SlCRCa is a key D-class gene controlling ovule fate determination in tomato.

Cell fate determination and primordium initiation on the placental surface are two key events for ovule formation in seed plants, which directly affect ovule density and seed yield. Despite ovules form in the marginal meristematic tissues of the carpels, angiosperm carpels evolved after the ovules. It is not clear how the development of the ovules and carpels is coordinated in angiosperms. In this study, we identify the S. lycopersicum CRABS CLAW (CRC) homologue SlCRCa as an essential determinant of ovule fate. We find that SlCRCa is not only expressed in the placental surface and ovule primordia but also functions as a D-class gene to block carpel fate and promote ovule fate in the placental surface. Loss of function of SlCRCa causes homeotic transformation of the ovules to carpels. In addition, we find low levels of the S. lycopersicum AINTEGUMENTA (ANT) homologue (SlANT2) favour the ovule initiation, whereas high levels of SlANT2 promote placental carpelization. SlCRCa forms heterodimer with tomato INNER NO OUTER (INO) and AGAMOUS (AG) orthologues, SlINO and TOMATO AGAMOUS1 (TAG1), to repress SlANT2 expression during the ovule initiation. Our study confirms that angiosperm basal ovule cells indeed retain certain carpel properties and provides mechanistic insights into the ovule initiation.

The zinc finger protein StMR1 affects the pathogenicity and melanin synthesis of Setosphaeria turcica and directly regulates the expression of DHN melanin synthesis pathway genes.

The infection and colonization of pathogenic fungi are often regulated by transcription factors. In our previous study, the zinc finger protein-encoding gene StMR1 was found to be highly expressed during the infection process of Setosphaeria turcica, the pathogen causing northern corn leaf blight. Evolutionary tree analysis showed that this gene was associated with regulatory factors of melanin synthesis. However, the regulatory mechanism of melanin synthesis and its effect on pathogenicity remain unclear. In this study, the function of StMR1 was analyzed by gene knockout. When the expression level of StMR1 in the mutants was significantly reduced, the colony color became lighter, the mycelia were curved and transparent, and the mutant showed a significant loss of pathogenicity. In addition, compared with wild-type, the accumulation of melanin decreased significantly in ΔStmr1. RNA-seq analysis revealed 1,981 differentially expressed genes between the wild-type and knockout mutant, among which 39 genes were involved in melanin metabolism. qPCR revealed that the expression levels of six key genes in the melanin synthesis pathway were significantly reduced. ChIP-PCR and yeast one-hybrid assays confirmed that StMR1 directly binds to the promoters of St3HNR, St4HNR, StPKS, and StLAC2 in the DHN melanin synthesis pathway and regulates gene expression. The C2H2-type zinc fingers and Zn(Ⅱ)2Cys6 binuclear cluster in StMR1 were important for the binding to targets.

Abundance, characteristics, and removal of microplastics in the Cihu Lake-wetland microcosm system.

Sewage treatment plants (STPs) are significant routes through which microplastics (MPs) are released into the aquatic environment. Constructed wetland is an effective facility for deep treatment of tailwater. At present, research on the removal of MPs in the tailwater of STPs by multi-stage constructed wetlands is limited. This work investigated and analyzed the removal characteristics of MPs in the tailwater treatment system of Cihu wetland park in Huangshi, Hubei Province of China. The abundance/removal of MPs in the Cihu Lake-wetland microcosm system was investigated. The results showed that the multi-stage constructed wetlands achieved a total removal rate of 94.7% for MPs with 2.2 particles/L MPs in the effluent. The removal rates of MPs reached 89 and 37.5%, respectively, in the (horizontal/vertical) subsurface flow constructed wetland and surface flow constructed wetland. The abundance of MPs in receiving water of Cihu Lake substantially decreased due to the dilution of wetland effluents. This study partially bridged the knowledge gap hypothesis on the treatment of MPs in tailwater by multi-stage constructed wetlands.

Perturbation and strengthening effects of DOM on the biochar adsorption pathway.

Biochar is an effective adsorbent commonly used in pollutants adsorption. However, natural constituents, such as dissolved organic matter (DOM), could affect pollutants adsorption. In this study, we analyzed the mechanisms underlying phenol adsorption on pine biochar under perturbation by fertilizer-derived DOM. In addition, biochar property alterations were characterized and further analyzed. The results showed that phenol and DOM combined to a certain extent in the adsorption system. DOM affected the adsorption pathway, which increased the biochar adsorption efficiency for phenol. The addition of DOM2 promoted phenol adsorption efficiency (70.31%), with total DOM adsorption capacity of 61.45 mg g-1 onto biochar.

Environmental impact of express food delivery in China: the role of personal consumption choice.

The online food ordering business in China is developing rapidly in recent years with considerable environmental impacts. However, the impacts caused by the express food delivery and the differences between the regions with different economic levels have seldom been quantified. Changing personal consumption behavior might help to reduce such impacts. But to what extent personal consumption changing could alter the environmental impacts caused by express food delivery remained uncertain. Thus, we have conducted a quantitative study based on the data collected from a 45-persons survey to determine the environmental impacts caused by the express food delivery in the different regions of China. Additionally, the reducible environmental impacts were estimated by establishing a scenario of personal consumption behavior changing. The results showed that each express food delivery order would generate 111.80 g CO2 emission equivalent on average. Most (86%) of the CO2 equivalent of the express food delivery came from the food packages. Compared to the orders in the second-class and third-class cities, the orders in the first-class cities had a significantly higher CO2 equivalent due to the greater use of food packages. The results also demonstrated that by walking to take the food in the restaurants nearby (< 1 km), 68% of the CO2 equivalent derived from the express food delivery could be reduced. People's willingness to change consumption behavior plays an important role to achieve the environmental impact reduction.

Small-size polyethylene and polylactic microplastic alterations on soil aggregate formation with soil sterilization.

Soil microplastic contamination is emerging as a significant environmental concern affecting soil properties and biota, including soil aggregation. This study aimed to determine the influence of soil microplastics on soil aggregation, their impact through effects on soil microorganisms, and their effects on water and mechanical stability of soil aggregates. Soil incubation experiments were conducted using sterilized and non-sterilized soils with 15-µm polyethylene and polylactic microplastics over one month. Sterilized soils showed more water-stable aggregates, particularly in the 0.25-0.5 mm fraction (+49%), with both polyethylene and polylactic MPs significantly increasing this fraction (+34% and +35%, respectively). However, no significant effects of soil sterilization and MP addition were found on mechanical stability. The addition of MPs tended to decrease aggregate surface roughness but not significantly (-17～21%). The study provides insights into the complex interactions between microplastics and soil aggregation, suggesting that MP effects may not necessarily be related to their toxicity on soil microbes but could involve various physical interactions.

The Influence of Rare Earth Ce on the Microstructure and Properties of Cast Pure Copper.

The effects of rare earth Ce on the microstructure and properties of cast pure copper were investigated through thermodynamic calculations, XRD analysis, mechanical testing, metallographic microscopy, and scanning electron microscopy (SEM). The experimental results demonstrate that the reaction between rare earth Ce and oxygen as well as sulfur in copper exhibits a significantly negative Gibbs free energy value, indicating a strong thermodynamic driving force for deoxidation and desulfurization reactions. Ce is capable of removing trace amounts of O and S from copper. Moreover, the maximum solid solubility of Ce in Cu falls within the range of 0.009% to 0.01%. Furthermore, Ce can refine columnar grains while enlarging equiaxed grains in as-cast copper. Upon the addition of rare earth Ce, the tensile strength increased by 8.45%, elongation increased by 12.1%, and microhardness rose from 73.5 HV to 81.2 HV-an increase of 10.5%. Overall, rare earth Ce has been found to enhance both the microstructure and mechanical properties of cast pure copper.

Heat and mass transfer based on the low-temperature thermal treatment of hydrocarbons-impacted soil: A numerical simulation and sandbox validation.

Thermal treatment can be an effective method for soil remediation, and numerical models play a crucial role in elucidating the underlying processes that affect efficacy. In this study, experiments were conducted to examine the low-temperature thermal treatment for removing n-hexane and n-octane from soil. The results showed that the removal of two alkanes followed the pseudo-first-order kinetics. Additionally, a quantitative relationship between kinetics constant and temperature was established. Based on experimental results, a simple mathematical model was presented via COMSOL Multiphysics 6.0. The processes considered in the model incorporated conductive and convective heat transfer, the vaporization latent heat, and the removal of organic contaminants which was quantified using an advection-dispersion equation combined with a pseudo-first-order kinetic. The developed model was first validated by a thermal treatment in a soil column, demonstrating conformity with the measured temperature and concentration values. Subsequently, the temporal and spatial changes in soil temperature and contaminant levels were evaluated for different heating temperatures. It was found that thermal conduction dominated heat transfer, whereas thermal convection caused by the migration of liquid water intensified when the temperature was higher than the boiling point. The completion time exhibited a correlation with the heating temperature. It was predicted that the time required to achieve a 90% removal efficiency could be shortened from 14 h to 9.5 h by elevating the heating temperature from 80 â„ƒ to 120 â„ƒ. The study also investigated the impact of the initial water content on heat transfer. It was observed that the saturated soil showed the slowest heating rate and the longest boiling stage.

Nonocclusive mesenteric ischemia after percutaneous kyphoplasty: A case report.

RATIONALE: Percutaneous kyphoplasty (PKP) is a minimally invasive technique employed for treating vertebral compression fractures. Although PKP is simple and relatively safe, severe complications are possible. Here, we report a new, severe complication linked to this procedure, namely nonocclusive mesenteric ischemia (NOMI). PATIENT CONCERNS: An 83-year-old female patient, previously in good health, fell backward, landing on her buttocks, and subsequently experienced persistent low-back pain that exacerbated during turning or sitting up. DIAGNOSES: Lumbar spine radiography revealed wedge deformity of the L1 vertebral body. Lumbar spine magnetic resonance imaging indicated a fresh compression fracture of the L1 vertebral body. INTERVENTIONS: On the 2nd day following the trauma, the patient underwent PKP under local anesthesia. Anesthesia was satisfactory, and the procedure progressed smoothly. OUTCOMES: The patient experienced mild discomfort in the right abdomen within the 1st hour to 3 days postoperatively, mild abdominal distension on the 4th day, and sudden severe abdominal pain on the 5th day. Immediate abdominal computed tomography revealed ischemic changes in the ascending colon and hepatic flexure, accompanied by hepatic portal venous gas. An hour later, abdominal pain spontaneously subsided. Approximately 5 hours later, an enhanced abdominal computed tomography revealed no filling defects in the mesenteric vasculature, absence of luminal narrowing or occlusion, enhanced intestinal walls, and a notable improvement in hepatic portal venous gas. Considering NOMI and ischemia related to superior mesenteric artery spasm, vasodilator therapy (papaverine hydrochloride) was initiated, leading to favorable outcomes. On day 17, pathological examination of the hepatic flexure revealed moderate, acute, and chronic mucosal inflammation, along with interstitial fibrous tissue proliferation, providing clear evidence supporting ischemic changes. She was discharged on day 18 after a successful recovery. LESSONS: The occurrence of NOMI after PKP is uncommon. Yet, once it happens, delayed diagnosis or misdiagnosis can lead to serious consequences such as intestinal necrosis and abdominal infection, even endangering the patient's life. We currently lack experience in preventing this complication, but timely diagnosis and appropriate intervention are effective measures in treating such complications.

Heat stress impairs floral meristem termination and fruit development by affecting the BR-SlCRCa cascade in tomato.

Floral meristem termination is a key step leading to carpel initiation and fruit development. The frequent occurrence of heat stress due to global warming often disrupts floral determinacy, resulting in defective fruit formation. However, the detailed mechanism behind this phenomenon is largely unknown. Here, we identify CRABS CLAW a (SlCRCa) as a key regulator of floral meristem termination in tomato. SlCRCa functions as an indispensable floral meristem terminator by suppressing SlWUS activity through the TOMATO AGAMOUS 1 (TAG1)-KNUCKLES (SlKNU)-INHIBITOR OF MERISTEM ACTIVITY (SlIMA) network. A direct binding assay revealed that SlCRCa specifically binds to the promoter and second intron of WUSCHEL (SlWUS). We also demonstrate that SlCRCa expression depends on brassinosteroid homeostasis in the floral meristem, which is repressed by heat stress via the circadian factor EARLY FLOWERING 3 (SlELF3). These results provide new insights into floral meristem termination and the heat stress response in flowers and fruits of tomato and suggest that SlCRCa provides a platform for multiple protein interactions that may epigenetically abrogate stem cell activity at the transition from floral meristem to carpel initiation.

Long-term microbial community succession and mechanisms of regulation of dissolved organic matter derivation in livestock manure fermentation system.

Industrial-scale aerobic fermentation was conducted with livestock manures. Microbial inoculation promoted the growth of Bacillaceae and consolidated its position as the dominant microorganism. Microbial inoculation substantially influenced dissolved organic matter (DOM) derivation and variations of related components in the fermentation system. The relative abundance of humic acid-like substances of DOM increased from 52.19% to 78.27% in microbial inoculation system, resulting in a high humification level. Moreover, lignocellulose degradation and microbial utilization were the important factors influencing DOM content in fermentation systems. The fermentation system was regulated by microbial inoculation, thus achieving a high level of fermentation maturity.

Study on the mechanism of co-pyrolysed biochar on soil DOM evolution in short-term cabbage waste decomposition.

Cabbage waste returned soil was studied to assess the short-term influences of the application of cabbage waste biochar (CB), pine wood biochar (PB), and co-pyrolysed biochar (PCB) on soil dissolved organic matter (DOM) evolution. The decrease in DOM and soil organic matter (SOM) content was greater in the biochar-added soils during 35 days of decomposition. The DOM and SOM content in PCB added group decreased by 26.96 mg L-1 and 4.48 g kg-1, respectively. The increase in relative abundance of humic acid-like substances in DOMs was higher in the biochar-added soils during decomposition, which increased by 4.29% in PCB added group. PCB addition also resulted in a high SOM content (initial content of 78.82 g kg-1), and mineral elements were introduced into the soil, thus increasing soil pH (7.81) and electrical conductivity (574.67 µs cm-1). Moreover, the addition of biochars attenuated the decrease in average relative abundance of Bacillaceae and promoted bacterial proliferation during decomposition. The application of biochars regulated the soil bacterial community and promoted organic matter conversion and soil DOM evolution.

Quantitative comparison of the delignification performance of lignocellulosic biomass pretreatment technologies for enzymatic saccharification.

Pretreatments for delignification are required for the enzymatic saccharification of lignocellulosic biomasses. However, in the current literature, various pretreatment approaches have been applied for the same kinds of biomass. To find the optimum pretreatments for biomaterials containing various lignin contents, in this study, a quantitative comparison was carried out on the delignification performance of 15 categories of pretreatments. In total, 1729 sets of biomass, cellulose, hemicellulose, and lignin recovery data were collected from 214 relevant studies. Box plots and Cate-Nelson-like graphs were applied for analyses. The results showed that alkali, oxidation, organic solvent, and multistep pretreatments generally were better at removing lignin and recovering cellulose. Moreover, among these four categories, alkali pretreatments had the best performance, increasing the saccharification efficiency by approximately five-fold. Considering both delignification performance and saccharification improvement, alkali pretreatments are currently considered to be the optimum pretreatment methods for enzymatic saccharification.

Gas6 Exerts Neuroprotective Effects via Restoring the Blood-Brain Barrier in Mice with Sepsis-Associated Encephalopathy.

OBJECTIVE: Sepsis-associated encephalopathy (SAE), characterized by cognitive and emotional impairments, is not well investigated in sepsis survivors. Growth arrest-specific gene 6 (Gas6) has been extensively used to treat cerebral diseases. This study aimed to evaluate the neuroprotective effects of Gas6 in post-septic mice and to determine the underlying mechanisms of action. METHODS: Mice underwent cecal ligation and puncture (CLP) for sepsis induction. Mice were then immediately injected with 6 µg of Gas6 via the tail vein, and the effect was evaluated after 24 hours. The neurological severity score (NSS) was used to assess neurological deficits in post-septic mice. In addition, brain edema was evaluated by measuring the brain water content and blood-brain barrier (BBB) permeability using Evans blue (EB) dye extravasation. Western blotting and immunofluorescence assays were performed to determine the expression of tight junction (TJ)-associated proteins such as occludin and zonula occludens-1 (ZO-1). RESULTS: Post-septic mice exhibited increased NSS, brain edema, and BBB permeability. However, acute Gas6 treatment attenuated the severe effects of sepsis on neurologic function in mice. Therefore, Gas6 attenuates brain edema and restores BBB permeability. These findings suggest that Gas6 could alleviate neurological deficits, brain edema, BBB damage, and reverse the decreased expression of occludin and ZO-1 in the brain tissue to protect against SAE. CONCLUSION: Gas6 protects against SAE by restoring the impaired BBB permeability.

Short-term effects of polyethene and polypropylene microplastics on soil phosphorus and nitrogen availability.

Microplastics are an emerging threat to soils, but little is known about their effects on soil nitrogen (N) and phosphorus (P) cycling. In this study, a three-month soil incubation experiment has been conducted to analyze the effects of polyethene (PE) and polypropylene (PP) microplastics in sizes of 0-1 mm and 1-5 mm on soil available phosphate, nitrate, and ammonium contents under different fertilization regimes. Soil phosphorus and nitrogen availability were continuously determined in-situ by ion-exchange membrane method during the incubation. Microplastic surface chemical composition and the specific surface area were analyzed by FTIR and BET, respectively. The 16s rRNA sequencing of soil bacterial communities as well as soil pH have been determined after the incubation. The results showed that the presence of microplastics could significantly (P < 0.05) decrease soil available phosphate content from 122.61 mg P L-1 to 63.43 mg P L-1. The addition of PP microplastics could significantly increase soil available ammonium content from 0.94 mg N L-1 to 1.53 mg N L-1. Since microplastics had undetectable specific surface area and limited effects on soil microorganisms, adsorption and microorganism alteration functions might not be the main drivers of microplastic effects on soil phosphorus and nitrogen.

Microplastic effects on soil system parameters: a meta-analysis study.

Microplastics are generally considered as an emerging contaminant in the environment due to their toxic additives and transport of other contaminants. However, the potential threats of microplastics in soil should be concerned due to inconsistent research results. In this study, a meta-analysis based on 32 recent relevant studies was conducted to compare the response of soil system parameters including microbial community, aggregate structure, soil nutrient contents, and crop growth to the presence of microplastics. The results showed that microplastics presented no significant effects on soil dissolved organic carbon contents and the amounts of available phosphate, nitrate, and ammonium. Although microplastics would not significantly influence the diversity of soil microorganisms, they could significantly increase soil microorganism amounts with a standard mean difference at 19.32. We also found that microplastics tended to significantly decrease soil water stable macro-aggregate (> 0.25 mm) contents with a significantly negative standard mean difference (- 0.90) in meta-analysis. Moreover, soil microplastics seemed not to affect crop growth by having non-significant effects on both crop under-ground and above-ground biomasses. These results indicate that up to date, the main negative impacts caused by microplastics on soil systems could be their negative functions on soil aggregation.

A descriptive and comparative analysis on the adsorption of PPCPs by molecularly imprinted polymers.

Molecularly imprinted polymers (MIPs) have aroused great attention as a new material for the removal or detection of pharmaceuticals and personal care products (PPCPs). However, it is not clear about the superiority and deficiency of MIPs in the process of removing or detecting PPCPs. Herein, we evaluated the performance of MIPs in the aspects of adsorption capacity, binding affinity, adsorption rate, and compatibility to other techniques, and proposed ways to improve its performance. Without regard to the selectivity of MIPs, for the PPCPs adsorption, MIPs surprisingly did not always perform better than the conventional adsorbents (non-imprinted polymers, biochar, activated carbon and resin), indicating that MIPs should be used where selectivity is crucial, for example recovery of specific PPCPs in an environmental sample extraction process. Compared to the traditional solid-phase extraction for PPCPs detection pretreatment, the usage of MIPs as substitute extraction agents could obtain high selectivity of specific substance, due to the uniformity and effectiveness of the specific sites. A promising development in the future would be to combine other simple and rapid quantitative technologies, such as electro/photochemical sensor and catalytic degradation, to realize rapid and sensitive detection of trace PPCPs.

Microplastisphere may induce the enrichment of antibiotic resistance genes on microplastics in aquatic environments: A review.

Microplastics have been proven to be hotspots of bacterial pathogens and antibiotic resistance genes (ARGs). The enrichment of ARGs in microplastisphere, the specific niche for diverse microbial communities attached to the surface of microplastic, has attracted worldwide attention. By collecting 477 pairs of ARG abundance data belonging to 26 ARG types, based on the standardized mean difference (SMD) under the random effect model, we have performed the first meta-analysis of the ARG enrichment on microplastics in aquatic environments in order to quantitatively elucidate the enrichment effect, with comparison of non-microplastic materials. It was found that ARGs enriched on the microplastics were more abundant than that on the inorganic substrates (SMD = 0.26) and natural water environments (SMD = 0.10), but lower abundant than that on the natural organic substrates (SMD = -0.52). Furthermore, microplastics in freshwater tended to have a higher degree of ARG enrichment than those in saline water and sewage. The biofilm formation stage, structure, and component of microplastisphere may play a significant role in the enrichment of ARGs.

Algae-induced photodegradation of antibiotics: A review.

Antibiotics are a typical group of pharmaceutical and personal care products (PPCPs) with emerging pollutant effects. The presence of residual antibiotics in the environment is a prominent issue owing to their potential hazards, toxic effects, and persistence. Several treatments have been carried out in aquatic environments in order to eliminate antibiotic residues. Among these, photodegradation is regarded as an environmentally-friendly and efficient option. Indirect photodegradation is the main pathway for the degradation of residual antibiotics in natural water, as opposed to direct photodegradation. Algae, working as photosensitizers, play an important role in the indirect photolysis of residual antibiotics in natural water bodies. They promote this reaction by secreting extracellular organic matters (EOMs) and inducing the generation of active species. In order to provide a thorough understanding of the effects of algae on residual antibiotic degradation in the environment, this paper comprehensively reviews the latest research regarding algae-induced antibiotic photodegradation. The summary of the different pathways and photosensitive mechanisms involved in this process show that EOMs are indispensable to antibiotic photodegradation. The influencing factors of algae-induced photodegradation are also discussed here: these include algae species, antibiotic types, and environmental variables such as light source, ferric ion presence, temperature, and ultrasound treatment. Based on the review of existing literature, this paper also considers several pathways for the future study of algae-induced antibiotic photodegradation.

Effects of organic fertilizers via quick artificial decomposition on crop growth.

Applying organic matters into the soil would help to improve soil quality and sustain crop production. In addition, the small molecular organic matters could be active in influencing soil nutrient cycling and crop development. Thus, this study has firstly induced a new technology of quick artificial decomposition to produce fertilizers containing small molecular organic compounds from crop residues and other biological wastes. The fertilizers were produced via the quick artificial decomposition from biological wastes. The small organic species in the fertilizers were identified by the LC-MS. Field experiments of kiwifruit were conducted to test the effects of fertilizers. In total, 341 species of small organic matters have been determined in the produced fertilizers. The results showed that the organic fertilizers could significantly increase the yields of kiwifruit by 15.2% in contrast with mineral fertilizer treatments. Whereas, the organic fertilizers could enhance the contents of nutritive components in kiwifruits. These results proved that the organic fertilizers containing more small organic matter could be more efficient in promoting crop production.