Development of Fluorescent Bacteria with Lux and Riboflavin Genes.

Lumazine protein from marine luminescent bacteria of Photobacterium species bind with very high affinity to the fluorescent chromophore 6,7-dimethyl-8-ribitylumazine. The light emission of bacterial luminescent systems is used as a sensitive, rapid, and safe assay for an ever-increasing number of biological systems. Plasmid pRFN4, containing the genes encoding riboflavin from the rib operon of Bacillus subtilis, was designed for the overproduction of lumazine. To construct fluorescent bacteria for use as microbial sensors, novel recombinant plasmids (pRFN4-Pp N-lumP and pRFN4-Pp luxLP N-lumP) were constructed by amplifying the DNA encoding the N-lumP gene (luxL) from P. phosphoreum and the promoter region (luxLP) present upstream of the lux operon of the gene by PCR and ligating into the pRFN4-Pp N-lumP plasmid. A new recombinant plasmid, pRFN4-Pp luxLP-N-lumP, was constructed with the expectation that the fluorescence intensity would be further increased when transformed into Escherichia coli. When this plasmid was transformed into E. coli 43R, the fluorescence intensity of transformants was 500 times greater than that of E. coli alone. As a result, the recombinant plasmid in which the gene encoding N-LumP and DNA containing the lux promoter exhibited expression that was so high as to show fluorescence in single E. coli cells. The fluorescent bacterial systems developed in the present study using lux and riboflavin genes can be utilized in the future as biosensors with high sensitivity and rapid analysis times.

Color balanced transparent luminescent solar concentrator based on a polydimethylsiloxane polymer waveguide with coexisting polar and non-polar fluorescent dyes.

Color balance is a critical concept in the application of functional transparent polymers from a customer's standpoint. In this study, multiple polar and non-polar fluorescent dyes are embedded simultaneously for the first time in a polydimethylsiloxane (PDMS) polymer matrix. Five dyes successfully coexist with the optimum blending ratio. Furthermore, simultaneous dispersing of polar and non-polar dyes in the polymer is achieved. Absorption and photoluminescence characteristics of multiple fluorescent dyes in PDMS medium are systemically deconvoluted and discussed. The competitive average visible transmittance and color balance of synthesized multi-fluorescent dye embedded PDMS is demonstrated by high color rendering index and CIE color space coordinates close to the white point. Additionally, the luminescent solar concentrator device demonstrates improved power conversion efficiency and light utilization efficiency than the pure PDMS waveguide-based device. Moreover, the long-term storage stability is demonstrated successfully. The findings, therefore, demonstrate the applicability of multi-fluorescent dye embedded PDMS to advanced transparent devices.

Generation of Fluorescent Bacteria with the Genes Coding for Lumazine Protein and Riboflavin Biosynthesis.

Lumazine protein is a member of the riboflavin synthase superfamily and the intense fluorescence is caused by non-covalently bound to 6,7-dimethyl 8-ribityllumazine. The pRFN4 plasmid, which contains the riboflavin synthesis genes from Bacillus subtilis, was originally designed for overproduction of the fluorescent ligand of 6,7-dimethyl 8-ribityllumazine. To provide the basis for a biosensor based on the lux gene from bioluminescent bacteria of Photobacterium leiognathi, the gene coding for N-terminal domain half of the lumazine protein extending to amino acid 112 (N-LumP) and the gene for whole lumazine protein (W-LumP) from P. leiognathi were introduced by polymerase chain reaction (PCR) and ligated into pRFN4 vector, to construct the recombinant plasmids of N-lumP-pRFN4 and W-lumP-pRFN4 as well as their modified plasmids by insertion of the lux promoter. The expression of the genes in the recombinant plasmids was checked in various Escherichia coli strains, and the fluorescence intensity in Escherichia coli 43R can even be observed in a single cell. These results concerning the co-expression of the genes coding for lumazine protein and for riboflavin synthesis raise the possibility to generate fluorescent bacteria which can be used in the field of bio-imaging.

Hippocampal activation of 5-HT1B receptors and BDNF production by vagus nerve stimulation in rats under chronic restraint stress.

A growing body of evidence shows that the electrical stimulation of the vagus nerve can improve mental illness including depression. Here, we investigated whether the vagus nerve stimulation (VNS) is involved in regulating the responsiveness of hippocampal neurons in rats under chronic restraint stress (CRS). c-Fos protein signals were detected 2 hr after VNS in 5-HT1A receptor-positive neurons in the dorsal raphe nucleus (DRN) as well as in the nucleus tractus solitarius (NTS). Chronic VNS was performed on a daily basis for 2 weeks using an implanted microelectrode in rats that had undergone CRS for 2 weeks. We found that the levels of both 5-HT1B receptors and phospho-Erk1/2 were decreased in parallel in the hippocampal neurons of CRS animals and then increased to the baseline levels by chronic VNS. Hippocampal induction of 5-HT1B receptors and phospho-Erk1/2 by VNS was diminished after the injection of 5,7-dihydroxytryptamine (5,7-DHT), a neurotoxin of serotonergic neurons, into the DRN. Hippocampal production of brain-derived neurotrophic factor (BDNF) was also upregulated by VNS, but the treatment of 5,7-DHT abrogated the effects of VNS on BDNF induction. VNS in CRS animals improved the behavioral scores in forced swimming test (FST) compared to sham-stimulated control. Our results suggest that VNS-mediated serotonergic input via 5-HT1B receptors into the hippocampal neurons may activate BDNF pathway and improve depressive-like behaviors in CRS animals.

Improving FAPbBr3 Perovskite Crystal Quality via Additive Engineering for High Voltage Solar Cell over 1.5 V.

Lead bromide-based perovskites are promising materials as the top cells of tandem solar cells and for application in various fields requiring high voltages owing to their wide band gaps and excellent environmental resistances. However, several factors, such as the formation of bulk and surface defects, impede the performances of corresponding devices, thereby limiting the efficiencies of these devices as single-junction devices. To reduce the number of defect sites, urea is added to the formamidinium lead bromide (FAPbBr3) perovskite material to increase its grain size. Nevertheless, urea undesirably reacts with lead(II) bromide (PbBr2) in the perovskite structure, creating unfavorable impurities in the device. To solve this problem, herein, in addition to urea, we introduced formamidinium chloride (FACl) into FAPbBr3. Owing to the synergistic effect of urea and FACl, the FAPbBr3 film quality effectively improved due to suppression of the generation of impurities and stabilization of film crystallinity. Consequently, the FAPbBr3 single-junction solar cell constructed using FACl and urea as additives demonstrated a power conversion efficiency of 9.6% and an open-circuit voltage of 1.516 V with negligible hysteresis. This study provides new insights into the use of additive engineering for overcoming the energy losses caused by defects in perovskite films.

Phase Stability Improvement of a γ-CsPbI3 Perovskite Solar Cell Utilizing a Barium Bis(trifluoromethanesulfonimide) Solution.

The cesium lead iodide (CsPbI3) perovskite solar cell possesses a wide band gap ranging from 1.65 to 1.75 eV, which is suitable for integration into a tandem structure along with a low-band-gap silicon solar cell. Moreover, CsPbI3 has received considerable attention as a potential solution for the prevalent issues of low thermal stability of organic-inorganic perovskite solar cells and phase segregation encountered in conventional mixed halide wide-band-gap perovskite solar cells. Through the implementation of volatile additives, CsPbI3 has demonstrated substantial advancements in efficiency, process temperature, and stability. This study introduces a novel approach for barium (Ba)-doping by spraying an antisolvent containing barium bis(trifluoromethanesulfonimide) during the spin-coating process. By incorporating Ba2+ through this spraying technique, the formation of the delta phase in CsPbI3 is significantly suppressed; thereby, a power conversion efficiency of 18.56% is achieved, and a remarkable 93% of the initial efficiency is maintained after 600 h.

Detoxification of Bee Venom Increases Its Anti-inflammatory Activity and Decreases Its Cytotoxicity and Allergenic Activity.

Bee venom is a medicinal product that is widely used in traditional therapies owing to its excellent anti-inflammatory activity. However, the use of bee venom has shown adverse effects. Therefore, there is a need for research that can remove the cytotoxicity of bee venom and enhance its efficacy. In this study, we hydrolyzed melittin, the main component of bee venom, and removed the other components to eliminate the toxicity of bee venom. To compare the efficacy of bee venom and detoxified bee venom, we examined their antioxidant effects using 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging assay. In addition, cytotoxicity was confirmed in MCF 10A and RAW 264.7 cells, using 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium, inner salt (MTS) assay. Detoxified bee venom showed a strong antioxidant activity and decreased a cytotoxicity in MCF 10A and RAW 264.7 cells. The anti-inflammatory activity of detoxified bee venom and bee venom were assessed by comparison of the expression of inflammatory cytokine mRNA and phosphorylation of IκBα in RAW 264.7 cells. Degranulation in RBL-2H3 cells was analyzed through ß-hexosaminidase release assay to confirm the allergenic activity of bee venom and detoxified bee venom. Treatment of the detoxified bee venom inhibited inflammatory cytokine mRNA expression, IκBα phosphorylation, and ß-hexosaminidase release. Taken together, the results indicated that compared to bee venom, detoxified bee venom exhibited decreased cytotoxicity and allergenicity and increased anti-inflammatory activity. In conclusion, detoxification of bee venom efficiently decreases the adverse effects, making it suitable for medicinal applications.

Recent Progress in Interconnection Layer for Hybrid Photovoltaic Tandems.

Hybrid tandem solar cells offer the benefits of low cost and full solar spectrum utilization. Among the hybrid tandem structures explored to date, the most popular ones have four (simple stacking design) or two (terminal/tunneling layer addition design) terminal electrodes. Although the latter design is more cost-effective than the former, its widespread application is hindered by the difficulty of preparing an interface between two solar cell materials. The oldest approach to the in-series bonding of two or more bandgap solar cells relies on the introduction of a tunneling layer in multijunction III-V solar cells, but it has some limitations, e.g., the related materials/technologies are applicable only to III-V and certain other solar cells. Thus, alternative methods of realizing junction contacts based on the use of novel materials are highly sought after. Here, the strategies used to realize high-performance tandem cells are described, focusing on interface control in terms of bonding two or more solar cells for tandem approaches. The presented information is expected to aid the establishment of ideal methods of connecting two or more solar cells to obtain the highest performance for different solar cell choices with minimized energy loss through the interface.

Self-Aggregation-Controlled Rapid Chemical Bath Deposition of SnO2 Layers and Stable Dark Depolarization Process for Highly Efficient Planar Perovskite Solar Cells.

Planar perovskite solar cells (PSCs) incorporating n-type SnO2 have attracted significant interest because of their excellent photovoltaic performance. However, the film fabrication of SnO2 is limited by self-aggregation and inhomogeneous growth of the intermediate phase, which produces poor morphology and properties. In this study, a self-controlled SnO2 layer is fabricated directly on a fluorine-doped tin oxide (FTO) surface through simple and rapid chemical bath deposition. The PSCs based on this hydrolyzed SnO2 layer exhibit an excellent power conversion efficiency of 20.21 % with negligible hysteresis. Analysis of the electrochemical impedance spectroscopy on the charge transport dynamics indicates that the bias voltage influences both interfacial charge transportation and the ionic double layer under illumination. The hydrolyzed SnO2 -based PSCs demonstrate a faster ionic charge response time of 2.5 ms in comparison with 100.5 ms for the hydrolyzed TiO2 -based hysteretic PSCs. The results of quasi-steady-state carrier transportation indicate that a dynamic hysteresis in the J-V curves can be explained by complex ionic-electronic kinetics owing to the slow ionic charge redistribution and hole accumulation caused by electrode polarization, which causes an increase in charge recombination. This study reveals that SnO2 -based PSCs lead to a stabilized dark depolarization process compared with TiO2 -based PSCs, which is relevant to the charge transport dynamics in the high-performing planar SnO2 -based PSCs.

Inhibitory effect of dalbergioidin isolated from the trunk of Lespedeza cyrtobotrya on melanin biosynthesis.

Tyrosinase is a key enzyme for melanin biosynthesis, and hyperpigmentation disorders are associated with abnormal accumulation of melanin pigments, which can be reduced by treatment with depigmenting agents. The methanol extract of Lespedeza cyrtobotrya MIQ showed inhibitory activity against mushroom tyrosinase. The active compound was purified from the methanol extract of L cyrtobotrya, followed by several chromatographic methods, and identified as dalbergioidin (DBG) by spectroscopic methods. The results showed that DBG exhibited tyrosinase inhibitory activity with an IC50 of 20 mM. The kinetic analysis tyrosinase inhibition revealed that DBG acted as noncompetitive inhibitor. In addition, DBG showed a melanin biosynthesis inhibition zone in the culture plate of Streptomyces bikiniensis that has commonly been used as an indicator organism. Furthermore, 27 mM DBG decreased more than 50% of melanin contents on the pigmentation using immortalized mouse melanocyte, melan-a cell.

Investigation of Hole-Transporting Poly(triarylamine) on Aggregation and Charge Transport for Hysteresisless Scalable Planar Perovskite Solar Cells.

Organometallic halide perovskite solar cells (PSCs) have unique photovoltaic properties for use in next-generation solar energy harvesting systems. The highest efficiency of PSCs reached 22.1% on a laboratory scale of <0.1 cm2 device area. Thus, scaling up is the next step toward commercialization, but the difficulty in controlling the quality of large-area perovskite thin films remains a fundamental challenge. It has also been frequently reported that the J- V hysteresis is intensified in PSCs with areas larger than 1 cm2. In this study, we have fabricated a large-area perovskite layer using PbICl films, providing an intrinsic porous layer and enhancing the uniformity of the perovskite layer at areas larger than 1 cm2. Furthermore, we have investigated the polymeric properties of the prevalent hole-transporting material poly(triarylamine) (PTAA) with its photovoltaic performance. Two types of PTAAs, poly[bis(4-phenyl)(2,4-dimethylphenyl)amine] and poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine], were compared. A series of PTAAs with different molecular weights ( Mw) and polydispersity indices were studied, as the molecular weight of the PTAA is a key factor in determining the electrical properties and photovoltaic performance of the system. The fabricated PSCs with an aperture area of 1 cm2 based on a high-molecular-weight PTAA achieved a power conversion efficiency of 16.47% with negligible hysteresis and excellent reproducibility.

Simultaneous analysis and exposure assessment of migrated bisphenol analogues, phenol, and p-tert-butylphenol from food contact materials.

A simple, rapid, and novel liquid chromatography tandem-mass spectrometry (LC-MS/MS) method was developed and validated to determine levels of eight bisphenol analogues (A, S, F, B, P, AF, AP, and Z), phenol, and p-tert-butylphenol migrated from food contact material (FCM) into food simulants. Method validation showed acceptable values in terms of linearity, precision, and accuracy. The limits of detection and quantification were 0.53-29.6 and 1.77-29.6 µg L-1, respectively. Water, 4% acetic acid, 50% ethanol, and n-heptane were employed as food simulants for the migration tests, and the proposed method was applied to 234 articles of 11 FCMs including polycarbonate, polyethersulfone, polypropylene, and polyethyleneterephthalate, obtained from domestic markets and manufacturers in Korea. Only phenol was found in the FCMs poly(cyclophexane-1,4-dimethylene terephthalate), polylactide, and thermoplastic polyurethane. Eight bisphenol analogues and p-tert-butyl phenol were not found in any samples. Using the obtained migration results, the estimated daily intake (EDI) of phenol was calculated. Exposure assessments were carried out to compare the EDI with the tolerable daily intake (TDI), showing a low percentage (0.18%) of the TDI reported. This is the first study to examine eight bisphenol analogues and two phenols simultaneously in FCMs using the LC-MS/MS.

Electrodeposition of SnO2 on FTO and its Application in Planar Heterojunction Perovskite Solar Cells as an Electron Transport Layer.

We report the performance of perovskite solar cells (PSCs) with an electron transport layer (ETL) consisting of a SnO2 thin film obtained by electrochemical deposition. The surface morphology and thickness of the electrodeposited SnO2 films were closely related to electrochemical process conditions, i.e., the applied voltage, bath temperature, and deposition time. We investigated the performance of PSCs based on the SnO2 films. Remarkably, the experimental factors that are closely associated with the photovoltaic performance were strongly affected by the SnO2 ETLs. Finally, to enhance the photovoltaic performance, the surfaces of the SnO2 films were modified slightly by TiCl4 hydrolysis. This process improves charge extraction and suppresses charge recombination.

Anti-Inflammatory Effects of Acupuncture Stimulation via the Vagus Nerve.

Although acupuncture therapy is widely used in traditional Asian medicine for the treatment of diverse internal organ disorders, its underlying biological mechanisms are largely unknown. Here, we investigated the functional involvement of acupuncture stimulation (AS) in the regulation of inflammatory responses. TNF-α production in mouse serum, which was induced by lipopolysaccharide (LPS) administration, was decreased by manual acupuncture (MAC) at the zusanli acupoint (stomach36, ST36). In the spleen, TNF-α mRNA and protein levels were also downregulated by MAC and were recovered by using a splenic neurectomy and a vagotomy. c-Fos, which was induced in the nucleus tractus solitarius (NTS) and dorsal motor nucleus of the vagus nerve (DMV) by LPS and electroacupuncture (EAC), was further increased by focal administration of the AMPA receptor blocker CNQX and the purinergic receptor antagonist PPADS. TNF-α levels in the spleen were decreased by CNQX and PPADS treatments, implying the involvement of inhibitory neuronal activity in the DVC. In unanesthetized animals, both MAC and EAC generated c-Fos induction in the DVC neurons. However, MAC, but not EAC, was effective in decreasing splenic TNF-α production. These results suggest that the therapeutic effects of acupuncture may be mediated through vagal modulation of inflammatory responses in internal organs.

Enzymes hydrolyzing structural components and ferrous ion cause rusty-root symptom on ginseng (Panax ginseng).

Microbial induction of rusty-root was proved in this study. The enzymes hydrolyzing plant structural materials, including pectinase, pectolyase, ligninase, and cellulase, caused the rusty-root in ginseng. Pectinase and pectolyase produced the highest rusty-color formation. Ferrous ion (Fe+++) caused the synergistic effect on rusty-root formation in ginseng when it was used with pectinase. The effect of ferric ion (Fe++) on rusty-root formation was slow, compared with Fe+++, probably due to gradual oxidation to Fe+++. Other metal ions including the ferric ion (Fe++) did not affect rusty-root formation. The endophytic bacteria Agrobacterium tumefaciens, Lysobacter gummosus, Pseudomonas veronii, Pseudomonas marginalis, Rhodococcus erythropolis, and Rhodococcus globerulus, and the rotten-root forming phytophathogenic fungus Cylindrocarpon destructans, caused rusty-root. The polyphenol formation (rusty color) was not significantly different between microorganisms. The rotten-root-forming C. destructans produced large quantities of external cellulase activity (about 2.3 U[micronM/min/mg protein]), which indicated the pathogenecity of the fungus, whereas the bacteria produced 0.1-0.7 U. The fungal external pectinase activities (0.05 U) and rusty-root formation activity were similar to those of the bacteria. In this report, we proved that microbial hydrolyzing enzymes caused rusty-root (Hue value 15 degrees) of ginseng, and ferrous ion worsened the symptom.

ERK1/2-mediated Schwann cell proliferation in the regenerating sciatic nerve by treadmill training.

Proliferation of Schwann cells in the injured peripheral nerve supports axonal regeneration, and physical training in experimental animals has been shown to promote nerve regeneration. Extracellular signal-regulated kinase 1/2 (ERK1/2) activity can mediate neuronal responses to lesion signals, but its role in non-neuronal cells in the injured area is largely unknown. Here we report that treadmill training (TMT) facilitates axonal regeneration via the upregulation of phospho-ERK1/2 protein levels in Schwann cells in the injured sciatic nerve. Low-intensity, but not high-intensity, TMT increased neurite outgrowth of dorsal root ganglion (DRG) sensory neurons and potentiated Schwann cell proliferation. TMT elevated levels of GAP-43 mRNA and protein, and phospho-ERK1/2 protein in the injured sciatic nerves. TMT also enhanced phospho-c-Jun protein levels in the injured nerve. In-vivo administration of the ERK1/2 inhibitor PD98059 eliminated phospho-c-Jun, suggesting ERK1/2 phosphorylation of the c-Jun protein. PD98059 treatment decreased levels of BrdU-labeled proliferating Schwann cells in the distal portion of the injured nerve, and delayed the axonal regrowth that was promoted by TMT. The present data suggest that increased ERK1/2 activity in Schwann cells may play an important role in TMT-mediated enhancement of axonal regeneration in the injured peripheral nerve.