Heat-Set Supramolecular Hydrogelation by Regulating the Hydrophilic-Lipophilic Balance for a Tunable Circularly Polarized Luminescent Switch.

Heat-set supramolecular gels exhibited totally opposite phase behaviors of dissolution upon cooling and gelation on heating. They are commonly discovered by chance and their rational design remains a great challenge. Herein, a rational design strategy is proposed to realize heat-set supramolecular hydrogelation through regulation of the hydrophilic-lipophilic balance of the system. A newly synthesized amphiphile hydrogelator with pyrene embedded in its lipophilic terminal can self-assemble into a hydrogel through a heating and cooling cycle. However, the host-guest complex of the gelator and hydrophilic γ-cyclodextrin (γ-CyD) results in a sol at room temperature. Thus, heat-set hydrogelation is realized from the sol state in a controllable manner. Heat-set gelation mechanism is revealed by exploring critical heat-set supramolecular gelation and the related findings provide a general strategy for developing new functional molecular gels with tunable hydrophilic-lipophilic balance.

Self-Assembly of Amphiphilic PDI and NDI Derivatives with Opposite Thermoresponsive Fluorescent Behaviors in Aqueous Solution.

This work presents a study of the thermally induced aggregation of perylene diimide (PDI) and naphthalene diimide (NDI) derivatives modified with oligo ethylene glycol (OEG) chains in aqueous solution. Water-soluble and flexible OEG side chains were introduced into the π-core of glutamate-modified NDI and PDI structures, and the aggregation process was modulated by heating or cooling in water. Interestingly, a rare opposite temperature response of fluorescent behavior from the two amphiphilic chromophores was revealed, in which the PDI exhibited fluorescent enhancement, while fluorescent quenching upon temperature increase was observed from the NDI assembly. The mechanism of thermally induced aggregation is clearly explained by studies with various spectroscopic techniques including UV-visible, fluorescence, 1H NMR, 2D NMR spectroscopy, and SEM observation as well as control experiments operated in DMSO solution. It is found that although similar J-aggregates were formed by both amphiphilic chromophores in aqueous solution, the temperature response of the aggregates to temperature was opposite. The degree of PDI aggregation decreased, while that of NDI increased upon temperature rising. This research paves a valuable way for understanding the complicated supramolecular behaviors of amphiphilic chromophores.

A Fluorescence Biosensor Based on Carbon Quantum Dots Prepared from Pomegranate Peel and T-Hg2+-T Mismatch for Hg2+ Detection.

Mercury ions (Hg2+) can cause damage to human health, and thus, the study of the detection of Hg2+ is extraordinarily important in daily life. This work reported a fluorescence biosensor for the detection of Hg2+. The key point of this strategy was that the fluorescence of carbon quantum dots made from pomegranate peel (P-CQDs) was quenched by hemin, and restored after G-quadruplex binding with hemin. The presence of Hg2+ caused thymine (T)-rich DNA fragments to form T-Hg2+-T mismatches, and this change allowed the release of G-quadruplex. G-quadruplex could change the fluorescence of hemin/P-CQDs. P-CQDs exhibited excellent properties through characterization analysis, such as transmission electron microscope, X-ray photoelectron spectroscopy and Fourier transform infrared. This proposed fluorescence detection strategy established the linear ranges of Hg2+ from 1 nM to 50 nM. In conclusion, this simple biosensor had the advantages of strong sensitivity, high selectivity, and low cost for Hg2+ detection in environmental water samples.

Supramolecular Adhesives with Extended Tolerance to Extreme Conditions via Water-Modulated Noncovalent Interactions.

Development of supramolecular adhesives with strong tolerance to extreme conditions has emerged as an important research area. In this study, by balancing supramolecular interactions such as hydrogen bonding interactions, electrostatic interactions, π-π stacking interactions, and cation-π interactions, we designed and prepared a series of two-component supramolecular adhesives derived from small organic molecules. Highly efficient interfacial adhesion with maximum adhesion strength of ≈10.0 MPa was realized on various surfaces in air, organic solvents, or liquid nitrogen. Owing to balanced supramolecular interactions, water participation prolonged and increased the tolerance of the adhesives in extreme environments. We demonstrate that the combination of imidazole-based ionic liquids and phenols can be applied for various interfacial adhesions, thereby aiding the development of next-generation adhesives capable of adapting to various extreme conditions in a controlled manner.

Tuning Rheological Behaviors of Supramolecular Aqueous Gels via Charge Transfer Interactions.

Rheological properties are critical for determining real applications of supramolecular gels in various fields. Correspondingly, the modulation of gel rheology will be very important for meeting real requirements. In this aspect, a few strategies were applied to tune the rheological behaviors of supramolecular gels, but some specific interactions like charge transfer (CT) interactions were less explored at the molecular level. Herein, we report a pyrene-containing derivative of diphenylalanine as a donor gelator and naphthalenediimide or 3,5-dinitrobenzene as matching acceptor molecules. It was found that the viscoelastic properties and strength of the original gel could be tuned through addition of different acceptor molecules to the original gel with changing the ratios of the selected acceptor molecules. As a result, storage modulus was continuously adjusted over a wide range from 190,000 to 50,000 Pa by CT interactions. Furthermore, the mechanism of the CT-induced change in rheological properties was understood and clarified through relevant techniques (e.g., UV-Vis, fluorescence, and FT-IR spectroscopy and TEM). The findings in this work would provide a novel strategy to modulate the rheological properties of supramolecular gels for adaption to broader fields of real applications.

Long-Persistent Circularly Polarized Phosphorescence from Chiral Organic Ionic Crystals.

Long-persistent circularly polarized phosphorescence (LPCPP) is achieved for the first time in chiral organic ionic crystals at room temperature. The co-crystal composed of terephtalic acid (TPA) and chiral α-phenylethyamines (PEAs) gave rise to LPCPP with lifetimes up to 862 ms and large dissymmetric factor (glum ). The hybridization of TPA with chiral PEAs allows circular polarization of the generated long-persistent phosphorescence. The observed mirror-image twisted molecular structures in the rigid lattices were responsible for the chiroptical activation of the generated long-persistent phosphorescence.

Solvent-Regulated Self-Assembly of an Achiral Donor-Acceptor Complex in Confined Chiral Nanotubes: Chirality Transfer, Inversion and Amplification.

A chiral gelator was designed and found to form chiral nanotwists and nanotubes in toluene and DMSO, respectively, which could serve as host chiral matrices for fabricating functional soft materials. Achiral, π-conjugated donor and acceptor guests were doped into the gel, and solvent-regulated self-assembly was observed. Although both the DMSO and toluene gels containing three components look similar as transparent gels, it was clarified microscopically that, whereas achiral dopants self-assemble in the confined nanotubes in the DMSO gel, they only dissolve in the liquid phase in the toluene gel. The existence of the achiral donor and acceptor in different phases made their properties completely different. Chirality transfer occurred from the host chiral gel matrixes to guest achiral porphyrin in DMSO. Remarkably, the addition of C60 to the porphyrin/gelator gel could invert and further amplify the induced chirality of the porphyrin due to the formation of donor-acceptor pairs. On the other hand, no chirality transfer was observed in the toluene gel. These observations clearly unveiled the selective self-assembly of different components in distinct gel phases, which could provide new insight into the design of chiroptical soft materials.

Construction of inorganic-organic 2D/2D WO3/g-C3N4 nanosheet arrays toward efficient photoelectrochemical splitting of natural seawater.

Hydrogen production from seawater and solar energy based on photoelectrochemical cells is extremely attractive due to earth-abundance of seawater and solar radiation. Herein, we report the successful fabrication of novel inorganic-organic 2D/2D WO3/g-C3N4 nanosheet arrays (WO3/g-C3N4 NSAs) grown on a FTO substrate via a facile hydrothermal growth and deposition-annealing process, and their application in natural seawater splitting. The results indicate that the WO3/g-C3N4 NSAs exhibit a photocurrent density of 0.73 mA cm(-2) at 1.23 V versus RHE under AM 1.5G (100 mW cm(-2)) illumination, which is 2-fold higher than that of WO3 NSAs. More importantly, the WO3/g-C3N4 NSA photoanode is quite stable during seawater splitting and the photocurrent density does not substantially decrease after continuous illumination for 3600 s. The remarkably enhanced performance originates primarily from the formation of the WO3/g-C3N4 heterojunction between WO3 and g-C3N4 nanosheets, which accelerates charge transfer and separation, and prolongs the lifetime of electrons as demonstrated by EIS and Mott-Schottky analyses. Finally, a possible mechanism for the improved performance was proposed and discussed.

Bioengineered tunable memristor based on protein nanocage.

Bioengineered protein-based nanodevices with tunable and reproducible memristive performance are fabricated by combining the unique high loading capacity of Archaeoglobus fulgidus ferritin with OWL-generated nanogaps. By tuning the iron amount inside ferritin, the ON/OFF ratio of conductance switching can be modulated accordingly. Higher molecular loading exhibits better memristive performance owing to the higher electrochemical activity of the ferric complex core.

Optoelectronics of organic nanofibers formed by co-assembly of porphyrin and perylenediimide.

Organic nanofibers are formed by simple ionic co-assembly of positively charged porphyrin (electron donor) and negatively charged perylenediimide (electron acceptor) derivatives in aqueous solution. Two kinds of electron transfer routes between electron donor and electron acceptor under light excitation in nanofibers are confirmed by DFT calculations and experimental data.

Microstructured graphene arrays for highly sensitive flexible tactile sensors.

A highly sensitive tactile sensor is devised by applying microstructured graphene arrays as sensitive layers. The combination of graphene and anisotropic microstructures endows this sensor with an ultra-high sensitivity of -5.53 kPa(-1) , an ultra-fast response time of only 0.2 ms, as well as good reliability, rendering it promising for the application of tactile sensing in artificial skin and human-machine interface.

Graphene carrier for magneto-controllable bioelectrocatalysis.

A magnetically driven fuel-free graphene carrier loaded with redox-active cargo-ferrocene as an electron mediator is fabricated for magneto-controllable bioelectrocatalysis. The activation and deactivation of redox-active cargo's redox activity by magnetically driven positioning of the graphene carrier with loaded ferrocene near and away from the conductive support can be employed for magneto-switchable bioelectrocatalyzed oxidation of glucose by glucose oxidase between active and inactive electrocatalytic states, respectively.

A synergistic capture strategy for enhanced detection and elimination of bacteria.

Despite the advanced detection and sterilization techniques available today, the sensitive diagnosis and complete elimination of bacterial infections remain a significant challenge. A strategy is reported for efficient bacterial capture (ca. 90%) based on the synergistic effect of the nanotopography and surface chemistry of the substrate on bacterial attachment and adhesion. The outstanding bacterial-capture capability of the functionalized nanostructured substrate enables rapid and highly sensitive bacterial detection down to trace concentrations of pathogenic bacteria (10 colony-forming units mL(-1)). In addition, this synergistic biocapture substrate can be used for efficient bacterial elimination and shows great potential for clinical antibacterial applications.

Facile synthesis of sulfur quantum dots with red light emission: Implications for electrochemiluminescence analysis application.

Sulfur quantum dots (SQDs) have been reported as a potential candidate due to their low toxicity and high luminescent performance. Here, SQDs with red light fluorescence (FL) emission were synthesized by a one-step hydrothermal method using Na2CO3 as an etching agent, using sublimed sulfur powder as a sulfur source, and using bovine serum albumin (BSA) as a stabilizer. The choice of etching agent (NaOH or Na2CO3) realized the tuning of SQDs' FL emission with blue and red light. The synthesized SQDs showed good FL stability and high FL efficiency, with a quantum yield of 1.03 % in an aqueous solution at 575 nm. In addition, stable and efficient electrochemiluminescence (ECL) emission was achieved by employing SQDs as ECL emitters with K2S2O8 as the co-reactant. The resorcinol (RS) can enhance the ECL intensity of the SQDs-K2S2O8 system, and the ECL intensity had a good linear relationship with the concentration of RS in a range from 2.5 nM to 25 nM with a detection limit of 0.61 nM. This work provides an emerging red-light luminescent SQDs, which would open up a way for the development of new types of luminophor in FL or ECL analysis. It also provides convenience for bio-labeling of live cells, in vivo imaging and provide new materials for photoelectric devices.

Boosting the Faraday Efficiency of Electrochemical Ammonia Synthesis via the Strain Effect Induced by Interfacial Hybrid Formation between BN and Carbon Nanotubes.

The electrochemical nitrogen reduction reaction (eNRR) is a highly promising alternative to the Haber-Bosch (H-B) process, but its commercial development is limited by the high bond energy of N2 molecules and the presence of the competitive hydrogen evolution reaction (HER). Here, a metal-free composite electrocatalyst of boron nitride (h-BNNs) and carbon nanotubes (CNTs) was explored through the interfacial hybridization of h-BNNs and CNTs, which showed a highly improved eNRR Faraday efficiency (FE) of 63.9% and an NH3 yield rate of 36.5 µg h-1 mgcat.-1 at -0.691 V (vs RHE). New chemical bonds of C-B and C-N were observed, indicating a strong interaction between CNTs and h-BNNs. According to the Raman spectra and the optimized model of h-BNNs/CNTs, an obvious strain effect between h-BNNs and CNTs was supposed to play a significant role in the highly improved FE, compared with the FE of h-BNNs alone (4.7%). Density functional theory (DFT) calculations further showed that h-BNNs/CNTs had lower energy barriers in eNRR, giving them higher N2 to NH3 selectivity, while h-BNNs have lower energy barriers in the HER. This work shows the important role of the strain effect in boosting the selectivity in the eNRR process.

Elucidation of interactions between myofibrillar proteins and κ-carrageenan as mediated by NaCl level: Perspectives on multiple spectroscopy and molecular docking.

The present study was aimed to investigate the intermolecular interaction between myofibrillar proteins (MP) and κ-carrageenan (KC) as mediated by KC concentration (0.1, 0.2, 0.3, and 0.4 %, w/w) and NaCl levels (0.3 and 0.6 M) based on the multiple spectroscopy and molecular docking. The results showed that the incorporation of KC increased the turbidity, zeta-potential, and surface hydrophobicity of MP-KC mixed sols with a dose-dependent manner, as well as significantly decreasing the protein solubility (P < 0.05), which indicated that the interaction between KC and MP promoted the expansion of protein structure and exposed more hydrophobic groups. Fluorescence spectra result revealed that the interaction between MP and KC was a static quenching in the fluorescence quenching process, which affected the aromatic amino acids residue microenvironment of MP. Moreover, the existence of KC decreased the α-helix contents of MP (P < 0.05), contributing to the transformation from random structure to organized configuration of MP. In addition, molecular forces, the molecular docking and thermodynamic parameters indicated that hydrophobic interactions, van der Waals force, and hydrogen bonding were considered as the main interaction forces between MP and KC. Furthermore, 0.6 M NaCl level rendered higher solubility and particle size, as well as lower turbidity and the surface hydrophobicity of MP-KC mixed sols than those with 0.3 M NaCl level (P < 0.05), which promoted the unfolding of MP molecule and subsequently increased the numbers of binding sites between MP and KC, facilitating the intermolecular interactions between MP and KC in mixed sols.

Strong Dynamic Interfacial Adhesion by Polymeric Ionic Liquids under Extreme Conditions.

Interfacial adhesion under extreme conditions has attracted increasing attention owing to its potential application of stopping leakages of oil or natural gas. However, interfacial adhesion is rarely stable at ultralow temperatures and in organic solvents, necessitating the elucidation of the molecular-level processes. Herein, we used the intermolecular force-control strategy to prepare four linear polymers by tuning the proportion of hydrogen bonding and the number of electrostatic sites. The obtained polymeric ion liquids displayed strong dynamic adhesion at various interfaces. They also efficiently tolerated organic solvents and ultracold temperatures. Highly reversible rheological behaviors are observed within a thermal cycle between high and ultracold temperatures. Temperature-dependent infrared spectra and theoretical calculation reveal thermal reversibility and interfacial adhesion/debonding processes at the molecular level, respectively. This intermolecular force-control strategy may be applied to produce environmentally adaptive functional materials for real applications.

Self-assembled ultralong chiral nanotubes and tuning of their chirality through the mixing of enantiomeric components.

Enantiomeric L- or D-glutamic acid based lipids were designed and their self-assembly was investigated. It was found that at a certain concentration, either L- or D-enantiomeric derivatives could self-assemble in absolute alcohol to form a white organogel, which was composed of ultralong nanotubes with an aspect ratio higher than 1000. Further investigations revealed that these nanotubes were in chiral forms. The chirality of the nanotubes was determined by that of the enantiomers employed. In addition, when D and L enantiomers were mixed in different ratios, the nanotube could be tuned consecutively from nanotubes with a helical seam to nanotwists, the chirality of which being determined by the excess enantiomer in the mixed systems. In the case of an equimolar mixture of the enantiomers, flat nanoplates instead of helical nanotubes or nanotwists were obtained. The FTIR vibrational data and XRD layer-distance values showed a consecutive change as a function of the enantiomeric excess. It was further revealed that the slightly stronger interaction between D-L enantiomeric pairs than that between D-D or L-L pairs was responsible for the formation of the diverse self-assembled nanostructures.

Evaluation and Treatment Analysis of Air Quality Including Particulate Pollutants: A Case Study of Shandong Province, China.

At present, China's air pollution and its treatment effect are issues of general concern in the academic circles. Based on the analysis of the development stages of air pollution in China and the development history of China's air quality standards, we selected 17 cities of Shandong Province, China as the research objects. By expanding China's existing Air Quality Index System, the air quality of six major pollutants including PM2.5 and PM10 in 17 cities from February 2017 to January 2020 is comprehensively evaluated. Then, with a forecast model, the air quality of the above cities in the absence of air pollution control policies since June 2018 was simulated. The results of the error test show that the model has a maximum error of 4.67% when simulating monthly assessment scores, and the maximum mean error of the four months is 3.17%. Through the comparison between the simulation results and the real evaluation results of air quality, we found that since June 2018, the air pollution control policies of six cities have achieved more than 10% improvement, while the air quality of the other 11 cities declined. The different characteristics of pollutants and the implementation of governance policies are perhaps the main reasons for the above differences. Finally, policy recommendations for the future air pollution control in Shandong and China were provided.

(R)-Binaphthyl derivatives as chiral dopants: substituent position controlled circularly polarized luminescence in liquid crystals.

A series of nonbridged axially chiral binaphthyl derivatives were synthesized and used as chiral dopants for chiral nematic liquid crystals (N*-LCs). It was found that binaphthyl derivatives substituted at 3,3' positions or 2,2' positions of binaphthyl rings could induce N*-LCs to show opposite circularly polarized luminescence (CPL) signals, despite having the same configuration. Additionally, a CPL switch could be constructed in these N*-LCs regulated by the applied electric field.