RESUMEN
OBJECTIVE: The aim of this study was to evaluate retention efficacy by assessing retention stability and patient perspectives according to type of circumferential retainer: the wrap-around circumferential retainer (WCR) and customized clear retainer (CCR). MATERIALS AND METHODS: This cohort follow-up study involved 52 patients aged 18-62 who underwent fixed-appliance orthodontic treatment without extractions or orthognathic surgery. Following screening consenting participants were divided into WCR and CCR groups. All participants before follow-up received fixed retainers for the upper and lower anteriors and respective removable retainers within 2 weeks post-debond. Intraoral scans and lateral cephalograms were taken immediately after debonding (T0) and again 12 months later. Dentoalveolar changes in several measurements were compared to evaluate retention efficacy. Surveys were conducted at 1 month (T1) and 12 months (T2) post-debonding to assess changes in patient experiences. Outcome assessments were blinded. Paired T-tests and independent T-tests were used for intragroup and intergroup comparisons of dentoalveolar measurements, respectively. Survey responses were analysed using the Pearson Chi-Square test. RESULTS: The final assessment included 32 participants. Model analysis revealed no significant differences between the groups, except for maxillary intermolar width (p = .033). In the WCR group, the cephalometric analysis indicated a significant increase in the incisor mandibular plane angle (p = .002) and a decrease in the interincisal angle (p = .014), while changes in the CCR group were statistically non-significant. Patient attitude evaluation showed similar trends for wear time and overall satisfaction. However, a higher percentage of respondents in the WCR group reported irritation when wearing the retainers (p = .037) at T1 and discomfort related to speech (p = .038) at T2. CONCLUSIONS: CCR showed better retention efficacy in terms of lower incisor inclination. Patients experienced relatively less irritation and speech discomfort with CCRs.
RESUMEN
BACKGROUND: Forced eruption of an impacted tooth usually requires surgical and orthodontic interventions to successfully bring the tooth into the dental arch. The clinical time required for a forced eruption is difficult to predict before treatment begins and success rates are affected by several factors before and after an eruption. This study was conducted to identify factors that affect the success of forced eruption, the duration of orthodontic treatment of impacted teeth, and the reasons for re-operation and forced eruption failure in a various teeth and cases. METHODS: In this retrospective study, the records regarding the forced eruption of 468 teeth in 371 patients from June 2006 to May 2020 at the Advanced General Dentistry Department of Yonsei University Dental Hospital were initially examined. The records of 214 teeth in 178 patients who completed orthodontic treatment were included in the analysis. Data on patient demographics, tooth characteristics, orthodontic treatment duration, re-operations, and failures were collected from electronic medical records. RESULTS: There was a significant difference in age between the success and failure forced eruption. Factors significantly affecting treatment duration were apex formation, position, rotation, and re-operation. Re-operation had a 96% success rate. The average orthodontic treatment duration was 29.99 ± 16.93 months, but the average orthodontic treatment duration for teeth that undergone re-operation was 20.36 ± 11.05 months, which was approximately 9 months shorter. Additionally, there was an interaction effect between rotation and re-operation on the duration of orthodontic treatment. The causes for failure of forced eruption in 6 cases were ankyloses (3 cases), incomplete alignment with the normal dental arch (2 cases), and a significant deviation in the impacted tooth's location (1 case). CONCLUSIONS: To increase the success rate of forced eruption, age should be considered as a priority, and in order to predict the treatment period, the apex formation status, position in the arch, and rotation should be considered in addition to age. When determining re-operation, considering factors such as ankylosis, root curvature, and apex formation can help in the success of orthodontic treatment.
Asunto(s)
Anquilosis del Diente , Diente Impactado , Diente no Erupcionado , Humanos , Diente Impactado/cirugía , Extrusión Ortodóncica , Estudios Retrospectivos , Diente no Erupcionado/terapia , Erupción DentalRESUMEN
INTRODUCTION: Microbiome from a "healthy cohort" is used as a reference for comparison to cases and intervention. However, the studies with cohort-based clinical research have not sufficiently accounted for the multistability in oral microbial community. The screening is limited to phenotypic features with marked variations in microbial genomic markers. Herein, we aimed to assess the stability of the oral microbiome across time from an intervention-free "healthy" cohort. METHODS: We obtained 33 supragingival samples of 11 healthy participants from the biobank. For each participant, we processed one sample as baseline (T0) and two samples spaced at 1-month (T1) and 3-month (T2) intervals for 16S ribosomal RNA gene sequencing analysis. RESULTS: We observed that taxonomic profiling had a similar pattern of dominant genera, namely, Rothia, Prevotella, and Hemophilus, at all time points. Shannon diversity revealed a significant increase from T0 (p < .05). Bray Curtis dissimilarity was significant (R = -.02, p < .01) within the cohort at each time point. Community stability had negative correlation to synchrony (r = -.739; p = .009) and variance (r = -.605; p = .048) of the species. Clustering revealed marked differences in the grouping patterns between the three time points. For all time points, the clusters presented a substantially dissimilar set of differentially abundant taxonomic and functional biomarkers. CONCLUSION: Our observations indicate towards the presence of multistable states within the oral microbiome in an intervention-free healthy cohort. For a conclusive and meaningful long-term reference, dental clinical research should account for multistability in the personalized therapy approach to improve the identification and classification of reliable markers.
Asunto(s)
Microbiota , Micrococcaceae , Humanos , ARN Ribosómico 16S/genética , Microbiota/genética , Estudios de Cohortes , Biomarcadores , Micrococcaceae/genéticaRESUMEN
OBJECTIVES: To evaluate changes in masticatory performance (MP) during the retention period after extraction and non-extraction treatment and compare it with MP in individuals with normal occlusion. MATERIALS AND METHODS: Adult patients who had completed orthodontic fixed appliance treatment comprised the extraction and non-extraction treatment groups, and those with normal occlusion comprised the control group. Their mixing ability (MA), maximum bite force (MBF), and occlusal contact area (OCA) were recorded immediately after the fixed appliance was removed and at 1 month, 6 months, and 1 year post-treatment. The MA was measured via the two-color chewing gum MA test using ViewGum software, and the MBF and OCA were measured using Dental Prescale II system. RESULTS: MA immediately after orthodontic treatment was lower than that in the normal group but showed a time-dependent gradual increase during a 1-year retention period (P < 0.01). The MA at 1 month post-treatment was not significantly different between the three groups (P > 0.05). The MA revealed a significant correlation with the MBF and OCA (P < 0.01). CONCLUSIONS: The MP immediately after orthodontic treatment was lower than that in the normal group but increased gradually, with levels comparable to those of the normal occlusion group at 1 month post-treatment. Further, extraction did not affect the recovery of the MP after orthodontic treatment. CLINICAL RELEVANCE: No other study has evaluated the changes in MP during the retention period after orthodontic treatment. The findings show that compared with MBF and OCA, the patients' MP improved faster to levels found in normal occlusion.
Asunto(s)
Fuerza de la Mordida , Atención Odontológica , Adulto , Humanos , Diente Premolar , Programas Informáticos , Goma de Mascar , MasticaciónRESUMEN
INTRODUCTION: The objective of this study was to evaluate and compare the 3-dimensional (3D) aging changes of the lips among adult skeletal Class I, II, and III malocclusion. METHODS: Female adult orthodontic patients aged 20-50 years with pretreatment cone-beam computed tomography scans were retrospectively classified according to age (20s [20-29 years], 30s [30-39 years], and 40s [40-49 years]) and then subclassified by malocclusion into skeletal Class I, II, and III relationship (9 groups; n = 30 per group). Positional differences in midsagittal and parasagittal soft-tissue landmarks and 3D morphologic aging changes of the lips were evaluated using cone-beam computed tomography scans. RESULTS: Labiale superius and cheilion for patients in their 40s indicated a significant downward and backward position compared with those in their 20s, regardless of skeletal classifications (P <0.05). Accordingly, the upper lip height decreased, and the mouth width increased significantly (P <0.05). For Class III malocclusion, the upper lip vermilion angle was greater for patients in their 40s than those in their 20s (P <0.05), whereas the lower lip vermilion angle was only lower for patients with Class II malocclusion (P <0.05). CONCLUSIONS: Middle-aged adult females (40-49 years) had a lower upper lip height and greater mouth width than those in their 20s, regardless of skeletal malocclusion. However, prominent morphologic aging changes of the lips were noted on the upper lip for skeletal Class III malocclusion and the lower lip for skeletal Class II malocclusion, implying that the underlying skeletal features (or malocclusion) may influence 3D aging changes of the lips.
Asunto(s)
Maloclusión de Angle Clase III , Maloclusión Clase II de Angle , Maloclusión , Humanos , Adulto , Femenino , Persona de Mediana Edad , Labio/diagnóstico por imagen , Labio/anatomía & histología , Cara/anatomía & histología , Estudios Retrospectivos , Maloclusión de Angle Clase III/diagnóstico por imagen , Cefalometría/métodosRESUMEN
BACKGROUND: The purpose of this study is to evaluate stability of vertical dimension following total arch intrusion using miniscrews by measuring the change during treatment and relapse amount after more than one year of retention. METHODS: Thirty patients (6 men, 24 women) were included in this study. Lateral cephalographs were taken with conventional radiography at the start of treatment (T0), after treatment (T1), and at least one year after treatment (T2). The evaluation was performed by measuring changes of selected parameters during treatment and the extent of relapse after more than one year. RESULTS: During total arch intrusion treatment (T1-T0), anterior and posterior teeth intruded significantly. The mean vertical distance between the maxillary posterior teeth and palatal plane was reduced by 2.30 mm (P < 0.001). The mean vertical distance between the maxillary anterior teeth and palatal plane was reduced by 2.04 mm (P < 0.001). The anterior facial height was also reduced by 2.70 mm (P < 0.001). During retention period (T2-T1), the vertical distance between the maxillary anterior teeth and the palatal plane significantly increased by 0.92 mm (P < 0.001). The anterior facial height increased by 0.81 mm (P < 0.01). CONCLUSIONS: Anterior facial height significantly decreases after treatment. During retention period, relapse of AFH and maxillary anterior teeth observed. There was no correlation between initial amount of AFH, mandibular plane angle, or SNPog and posttreatment AFH relapse. However, there was a significant correlation between the amount of intrusion of anterior and posterior teeth achieved by the treatment and the extent of relapse.
Asunto(s)
Diente , Masculino , Humanos , Femenino , Dimensión Vertical , Maxilar/diagnóstico por imagen , Técnicas de Movimiento Dental/métodos , Cefalometría/métodos , RecurrenciaRESUMEN
OBJECTIVES: This study aimed to assess the success rate and the amount of suture separation after the miniscrew-assisted rapid palatal expansion (MARPE) procedure in relation to the chronological age and sex of the patients. MATERIALS AND METHODS: The periapical radiographs of 215 subjects (95 male; 120 female; range, 6-60 years) who had undergone MARPE treatment were retrospectively analyzed. The success of suture separation was determined and, in suture-separated subjects, the amount of suture separation was evaluated by suture separation ratio calculated from the periapical radiograph obtained after active expansion. Association tests were performed using linear-by-linear association, the Jonckheere-Terpstra test, Fisher's exact test, and the Mann-Whitney U test, and linear regression models were also developed. RESULTS: The success rate of suture separation was 61.05% in male, 94.17% in female, and 79.53% in both sexes. There was a statistically significant association between older age and suture nonseparation in male (p < 0.001), but not in female (p = 0.221). In suture-separated subjects, there was a statistically significant trend toward a low amount of suture separation with older age subgroups in both sexes (p < 0.001); however, there was no statistically significant difference in the amount of suture separation between male and female in all age subgroups. CONCLUSIONS: Older patients treated with MARPE, particularly in male, may have a reduced likelihood of both success in suture separation and sufficient basal bone expansion. CLINICAL RELEVANCE: This study demonstrates that clinicians should consider that the success rate of MARPE and the amount of suture separation may depend on chronological age and sex.
Asunto(s)
Maxilar , Técnica de Expansión Palatina , Femenino , Humanos , Masculino , Hueso Paladar , Estudios Retrospectivos , SuturasRESUMEN
INTRODUCTION: In this study, we aimed to evaluate and compare the bracket positioning accuracy of the indirect bonding (IDB) transfer tray fabricated in-clinic using the tray printing (TP) and marker-model printing methods (MP). METHODS: The TP group was further divided into 2 groups (single-tray printing [STP] and multiple-tray printing [MTP]) depending on the presence of a tray split created using the 3-dimensional (3D) software. Five duplicated plaster models were used for each of the 3 experimental groups, and a total of 180 artificial teeth, except the second molar, were evaluated in the experiment. The dental model was scanned using a model scanner (E3; 3Shape Dental Systems, Copenhagen, Denmark). Virtual brackets were placed on facial axis points, and the IDB trays were designed and fabricated using a 3D printer (VIDA; EnvisionTEC, Mich). The accuracy of bracket positioning was evaluated by comparing the planned bracket positions and the actual bracket positions using 3D analysis on inspection software. The main effects and first-order interaction effects were analyzed together by analysis for the analysis of variance. RESULTS: The mean distance and height errors were significantly lower in the STP group than those in the MP and MTP groups (P <0.05). The mean distance error was 0.06 mm in the STP group and 0.09 mm in the MP and MTP groups. The mean height error was 0.10 mm in the STP group and 0.15 mm and 0.18 mm in MP and MTP groups, respectively. However, no significant differences were observed in the angular errors among the 3 groups. CONCLUSIONS: The in-office-fabricated IDB system with computer-aided design and 3D printer is clinically applicable after considering the linear and angular errors. We recommend IDB trays fabricated using the STP method owing to the lower frequency of bracket positioning errors and ease of fabrication.
Asunto(s)
Recubrimiento Dental Adhesivo , Soportes Ortodóncicos , Diseño Asistido por Computadora , Recubrimiento Dental Adhesivo/métodos , Humanos , Modelos Dentales , Impresión TridimensionalRESUMEN
BACKGROUND: This prospective randomized clinical trial aimed to evaluate the immediate and short-term skeletal, dentoalveolar, and periodontal effects of rapid palatal expansion (RPE) and miniscrew-assisted RPE (MARPE) in adolescent and young adult patients. METHODS: This study followed a two-arm, parallel, randomized clinical trial design that recruited patients with transverse maxillary deficiency in a 1:1 allocation ratio. Forty patients (14 men and 26 women) requiring maxillary expansion were randomly allocated to the RPE (n = 20, age = 14.0 ± 4.5) or MARPE (n = 20, age = 14.1 ± 4.2) groups. The assignment was performed via computer-generated block randomization, with a block size of four. Upon identical (35 turns) amount of expansion, low-dose cone-beam computed tomography images were taken before treatment (T0), immediately after expansion (T1), and after a 3-month consolidation period (T2). The primary outcome of this study comprised the assessment of midpalatal suture separation. Secondary outcomes included, skeletal, dentoalveolar, and periodontal measurements, which were performed at each time point. RESULTS: The frequency of midpalatal suture separation was 90% (18/20) and 95% (19/20) for the RPE and MARPE groups, respectively. A greater increase in nasal width in the molar region (M-NW) and greater palatine foramen (GPF) was observed immediately after the expansion (T1-T0) and consolidation periods (T2-T0) in the MARPE group compared to the RPE group (P < 0.05). The MARPE and RPE groups showed similar dentoalveolar changes except for the maxillary width (PM-MW, M-MW). The MARPE group presented greater bilateral first premolar (PM-MW) and molar (M-MW) maxillary width in relation to the RPE group (P < 0.05). Through the expansion and consolidation periods (T2-T0), lesser buccal displacement of the anchor teeth was observed in the MARPE group (PM-BBPT, PM-PBPT, M-BBPT [mesial and distal roots], and M-PBPT)( P < 0.05). CONCLUSIONS: Midpalatal suture separation was observed in 90% and 95% of patients in the RPE and MARPE groups, respectively. Both RPE and MARPE groups exhibited significant triangular basal bone expansion and skeletal relapse during consolidation. Under identical amounts of expansion, the MARPE group showed lower decrease in the skeletal, dentoalveolar and periodontal variables after consolidation. The reinforcement of RPE with miniscrews contributes to the maintenance of the basal bone during consolidation period. Trial registration WHO Institutional Clinical Trials Registry Platform (IRB No. KCT0006871 / Registration date 27/12/2021).
Asunto(s)
Técnica de Expansión Palatina , Tomografía Computarizada de Haz Cónico Espiral , Adolescente , Niño , Tomografía Computarizada de Haz Cónico/métodos , Femenino , Humanos , Masculino , Maxilar/diagnóstico por imagen , Maxilar/cirugía , Recurrencia Local de Neoplasia , Hueso Paladar/diagnóstico por imagen , Estudios Prospectivos , Adulto JovenRESUMEN
Previously, in the case of malocclusion owing to skeletal discrepancy in adults, the amount of tooth movement was limited since there was no reliable skeletal anchorage device. The only way to treat this case was by repositioning the maxilla and mandible via orthognathic surgery, but most patients are reluctant to undergo surgery owing to the risk and expenses incurred. However, with the current introduction and use of miniscrews as temporary anchorage devices, the entire dental arch can be relocated to a target position without surgery, thus broadening the scope of non-surgical orthodontic treatment compared to the past. For a non-surgical approach to improve skeletal discrepancy, anteroposterior, vertical and transverse displacements of the dental arch are necessary. In this case, the localization of the centre of resistance of the whole arch must precede the appliance design with an appropriate biomechanical design. Especially, in the transverse dimension, the envelope of discrepancy is reportedly narrow, and the tooth movement must accompany the orthopaedic correction involving the midpalatal suture expansion. Recently, in adults with transverse maxillomandibular discrepancy, miniscrew-assisted rapid palatal expansion (MARPE) can be performed. Moreover, compared to surgically assisted rapid palatal expansion, MARPE reduces the cost to the patient and achieves clinically acceptable stable maxillary expansion. In this article, we will discuss the role of total arch movement and MARPE in widening the scope of non-surgical orthodontic treatment, despite the inherent limitations of miniscrews' mechanical aspects.
Asunto(s)
Métodos de Anclaje en Ortodoncia , Técnica de Expansión Palatina , Adulto , Humanos , Mandíbula , Maxilar , Diseño de Aparato Ortodóncico , Técnicas de Movimiento DentalRESUMEN
OBJECTIVES: This study investigated the association of changes in cementum protein-1 (CEMP-1), dentine phosphoprotein (DPP), and c-terminal cross-linked telopeptide of type I collagen (CTX-I) levels in human gingival crevicular fluid (GCF) under constant load with external root resorption volume and amount of tooth movement. MATERIALS AND METHODS: In total, 11 healthy adult patients (mean age, 23.5 years [range, 18.3-37.7]; four men and seven women) were enrolled. GCF samples were obtained from premolars at T0, T1 (1 day), T2 (1 week), T3 (2 weeks), T4 (4 weeks), and T5 (8 weeks) under constant 100-gm buccal tipping force. Opposite premolars were used as controls. Teeth were extracted at T5, followed by quantification of external root resorption volume and histological analysis. RESULTS: In the test group, T5/T0 ratios of CEMP-1 and DPP levels, differential CEMP-1 levels between T5 and T0, and differential DPP levels between T2 and T0 correlated positively with root resorption volume (r = 0.734, 0.730, 0.627, and 0.612, respectively, all p < 0.05). CEMP-1 levels at T0 and T3 correlated negatively with root resorption volume (r = -0.603 and -0.706; all p < 0.05). CTX-I levels at T5 correlated positively with the amount of tooth movement (r = 0.848, p < 0.01). CONCLUSIONS: Alterations in CEMP-1 and DPP levels in human GCF at specific timepoints during orthodontic treatment may be associated with different degrees of external root resorption. CLINICAL RELEVANCE: This study demonstrates that changes in the levels of tissue-specific biomarkers in GCF may facilitate early detection of external root resorption during orthodontic tooth movement.
Asunto(s)
Resorción Radicular , Adulto , Diente Premolar , Biomarcadores/análisis , Femenino , Líquido del Surco Gingival/química , Humanos , Masculino , Técnicas de Movimiento Dental , Adulto JovenRESUMEN
AIM: The positional accuracy of bracket placement planned through tooth setup vs actual placement was evaluated by means of conventional thermoplastic indirect bonding trays and customized 3D-printed indirect bonding trays. MATERIALS AND METHODS: A total of 280 bracket positions placed on the crowns of 10 dental plaster models were evaluated. The manual setup method and a thermoplastic indirect bonding tray were used for the manual group. For the CAD/CAM group, the bracket was positioned using a digital setup and a corresponding 3D-printed tray. The positional accuracy of the bracket placement on the duplicated gypsum model using the trays was evaluated by means of 3D software. Six errors of bracket position (height, depth, mesiodistal, torque, rotation, and tip errors), including linear and angular errors, were measured. Differences in variables were compared across subgroups using the independent t test or the Mann-Whitney U test. RESULTS: Only the height error differed significantly (P < 0.05) between groups (manual: 0.2 mm; CAD/CAM: 0.12 mm). For both incisors and molars, the manual group showed significantly greater height errors than the CAD/CAM group (P < 0.05). The analysis of variance of the position error to the whole bracket showed statistically significant differences between tooth positions, linear measurements, and angular measurements (P < 0.05). CONCLUSION: A 3D-printed indirect bonding tray showed accuracy similar to that of conventional methods for bracket placement, with slightly greater bracket height accuracy. Further studies should strive to improve accuracy in terms of tooth positions.
Asunto(s)
Recubrimiento Dental Adhesivo , Soportes Ortodóncicos , Diseño Asistido por Computadora , Humanos , Modelos Dentales , Impresión TridimensionalRESUMEN
OBJECTIVES: To investigate the effect of local injection of receptor activator of nuclear factor kappa B ligand (RANKL) on experimental tooth movement and subsequent alveolar bone remodelling in mice. MATERIALS AND METHODS: Sixty mice were randomised to receive daily local RANKL or phosphate-buffered saline injections in the buccal premaxillary bone for 14 of 21 days of incisor movement, followed by a 21-day retention period. Five mice from each group were euthanised on days 0, 3, 7, 14, 21 and 42, and specimens were prepared for haematoxylin and eosin, tartrate-resistant acid phosphatase and immunohistochemical staining. Five mice from each group were subjected to serial microcomputed tomography until day 42 for tooth movement and bone volume quantification. RESULTS: The experimental group showed significantly greater tooth movement and bone volume reduction on days 14 and 21; an increased osteoclast number on days 3, 7, 14 and 21; and no difference on day 42. Higher RANKL expression was observed on days 7 and 14, with remarkable alkaline phosphatase activity. No significant systemic changes were observed. CONCLUSION: Local RANKL injection leads to increased osteoclastic activity and facilitates tooth movement, followed by subsequent alveolar bone formation; this implies a reversible transitional acceleration of bone resorption.
Asunto(s)
Proceso Alveolar/fisiología , Remodelación Ósea/efectos de los fármacos , Ligando RANK/farmacología , Movilidad Dentaria/diagnóstico por imagen , Fosfatasa Alcalina/metabolismo , Proceso Alveolar/patología , Animales , Recuento de Células , Inyecciones , Masculino , Maxilar/patología , Ratones , Ratones Endogámicos ICR , Osteoblastos/metabolismo , Osteoclastos/patología , Ligamento Periodontal/metabolismo , Ligando RANK/metabolismo , Distribución Aleatoria , Estrés Mecánico , Movilidad Dentaria/patología , Microtomografía por Rayos XRESUMEN
INTRODUCTION: We sought the 3-dimensional (3D) zone of the center of resistance (ZCR) of mandibular posterior teeth groups (group 1: first molar; group 2: both molars; group 3: both molars and second premolar; group 4: both molars and both premolars) with the use of 3D finite element analysis. METHODS: 3D finite element models comprised the mandibular posterior teeth, periodontal ligament, and alveolar bone. In the symmetric bilateral model, a 100-g midline force was applied on a median sagittal plane at 0.1-mm intervals to determine the anteroposterior and vertical positions of the ZCR (where the applied force induced translation). The most reliable buccolingual position of the ZCR was then determined in the unilateral model. The combination of the anteroposterior, vertical, and buccolingual positions was defined as the ZCR. RESULTS: The ZCRs of groups 1-4 were, respectively, 0.48, 0.46, 0.50, and 0.53 of the mandibular first molar root length from the alveolar crest level and located slightly distobuccally at anteroposterior ratios of 2:3.0, 2:2.3, 2:2.4, and 2:2.5 to each sectional arch length and at buccolingual ratios of 2:1.5, 2:1.1, 2:1.6, and 2:2.4 to the first molar's buccolingual width. CONCLUSIONS: The ZCR can be a useful reference for 3D movement planning of mandibular posterior teeth or segments.
Asunto(s)
Imagenología Tridimensional/métodos , Mandíbula/anatomía & histología , Mandíbula/diagnóstico por imagen , Diente/anatomía & histología , Diente/diagnóstico por imagen , Proceso Alveolar/anatomía & histología , Proceso Alveolar/diagnóstico por imagen , Diente Premolar/anatomía & histología , Diente Premolar/diagnóstico por imagen , Arco Dental , Análisis de Elementos Finitos , Humanos , Modelos Dentales , Diente Molar/anatomía & histología , Diente Molar/diagnóstico por imagen , Ortodoncia Correctiva , Ligamento Periodontal/anatomía & histología , Ligamento Periodontal/diagnóstico por imagen , Técnicas de Movimiento DentalRESUMEN
INTRODUCTION: The purpose of this study was to analyze the morphologic features of skeletal units in the mandibles of patients with facial asymmetry and mandibular retrognathism using cone-beam computed tomography. METHODS: The subjects consisted of 50 adults with facial asymmetry and mandibular retrognathism, divided into the symmetry group (n = 25) and the asymmetry group (n = 25) according to the degree of menton deviation. Three-dimensional computed tomography scans were obtained with cone beam computed tomography. Landmarks were designated on the reconstructed 3-dimensional images. Linear and volumetric measurements were made on the mandibles. RESULTS: In the asymmetry group, the lengths of condylar, body, and coronoid units were shorter, and condylar width was narrower on the deviated side than on the nondeviated side (P <0.01). The lengths of angular and chin units were not significantly different between the deviated and nondeviated sides (P >0.05). Hemimandibular, ramal, and body volumes were less on the deviated side than on the nondeviated side (P <0.01). CONCLUSIONS: Condylar, body, and coronoid units contribute to mandibular asymmetry in patients with facial asymmetry and mandibular retrognathism.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Asimetría Facial/diagnóstico por imagen , Imagenología Tridimensional , Retrognatismo/diagnóstico por imagen , Adulto , Femenino , Humanos , Masculino , Adulto JovenRESUMEN
PURPOSE: Postoperative skeletal and dental changes were evaluated in patients with mandibular prognathism who underwent mandibular setback surgery using an intraoral vertical ramus osteotomy (IVRO) with and without presurgical orthodontic treatment. MATERIAL AND METHODS: This retrospective cohort study included consecutive patients with skeletal Class III malocclusions who underwent IVRO. Patients treated with pre-orthodontic orthognathic surgery (POGS) were compared with patients treated with conventional surgery (CS) with presurgical orthodontics (control) using lateral cephalograms (taken preoperatively, 7 days postoperatively, and 12 months postoperatively). Predictor (group and timing), outcome (cephalometric measurements over time), and other (ie, baseline characteristics) variables were evaluated to determine the differences in postoperative horizontal and vertical positional changes of the mandible, such as point B. Baseline demographics were similar between the groups (N = 37; CS group, n = 17; POGS group, n = 20). The data were analyzed with an independent t test, the Mann-Whitney U test, the Fisher exact t test, Pearson correlation analysis, and simple linear regression analysis. RESULTS: The mean setback of the mandible at point B was similar, but the mandible of the POGS group, particularly the distal segment, moved superiorly during the postoperative period in conjunction with the removal of premature occlusal contacts (P < .001). In the CS group, the mandible had significantly more backward movement 12 months after surgery compared with the POGS group (P < .01). In the POGS group, horizontal and vertical postsurgical changes were linearly correlated with the amount of setback and vertical movement of the mandible. CONCLUSIONS: Mandibular setback surgery using IVRO without presurgical orthodontics leads to considerably different postoperative skeletal and dental changes compared with conventional treatment, with more superior movement being observed at point B during the 1-year postoperative period.
Asunto(s)
Osteotomía Mandibular/métodos , Procedimientos Quirúrgicos Ortognáticos/métodos , Implantes Absorbibles , Adolescente , Adulto , Placas Óseas , Tornillos Óseos , Cefalometría/métodos , Estudios de Cohortes , Femenino , Estudios de Seguimiento , Humanos , Técnicas de Fijación de Maxilares , Masculino , Maloclusión de Angle Clase III/cirugía , Mandíbula/patología , Osteotomía Mandibular/instrumentación , Maxilar/patología , Procedimientos Quirúrgicos Ortognáticos/instrumentación , Osteotomía Le Fort/instrumentación , Osteotomía Le Fort/métodos , Prognatismo/cirugía , Estudios Retrospectivos , Técnicas de Movimiento Dental/métodos , Resultado del Tratamiento , Dimensión Vertical , Adulto JovenRESUMEN
INTRODUCTION: The aim of this study was to evaluate differences in the maxillary sinus floor levels between adults with an anterior open bite and those without. METHODS: This retrospective study included 30 subjects: 15 adults with an anterior open bite (mean age, 21.5 ± 4.3 years) and 15 control subjects with normal occlusion (mean age, 21.7 ± 3.1 years). Cone-beam computed tomography and lateral cephalograms were analyzed before treatment. RESULTS: The open-bite group exhibited a significantly greater maxillary posterior alveolar height (P <0.05). The craniocaudal heights of the maxillary sinus in the region between the first and second molars and between the second premolar and first molar were significantly greater in the open bite group (40.5 and 39.0 mm, respectively) than in the control group (36.7 and 34.7 mm, respectively; P <0.05 for both). The basal bone heights in the regions between the first and second molars, the second premolar and first molar, and the first and second premolars were significantly smaller in the open-bite group than in the control group (P <0.001 for all). CONCLUSIONS: Vertical pneumatization of the maxillary sinus floor in the region between the first and second molars and between the second premolar and first molar is greater in adults with an anterior open bite than in those without, whereas basal bone height in the maxillary posterior region is lower in the open-bite patients.
Asunto(s)
Seno Maxilar/patología , Mordida Abierta/patología , Adolescente , Adulto , Proceso Alveolar/diagnóstico por imagen , Proceso Alveolar/patología , Estudios de Casos y Controles , Tomografía Computarizada de Haz Cónico , Femenino , Humanos , Masculino , Seno Maxilar/diagnóstico por imagen , Mordida Abierta/dietoterapia , Estudios Retrospectivos , Adulto JovenRESUMEN
BACKGROUND: Botulinum toxin type A (BoNT-A) is widely used to improve the lower facial contour. OBJECTIVE: To determine the difference in the changes in the lower facial contour achieved with 1 and 2 sessions of BoNT-A injections using 3-dimensional (3D) laser scanning. MATERIALS AND METHODS: Twenty volunteers were randomly divided into 2 groups. Group I (n = 10) received a single injection, whereas Group II (n = 10) received 2 sessions of injections, the second being administered 4 months after the first. Each injection comprised of 25 U of BoNT-A and was administered to the masseter muscle bilaterally. Evaluation of the effect of BoNT-A injection was performed using 3D laser scan images obtained before the injection and 6 months thereafter in Group I, and before the first injection and 6 months thereafter in the Group II. RESULTS: The mean changes in the volume and thickness in Group I were -1,186 mm and -1.52 mm, respectively; the corresponding changes were -4,072 mm and -3.84 mm in Group II. The reductions were significantly greater in Group II than in Group I. CONCLUSION: The administration of a second BoNT-A injection is effective for better aesthetic results for the lower facial contour.
Asunto(s)
Toxinas Botulínicas Tipo A/administración & dosificación , Asimetría Facial/diagnóstico , Asimetría Facial/tratamiento farmacológico , Imagenología Tridimensional/métodos , Rayos Láser , Adulto , Femenino , Estudios de Seguimiento , Voluntarios Sanos , Humanos , Inyecciones Intramusculares , Masculino , Músculo Masetero , Persona de Mediana Edad , Fármacos Neuromusculares/administración & dosificación , Estudios Retrospectivos , Adulto JovenRESUMEN
An impacted mandibular first molar tends to cause serious bone defects of the adjacent teeth. When choosing between the 2 typical treatment options-extraction or orthodontic relocation of the impacted tooth-the decision should be based on assessment of the prognosis. A 22-year-old man with severe mesioangulation and impaction of the mandibular first molar and a related vertical bone defect on the distal side of the second premolar was treated with extraction of the second molar and orthodontic relocation of the first molar with a retromolar miniscrew. Comprehensive orthodontic treatment involving premolar extraction was conducted. Strategic extraction of the molar and adequate orthodontic movement helped to restore the bone structure on the affected side. This case report suggests the effectiveness of restoration of bone defects by using viable periodontal tissues around the impacted tooth for the longevity of the periodontium.
Asunto(s)
Proceso Alveolar/patología , Mandíbula/patología , Diente Molar/patología , Extrusión Ortodóncica/métodos , Diente Impactado/patología , Diente Premolar/diagnóstico por imagen , Diente Premolar/patología , Tornillos Óseos , Cefalometría/métodos , Humanos , Imagenología Tridimensional/métodos , Masculino , Mandíbula/diagnóstico por imagen , Diente Molar/diagnóstico por imagen , Métodos de Anclaje en Ortodoncia/instrumentación , Extrusión Ortodóncica/instrumentación , Osteogénesis/fisiología , Planificación de Atención al Paciente , Radiografía Panorámica/métodos , Tomografía Computarizada por Rayos X/métodos , Técnicas de Movimiento Dental/instrumentación , Técnicas de Movimiento Dental/métodos , Diente Impactado/diagnóstico por imagen , Adulto JovenRESUMEN
Understanding of the interaction between human MG63 osteoblast-like cells and surfaces is necessary in the field of tissue engineering and biomaterials. Various titanium surfaces are widely used as not only implant materials, but also as miniscrews in orthodontics. Our goal was to assess the proteomic response of MG63 osteoblast-like cells to different titanium surfaces. MG63 osteoblast-like cells were cultured on three different titanium surfaces: a smooth surface (S), a sandblasted with large grit and acid-etched surface (SLA), and a surface coated with a thin layer of hydroxyapatite (HA). Cells grown on the rougher surfaces (SLA and HA) exhibited downregulated cell proliferation and morphological changes. In the proteomic analysis, cells grown on the SLA surface showed upregulated expression of protocadherin-ß3 precursor, kinase insert domain receptor, fibroblast growth factor receptor-3, and insulin-like growth factor I, while the expression levels of cell adhesion kinase, collagen α-1(I) chain precursor, collagen type XI α2, and cadherin-11 were upregulated in cells grown on the HA surface. These proteins are known to be involved in osteoblast adhesion, growth, and differentiation. Thus, the surface properties of dental materials can influence the expression of proteins involved in osseointegration-related processes. Proteomic analysis may reveal changes in novel proteins that explain why osseointegration varies depending on surface properties.