Elastic-instability-enabled locomotion.

Locomotion of an organism interacting with an environment is the consequence of a symmetry-breaking action in space-time. Here we show a minimal instantiation of this principle using a thin circular sheet, actuated symmetrically by a pneumatic source, using pressure to change shape nonlinearly via a spontaneous buckling instability. This leads to a polarized, bilaterally symmetric cone that can walk on land and swim in water. In either mode of locomotion, the emergence of shape asymmetry in the sheet leads to an asymmetric interaction with the environment that generates movement--via anisotropic friction on land, and via directed inertial forces in water. Scaling laws for the speed of the sheet of the actuator as a function of its size, shape, and the frequency of actuation are consistent with our observations. The presence of easily controllable reversible modes of buckling deformation further allows for a change in the direction of locomotion in open arenas and the ability to squeeze through confined environments--both of which we demonstrate using simple experiments. Our simple approach of harnessing elastic instabilities in soft structures to drive locomotion enables the design of novel shape-changing robots and other bioinspired machines at multiple scales.

Surface Functionalization and Reversible Disassembly of DNA-Assembly Nanoparticles for Sensitive and Multiplexed Detection of DNA Targets Without Enzymatic and Catalytic Amplification.

Recently, DNA-assembly nanoparticles based on DNA-metal ion interactions are emerging as new building blocks for drug delivery and metal nanostructure synthesis. However, the surface modification of DNA-assembly nanoparticles using functional biomolecules that can identify specific targets has rarely been explored. In this study, we developed a new immobilization chemical strategy to efficiently functionalize the barcode DNA-assembly nanoparticles (bcDNA NPs) with thiolated probe DNA (pDNA) for synthesizing pDNA-functionalized bcDNA NPs (pDNA-bcDNA NPs). We used them as nanoprobes to successfully demonstrate the sensitive and selective detection of multiple DNA targets. Importantly, Au ions played an essential role as anchoring sites via their conjugation with both thiolated pDNA and bcDNA NPs. In addition, we could reversibly and rapidly disassemble the pDNA-bcDNA NPs into the initial bcDNA strands with a recovery rate of 91%; this process significantly amplified the signal by releasing a million bcDNA strands, which enabled DNA quantification from a single pDNA-bcDNA NP. The Au3+ concentration, pH, and surface passivation conditions were carefully investigated to maximize the pDNA loading to 8500 strands/bcDNA NP. The limit of detection was determined to be 221 fM, which is the most sensitive among the absorbance-based methods without polymerase chain reaction, hybridization chain reactions, catalytic hairpin assembly, and other reactions involving enzymes and catalysts. The reversible disassembly of DNA strands and Au ion-mediated conjugation chemistry could be extended for the detection of other types of targets, such as proteins, metal ions, and small molecules, using other organic functionalities that are or can be thiolated, including polypeptides, aptamers, and antibodies.

Engineered Human Antibody with Improved Endothelin Receptor Type A Binding Affinity, Developability, and Serum Persistence Exhibits Excellent Antitumor Potency.

Endothelin receptor A (ETA), a class A G protein-coupled receptor (GPCR), is a promising tumor-associated antigen due to its close association with the progression and metastasis of many types of cancer, such as colorectal, breast, lung, ovarian, and prostate cancer. However, only small-molecule drugs have been developed as ETA antagonists with anticancer effects. In a previous study, we identified an antibody (AG8) with highly selective binding to human ETA through screening of a human naïve immune antibody library. Although both in vitro and in vivo experiments indicated that the identified AG8 had anticancer effects, there is a need for improvement in biochemical and physicochemical properties such as the ETA binding affinity, thermostability, and productivity. In this study, we engineered the framework regions of AG8 and isolated an anti-ETA antibody (MJF1) exhibiting significantly improved thermostability and ETA binding affinity. Subsequently, our previously isolated PFc29, an Fc variant with an enhanced pH-dependent human FcRn binding profile, was introduced to MJF1, and the resulting Fc-engineered anti-ETA antibody (MJF1-PFc29) inhibited the proliferation of tumor cells comparably to MJF1 and showed a 4.2-fold increased serum half-life in human FcRn transgenic mice. Moreover, MJF1-PFc29 elicited higher tumor growth inhibition in colorectal cancer xenograft mice compared to MJF1. Our results demonstrate that the engineered human anti-ETA antibody MJF1-PFc29 has great therapeutic potential and high antitumor potency against various types of cancers including colorectal cancer.

Isolation and characterization of single domain antibodies from banded houndshark (Triakis scyllium) targeting SARS-CoV-2 spike RBD protein.

The COVID-19 pandemic has significantly impacted human health for three years. To mitigate the spread of SARS-CoV-2, the development of neutralizing antibodies has been accelerated, including the exploration of alternative antibody formats such as single-domain antibodies. In this study, we identified variable new antigen receptors (VNARs) specific for the receptor binding domain (RBD) of SARS-CoV-2 by immunizing a banded houndshark (Triakis scyllium) with recombinant wild-type RBD. Notably, the CoV2NAR-1 clone showed high binding affinities in the nanomolar range to various RBDs and demonstrated neutralizing activity against SARS-CoV-2 pseudoviruses. These results highlight the potential of the banded houndshark as an animal model for the development of VNAR-based therapeutics or diagnostics against future pandemics.

Enhanced Photosynthetic Pigment Production Using a Scaled-Up Continuously Circulated Bioreactor.

Microalgae have gained attention as a promising source of chlorophylls and carotenoids in various industries. However, scaling up of conventional bubble columns presents challenges related to cell sedimentation and the presence of non-photosynthetic cells due to non-circulating zones and decreased light accessibility, respectively. Therefore, this study aimed to evaluate the newly developed continuously circulated bioreactor ROSEMAX at both laboratory and pilot scales, compared to a conventional bubble column. There was no significant difference in the biomass production and photosynthetic pigment content of Tetraselmis sp. cultivated at the laboratory scale (p > 0.05). However, at the pilot scale, the biomass cultured in ROSEMAX showed significantly high biomass (1.69 ± 0.11 g/L, dry weight, DW), chlorophyll-a (14.60 ± 0.76 mg/g, DW), and total carotene (5.64 ± 0.81 mg/g, DW) concentrations compared to the conventional bubble column (1.17 ± 0.11 g/L, DW, 10.67 ± 0.72 mg/g, DW, 3.21 ± 0.56 mg/g, DW, respectively) (p ≤ 0.05). Flow cytometric analyses confirmed that the proportion of Tetraselmis sp. live cells in the culture medium of ROSEMAX was 32.90% higher than that in the conventional bubble column, with a photosynthetic efficiency 1.14 times higher. These results support suggestions to use ROSEMAX as a bioreactor for industrial-scale applications.

Ultraefficient Electrocatalytic Hydrogen Evolution from Strain-Engineered, Multilayer MoS2.

This paper reports an approach to repurpose low-cost, bulk multilayer MoS2 for development of ultraefficient hydrogen evolution reaction (HER) catalysts over large areas (>cm2). We create working electrodes for use in HER by dry transfer of MoS2 nano- and microflakes to gold thin films deposited on prestrained thermoplastic substrates. By relieving the prestrain at a macroscopic scale, a tunable level of tensile strain is developed in the MoS2 and consequently results in a local phase transition as a result of spontaneously formed surface wrinkles. Using electrochemical impedance spectroscopy, we verified that electrochemical activation of the strained MoS2 lowered the charge transfer resistance within the materials system, achieving HER activity comparable to platinum (Pt). Raman and X-ray photoelectron spectroscopy show that desulfurization in the multilayer MoS2 was promoted by the phase transition; the combined effect of desulfurization and the lower charge resistance induced superior HER performance.

Hydrogel-Based, Dynamically Tunable Plasmonic Metasurfaces with Nanoscale Resolution.

Flat metasurfaces with subwavelength meta-atoms can be designed to manipulate the electromagnetic parameters of incident light and enable unusual light-matter interactions. Although hydrogel-based metasurfaces have the potential to control optical properties dynamically in response to environmental conditions, the pattern resolution of these surfaces has been limited to microscale features or larger, limiting capabilities at the nanoscale, and precluding effective use in metamaterials. This paper reports a general approach to developing tunable plasmonic metasurfaces with hydrogel meta-atoms at the subwavelength scale. Periodic arrays of hydrogel nanodots with continuously tunable diameters are fabricated on silver substrates, resulting in humidity-responsive surface plasmon polaritons (SPPs) at the nanostructure-metal interfaces. The peaks of the SPPs are controlled reversibly by absorbing or releasing water within the hydrogel matrix, the matrix-generated plasmonic color rendering in the visible spectrum. This work demonstrates that metasurfaces designed with these spatially patterned nanodots of varying sizes benefit applications in anti-counterfeiting and generate multicolored displays with single-nanodot resolution. Furthermore, this work shows system versatility exhibited by broadband beam-steering on a phase modulator consisting of hydrogel supercell units in which the size variations of constituent hydrogel nanostructures engineer the wavefront of reflected light from the metasurface.

Spontaneous Formation of Ordered Magnetic Domains by Patterning Stress.

The formation of ordered magnetic domains in thin films is important for the magnetic microdevices in spin-electronics, magneto-optics, and magnetic microelectromechanical systems. Although inducing anisotropic stress in magnetostrictive materials can achieve the domain assembly, controlling magnetic anisotropy over microscale areas is challenging. In this work, we realized the microscopic patterning of magnetic domains by engineering stress distribution. Deposition of ferromagnetic thin films on nanotrenched polymeric layers induced tensile stress at the interfaces, giving rise to the directional magnetoelastic coupling to form ordered domains spontaneously. By changing the periodicity and shape of nanotrenches, we spatially tuned the geometric configuration of domains by design. Theoretical analysis and micromagnetic characterization confirmed that the local stress distribution by the topographic confinement dominates the forming mechanism of the directed magnetization.

A Natural CHI3L1-Targeting Compound, Ebractenoid F, Inhibits Lung Cancer Cell Growth and Migration and Induces Apoptosis by Blocking CHI3L1/AKT Signals.

Our previous big data analyses reported a strong association between CHI3L1 expression and lung tumor development. In this present study, we investigated whether a CHI3L1-inhibiting natural compound, ebractenoid F, inhibits lung cancer cell growth and migration and induces apoptosis. Ebractenoid F concentration-dependently (0, 17, 35, 70 µM) and significantly inhibited the proliferation and migration of A549 and H460 lung cancer cells and induced apoptosis. In the mechanism study, we found that ebractenoid F bound to CHI3L1 and suppressed CHI3L1-associated AKT signaling. Combined treatment with an AKT inhibitor, LY294002, and ebractenoid F synergistically decreased the expression of CHI3L1. Moreover, the combination treatment further inhibited the growth and migration of lung cancer cells and further induced apoptosis, as well as the expression levels of apoptosis-related proteins. Thus, our data demonstrate that ebractenoid F may serve as a potential anti-lung cancer compound targeting CHI3L1-associated AKT signaling.

Year-Round Cultivation of Tetraselmis sp. for Essential Lipid Production in a Semi-Open Raceway System.

There is increasing demand for essential fatty acids (EFAs) from non-fish sources such as microalgae, which are considered a renewable and sustainable biomass. The open raceway system (ORS) is an affordable system for microalgae biomass cultivation for industrial applications. However, seasonal variations in weather can affect biomass productivity and the quality of microalgal biomass. The aim of this study was to determine the feasibility of year-round Tetraselmis sp. cultivation in a semi-ORS in Korea for biomass and bioactive lipid production. To maximize biomass productivity of Tetraselmis sp., f medium was selected because it resulted in a significantly higher biomass productivity (1.64 ± 0.03 g/L) and lower omega-6/omega-3 ratio (0.52/1) under laboratory conditions than f/2 medium (0.70/1). Then, we used climatic data-based building information modeling technology to construct a pilot plant of six semi-ORSs for controlling culture conditions, each with a culture volume of 40,000 L. Over 1 year, there were no significant variations in monthly biomass productivity, fatty acid composition, or the omega-6/omega-3 ratio; however, the lipid content correlated significantly with photosynthetic photon flux density. During year-round cultivation from November 2014 to October 2017, areal productivity was gradually increased by increasing medium salinity and injecting CO2 gas into the culture medium. Productivity peaked at 44.01 g/m2/d in October 2017. Throughout the trials, there were no significant differences in average lipid content, which was 14.88 ± 1.26%, 14.73 ± 2.44%, 12.81 ± 2.82%, and 13.63 ± 3.42% in 2014, 2015, 2016, and 2017, respectively. Our results demonstrated that high biomass productivity and constant lipid content can be sustainably maintained under Korean climate conditions.

Interfacial interactions of SERS-active noble metal nanostructures with functional ligands for diagnostic analysis of protein cancer markers.

Noble metal nanostructures with designed hot spots have been widely investigated as surface-enhanced Raman spectroscopy (SERS)-active substrates, particularly for selective and sensitive detection of protein cancer markers. For specific target recognition and efficient signal amplification, SERS probe design requires a choice of SERS-active nanostructures as well as their controlled functionalization with Raman dyes and target recognition entities such as antibodies. However, the chemical conjugation of antibodies and Raman dyes to SERS substrates has rarely been discussed to date, despite their substantial roles in detection schemes. The interfacial interactions of metal nanostructures with functional ligands during conjugation are known to be strongly influenced by the various chemical and physical properties of the ligands, such as size, molecular weight, surface charge, 3-dimensional structures, and hydrophilicity/hydrophobicity. In this review, we discuss recent developments in the design of SERS probes over the last 4 years, focusing on their conjugation chemistry for functionalization. A strong preference for covalent bonding is observed with Raman dyes having simpler molecular structures, whereas more complicated ones are non-covalently adsorbed. Antibodies are both covalently and non-covalently bonded to nanostructures, depending on their activity in the SERS probes. Considering that ligand conjugation is highly important for chemical stability, biocompatibility, and functionality of SERS probes, this review is expected to expand the understanding of their interfacial design, leading to SERS as one of the most promising spectroscopic analytical tools for the early detection of protein cancer markers.

Robust frequency stabilization and linewidth narrowing of a laser with large intermittent frequency jumps using an optical cavity and an atomic beam.

An experimental method is developed for robust frequency stabilization using a high-finesse cavity when the laser exhibits large intermittent frequency jumps. This is accomplished by applying an additional slow feedback signal from Doppler-free fluorescence spectroscopy in an atomic beam with increased frequency locking range. As a result, a stable and narrow-linewidth 556 nm laser maintains the frequency lock status for more than a week and contributes to more accurate evaluation of the Yb optical lattice clock. In addition, the reference optical cavity is supported at vibration-insensitive points without any vibration isolation table, making the laser setup more simple and compact.

Concurrent design of quasi-random photonic nanostructures.

Nanostructured surfaces with quasi-random geometries can manipulate light over broadband wavelengths and wide ranges of angles. Optimization and realization of stochastic patterns have typically relied on serial, direct-write fabrication methods combined with real-space design. However, this approach is not suitable for customizable features or scalable nanomanufacturing. Moreover, trial-and-error processing cannot guarantee fabrication feasibility because processing-structure relations are not included in conventional designs. Here, we report wrinkle lithography integrated with concurrent design to produce quasi-random nanostructures in amorphous silicon at wafer scales that achieved over 160% light absorption enhancement from 800 to 1,200 nm. The quasi-periodicity of patterns, materials filling ratio, and feature depths could be independently controlled. We statistically represented the quasi-random patterns by Fourier spectral density functions (SDFs) that could bridge the processing-structure and structure-performance relations. Iterative search of the optimal structure via the SDF representation enabled concurrent design of nanostructures and processing.

Graphene Wrinkles Enable Spatially Defined Chemistry.

This paper reports a scalable approach to achieve spatially selective graphene functionalization using multiscale wrinkles. Graphene wrinkles were formed by relieving the strain in thermoplastic polystyrene substrates conformally coated with fluoropolymer and graphene skin layers. Chemical reactivity of a fluorination process could be tuned by changing the local curvature of the graphene nanostructures. Patterned areas of graphene nanowrinkles and crumples followed by a single-process plasma reaction resulted in substrates with regions having different fluorination levels. Notably, conductivity of the functionalized graphene nanostructures could be locally tuned as a function of feature size without affecting the mechanical properties.

Secretome Analysis of Host Cells Infected with Toxoplasma gondii after Treatment of Human Epidermal Growth Factor Receptor 2/4 Inhibitors.

Toxoplasma gondii, a ubiquitous, intracellular parasite of the phylum Apicomplexa, infects an estimated one-third of the human population as well as a broad range of warm-blooded animals. We have observed that some tyrosine kinase inhibitors suppressed the growth of T. gondii within host ARPE-10 cells. Among them, afatinib, human epithermal growth factor receptor 2 and 4 (HER2/4) inhibitor, may be used as a therapeutic agent for inhibiting parasite growth with minimal adverse effects on host. In this report, we conducted a proteomic analysis to observe changes in host proteins that were altered via infection with T. gondii and the treatment of HER2/4 inhibitors. Secreting proteins were subjected to a procedure of micor basic reverse phase liquid chromatography, nano-liquid chromatography-mass spectrometry, and ingenuity pathway analysis serially. As a result, the expression level of heterogeneous nuclear ribonucleoprotein K, semaphorin 7A, a GPI membrane anchor, serine/threonine-protein phosphatase 2A, and calpain small subunit 1 proteins were significantly changed, and which were confirmed further by western blot analysis. Changes in various proteins, including these 4 proteins, can be used as a basis for explaining the effects of T. gondii infections and HER2/4 inhibitors.

One-Pot Synthesis of a Zwitterionic Small Molecule Bearing Disulfide Moiety for Antibiofouling Macro- and Nanoscale Gold Surfaces.

The goal of this study is to develop a simple one-pot method for the synthesis of a zwitterionic small molecule bearing disulfide moiety, which can effectively inhibit nonspecific protein adsorption on macroscopic and nanoscopic gold surfaces. To this end, the optimal molecular structure of a pyridine disulfide derivative was explored and a zwitterionic small molecule was successfully synthesized from the tertiary amine residue on the pyridine ring through a one-pot method. The coating conditions of the synthesized zwitterionic molecules on the gold surface were optimized through contact angle measurements, and the strong interactions between the gold surface and the disulfide moiety of the zwitterion small molecule were confirmed by surface plasmon resonance (SPR) analysis and X-ray photoelectron spectroscopy. The antibiofouling properties of the coated gold surface were analyzed by fluorescence microscopic observations after contacting with FITC-labeled bovine serum albumin (BSA) and SPR sensor as contacting with BSA solution. In addition, the effect of zwitterion-coating on the salt stability of and protein adsorption on nanoscopic gold surfaces were examined through a NaCl stability test and BSA adsorption test, respectively. From the obtained results, it was confirmed that the simply synthesized zwitterionic small molecule was effective in inhibiting nonspecific protein adsorption on macroscopic and nanoscopic gold surfaces; further, it enhanced the salt stability of gold nanoparticle surfaces.

Inhibitory effects of flavonoids isolated from Sophora flavescens on indoleamine 2,3-dioxygenase 1 activity.

Indoleamine 2,3-dioxygenase 1 (IDO1), a tryptophan catabolising enzyme, is known as a tumour cell survival factor that causes immune escape in several types of cancer. Flavonoids of Sophora flavescens have a variety of biological benefits for humans; however, cancer immunotherapy effect has not been fully investigated. The flavonoids (1-6) isolated from S. flavescens showed IDO1 inhibitory activities (IC50 4.3-31.4 µM). The representative flavonoids (4-6) of S. flavescens were determined to be non-competitive inhibitors of IDO1 by kinetic analyses. Their binding affinity to IDO1 was confirmed using thermal stability and surface plasmon resonance (SPR) assays. The molecular docking analysis and mutagenesis assay revealed the structural details of the interactions between the flavonoids (1-6) and IDO1. These results suggest that the flavonoids (1-6) of S. flavescens, especially kushenol E (6), as IDO1 inhibitors might be useful in the development of immunotherapeutic agents against cancers.

Programmable and reversible plasmon mode engineering.

Plasmonic nanostructures with enhanced localized optical fields as well as narrow linewidths have driven advances in numerous applications. However, the active engineering of ultranarrow resonances across the visible regime-and within a single system-has not yet been demonstrated. This paper describes how aluminum nanoparticle arrays embedded in an elastomeric slab may exhibit high-quality resonances with linewidths as narrow as 3 nm at wavelengths not accessible by conventional plasmonic materials. We exploited stretching to improve and tune simultaneously the optical response of as-fabricated nanoparticle arrays by shifting the diffraction mode relative to single-particle dipolar or quadrupolar resonances. This dynamic modulation of particle-particle spacing enabled either dipolar or quadrupolar lattice modes to be selectively accessed and individually optimized. Programmable plasmon modes offer a robust way to achieve real-time tunable materials for plasmon-enhanced molecular sensing and plasmonic nanolasers and opens new possibilities for integrating with flexible electronics.

Stretchable Nanolasing from Hybrid Quadrupole Plasmons.

This paper reports a robust and stretchable nanolaser platform that can preserve its high mode quality by exploiting hybrid quadrupole plasmons as an optical feedback mechanism. Increasing the size of metal nanoparticles in an array can introduce ultrasharp lattice plasmon resonances with out-of-plane charge oscillations that are tolerant to lateral strain. By patterning these nanoparticles onto an elastomeric slab surrounded by liquid gain, we realized reversible, tunable nanolasing with high strain sensitivity and no hysteresis. Our semiquantum modeling demonstrates that lasing build-up occurs at the hybrid quadrupole electromagnetic hot spots, which provides a route toward mechanical modulation of light-matter interactions on the nanoscale.

Studying the fundamental limit of optical fiber links to the 10-21 level.

We present a hybrid fiber link combining effective optical frequency transfer and evaluation of performances with a self-synchronized two-way comparison. It enables us to detect the round-trip fiber noise and each of the forward and backward one-way fiber noises simultaneously. The various signals acquired with this setup allow us to study quantitatively several properties of optical fiber links. We check the reciprocity of the accumulated noise forth and back over a bi-directional fiber to the level of 3.1(±3.9) × 10-20 based on a 160000s continuous data. We also analyze the noise correlation between two adjacent fibers and show the first experimental evidence of interferometric noise at very low Fourier frequency. We estimate redundantly and consistently the stability and accuracy of the transferred optical frequency over 43 km at 4 × 10-21 level after 16 days of integration and demonstrate that a frequency comparison with instability as low as 8 × 10-18 would be achievable with uni-directional fibers in urban area.