Effects of Microwave Heating and Long-Term Aging on the Rheological and Chemical Properties of Recovered Bitumen.

Microwave heating of asphalt pavement is a promising technique to reduce the maintenance and increase the service life of materials through self-healing of cracks. Previous studies have shown that microwave heating technology at high temperatures could damage the bitumen of asphalt mixture, which is an unwanted effect of the crack-healing technique. In this study, the effects of microwave heating and long-term aging on the rheological and chemical properties of recovered bitumen were quantified using a frequency sweep test and Fourier Transform Infrared Spectrometry analysis, respectively. The main results indicate that microwave heating has no significant effect on the aging performance of G* and δ for aged asphalt mixtures. However, for newer bitumens, the rheological properties G* and δ show minor changes after microwave heating was applied. Overall, this study confirms that microwave heating is a potential alternative for maintenance of asphalt pavements, without severely affecting the rheological and chemical properties of bitumen.

Numerical Simulation of Crack Propagation in Flexible Asphalt Pavements Based on Cohesive Zone Model Developed from Asphalt Mixtures.

To give engineers involved in planning and designing of asphalt pavements a more accurate prediction of crack initiation and propagation, theory-based models need to be developed to connect the loading conditions and fracture mechanisms present in laboratory tests and under traffic loading. The aim of this study is to develop a technical basis for the simulation of fracture behavior of asphalt pavements. The cohesive zone model (CZM) approach was applied in the commercial FE software ABAQUS to analyze crack propagation in asphalt layers. The CZM developed from the asphalt mixtures in this study can be used to simulate the fracture behavior of pavements and further optimize both the structure and the materials. The investigations demonstrated that the remaining service life of asphalt pavements under cyclic load after the initial onset of macro-cracks can be predicted. The developed CZM can, therefore, usefully supplement conventional design methods by improving the accuracy of the predicted stress states and by increasing the quality, efficiency, and safety of mechanical design methods by using this more realistic modeling approach.

Comparison of Mechanical Responses of Asphalt Mixtures under Uniform and Non-Uniform Loads Using Microscale Finite Element Simulation.

Continuously increasing traffic volumes necessitate accurate design methods to ensure the optimal service life and efficient use of raw materials. Numerical simulations commonly pursue a simplified approach with homogeneous pavement materials and homogeneous loading. Neither the pavement geometry nor the loading is homogeneous in reality. In this study, the mechanical response of the asphalt mixtures due to homogeneous loads is compared with their mechanical response to inhomogeneous loads. A 3D finite element model was reconstructed with the aid of X-ray computed tomography. Sections of a real tire's pressure distribution were used for the inhomogeneous loads. The evaluation of the material response analyzes the stress distribution within the samples. An inhomogeneous load evokes an increased proportion of high stresses within the sample in every case, particularly at low temperatures. When comparing the two types of loads, the average stresses on the interior (tension and compression) exhibit significant differences. The magnitude of the discrepancies shows that this approach yields results that differ significantly from the common practice of using homogeneous models and can be used to improve pavement design.