical cells (SOCs) as highly efficient energy conversion devices, the undesirable high operating temperature limits their wider applicability. Herein, a novel approach to developing high-performance low-temperature SOCs (LT-SOCs) is presented through the use of an Er, Y, and Zr triple-doped bismuth oxide (EYZB). This study demonstrates that EYZB exhibits > 147 times higher ionic conductivity of 0.44 S cm-1 at 600 °C compared to commercial Y-stabilized zirconia electrolyte with excellent stability over 1000 h. By rationally incorporating EYZB in composite electrodes and bilayer electrolytes, the zirconia-based electrolyte LT-SOC achieves the unprecedentedly high performance of 3.45 and 2.02 W cm-2 in the fuel cell mode and 2.08 and 0.95 A cm-2 in the electrolysis cell mode at 700 °C and 600 °C, respectively. Further, a distinctive microstructural feature of EYZB that largely extends triple phase boundary at the interface is revealed through digital twinning. This work provides insights for developing high-performance LT-SOCs.

Exocyst stimulates multiple steps of exocytic SNARE complex assembly and vesicle fusion.

Exocyst is a large multisubunit tethering complex essential for targeting and fusion of secretory vesicles in eukaryotic cells. Although the assembled exocyst complex has been proposed to tether vesicles to the plasma membrane and activate soluble N-ethylmaleimide-sensitive factor attachment protein receptors (SNAREs) for membrane fusion, the key biochemical steps that exocyst stimulates in SNARE-mediated fusion are undetermined. Here we use a combination of single-molecule and bulk fluorescence assays to investigate the roles of purified octameric yeast exocyst complexes in a reconstituted yeast exocytic SNARE assembly and vesicle fusion system. Exocyst had stimulatory roles in multiple distinct steps ranging from SNARE protein activation to binary and ternary complex assembly. Importantly, exocyst had a downstream role in driving membrane fusion and full content mixing of vesicle lumens. Our data suggest that exocyst provides extensive chaperoning functions across the entire process of SNARE complex assembly and fusion, thereby governing exocytosis at multiple steps.

Interface Engineering via Ti3C2Tx MXene Enabled Highly Efficient Bifunctional NiCoP Array Catalysts for Alkaline Water Splitting.

Developing a non-noble metal-based bifunctional electrocatalyst with high efficiency and stability for overall water splitting is desirable for renewable energy systems. We developed a novel method to fabricate a heterostructured electrocatalyst, comprising a NiCoP nanoneedle array grown on Ti3C2Tx MXene-coated Ni foam (NCP-MX/NF) using a dip-coating hydrothermal method, followed by phosphorization. Due to the abundance of active sites, enhanced electronic kinetics, and sufficient electrolyte accessibility resulting from the synergistic effects of NCP and MXene, NCP-MX/NF bifunctional alkaline catalysts afford superb electrocatalytic performance, with a low overpotential (72 mV at 10 mA cm-2 for HER and 303 mV at 50 mA cm-2 for OER), a low Tafel slope (49.2 mV dec-1 for HER and 69.5 mV dec-1 for OER), and long-term stability. Moreover, the overall water splitting performance of NCP-MX/NF, which requires potentials as low as 1.54 and 1.76 V at a current density of 10 and 50 mA cm-2, respectively, exceeded the performance of the Pt/C∥IrO2 couple in terms of overall water splitting. Density functional theory (DFT) calculations for the NCP/Ti3C2O2 interface model predicted the catalytic contribution to interfacial formation by analyzing the electronic redistribution at the interface. This contribution was also evaluated by calculating the adsorption energetics of the descriptor molecules (H2O and the H and OER intermediates).

Empowering Tri-Functional Palladium's Catalytic Activity and Durability in Electrocatalytic Formic Acid Oxidation Reaction via Innovative Self-Caging and Alloying Strategies.

Direct formic acid fuel cells (DFAFCs) stand out for portable electronic devices owing to their ease of handling, abundant fuel availability, and high theoretical open circuit potential. However, the practical application of DFAFCs is hindered by the unsatisfactory performance of electrocatalysts for the sluggish anodic formic acid oxidation reaction (FAOR). Palladium (Pd) based nanomaterials have shown promise for FAOR due to their highly selective reaction mechanism, but maintaining high electrocatalytic durability remains challenging. In this study, a novel Pd-based electrocatalyst (UiO-Pd-E) is reported with exceptional durability and activity for FAOR, which can be attributed to the Pd nanoparticles encapsulated within a carbon framework where concurrent chemical alloying of Pd and Zr occurs. Further, the UiO-Pd-E demonstrates noteworthy multifunctionality in various electrochemical reactions including electrocatalytic ethanol oxidation reaction (EOR) and oxygen reduction reaction (ORR) in addition to the FAOR, highlighting its practical potentials.

Impact of Side Chains in 1-n-Alkylimidazolium Ionomers on Cu-Catalyzed Electrochemical CO2 Reduction.

This study presents the impact of the side chains in 1-n-alkylimidazolium ionomers with varying side chain lengths (CnH2n+1 where n = 1, 4, 10, 16) on Cu-catalyzed electrochemical CO2 reduction reaction (CO2RR). Longer side chains suppress the H2 and CH4 formation, with the n-hexadecyl ionomer (n = 16) showing the greatest reduction in kinetics by up to 56.5% and 60.0%, respectively. On the other hand, C2H4 production demonstrates optimal Faradaic efficiency with the n-decyl ionomer (n = 10), a substantial increase of 59.9% compared to its methyl analog (n = 1). Through a combination of density functional theory calculations and material characterization, it is revealed that the engineering of the side chains effectively modulates the thermodynamic stability of key intermediates, thus influencing the selectivity of both CO2RR and hydrogen evolution reaction. Moreover, ionomer engineering enables industrially relevant partial current density of -209.5 mA cm-2 and a Faradaic efficiency of 52.4% for C2H4 production at 3.95 V, even with a moderately active Cu catalyst, outperforming previous benchmarks and allowing for further improvement through catalyst engineering. This study underscores the critical role of ionomers in CO2RR, providing insights into their optimal design for sustainable chemical synthesis.

Layer-Controlled Growth of Single-Crystalline 2D Bi2O2Se Film Driven by Interfacial Reconstruction.

As semiconductor scaling continues to reach sub-nanometer levels, two-dimensional (2D) semiconductors are emerging as a promising candidate for the post-silicon material. Among these alternatives, Bi2O2Se has risen as an exceptionally promising 2D semiconductor thanks to its excellent electrical properties, attributed to its appropriate bandgap and small effective mass. However, unlike other 2D materials, growth of large-scale Bi2O2Se films with precise layer control is still challenging due to its large surface energy caused by relatively strong interlayer electrostatic interactions. Here, we present the successful growth of a wafer-scale (∼3 cm) Bi2O2Se film with precise thickness control down to the monolayer level on TiO2-terminated SrTiO3 using metal-organic chemical vapor deposition (MOCVD). Scanning transmission electron microscopy (STEM) analysis confirmed the formation of a [BiTiO4]1- interfacial structure, and density functional theory (DFT) calculations revealed that the formation of [BiTiO4]1- significantly reduced the interfacial energy between Bi2O2Se and SrTiO3, thereby promoting 2D growth. Additionally, spectral responsivity measurements of two-terminal devices confirmed a bandgap increase of up to 1.9 eV in monolayer Bi2O2Se, which is consistent with our DFT calculations. Finally, we demonstrated high-performance Bi2O2Se field-effect transistor (FET) arrays, exhibiting an excellent average electron mobility of 56.29 cm2/(V·s). This process is anticipated to enable wafer-scale applications of 2D Bi2O2Se and facilitate exploration of intriguing physical phenomena in confined 2D systems.

Nonvolatile memory devices prepared from sol-gel derived niobium pentoxide films.

We report on the resistive switching nonvolatile memory (RSNM) properties of niobium pentoxide (Nb(2)O(5)) films prepared using sol-gel chemistry. A sol-gel derived solution of niobium ethoxide, a precursor to Nb(2)O(5), was spin-coated on to a platinum (Pt)-coated silicon substrate, and was then annealed at approximately 620 and 450 °C to form a Nb(2)O(5) film of polycrystalline and amorphous structure, respectively. A top electrode consisting of Ag, W, Au, or Pt was then coated onto the Nb(2)O(5) films to complete the fabrication. After a forming process of limited current compliance up to 10 mA, known as "electroforming", a resistive switching phenomenon, independent of voltage polarity (unipolar switching), was observed at low operating voltages (0.59 ± 0.05 V(RESET) and 1.03 ± 0.06 V(SET)) with a high ON/OFF current ratio above 10(8). The reported approach offers opportunities for preparing Nb(2)O(5)-based resistive switching memory devices from solution process.