RESUMEN
Anaerobic technologies are consolidated for sewage treatment and are the core processes for mining marketable products from waste streams. However, anaerobic effluents are supersaturated with methane, which represents a liability regarding greenhouse gas emissions. Meanwhile, anaerobic technologies are not capable of nitrogen removal, which is required to ensure environmental protection. Methane oxidation and denitrification processes can be combined to address both issues concurrently. Aerobic methane oxidizers can release intermediate organic compounds that can be used by conventional denitrifiers as electron donors. Alternatively, anoxic methanotrophic species combine methane oxidation with either nitrate or nitrite reduction in the same metabolism. Engineered systems need to overcome the long doubling times and low NOx consumption rates of anoxic methanotrophic microorganisms. Another commonly reported bottleneck of methanotrophic denitrification relates to gas-liquid mass transfer limitations. Although anaerobic effluents are supersaturated with methane, experimental setups usually rely on methane supply in a gaseous mode. Hence, possibilities for the application of methane-oxidation coupled to denitrification in full scale might be overlooked. Moreover, syntrophic relationships among methane oxidizers, denitrifiers, nitrifiers, and other microorganisms (such as anammox) are not well understood. Integrating mixed populations with various metabolic abilities could allow for more robust methane-driven wastewater denitrification systems. This review presents an overview of the metabolic capabilities of methane oxidation and denitrification and discusses technological aspects that allow for the application of methanotrophic denitrification at larger scales.
Asunto(s)
Desnitrificación , Aguas Residuales , Oxidación Anaeróbica del Amoníaco , Anaerobiosis , Reactores Biológicos , Metano , Nitrógeno , Oxidación-ReducciónRESUMEN
This study examined the performance of pilot-scale vertical subsurface flow constructed wetlands (VSF-CWs) planted with three indigenous plants, i.e. Typha latifolia, Cyperus alternifolius, and Cynodon dactylon, in removing heavy metals from secondary treated refinery wastewater under tropical conditions. The T. latifolia-planted VSF-CW had the best heavy metal removal performance, followed by the Cyperus alternifolius-planted VSF-CW and then the Cynodon dactylon-planted VSF-CW. The data indicated that Cu, Cr, Zn, Pb, Cd, and Fe were accumulated in the plants at all the three VSF-CWs. However, the accumulation of the heavy metals in the plants accounted for only a rather small fraction (0.09-16%) of the overall heavy metal removal by the wetlands. The plant roots accumulated the highest amount of heavy metals, followed by the leaves, and then the stem. Cr and Fe were mainly retained in the roots of T. latifolia, Cyperus alternifolius, and Cynodon dactylon (TF < 1), meaning that Cr and Fe were only partially transported to the leaves of these plants. This study showed that VSF-CWs planted with T. latifolia, Cyperus Alternifolius, and Cynodon dactylon can be used for the large-scale removal of heavy metals from secondary refinery wastewater.
Asunto(s)
Biodegradación Ambiental , Metales Pesados , Petróleo , Typhaceae , Aguas Residuales , Nigeria , Purificación del Agua , HumedalesRESUMEN
A local sensitivity analysis was performed for a chemically synthesized elemental sulfur (S0)-based two-step denitrification model, accounting for nitrite (NO2 -) accumulation, biomass growth and S0 hydrolysis. The sensitivity analysis was aimed at verifying the model stability, understanding the model structure and individuating the model parameters to be further optimized. The mass specific area of the sulfur particles (a*) and hydrolysis kinetic constant (k1) were identified as the dominant parameters on the model outputs, i.e. nitrate (NO3 -), NO2 - and sulfate (SO4 2-) concentrations, confirming that the microbially catalyzed S0 hydrolysis is the rate-limiting step during S0-driven denitrification. Additionally, the maximum growth rates of the denitrifying biomass on NO3 - and NO2 - were detected as the most sensitive kinetic parameters.
Asunto(s)
Reactores Biológicos , Desnitrificación , Nitratos , Nitritos , AzufreRESUMEN
During storage of urine, urea is biologically decomposed to ammonia, which can be lost through volatilization and in turn causes significant unpleasant smell. In response, lactic acid fermentation of urine is a cost-effective technique to decrease nitrogen volatilization and reduce odour emissions. Fresh urine (pH = 5.2-5.3 and NH4+-N = 1.2-1.3 g L-1) was lacto-fermented for 36 days in closed glass jars with a lactic acid bacterial inoculum from sauerkraut juice and compared to untreated, stored urine. In the lacto-fermented urine, the pH was reduced to 3.8-4.7 and the ammonium content by 22-30%, while the pH of the untreated urine rose to 6.1 and its ammonium content increased by 32% due to urea hydrolysis. The concentration of lactic acid bacteria in lacto-fermented urine was 7.3 CFU ml-1, suggesting that urine is a suitable growth medium for lactic acid bacteria. The odour of the stored urine was subjectively perceived by four people to be twice as strong as that of lacto-fermented samples. Lacto-fermented urine induced increased radish germination compared to stored urine (74-86% versus 2-31%). Adding a lactic acid bacterial inoculum to one week old urine in the storage tanks in a urine-diverting dry toilet reduced the pH from 8.9 to 7.7 after one month, while the ammonium content increased by 35%, probably due to the high initial pH of the urine. Given that the hydrolyzed stale urine has a high buffering capacity, the lactic acid bacterial inoculum should be added to the urine storage tank of a UDDT before urine starts to accumulate there to increase the efficiency of the lactic acid fermentation.
Asunto(s)
Ácido Láctico , Orina/química , Fermentación , Humanos , Concentración de Iones de Hidrógeno , Hidrólisis , Nitrógeno , Odorantes , Volatilización , Eliminación de Residuos LíquidosRESUMEN
Hydrothermal carbonization technology can convert fecal waste into a valuable carbonaceous product referred to as hydrochar. We investigated the potential of fecal waste-derived hydrochar as an adsorbent for virus removal in water treatment. Swine feces was hydrothermally treated under two conditions: at 180 °C for 2 h and 230 °C for 7 h. The resulting solid products (hydrochar) were evaluated as virus adsorbents in water treatment. Simultaneous removal of pathogenic rotavirus (RV) and human adenovirus (HAdV) was investigated using a sand column set-up of 10 cm bed height with and without hydrochar supplement (1.5%, w/w). The removal efficiency of both viruses in a hydrochar-amended column was >3 log (complete removal). The amount of virus released in deionized water when flushed into the virus-retaining columns indicated that the secondary energy minimum played a more important role in RV retention than that of HAdV. Zeta-potential and hydrophobicity measurements on hydrochar materials indicated that the improved virus removal performance of hydrochar-amended columns was induced by the provision of extra hydrophobic surfaces. This study provides evidence that fecal waste-derived hydrochar can be used as a competent virus adsorbent.
Asunto(s)
Adenoviridae/aislamiento & purificación , Agua Subterránea/virología , Rotavirus/aislamiento & purificación , Eliminación de Residuos Líquidos/métodos , Adsorción , Animales , Carbón Orgánico/química , Heces/química , Sus scrofaRESUMEN
AIMS: To determine the pathogenic virus removal performance of an adsorbent produced from hydrothermal carbonization of sewage sludge. METHODS AND RESULTS: The removal of human pathogenic rotavirus and adenovirus was investigated with columns of 10 cm saturated sand with and without amendments of 1·5% (w/w) hydrochar. Virus concentrations were determined with reverse transcription (RT) quantitative polymerase chain reaction (qPCR). The experiments with sand showed 1 log removal, while the columns with 1·5% (w/w) hydrochar amendment showed 2 to >3 log removal for both viruses. Deionized (DI) water flushing into the virus-retaining columns revealed that the secondary energy minimum played a larger role in the attachment of rotavirus onto hydrochar surfaces than adenovirus. Improved virus removal may be attributed to the introduction of hydrophobic and/or meso-macro surface structures of the hydrochar providing favourable attachment sites for viruses. CONCLUSIONS: Hydrochar amended sand beds showed improved virus removal efficiencies exceeding 99·6% corresponding to 2·4 log removal. The addition of humic acid in the influent did not hinder the adsorptive removal of viruses. SIGNIFICANCE AND IMPACT OF THE STUDY: This study suggests that hydrochar derived from sewage sludge can be used as an adsorbent for virus removal in water treatment.
Asunto(s)
Adenoviridae/química , Agua Subterránea/virología , Rotavirus/química , Aguas del Alcantarillado/química , Purificación del Agua/métodos , Adsorción , Humanos , Sustancias Húmicas/análisis , Dióxido de Silicio/química , Purificación del Agua/instrumentaciónRESUMEN
AIMS: To identify bacteria with high selenium tolerance and reduction capacity for bioremediation of wastewater and nanoselenium particle production. METHODS AND RESULTS: A bacterial endophyte was isolated from the selenium hyperaccumulator Stanleya pinnata (Brassicaceae) growing on seleniferous soils in Colorado, USA. Based on fatty acid methyl ester analysis and multi-locus sequence analysis (MLSA) using 16S rRNA, gyrB, rpoB and rpoD genes, the isolate was identified as a subspecies of Pseudomonas moraviensis (97.3% nucleotide identity) and named P. moraviensis stanleyae. The isolate exhibited extreme tolerance to SeO3(2-) (up to 120 mmol l(-1)) and SeO4(2-) (>150 mmol l(-1)). Selenium oxyanion removal from growth medium was measured by microchip capillary electrophoresis (detection limit 95 nmol l(-1) for SeO3(2-) and 13 nmol l(-1) for SeO4(2-)). Within 48 h, P. moraviensis stanleyae aerobically reduced SeO3(2-) to red Se(0) from 10 mmol l(-1) to below the detection limit (removal rate 0.27 mmol h(-1) at 30 °C); anaerobic SeO3(2-) removal was slower. No SeO4(2-) removal was observed. Pseudomonas moraviensis stanleyae stimulated the growth of crop species Brassica juncea by 70% with no significant effect on Se accumulation. CONCLUSIONS: Pseudomonas moraviensis stanleyae can tolerate extreme levels of selenate and selenite and can deplete high levels of selenite under aerobic and anaerobic conditions. SIGNIFICANCE AND IMPACT OF THE STUDY: Pseudomonas moraviensis subsp. stanleyae may be useful for stimulating plant growth and for the treatment of Se-laden wastewater.
Asunto(s)
Brassicaceae/microbiología , Endófitos/metabolismo , Pseudomonas/metabolismo , Ácido Selenioso/metabolismo , Selenio/metabolismo , Aerobiosis , Biodegradación Ambiental , Brassicaceae/metabolismo , Endófitos/clasificación , Endófitos/genética , Endófitos/aislamiento & purificación , Pseudomonas/clasificación , Pseudomonas/genética , Pseudomonas/aislamiento & purificaciónRESUMEN
The individual and combined effect of the pH, chemical oxygen demand (COD) and SO4 (2-) concentration, metal to sulfide (M/S(2-)) ratio and hydraulic retention time (HRT) on the biological sulfate reduction (SR) process was evaluated in an inverse fluidized bed reactor by factorial design analysis (FDA) and response surface analysis (RSA). The regression-based model of the FDA described the experimental results well and revealed that the most significant variable affecting the process was the pH. The combined effect of the pH and HRT was barely observable, while the pH and COD concentration positive effect (up to 7 and 3 gCOD/L, respectively) enhanced the SR process. Contrary, the individual COD concentration effect only enhanced the COD removal efficiency, suggesting changes in the microbial pathway. The RSA showed that the M/S(2-) ratio determined whether the inhibition mechanism to the SR process was due to the presence of free metals or precipitated metal sulfides.
Asunto(s)
Reactores Biológicos/microbiología , Metales Pesados/química , Sulfatos/química , Bacterias Reductoras del Azufre/metabolismo , Eliminación de Residuos Líquidos/métodos , Contaminantes Químicos del Agua/química , Biodegradación Ambiental , Biopelículas , Análisis de la Demanda Biológica de Oxígeno , Interpretación Estadística de Datos , Concentración de Iones de Hidrógeno , Oxidación-Reducción , Sulfuros/química , Aguas Residuales/químicaRESUMEN
The morphology, mineralogy, and solid-liquid phase separation of the Cu and Zn precipitates formed with sulfide produced in a sulfate-reducing bioreactor were studied at pH 3, 5, and 7. The precipitates formed at pH 7 display faster settling rates, better dewaterability, and higher concentrations of settleable solids as compared to the precipitates formed at pH 3 and 5. These differences were linked to the agglomeration of the sulfidic precipitates and coprecipitation of the phosphate added to the bioreactor influent. The Cu and Zn quenched the intensity of the dissolved organic matter peaks identified by fluorescence-excitation emission matrix spectroscopy, suggesting a binding mechanism that decreases supersaturation, especially at pH 5. X-ray absorption fine structure spectroscopy analyses confirmed the precipitation of Zn-S as sphalerite and Cu-S as covellite in all samples, but also revealed the presence of Zn sorbed on hydroxyapatite. These analyses further showed that CuS structures remained amorphous regardless of the pH, whereas the ZnS structure was more organized at pH 5 as compared to the ZnS formed at pH 3 and 7, in agreement with the cubic sphalerite-type structures observed through scanning electron microscopy at pH 5.
Asunto(s)
Reactores Biológicos , Cobre/aislamiento & purificación , Sulfuros/química , Compuestos de Zinc/química , Zinc/aislamiento & purificación , Precipitación Química , Cobre/química , Durapatita/química , Fluorescencia , Concentración de Iones de Hidrógeno , Minerales/química , Tamaño de la Partícula , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/aislamiento & purificación , Espectroscopía de Absorción de Rayos X , Zinc/químicaRESUMEN
AIMS: To determine the magnitude of microbial risks from waterborne viruses and bacteria in Bwaise III in Kampala (Uganda), a typical slum in Sub-Saharan Africa. METHODS AND RESULTS: A quantitative microbial risk assessment (QMRA) was carried out to determine the magnitude of microbial risks from waterborne pathogens through various exposure pathways in Bwaise III in Kampala (Uganda). This was based on the concentration of Escherichia coli O157:H7, Salmonella spp., rotavirus (RV) and human adenoviruses F and G (HAdV) in spring water, tap water, surface water, grey water and contaminated soil samples. The total disease burden was 680 disability-adjusted life years (DALYs) per 1000 persons per year. The highest disease burden contribution was caused by exposure to surface water open drainage channels (39%) followed by exposure to grey water in tertiary drains (24%), storage containers (22%), unprotected springs (8%), contaminated soil (7%) and tap water (0.02%). The highest percentage of the mean estimated infections was caused by E. coli O157:H7 (41%) followed by HAdV (32%), RV (20%) and Salmonella spp. (7%). In addition, the highest infection risk was 1 caused by HAdV in surface water at the slum outlet, while the lowest infection risk was 2.71 × 10(-6) caused by E. coli O157:H7 in tap water. CONCLUSIONS: The results show that the slum environment is polluted, and the disease burden from each of the exposure routes in Bwaise III slum, with the exception of tap water, was much higher than the WHO reference level of tolerable risk of 1 × 10(-6) DALYs per person per year. SIGNIFICANCE AND IMPACT OF THE STUDY: The findings of this study provide guidance to governments, local authorities and nongovernment organizations in making decisions on measures to reduce infection risk and the disease burden by 10(2) to 10(5) depending on the source of exposure to achieve the desired health impacts. The infection risk may be reduced by sustainable management of human excreta and grey water, coupled with risk communication during hygiene awareness campaigns at household and community level. The data also provide a basis to make strategic investments to improve sanitary conditions in urban slums.
Asunto(s)
Adenovirus Humanos/crecimiento & desarrollo , Escherichia coli O157/crecimiento & desarrollo , Rotavirus/crecimiento & desarrollo , Salmonella/crecimiento & desarrollo , Microbiología del Agua , Bacterias , Costo de Enfermedad , Escherichia coli , Humanos , Áreas de Pobreza , Años de Vida Ajustados por Calidad de Vida , Medición de Riesgo , Saneamiento/métodos , Saneamiento/normas , Microbiología del Suelo , Uganda , Población Urbana , VirusRESUMEN
Decentralised grey water treatment in urban slums using low-cost and robust technologies offers opportunities to minimise public health risks and to reduce environmental pollution caused by the highly polluted grey water i.e. with a COD and N concentration of 3000-6000 mg L(-1) and 30-40 mg L(-1), respectively. However, there has been very limited action research to reduce the pollution load from uncontrolled grey water discharge by households in urban slums. This study was therefore carried out to investigate the potential of a two-step filtration process to reduce the grey water pollution load in an urban slum using a crushed lava rock filter, to determine the main filter design and operation parameters and the effect of intermittent flow on the grey water effluent quality. A two-step crushed lava rock filter unit was designed and implemented for use by a household in the Bwaise III slum in Kampala city (Uganda). It was monitored at a varying hydraulic loading rate (HLR) of 0.5-1.1 m d(-1) as well as at a constant HLR of 0.39 m d(-1). The removal efficiencies of COD, TP and TKN were, respectively, 85.9%, 58% and 65.5% under a varying HLR and 90.5%, 59.5% and 69%, when operating at a constant HLR regime. In addition, the log removal of Escherichia coli, Salmonella spp. and total coliforms was, respectively, 3.8, 3.2 and 3.9 under the varying HLR and 3.9, 3.5 and 3.9 at a constant HLR. The results show that the use of a two-step filtration process as well as a lower constant HLR increased the pollutant removal efficiencies. Further research is needed to investigate the feasibility of adding a tertiary treatment step to increase the nutrients and microorganisms removal from grey water.
Asunto(s)
Composición Familiar , Salud Urbana , Aguas Residuales , Abastecimiento de Agua , Análisis de la Demanda Biológica de Oxígeno , Nitrógeno/análisis , Proyectos Piloto , Espectrometría por Rayos X , Uganda , Microbiología del AguaRESUMEN
Two uPVC columns (outer diameter 160 cm, internal diameter 14.6 cm and length 100 cm) were operated in parallel and in series to simulate grey water treatment by media based filtration at unsaturated conditions and constant hydraulic loading rates (HLR). Grey water from bathroom, laundry and kitchen activities was collected from 10 households in the Bwaise III slum in Kampala (Uganda) in separate containers, mixed in equal proportions followed by settling, prior to transferring the influent to the tanks. Column 1 was packed with lava rock to a depth of 60 cm, while column 2 was packed with lava rock (bottom 30 cm) and silica sand, which was later replaced by granular activated carbon (top 30 cm) to further investigate nutrient removal from grey water. Operating the two filter columns in series at a HLR of 20 cm/day resulted in a better effluent quality than at a higher (40 cm/day) HLR. The COD removal efficiencies by filter columns 1 and 2 in series amounted to 90% and 84% at HLR of 20 cm/day and 40 cm/day, respectively. TOC and DOC removal efficiency amounted to 77% and 71% at a HLR of 20 cm/day, but decreased to 72% and 67% at a HLR of 40 cm/day, respectively. The highest log removal of Escherichia coli, Salmonella sp. and total coliforms amounted to 3.68, 3.50 and 3.95 at a HLR of 20 cm/day respectively. The overall removal of pollutants increased with infiltration depth, with the highest pollutant removal efficiency occurring in the top 15 cm layer. Grey water pre-treatment followed by double filtration using coarse and fine media has the potential to reduce the grey water pollution load in slum areas by more than 60%.
Asunto(s)
Áreas de Pobreza , Eliminación de Residuos Líquidos/métodos , Purificación del Agua/métodos , Abastecimiento de Agua , Filtración/métodos , Humanos , Uganda , Microbiología del AguaRESUMEN
Sanitation in urban slums, especially in countries in Sub-Saharan Africa, is a challenge. One of the solutions to sanitation is to valorize waste, and to convert bio-waste present in the slum in a cheap and affordable way into lignite via hydrothermal carbonization (HTC). HTC is simple, cheap, converts all carbon (100%), eliminates pathogens completely, and requires wet starting products/biomass, thereby avoiding complicated drying schemes. In this research, we investigated the effectiveness of removing a divalent metal-ion, cadmium, using equilibrium batch experiments and columns of sand-supported hydrothermally carbonized colloidal lignite (HTCCL) derived from sugar, maize, and grass. Our results indicated that equilibrium sorption could be best described by a Langmuir isotherm. The uptake capacity varied from 0.11 to 0.21 mg Cd/g HTC, dependent on the type of HTC used. These values were relatively low compared to other carbonaceous sorbents. However, removal efficiencies in column experiments were remarkably high: 70-100% during 20-24 pore volumes or bed volumes of flushing. We concluded that HTCCL is a promising sorbent that can be used to treat heavily polluted water and/or wastewater.
Asunto(s)
Carbono , Dióxido de Silicio , Contaminantes Químicos del Agua/química , Purificación del Agua/métodos , Adsorción , África , Aguas ResidualesRESUMEN
The effects of calcium on the equilibrium adsorption capacity of As(III) and As(V) onto iron oxide-coated sand (IOCS) and granular ferric hydroxide (GFH) were investigated through batch experiments, rapid small-scale column tests (RSSCT) and kinetics modelling. Batch experiments showed that at calcium concentrations ≤ 20 mg/L, high As(III) and As(V) removal efficiencies by IOCS and GFH are achieved at pH 6. An increase of the calcium concentration to 40 and 80 mg/L reversed this trend, giving higher removal efficiencies at higher pH (8). The adsorption capacities of IOCS and GFH at an equilibrium arsenic concentration of 10 µg/L were found to be between 2.0 and 3.1 mg/g for synthetic water without calcium and between 2.8 and 5.3 mg/g when 80 mg/L of calcium was present at the studied pH values. After 10 hours of filter run in RSSCT, approximately 1000 empty bed volumes, the ratios of C/Co for As(V) were 26% and 18% for calcium-free model water; and only 1% and 0.2% after addition of 80 mg/L of Ca for filter columns with IOCS and GFH, respectively. The adsorption of As(III) and As(V) onto GFH follows a second-order reaction, with and without addition of calcium. The adsorption of As(III) and As(V) onto IOCS follows a first-order reaction without calcium addition, and moves to the second-reaction-order kinetics when calcium is added. Based on the intraparticle diffusion model, the main controlling mechanism for As(III) adsorption is intraparticle diffusion, while surface diffusion contributes greatly to the adsorption of As(V).
Asunto(s)
Arsénico/química , Calcio/química , Compuestos Férricos/química , Contaminantes Químicos del Agua/química , Adsorción , Difusión , Modelos TeóricosRESUMEN
The large area demand of constructed wetlands (CWs) is documented as a weak point that can be potentially reduced by applying active aeration. The aim of this study was, therefore, to understand the effects of aeration on the treatment performance, the biofilm activity, the protozoan population size and potential CW footprint reduction of different horizontal flow (HF) CW configurations. Two experimental periods were considered: a first period with low organic loading rate (OLR) and a second period with high OLR. Three HF CW configurations were compared: a conventional (control), an aerated and a hybrid CW (aerated followed by a non-aerated CW). The results obtained reinforced the competence of aerated CW for organic matter removal (81-89% of chemical oxygen demand) while for nitrogen elimination the control (19-24%) and hybrid (8-41%) systems performed better than the aerated system (-6% to 33%). Biofilm activity and protozoa abundance were distinctly higher at the inlet zones when compared with the outlet zones of all CWs, as well as in the aerated systems when compared with the non-aerated CWs. The protozoan abundance increased with an increase in the OLR and ciliates were found to be the dominant group. Overall, the active aeration highlighted the efficiency and stability of the CWs for organic matter removal and thus can be used as a promising tool to enhance microbial activity and grazing by protozoa; eventually reducing solid accumulation in the bed media. These beneficial effects contribute to reduce the CWs' area requirements.
Asunto(s)
Microbiología del Agua , Purificación del Agua , Humedales , Aerobiosis , Biopelículas , Aguas Residuales/química , Aguas Residuales/microbiologíaRESUMEN
Lignocellulosic residues (LRs) are one of the most abundant wastes produced worldwide. Nevertheless, unlocking the full energy potential from LRs for biofuel production is limited by their complex structure. This study investigated the effect of N-methylmorpholine N-oxide (NMMO) pretreatment on almond shell (AS), spent coffee grounds (SCG), and hazelnut skin (HS) to improve their bioconversion to methane. The pretreatment was performed using a 73% NMMO solution heated at 120 °C for 1, 3, and 5 h. The baseline methane productions achieved from raw AS, SCG, and HS were 54.7 (± 5.3), 337.4 (± 16.5), and 265.4 (± 10.4) mL CH4/g VS, respectively. The NMMO pretreatment enhanced the methane potential of AS up to 58%, although no changes in chemical composition and external surface were observed after pretreatment. Opposite to this, pretreated SCG showed increased porosity (up to 63%) and a higher sugar percentage (up to 27%) after pretreatment despite failing to increase methane production. All pretreatment conditions were effective on HS, achieving the highest methane production of 400.4 (± 9.5) mL CH4/g VS after 5 h pretreatment. The enhanced methane production was due to the increased sugar percentage (up to 112%), lignin removal (up to 29%), and loss of inhibitory compounds during the pretreatment. An energy assessment revealed that the NMMO pretreatment is an attractive technology to be implemented on an industrial scale for energy recovery from HS residues. Supplementary Information: The online version contains supplementary material available at 10.1007/s13399-022-03173-x.
RESUMEN
The presence of viruses in a slum environment where sanitation is poor is a major concern. However, little is known of their occurrence and genomic copy concentration in the slum environment. The main objective of this study was to determine the genomic copy concentrations of human adenoviruses F and G, Rotavirus (RV), Hepatitis A virus (HAV), Hepatitis E virus (HEV) and human adenovirus species A,C,D,E, and F (HAdV-ACDEF) in Bwaise III, a typical slum in Kampala, Uganda. Forty-one samples from surface water, grey water and ground water were collected from 30 sampling locations. The virus particles were recovered by glass wool filtration with elution using beef extract. DNA and RNA viruses were detected by the real time quantitative polymerase chain reaction (qPCR) and the reverse transcription-qPCR (RT-qPCR), respectively. HAdV-F and G were detected in 70.7% of the samples with concentrations up to 2.65 × 10(1) genomic copies per mL (gc mL(-1)). RV and HAV were detected in 60.9% and 17.1% of the samples, respectively. The maximum concentration of RV was 1.87 × 10(2)gc mL(-1). In addition, 78% of the samples tested positive for the HAdV-ACDEF, but all samples tested negative for HEV. These new data are essential for quantitative microbial risk assessment, and for understanding the effects of environmental pollution in slums.
Asunto(s)
Adenoviridae/aislamiento & purificación , Genómica , Áreas de Pobreza , Rotavirus/aislamiento & purificación , Virus/aislamiento & purificación , Microbiología del Agua , Adenoviridae/genética , Humanos , Reacción en Cadena de la Polimerasa de Transcriptasa Inversa , Rotavirus/genética , Uganda , Virus/clasificaciónRESUMEN
A constructed wetroof (CWR) is defined in this study as the combination of a green roof and a constructed wetland: a shallow wastewater treatment system placed on the roof of a building. The foremost challenge of such CWRs, and the main aim of this investigation, is the selection of an appropriate matrix capable of assuring the required hydraulic retention time, the long-term stability and the roof load-bearing capacity. Six substrata were subjected to water dynamics and destructive tests in two testing-tables. Among all the materials tested, the substratum configuration composed of sand, light expanded clay aggregates, biodegradable polylactic acid beads together with stabilization plates and a turf mat is capable of retaining the water for approximately 3.8 days and of providing stability (stabilization plates) and an immediate protection (turf mat) to the system. Based on those results, a full-scale CWR was built, which did not show any physical deterioration after 1 year of operation. Preliminary wastewater treatment results on the full-scale CWR suggest that it can highly remove main wastewater pollutants (e.g. chemical oxygen demand, PO4(3-)-P and NH4(+)-N). The results of these tests and practical design considerations of the CWR are discussed in this paper.
Asunto(s)
Materiales de Construcción , Purificación del Agua , HumedalesRESUMEN
This research was conducted to select suitable natural organic substrates as potential carbon sources for use as electron donors for biological sulphate reduction in a permeable reactive barrier (PRB). A number of organic substrates were assessed through batch and continuous column experiments under anaerobic conditions with acid mine drainage (AMD) obtained from an abandoned lignite coal mine. To keep the heavy metal concentration at a constant level, the AMD was supplemented with heavy metals whenever necessary. Under anaerobic conditions, sulphate-reducing bacteria (SRB) converted sulphate into sulphide using the organic substrates as electron donors. The sulphide that was generated precipitated heavy metals as metal sulphides. Organic substrates, which yielded the highest sulphate reduction in batch tests, were selected for continuous column experiments which lasted over 200 days. A mixture of pig-farm wastewater treatment sludge, rice husk and coconut husk chips yielded the best heavy metal (Fe, Cu, Zn and Mn) removal efficiencies of over 90%.