Incorporation of a Boron-Nitrogen Covalent Bond Improves the Charge-Transport and Charge-Transfer Characteristics of Organoboron Small-Molecule Acceptors for Organic Solar Cells.

An organoboron small-molecular acceptor (OSMA) MB←N containing a boron-nitrogen coordination bond (B←N) exhibits good light absorption in organic solar cells (OSCs). In this work, based on MB←N, OSMA MB-N, with the incorporation of a boron-nitrogen covalent bond (B-N), was designed. We have systematically investigated the charge-transport properties and interfacial charge-transfer characteristics of MB-N, along with MB←N, using the density functional theory (DFT) and the time-dependent density functional theory (TD-DFT). Theoretical calculations show that MB-N can simultaneously boost the open-circuit voltage (from 0.78 V to 0.85 V) and the short-circuit current due to its high-lying lowest unoccupied molecular orbital and the reduced energy gap. Moreover, its large dipole shortens stacking and greatly enhances electron mobility by up to 5.91 × 10-3 cm2·V-1·s-1. Notably, the excellent interfacial properties of PTB7-Th/MB-N, owing to more charge transfer states generated through the direct excitation process and the intermolecular electric field mechanism, are expected to improve OSCs performance. Together with the excellent properties of MB-N, we demonstrate a new OSMA and develop a new organoboron building block with B-N units. The computations also shed light on the structure-property relationships and provide in-depth theoretical guidance for the application of organoboron photovoltaic materials.

Theoretical insights into photo-induced isomerization mechanisms of phenylsulfinyl radical PhSO˙.

Sulfinyl radicals (R-SO˙) play important roles in lots of reactions, while the isomer oxathiyl radicals (R-OS˙) and the isomerization between them are rarely observed due to the poor stability of R-OS˙. In this work, the complete active space self-consistent field (CASSCF) and its multi-state second order perturbation (MS-CASPT2) methods were employed to study the photo-induced reaction mechanisms of phenylsulfinyl radical PhSO˙ 1 and its isomer phenoxathiyl radical PhOS˙ 2. Our results show that 1 and 2 have similar singly occupied molecular orbitals in the ground state but different properties in the excited state, which determine their diverse behaviors after irradiation. Radical 1 can generate 2 by light irradiation, but 2 produces isomerization product 3 (2-hydroxyphenylthiyl radical) and ring-opening product 4 (acyclic thioketoketene radical) in two paths via S atom migration intermediate Int1 (2-carbonylcyclohexadienthiyl radical). The former path involves consequent hydrogen shift reactions with a strongly exothermic process while the latter path involves both ring-expansion and ring-opening processes with a high barrier, resulting in a structural and energetic preference for the former path. Moreover, we revealed several conical intersections that participate in the reactions and facilitate the photochemical processes. Our calculations not only remain consistent with and clarify the experimental observations (X. Zeng, et al., J. Am. Chem. Soc., 2018, 140(31), 9972-9978) but also enrich the knowledge of sulfinyl radicals and isomer oxathiyl radicals.

A π-extended triphenylamine based dopant-free hole-transporting material for perovskite solar cells via heteroatom substitution.

The triphenylamine (TPA) group is an important molecular fragment that has been widely used to design efficient hole-transporting materials (HTMs). However, the applicability of triphenylamine derived HTMs that exhibit low hole mobility and conductivity in commercial perovskite solar cells (PSCs) has been limited. To aid in the development of highly desirable TPA-based HTMs, we utilized a combination of density functional theory (DFT) and Marcus electron transfer theory to investigate the effect of heteroatoms, including boron, carbon, nitrogen, oxygen, silicon, phosphorus, sulfur, germanium, arsenic, and selenium atoms, on the energy levels, optical properties, hole mobility, and interfacial charge transfer behaviors of a series of HTMs. Our computational results revealed that compared with the commonly referenced OMeTPA-TPA molecule, most heteroatoms lead to deeper energy levels. Furthermore, these heteroatom-based HTMs exhibit improved hole mobility due to their more rigid molecular structures. More significantly, these heteroatoms also enhance the interface interaction in perovskite/HTM systems, resulting in a larger internal electric field. Our work represents a new approach that aids in the understanding and designing of more efficient and better performing HTMs, which we hope can be used as a platform to propel the developmental commercialization of these highly desirable PSCs.

Theoretical design of asymmetric A-D1A'D2-A type non-fullerene acceptors for organic solar cells.

The acceptor in organic solar cells (OSCs) is of paramount importance for achieving a high photovoltaic performance. Based on the well-known non-fullerene acceptor Y6, we designed a set of asymmetric A-D1A'D2-A type new acceptors Y6-C, Y6-N, Y6-O, Y6-Se, and Y6-Si by substituting the two S atoms of one thieno[3,2-b]thiophene unit with C, N, O, Se, and Si atoms, respectively. The electronic, optical, and crystal properties of Y6 and the designed acceptors, as well as the interfacial charge-transfer (CT) mechanisms between the donor PM6 and the investigated acceptors have been systematically studied. It is found that the newly designed asymmetric acceptors possess suitable energy levels and strong interactions with the donor PM6. Importantly, the newly designed acceptors exhibit enhanced light harvesting ability and more CT states with larger oscillator strengths in the 40 lowest excited states. Among the multiple CT mechanisms, the direct excitation of CT states is found to be more favored in the case of PM6/newly designed acceptors than that of PM6/Y6. This work not only offers a set of promising acceptors superior to Y6, but also demonstrates that designing acceptors with asymmetric structure could be an effective strategy to improve the performance of OSCs.

Designing Hole Transport Materials with High Hole Mobility and Outstanding Interface Properties for Perovskite Solar Cells.

Organic-inorganic halide perovskite solar cells (PSCs) have attracted much attention due to their rapid increase in power conversion efficiencies (PCEs), and many efforts are devoted to further improving the PCEs. Designing highly efficient hole transport materials (HTMs) for PSCs may be one of the effective ways. Herein we theoretically designed three new HTMs (FDT-N, FDT-O, and FDT-S) by introducing a nitrogen-phenyl group, an oxygen atom, and a sulfur atom into the spiro core of an experimentally synthesized HTM (FDT), respectively. And then we performed quantum chemical calculation to study their application potential. The results show that the devices with FDT-O and FDT-S instead of FDT may have higher open circuit voltages owing to their lower highest occupied molecular orbital (HOMO) energy levels. Moreover, FDT-S exhibits the best hole transport performance among the studied HTMs, which may be due to the significant HOMO-HOMO overlap in the hole hopping path with the largest transfer integral. Furthermore, the results on interface properties indicate that introducing oxygen and sulfur atoms can enhance the MAPbI3 /HTM interface interaction. The present work not only offers two promising HTMs (FDT-O and FDT-S) for PSCs but also provides theoretical help for subsequent research on HTMs.

Theoretical study on the photochemistry of furoylazides: Curtius rearrangement and subsequent reactions.

Organic azides are an efficient source of nitrenes, which serve as vigorous intermediates in many useful organic reactions. In this work, the complete active space self-consistent field (CASSCF) and its second-order perturbation (CASPT2) methods were employed to study the photochemistry of 2-furoylazide 1 and 3-furoylazide 5, including the Curtius rearrangement to two furylisocyanates (3 and 7) and subsequent reactions to the final product cyanoacrolein 9. Our calculations show that the photoinduced Curtius rearrangement of the two furoylazides takes place through similar stepwise mechanisms via two bistable furoylnitrenes 2 and 6. However, the decarbonylation and ring-opening process of 7 to 9 prefers a stepwise mechanism involving the 3-furoylnitrene intermediate 8, while 3 to 9 goes in a concerted asynchronous way without the corresponding 2-furoylnitrene intermediate 4. Importantly, we revealed that several conical intersections play key roles in the photochemistry of furoylazides. Our results are not only consistent and also make clear the experimental observations (X. Zeng, et al., J. Am. Chem. Soc., 2018, 140, 10-13), but additionally provide important information on the chemistry of furoylazides and nitrenes.

Understanding the effects of the co-sensitizing ratio on the surface potential, electron injection efficiency, and Förster resonance energy transfer.

Multiple absorbers that function in different absorption regions (near infra-red (NIR) and UV-Visible (UV-Vis)) have been widely used in solar cell applications to enhance the light-harvesting. Herein, two special co-sensitizing Models 1 and 2, which feature either saturated dye IQ21 or saturated co-sensitizer S2, have been added to a TiO2 surface to explore the effect of the altered sensitizing sequence, namely the co-sensitizing ratio of IQ21/S2 and S2/IQ21 on the electrostatic potential variation (ΔV), electron injection efficiency (ηinj'), and Förster resonance energy transfer (FRET), using density functional theory and first-principle molecular dynamics simulations. The ΔV related to the open-circuit voltage (Voc) is insensitive in both Models 1 and 2. However, the absorption (λabs) and ηinj' associated with the short-circuit density (Jsc) display a significant deviation (the λabs for 1 is red-shifted compared to that of 2, and the ηinj' for 1 is improved by 56%). Meanwhile, Model 1 manifests a suppressed FRET and potentially favors co-sensitizer S2 functioning as the electron-injector and not the energy-donor. Another two possible Models 3 and 4 that feature a reduced adsorption of IQ21 and S2 relative to 1 and 2 were considered further, and the result mirrors the main trend in 1 and 2, except for the ηinj'. Overall, it implies that sensitizing a larger absorber with NIR features to saturate it first, then introducing a smaller absorber with UV-Vis features, can potentially improve the electron injection and diminish electron-hole recombination considerably. Our results provide a comprehensive analysis of the active role of an optimized sensitizing sequence to improve the conversion efficiency.

A peri-Xanthenoxanthene Centered Columnar-Stacking Organic Semiconductor for Efficient, Photothermally Stable Perovskite Solar Cells.

Modulating the structure and property of hole-transporting organic semiconductors is of paramount importance for high-efficiency and stable perovskite solar cells (PSCs). This work reports a low-cost peri-xanthenoxanthene based small-molecule P1, which is prepared at a total yield of 82 % using a three-step synthetic route from the low-cost starting material 2-naphthol. P1 molecules stack in one-dimensional columnar arrangement characteristic of strong intermolecular π-π interactions, contributing to the formation of a solution-processed, semicrystalline thin-film exhibiting one order of magnitude higher hole mobility than the amorphous one based on the state-of-the art hole-transporter, 2,2-7,7-tetrakis(N,N'-di-paramethoxy-phenylamine 9,9'-spirobifluorene (spiro-OMeTAD). PSCs employing P1 as the hole-transporting layer attain a high efficiency of 19.8 % at the standard AM 1.5 G conditions, and good long-term stability under continuous full sunlight exposure at 40 °C.

Theoretical study on the regioselective photoisomerization of asymmetric N,C-chelate organoboron compounds.

Herein, the complete active space self-consistent field (CASSCF) and its second-order perturbation (CASPT2) methods combined with time-dependent density functional theory (TD-DFT) calculations were employed to investigate the isomerization reaction mechanisms of an asymmetric N,C-chelate organoboron compound, B(ppy)MesPh, in the ground (S0) state and the first singlet excited (S1) state. Our calculations show that isomerizations proceed via different pathways in the S0 and S1 states,; however, the energy barriers for mesityl isomerization are higher than those for phenyl isomerization in both states; this is in good agreement with the experimentally observed regioselectivity (S. Wang, et al. Angew. Chem., Int. Ed., 2017, 56, 6093-6097). Photoisomerization is motivated by charge transfer from two phenyl rings to the pyridyl moiety and initiated by the cleavage of the B-Cppy bond, followed by the formation of a boracyclopropane ring via an (S1/S0)X conical intersection and a biradical intermediate. Both steric and electronic features were found to be important for regioselective photoisomerization. Our results not only shed light on the experimental observations, but also provide valuable details on the excited state dynamics of organoboron compounds and can facilitate further syntheses and applications.

Effect of π-bridge units on properties of A-π-D-π-A-type nonfullerene acceptors for organic solar cells.

Acceptor-π-donor-π-acceptor (A-π-D-π-A)-types of small molecules are very promising nonfullerene acceptors to overcome the drawbacks of fullerene derivatives such as the weak absorption ability and electronic adjustability. However, only few attempts have been made to develop π-bridge units to construct highly efficient acceptors in OSCs. Herein, taking the reported acceptor P1 as a reference, five small-structured acceptors (P2, P3, P4, P5, and P6) have been designed via the replacement of the π-bridge unit. A combination of quantum chemistry and Marcus theory approaches is employed to investigate the effect of different π-bridge units on the optical, electronic, and charge transport properties of P1-P6. The calculation results show that the designed molecules P2 and P5 can become potential acceptor replacements of P1 due to their red-shifted absorption bands, appropriate energy levels, low exciton binding energy, and high electron affinity and electron mobility. Additionally, compared with P3HT/P1, P3HT/P2 and P3HT/P5 exhibit stronger and wider absorption peaks, larger electron transfer distances (DCT), greater transferred charge amounts (Δq), and smaller overlaps (Λ), which shows that P2 and P5 have more significant electron transfer characteristics and favorable exciton dissociation capabilities for enhancing the short-circuit current density (JSC) and thus, they are potential acceptors in OSCs.

Theoretical study of non-Hammett vs. Hammett behaviour in the thermolysis and photolysis of arylchlorodiazirines.

Arylchlorodiazirines (ACDA) are thermal and photochemical precursors of carbenes that form these molecules via nitrogen elimination. We have studied this reaction with multireference quantum chemical methods (CASSCF and CASPT2) for a series of ACDA derivatives with different substitution at the aromatic ring. The calculations explain the different reactivity trends found in the ground and excited state, with good correlation between the calculated barriers and the experimental reaction rates. The ground state mechanism can be described as a reverse cycloaddition with small charge transfer from the aromatic ring to the diazirine moiety. This is consistent with the lack of correlation between the Hammett σ descriptors and the experimental rates. In contrast, the excited state reaction is the cleavage of a single C-N bond mediated by small barriers of 4-6 kcal mol-1. The reaction path goes through a conical intersection with the ground state, which facilitates radiationless decay and explains the disappearance of the transient absorption signal measured experimentally. This leads to a diazomethane intermediate that ultimately yields the carbene. Electronically, excitation to S1 is characterized initially by significant charge transfer from the phenyl ring to the diazirine. The charge transfer is reversed during the C-N cleavage reaction, and this explains the preferential stabilization of the excited-state minimum by polar solvents and electron-donating substituents. Therefore, our calculations reproduce and explain the relationship found experimentally between the Hammett σ+ parameters and the life time of S1 (Y. L. Zhang, et al. J. Am. Chem. Soc., 2009, 131, 16652-16653).

Effect of Water on the Structure and Stability of Hydrogen-Bonded Oxalic Acid Dimer.

As the simplest and most abundant dicarboxylic acid in the atmosphere, oxalic acid (OA) not only plays a key role in aerosol nucleation, but also acts as a prototypical compound for the investigation of intra- and intermolecular hydrogen-bonding interactions. A systematic theoretical study on the hydrated OA dimers performed by using DFT at the M06-2X/6-311++G(3df, 2p) level is discussed herein. The properties of hydrogen bonds in clusters are inspected through topological analysis by using atoms in molecules (AIM) theory. The most stable OA dimer involves a cyclic structure with two intermolecular hydrogen bonds. Calculations show that one H2 O has a slight effect on the hydrogen bonds, whereas two water molecules weaken and three water molecules break the two intermolecular hydrogen bonds between OAs. Furthermore, there are no hydrogen-bond interactions between OAs in almost all stable clusters as the number of H2 O molecules increases to four and five. Additionally, ionization and isomerization of OA through water-assisted proton-transfer phenomena are observed in tetra- and pentahydrates. This work provides new insights into the conversion of anhydrous OA into hydrated clusters that are helpful for further understanding the atmospheric nucleation process and nature of hydrogen bond.

Novel benzodithiophene-based polymer acceptors for efficient organic solar cells.

All polymer organic solar cells afford unique potentials due to the tunable chemical and electronic properties of both polymer donors and polymer acceptors. Compared with the rapid development of polymer donors, the development of polymer acceptors lags far behind. To seek high-performance polymer acceptors used in organic solar cells, based on the experimentally reported D-A polymer acceptor (NDI2OD-T2)n (P1), a series of novel acceptors, designated as (BDTNDI2OD-T2)n(P2), (BDTNDTI)n(P3), (BDTNDI2OD-Tz2)n(P4), and (BDTNDTzI)n(P5), were designed by introduction of a benzodithiophene (BDT) unit and the nitrogen atom in the bridged thiophene ring. The density functional theory (DFT) and time-dependent density functional theory (TDDFT) methods were applied to study the effect of the BDT unit and the nitrogen atom on the geometrical, optical, electronic, and charge transport properties. The obtained results show that incorporation of the electron-donating BDT unit into P1 and the replacement of a carbon atom by the nitrogen atom in the bridged thiophene ring are effective strategies to lower the lowest unoccupied molecular orbital (LUMO) energy and exciton binding energy, and enhance light-absorbing capacity and electron mobility. Moreover, among the investigated molecules, P2 and P5 exhibit stronger and broader light absorption, higher light absorption efficiency and exciton separation ability as well as electron mobility; therefore they are recommended as promising polymer acceptors for future high-efficiency organic solar cells.

Insights into the Thermal Eliminations and Photoeliminations of B,N-Heterocycles: A Theoretical Study.

Understanding the photochemistry of organoboron compounds is essential to expand optoelectronic applications. In this work, the complete active space self-consistent field (CASSCF) and its second-order perturbation (CASPT2) methods combining with density functional theory (DFT) have been employed to investigate the elimination mechanisms of compound 6,7-dihydro-54-benzo[d]pyrido[2,1-f][1,2]azaborininr (B4) on the ground state (S0) and the first excited state (S1). B4 is one of the 1,2-B,N-heterocycles that undergo competitive thermal elimination and photoelimination depending on the substitution groups on the B atom and the chelate backbone, thus providing a high-selectivity synthesis strategy for luminescent compounds. Since the energy barrier from B4 to BH3-pyrido[1,2-a]isoindole (D1) and pyrido[1,2-a]isoindole (A1) on the ground state is lower than that from B4 to 54-benzo[d]pyrido[2,1-f][1,2]azaborininr (C4), the retraction ring reaction is expected to proceed with larger probability than the H2 elimination upon heating. On the contrary, photoelimination of H2 may take place easily due to the almost barrierless pathway on the S1 state. Remarkably, we have located an energetically available conical intersection (S1/S0)X-1, which allows for ultrafast S1 → S0 decay and subsequently generation of C4. Our results not only throw light on the experimental observations of the selectivity of thermal elimination and photoelimination but also provide detailed information on the excited state as instructional implications for further synthesis and application of B,N-embedded aromatics.

How to regulate energy levels and hole mobility of spiro-type hole transport materials in perovskite solar cells.

Methoxyaniline-based organic small molecules with three-dimensional structure have been proven as the most promising hole conductor for state-of-the-art perovskite devices. A fundamental understanding of the electronic properties and hole transport behavior of spiro-CPDT analogues, which is dependent on the number and position of the -OCH3 groups, is significant for their potential applications as hole transport materials of perovskite solar cells. Our results from density functional theory calculations indicate that meta-substitution is more beneficial to reduce the highest occupied molecular orbital (HOMO) levels of molecules compared with ortho- and para-substitution. Furthermore, the hole mobility can be improved by ortho-substitution or mixed ortho- and para-substitution. Most interestingly, it is found that the improvement in hole mobility is at the expense of raising the HOMO level of spiro-CPDT analogues. These results can be useful in the process of designing and synthesizing excellent hole transport materials with suitable HOMO levels and high hole mobility.

Effects of water molecules on the chemical stability of MAGeI3 perovskite explored from a theoretical viewpoint.

The stability of perovskite in humid environments is one of the biggest obstacles for its potential applications in light harvesting and electroluminescent displays. Understanding the detailed degradation mechanism of MAGeI3 in moisture is a critical way to explore the practicability of MAGeI3 perovskite. In this study, we report a quantitative and systematic investigation of MAGeI3 degradation processes by exploring the effects of H2O molecules on the structural and electronic properties of the most stable MAGeI3(101) surface under various simulated environmental conditions with different water coverage based on first-principles calculations. The results show that H2O molecules can easily diffuse into the inner side of the perovskite and gradually corrode the structure as the number of H2O molecules increases. As a result of the interactions between perovskite and H2O molecules, a hydrated intermediate will be generated as the first step in the degradation mechanism; the perovskite will further decompose to HI and GeI2. In terms of one MAGeI3 molecule, it will be dissociated completely to GeI2 as a result of hydrolysis reactions with a minimum of 4H2O molecules. In addition, the degradation of the perovskite will also affect the electronic structure, causing a decrease in optical absorption across the visible region of the spectrum and a distinct deformation change in the crystal structure of the material. These findings further illustrate the degradation of the hydrolysis process of MAGeI3 perovskite in humid environments, which should be helpful to inspire experimentalists to take action to prolong the lifetimes of perovskite solar cells to achieve high conversion efficiency in their applications.

A new understanding towards the reactivity of DNA peroxy radicals.

The reactivity of thymine peroxy radicals in DNA and their fate are studied using the reliable DFT methods. The most accessible H1' abstraction by the C6-peroxyl once reported experimentally is effectively competitive to the crosslinking reaction between the C6-peroxyl and the C5 or C6 on the 5'-adjacent thymine base. The rare transfer of the ObH1' group to the C1' radical from the formed hydroperoxide happens with a very strong heat release. Afterwards, the parallel reactions including the H1' and H2' abstractions by the C6-alkoxyl in an inter-nucleotidyl manner lead to direct formation of thymine glycol. After the H1' abstraction by the C6-alkoxyl, the apyrimidinic site can be formed on C1' through effective N1-glycosidic bond rupture. The geometric rearrangements and the orbital interaction between the H donor and the σ-type H acceptor are used to explain the difference of the H2' abstraction barriers by C6-alkoxyl. Hence, new radical reaction paths for the formation of DNA oxidation products are suggested, which are strongly different from the previously suggested paths with the tetraoxide intermediate.

Mixed Ge/Pb perovskite light absorbers with an ascendant efficiency explored from theoretical view.

Organic-inorganic methylammonium lead halide perovskites have recently attracted great interest emerging as promising photovoltaic materials with a high 20.8% efficiency, but lead pollution is still a problem that may hinder the development and wide spread of MAPbI3 perovskites. To reduce the use of lead, we investigated the structures, electronic and optical properties of mixed MAGexPb(1-x)I3 theoretically by using density functional theory methods at different calculation levels. Results show that the mixed Ge/Pb perovskites exhibit a monotonic decrease evolution in band energy to push the band gap deeper in the near-infrared region and have a red shift optical absorption with an increased proportion of Ge. The results also indicate that lattice distortion and spin-orbit coupling (SOC) strength play important roles in the band gap behavior of MAGexPb(1-x)I3 by affecting the bandwidths of CBM and VBM. The calculations for short circuit current density, open circuit voltage, and theoretical power conversion efficiency suggest that mixed Ge/Pb perovskite solar cells (PSCs) with efficiency over 22% are superior to MAPbI3 and MAGeI3. And notably, MAGe0.75Pb0.25I3 is a promising harmless material for solar cells absorber with the highest theoretical efficiency of 24.24%. These findings are expected to be helpful for further rational design of nontoxic light absorption layer for high-performance PSCs.

A promising candidate with D-A-A-A architecture as an efficient sensitizer for dye-sensitized solar cells.

A series of metal-free organic dyes with electron-rich (D) and electron-deficient units (A) as π linkers have been studied theoretically by means of density functional theory (DFT) and time-dependent DFT calculations to explore the effects of π spacers on the optical and electronic properties of triphenylamine dyes. The results show that Dye 1 with a structure of D-A-A-A is superior to the typical C218 dye in various key aspects, including the maximum absorption (λmax =511 nm), the charge-transfer characteristics (D/Δq/t is 5.49 Å/0.818 e(-) /4.41 Å), the driving force for charge-carrier injection (ΔGinject =1.35 eV)/dye regeneration (ΔGregen =0.27 eV), and the lifetime of the first excited state (τ=3.1 ns). It is thus proposed to be a promising candidate in dye-sensitized solar cell applications.

The theoretical investigation on the 4-(4-phenyl-4-α-naphthylbutadieny)-triphenylamine derivatives as hole transporting materials for perovskite-type solar cells.

The electronic structures, optical properties and hole mobilities of 4-(4-phenyl-4-α-naphthylbutadieny)-triphenylamine and its five derivatives are investigated by density functional theory (DFT). The results show that the highest occupied molecular orbital (HOMO) of all molecules is almost fully delocalized throughout the whole molecule, and the substituents -N(CH3)2 and -C6H5 denoted as molecules 6 and 2, respectively, have the largest contribution to the HOMO, which is favorable for hole transfer integral and hole mobility. Spectrum analysis indicates that all molecules have large Stokes shifts based on absorption and emission spectra. In addition, it is found that the hole reorganization energy of all molecules is about 0.5 times compared to that of electrons, which implies that hole mobility is bigger than electron mobility. On the basis of predicted packing motifs, the hole mobilities (u) of all molecules are also obtained. The largest hole mobility of molecule 2 (0.1063 cm(2) V(-1) s(-1)) is found to be higher than that of other molecules due to the face-to-face stacking mode, which suggests that -C6H5 is a good substituent group for improving hole mobility compared to other electron releasing groups. We hope that our results will be helpful for the further rational molecular design and synthesis of novel hole transport materials (HTMs) for high performance perovskite-type solar cells.