RESUMEN
N-type Mg3 Sb2 -based thermoelectric materials show great promise in power generation due to their mechanical robustness, low cost of Mg, and high figure of merit (ZT) over a wide range of temperatures. However, their poor thermal stability hinders their practical applications. Here, MgB2 is introduced to improve the thermal stability of n-type Mg3 Sb2 . Enabled by MgB2 decomposition, extra Mg can be released into the matrix for Mg compensation thermodynamically, and secondary phases of MgâB compounds can kinetically prevent Mg diffusion along grain boundaries. These synergetic effects inhibit the formation of Mg vacancies at elevated temperatures, thereby enhancing the thermal stability of n-type Mg3 Sb2 . Consequently, the Mg3.05 (Sb0.75 Bi0.25 )1.99 Te0.01 (MgB2 )0.03 sample exhibits negligible variation in thermoelectric performance during the 120-hour continuous measurement at 673 K. Moreover, the ZT of n-type Mg3 Sb2 can be maintained by adding MgB2 , reaching a high average ZT of ≈1.1 within 300-723 K. An eight-pair Mg3 Sb2 -GeTe-based thermoelectric device is also fabricated, achieving an energy conversion efficiency of ≈5.7% at a temperature difference of 438 K with good thermal stability. This work paves a new way to enhance the long-term thermal stability of n-type Mg3 Sb2 -based alloys and other thermoelectrics for practical applications.
RESUMEN
The cyclization reactions of keto-hydroperoxide (KHP) radicals leading to the formation of keto cyclic ethers and OH radicals play an important role in low temperature combustion for hydrocarbon fuels or oxygenated hydrocarbon fuels. However, due to the lack of kinetic data of cyclization reactions of KHP radicals, researchers often derive high-pressure-limit rate constants of cyclization reactions of KHP radicals from analogous cyclization reactions of hydroperoxyl alkyl radicals during construction of the combustion mechanism. This study aims to systematically investigate the kinetics of cyclization reactions of KHP radicals involving short-to-large-sized radicals. The studied reactions are divided into 7 reaction classes, according to the size of the cyclic transition state, the conjugative effect (whether KHP radicals are resonance-stabilized or not), and the position of the carbonyl group (whether the carbonyl group is inside or outside of the reaction center). The isodesmic reaction method, in conjunction with transition state theory, is utilized for each reaction class to compute the energy barriers and high-pressure-limit rate constants at the DFT level. The study revealed that energy barriers calculated at the DFT level with correction by the isodesmic reaction method are close to the results from the benchmark CCSD(T) method. To develop more accurate rate rules, these reaction classes are further divided into subclasses based on the relative site of the OOH group with the carbonyl group, the type of carbon atoms where the OOH group is located, and the type of carbon atoms where the radical site is located. For each subclass, high-pressure-limit rate rules are derived by averaging the rate constants of reactions in the subclass, and it is found that the maximum absolute deviation of the energy barrier and the ratio of the largest rate constant to the smallest rate constant among reactions in each subclass are within chemical accuracy limits, indicating acceptable use of the developed rate rules. A comparison of the rate constants for cyclization reactions of KHP radicals with the values of analogous cyclization reactions of hydroperoxyalkyl radicals as provided in reported mechanisms is made. Additionally, a comparison is drawn between our developed rate rules for subclasses of the cyclization reactions of KHP radicals and the rate rules for analogous subclasses of cyclization reactions of hydroperoxyl alkyl radicals. These comparisons demonstrate significant differences and highlight the necessity for improved rate rules for cyclization reactions of KHP radicals to enhance the automatically generated combustion mechanisms for hydrocarbon and oxygenated hydrocarbon fuels.
RESUMEN
The two-dimensional sample entropy marks a significant advance in evaluating the regularity and predictability of images in the information domain. Unlike the direct computation of sample entropy, which incurs a time complexity of O(N2) for the series with N length, the Monte Carlo-based algorithm for computing one-dimensional sample entropy (MCSampEn) markedly reduces computational costs by minimizing the dependence on N. This paper extends MCSampEn to two dimensions, referred to as MCSampEn2D. This new approach substantially accelerates the estimation of two-dimensional sample entropy, outperforming the direct method by more than a thousand fold. Despite these advancements, MCSampEn2D encounters challenges with significant errors and slow convergence rates. To counter these issues, we have incorporated an upper confidence bound (UCB) strategy in MCSampEn2D. This strategy involves assigning varied upper confidence bounds in each Monte Carlo experiment iteration to enhance the algorithm's speed and accuracy. Our evaluation of this enhanced approach, dubbed UCBMCSampEn2D, involved the use of medical and natural image data sets. The experiments demonstrate that UCBMCSampEn2D achieves a 40% reduction in computational time compared to MCSampEn2D. Furthermore, the errors with UCBMCSampEn2D are only 30% of those observed in MCSampEn2D, highlighting its improved accuracy and efficiency.
RESUMEN
Electrochemical nitrate (NO3 - ) reduction reaction (NO3 - RR) is a potential sustainable route for large-scale ambient ammonia (NH3 ) synthesis and regulating the nitrogen cycle. However, as this reaction involves multi-electron transfer steps, it urgently needs efficient electrocatalysts on promoting NH3 selectivity. Herein, a rational design of Co nanoparticles anchored on TiO2 nanobelt array on titanium plate (Co@TiO2 /TP) is presented as a high-efficiency electrocatalyst for NO3 - RR. Density theory calculations demonstrate that the constructed Schottky heterostructures coupling metallic Co with semiconductor TiO2 develop a built-in electric field, which can accelerate the rate determining step and facilitate NO3 - adsorption, ensuring the selective conversion to NH3 . Expectantly, the Co@TiO2 /TP electrocatalyst attains an excellent Faradaic efficiency of 96.7% and a high NH3 yield of 800.0 µmol h-1 cm-2 under neutral solution. More importantly, Co@TiO2 /TP heterostructure catalyst also presents a remarkable stability in 50-h electrolysis test.
RESUMEN
Ammonia (NH3 ) is an indispensable feedstock for fertilizer production and one of the most ideal green hydrogen rich fuel. Electrochemical nitrate (NO3 - ) reduction reaction (NO3 - RR) is being explored as a promising strategy for green to synthesize industrial-scale NH3 , which has nonetheless involved complex multi-reaction process. This work presents a Pd-doped Co3 O4 nanoarray on titanium mesh (Pd-Co3 O4 /TM) electrode for highly efficient and selective electrocatalytic NO3 - RR to NH3 at low onset potential. The well-designed Pd-Co3 O4 /TM delivers a large NH3 yield of 745.6 µmol h-1 cm-2 and an extremely high Faradaic efficiency (FE) of 98.7% at -0.3 V with strong stability. These calculations further indicate that the doping Co3 O4 with Pd improves the adsorption characteristic of Pd-Co3 O4 and optimizes the free energies for intermediates, thereby facilitating the kinetics of the reaction. Furthermore, assembling this catalyst in a Zn-NO3 - battery realizes a power density of 3.9 mW cm-2 and an excellent FE of 98.8% for NH3 .
RESUMEN
Biodiesel is a promising, sustainable, and carbon-neutral fuel. However, studying its combustion mechanisms comprehensively, both theoretically and experimentally, presents challenges due to the complexity and size of its molecules. One significant obstacle in determining low-temperature oxidation mechanisms for biodiesel is the lack of kinetic parameters for the reaction class of intramolecular H-migration reactions of alkyl-ester peroxy radicals, labeled as R(CîO)OR'-OOË (where the 'dot' represents the radical). Current biodiesel combustion mechanisms often estimate these parameters from the analogous reaction class of intramolecular H-migration reactions of alkyl peroxy radicals in alkane combustion mechanisms. However, such estimations are imprecise and neglect the unique characteristics of the ester group. This research aims to explore the kinetics of the reaction class of H-migration reactions of methyl-ester peroxy radicals. The reaction class is divided into 20 subclasses based on the newly formed cycle size of the transition state, the positions of the peroxy radical and the transferred H atom, and the types of carbons from which the H atom is transferred. Energy barriers for each subclass are calculated by using the CBS-QB3//M06-2X/6-311++G(d,p) method. High-pressure-limit and pressure-dependent rate constants ranging from 0.01 to 100 atm are determined using the transition state theory and Rice-Ramsberger-Kassel-Marcus/master-equation method, respectively. It is noted that the pressure-dependent rate constants calculated for each individual isomerization channel could bring some uncertainties while neglecting the interconnected pathways. A comprehensive comparison is made between our values of selected reactions and high-level calculated values of the corresponding reactions reported in the literature. The small deviation observed between these values indicates the accuracy and reliability of the energy barriers and rate constants calculated in this study. Additionally, our calculated high-pressure-limit rate constants are compared with the corresponding values in combustion mechanisms of esters, which were estimated based on analogous reactions of alkyl peroxy radicals. These comparative analyses shed light on the significant impact of the ester group on the kinetics, particularly when the ester group is involved in the reaction center. Finally, the high-pressure-limit rate rule and pressure-dependent rate rule for each subclass are derived by averaging the rate constants of reactions in each subclass. The accurate and reasonable rate rules for methyl-ester peroxy radicals developed in this study play a crucial role in enhancing our understanding of the low-temperature oxidation mechanisms of biodiesel.
RESUMEN
The cyclization reactions of hydroperoxymethylester radicals are pivotal in low-temperature methyl-ester combustion but limited experimental and theoretical kinetic data pose challenges. Prior research has drawn upon analogous hydroperoxy alkyl radical cyclization reactions to approximate rate constants and might inaccurately represent ester group-specific behavior. This study systematically investigates these kinetics, accounting for ester group effects and computational complexities in large molecular systems. The reactions are categorized into 11 classes based on cyclic transition state size and -OOH/radical positions. Energy barriers and high-pressure-limit rate constants are calculated using the isodesmic reaction correction method, validated, and applied to 24 subclasses based on carbon sites connected to -OOH and radical moieties. Subclass high-pressure-limit rate rules are derived through averaging rate constants. Analysis reveals uncertainties within acceptable chemical accuracy limits, validating the reaction classification and rate rules. We conduct comparative analyses with values from analogous alkyl reactions in established mechanisms while comparing our results with the high-pressure-limit rate rules for analogous alkane reactions. These comparisons reveal notable disparities, emphasizing the ester group's influence and necessitating tailored ester-specific rate rules. These findings hold promise for improving automatic reaction mechanism generation, particularly for large methyl esters.
RESUMEN
The reactions of the concerted HO2 elimination from alkyl peroxy radicals and the ß-scission of the C-OOH bond from hydroperoxy alkyl radicals, which lead to the formation of olefins and HO2 radicals, are two important reaction classes that compete with the second O2 addition step of hydroperoxy alkyl radicals, which are responsible for the chain branching in the low-temperature oxidation of normal alkyl cycloalkanes. These two reaction classes are also believed to be responsible for the negative temperature coefficient behavior due to the formation of the relatively unreactive HO2 radical, which has the potential to inhibit ignition of normal alkyl cycloalkanes. In this work, the kinetics of the above two reaction classes in normal alkyl cycloalkanes are studied, where reactions in the concerted elimination class are divided into subclasses depending upon the types of carbons from which the H atom is eliminated and the positions of the reaction center (on the alkyl side chain or on the cycle), and the reactions in the ß-scission reaction class are divided into subclasses depending upon the types of the carbons on which the radical is located and the positions of the reaction center. Energy barriers by using quantum chemical methods at the CBS-QB3 level, high-pressure-limit rate constants by using canonical transition state theory, and pressure-dependent rate constants at pressures from 0.01 to 100 atm by using Rice-Ramsberger-Kassel-Marcus/Master Equation theory are calculated for a representative set of reactions from methyl cyclohexane to n-butyl cyclohexane in each subclass, from which high-pressure-limit rate rules and pressure-dependent rate rules for each subclass are derived from the average rate constants of reactions within each subclass. A comparison of the rate constants for the reactions in the two reaction classes calculated in this work is made with the rate constants of the same reactions from available mechanisms published in the literature, where most of the rate constants are approximately estimated from analogous reactions in alkanes or small alkyl cyclohexanes, and it is found that a large difference may exist between them, indicating that the present work, which provides more accurate kinetic parameters and reasonable rate rules for these reaction classes, can be helpful to construct higher-accuracy mechanism models for normal alkyl cyclohexane combustion.
RESUMEN
The hydroperoxy alkyl radicals are important intermediates in the low-temperature combustion for normal-alkyl cycloalkanes, and the cyclization reactions of hydroperoxy alkyl radicals to form cyclic ethers are responsible for a major fraction of the OH formation, which has the potential to promote ignition. In most of the previous modeling studies for normal-alkyl cycloalkane combustion, the kinetic data of the cyclization reactions in the detailed combustion mechanism were mainly taken from the analogous reactions in cyclohexane, methyl cyclohexane, and alkanes in published literature studies. In this work, the kinetics of the cyclization reaction class of hydroperoxy alkyl radicals in normal-alkyl cycloalkanes is studied, where the reaction class is divided into subclasses depending upon the ring size of the transition states, the types of the carbons on which the -OOH site is located and the types of the carbons on which the radical site is located, and the positions of the cyclization (on the alkyl side chain, on the cycle, or between the alkyl side chain and the cycle). Energy barriers and high-pressure-limit site rate constants and pressure-dependent rates for reactions in all subclasses are calculated, and rate rules for all subclasses are developed. The high-pressure-limit rate constants are determined from CBS-QB3 electronic structure calculations combined with canonical transition-state theory calculations, and pressure-dependent rate constants are calculated by using the Rice-Ramsberger-Kassel-Marcus/Master Equation theory at pressures varying from 0.01 to 100 atm. Comparisons of the rate constants for cyclization reactions of hydroperoxy alkyl cyclohexylperoxy radicals calculated in this work with the values of the corresponding reactions in some of the popular combustion mechanisms show that it is unreasonable to use the kinetic data of analogous reactions in alkanes, cyclohexanes, or smaller normal-alkyl cyclohexanes. Therefore, the accurate kinetic calculations and the construction of rate rules for normal-alkyl cycloalkanes are necessary and significant for the reliable modeling of the low-temperature combustion of normal-alkyl cyclohexanes.
RESUMEN
OBJECTIVE: Chinese hamster ovary (CHO) cells are the leading cell factories for producing recombinant proteins in the biopharmaceutical industry. In this regard, constraint-based metabolic models are useful platforms to perform computational analysis of cell metabolism. These models need to be regularly updated in order to include the latest biochemical data of the cells, and to increase their predictive power. Here, we provide an update to iCHO1766, the metabolic model of CHO cells. RESULTS: We expanded the existing model of Chinese hamster metabolism with the help of four gap-filling approaches, leading to the addition of 773 new reactions and 335 new genes. We incorporated these into an updated genome-scale metabolic network model of CHO cells, named iCHO2101. In this updated model, the number of reactions and pathways capable of carrying flux is substantially increased. CONCLUSIONS: The present CHO model is an important step towards more complete metabolic models of CHO cells.
Asunto(s)
Células CHO/metabolismo , Genoma/genética , Redes y Vías Metabólicas/genética , Modelos Biológicos , Biología de Sistemas/métodos , Animales , Cricetinae , Cricetulus , Proteínas Recombinantes/genética , Proteínas Recombinantes/metabolismoRESUMEN
The kinetic data of cyclopentadiene C5H6 oxidation reactions are significant for the construction of aromatics oxidation mechanism because cyclopentadiene C5H6 has been proved to be an important intermediate in the aromatics combustion. Kinetics for the elementary reactions on the potential energy surface (PES) relevant for the C5H6 + HO2 reaction are studied in this work. Stationary points on the PES are calculated by employing the CCSD(T)/cc-pVTZ//B3LYP/6-311G(d,p) level of theory. High-pressure limit and pressure-dependent rate constants for elementary reactions on this PES are calculated using conventional transition state theory (TST), variational transition-state theory (VTST) and Rice-Ramsberger-Kassel-Marcus/master equation (RRKM/ME) theory. In this work, the reaction channels for the C5H6 + HO2 reaction, which include H-abstraction channels from C5H6 by HO2 to form the C5H5 + H2O2 and the addition channels through well-skipping pathways to form the bimolecular products C5H7 + O2 or C5H6O + OH, or through C5H7O2 stabilization and its unimolecular decomposition to form the bimolecular products C5H7 + O2 or C5H6O + OH, namely sequential pathways, are studied. Also, the consuming reaction channels for the compounds C5H6O and C5H7 in the addition products are studied. The dominant reaction channels for these reactions are unraveled through comparing the energy barriers and rate constants of all elementary reactions and it is found: (1) HO2 addition to cyclopentadiene C5H6 is more important than direct H-abstraction. (2) in the HO2 addition channels, the well-skipping pathways and sequential pathways are competing and the well-skipping pathways will be favor in the higher pressures and the sequential pathways will be favor in the higher temperature. (3) The major consumption reaction channel for the five-member-ring compound C5H6O is the reaction channel to form C4H6 + CO and the major consumption reaction channel for the five-member-ring compound C5H7 is the reaction channel to form C3H5 + C2H2. High-pressure limit rate constants and pressure-dependent rate constants for elementary reactions on the PES are calculated, which will be useful in modeling the oxidation of aromatic compounds at low- and medium-temperatures.
RESUMEN
The genetic, proteomic, disease and pharmacological studies have generated rich data in protein interaction, disease regulation and drug activities useful for systems-level study of the biological, disease and drug therapeutic processes. These studies are facilitated by the established and the emerging computational methods. More recently, the network descriptors developed in other disciplines have become more increasingly used for studying the protein-protein, gene regulation, metabolic, disease networks. There is an inadequate coverage of these useful network features in the public web servers. We therefore introduced upto 313 literature-reported network descriptors in PROFEAT web server, for describing the topological, connectivity and complexity characteristics of undirected unweighted (uniform binding constants and molecular levels), undirected edge-weighted (varying binding constants), undirected node-weighted (varying molecular levels), undirected edge-node-weighted (varying binding constants and molecular levels) and directed unweighted (oriented process) networks. The usefulness of the PROFEAT computed network descriptors is illustrated by their literature-reported applications in studying the protein-protein, gene regulatory, gene co-expression, protein-drug and metabolic networks. PROFEAT is accessible free of charge at http://bidd2.nus.edu.sg/cgi-bin/profeat2016/main.cgi.
Asunto(s)
Biología Computacional/métodos , Enfermedad/clasificación , Redes Reguladoras de Genes , Redes y Vías Metabólicas , Preparaciones Farmacéuticas , Mapeo de Interacción de Proteínas , Programas Informáticos , Algoritmos , Bases de Datos de Proteínas , Humanos , Internet , Biología de Sistemas/métodosRESUMEN
The reactions of cycloaddition, intramolecular H-shift and concerted elimination of alkenyl peroxy radicals are three kinds of important reactions in the low temperature combustion of alkenes. In this study, the cycloaddition reactions are divided into classes considering endo-cycloaddition, exo-cycloaddition and the size of the transition states; the intramolecular H-shift reactions are divided into classes depending upon the ring size of the transition states and the type of C-H bonds from which the hydrogen atom is transferred; the concerted elimination reactions are divided into classes according to the type of H-CßCαOO bond that is broken. All geometry optimizations are performed at the B3LYP/6-31G(2df,p) level. With the electronic structure calculations being performed using the composite Gaussian-4 (G4) method, high pressure limit rate constants and pressure-dependent rate constants at pressures varying from 0.01 to 100 atm are calculated by using canonical transition state theory and the Rice-Ramsberger-Kassel-Marcus/master equation method, respectively. All rate constants are given in the form of the modified Arrhenius expression. The high pressure limit rate rules and the pressure-dependent rate rules are derived by averaging the rate constants of a representative set of reactions in each class. The results show that the rate rules for these three classes of reactions have a large uncertainty and the impact of the pressure on the rate constants increases as temperature increases.
RESUMEN
The isodesmic reaction method is applied to calculate the potential energy surface (PES) along the reaction coordinates and the rate constants of the barrierless reactions for unimolecular dissociation reactions of alkanes to form two alkyl radicals and their reverse recombination reactions. The reaction class is divided into 10 subclasses depending upon the type of carbon atoms in the reaction centers. A correction scheme based on isodesmic reaction theory is proposed to correct the PESs at UB3LYP/6-31+G(d,p) level. To validate the accuracy of this scheme, a comparison of the PESs at B3LYP level and the corrected PESs with the PESs at CASPT2/aug-cc-pVTZ level is performed for 13 representative reactions, and it is found that the deviations of the PESs at B3LYP level are up to 35.18 kcal/mol and are reduced to within 2 kcal/mol after correction, indicating that the PESs for barrierless reactions in a subclass can be calculated meaningfully accurately at a low level of ab initio method using our correction scheme. High-pressure limit rate constants and pressure dependent rate constants of these reactions are calculated based on their corrected PESs and the results show the pressure dependence of the rate constants cannot be ignored, especially at high temperatures. Furthermore, the impact of molecular size on the pressure-dependent rate constants of decomposition reactions of alkanes and their reverse reactions has been studied. The present work provides an effective method to generate meaningfully accurate PESs for large molecular system.
RESUMEN
Intramolecular H-migration reaction of hydroperoxyalkylperoxy radicals (â¢O2QOOH) is one of the most important reaction families in the low-temperature oxidation of hydrocarbon fuels. This reaction family is first divided into classes depending upon H atom transfer from -OOH bonded carbon or non-OOH bonded carbon, and then the two classes are further divided depending upon the ring size of the transition states and the types of the carbons from which the H atom is transferred. High pressure limit rate rules and pressure-dependent rate rules for each class are derived from the rate constants of a representative set of reactions within each class using electronic structure calculations performed at the CBS-QB3 level of theory. For the intramolecular H-migration reactions of â¢O2QOOH radicals for abstraction from an -OOH substituted carbon atom (-OOH bonded case), the result shows that it is acceptable to derive the rate rules by taking the average of the rate constants from a representative set of reactions with different sizes of the substitutes. For the abstraction from a non-OOH substituted carbon atom (non-OOH bonded case), rate rules for each class are also derived and it is shown that the difference between the rate constants calculated by CBS-QB3 method and rate constants estimated from the rate rules may be large; therefore, to get more reliable results for the low-temperature combustion modeling of alkanes, it is better to assign each reaction its CBS-QB3 calculated rate constants, instead of assigning the same values for the same reaction class according to rate rules. The intramolecular H-migration reactions of â¢O2QOOH radicals (a thermally equilibrated system) are pressure-dependent, and the pressure-dependent rate constants of these reactions are calculated by using the Rice-Ramsberger-Kassel-Marcus/master-equation theory at pressures varying from 0.01 to 100 atm. The impact of molecular size on the pressure-dependent rate constants of the intramolecular H-migration reactions of â¢O2QOOH radicals has been studied, and it is shown that the pressure dependence of the rate constants of intramolecular H-migration reactions of â¢O2QOOH radicals decreases with the molecular size at low temperatures and the impact of molecular size on the pressure-dependent rate constants decreases as temperature increases. It is shown that it is acceptable to derive the pressure-dependent rate rules by taking the average of the rate constants from a representative set of reactions with different sizes of the substitutes. The barrier heights follow the Evans-Polanyi relationship for each type of intramolecular hydrogen-migration reaction studied. All calculated rate constants are fitted by a nonlinear least-squares method to the form of a modified Arrhenius rate expression at pressures varying from 0.01 to 100 atm and at the high-pressure limit. Furthermore, thermodynamic parameters for all species involved in these reactions are calculated by the composite CBS-QB3 method and are given in NASA format.
RESUMEN
This study focuses on the studies of the main pressure-dependent reaction types of iso-octane (iso-C8H18) pyrolysis, including initial C-C bond fission of iso-octane, isomerization, and ß-scission reactions of the alkyl radicals produced by the C-C bond fission of iso-octane. For the C-C bond fission of iso-octane, the minimum energy potentials are calculated at the CASPT2(2e,2o)/6-31+G(d,p)//CAS(2e,2o)/6-31+G(d,p) level of theory. For the isomerization and the ß-scission reactions of the alkyl radicals, the optimization of the geometries and the vibrational frequencies of the reactants, transition states, and products are performed at the B3LYP/CBSB7 level, and their single point energies are calculated by using the composite CBS-QB3 method. Variable reaction coordinate transition state theory (VRC-TST) is used for the high-pressure limit rate constant calculation and Rice-Ramsperger-Kassel-Marcus/master equation (RRKM/ME) is used to calculate the pressure-dependent rate constants of these channels with pressure varying from 0.01-100 atm. The rate constants obtained in this work are in good agreement with those available from literatures. We have updated the rate constants and thermodynamic parameters for species involved in these reactions into a current chemical kinetic mechanism and also have improved the concentration profiles of main products such as C3H6 and C4H6 in the shock tube pyrolysis of iso-octane. The results of this study provide insight into the pyrolysis of iso-octane and will be helpful in the future development of branched paraffin kinetic mechanisms.
RESUMEN
The potential energy surface (PES) for reaction C2H4 + HO2 was examined by using the quantum chemical methods. All rates were determined computationally using the CBS-QB3 composite method combined with conventional transition state theory(TST), variational transition-state theory (VTST) and Rice-Ramsberger-Kassel-Marcus/master-equation (RRKM/ME) theory. The geometries optimization and the vibrational frequency analysis of reactants, transition states, and products were performed at the B3LYP/CBSB7 level. The composite CBS-QB3 method was applied for energy calculations. The major product channel of reaction C2H4 + HO2 is the formation C2H4O2H via an OH(···)π complex with 3.7 kcal/mol binding energy which exhibits negative-temperature dependence. We further investigated the reactions related to this complex, which were ignored in previous studies. Thermochemical properties of the species involved in the reactions were determined using the CBS-QB3 method, and enthalpies of formation of species were compared with literature values. The calculated rate constants are in good agreement with those available from literature and given in modified Arrhenius equation form, which are serviceable in combustion modeling of hydrocarbons. Finally, in order to illustrate the effect for low-temperature ignition of our new rate constants, we have implemented them into the existing mechanisms, which can predict ethylene ignition in a shock tube with better performance.
RESUMEN
We present a further interpretation of reaction class transition state theory (RC-TST) proposed by Truong et al. for the accurate calculation of rate coefficients for reactions in a class. It is found that the RC-TST can be interpreted through the isodesmic reaction method, which is usually used to calculate reaction enthalpy or enthalpy of formation for a species, and the theory can also be used for the calculation of the reaction barriers and reaction enthalpies for reactions in a class. A correction scheme based on this theory is proposed for the calculation of the reaction barriers and reaction enthalpies for reactions in a class. To validate the scheme, 16 combinations of various ab initio levels with various basis sets are used as the approximate methods and CCSD(T)/CBS method is used as the benchmarking method in this study to calculate the reaction energies and energy barriers for a representative set of five reactions from the reaction class: R(c)CH(R(b))CR(a)CH2 + OH(â¢) â R(c)C(â¢)(R(b))CR(a)CH2 + H2O (R(a), R(b), and R(c) in the reaction formula represent the alkyl or hydrogen). Then the results of the approximate methods are corrected by the theory. The maximum values of the average deviations of the energy barrier and the reaction enthalpy are 99.97 kJ/mol and 70.35 kJ/mol, respectively, before correction and are reduced to 4.02 kJ/mol and 8.19 kJ/mol, respectively, after correction, indicating that after correction the results are not sensitive to the level of the ab initio method and the size of the basis set, as they are in the case before correction. Therefore, reaction energies and energy barriers for reactions in a class can be calculated accurately at a relatively low level of ab initio method using our scheme. It is also shown that the rate coefficients for the five representative reactions calculated at the BHandHLYP/6-31G(d,p) level of theory via our scheme are very close to the values calculated at CCSD(T)/CBS level. Finally, reaction barriers and reaction enthalpies and rate coefficients of all the target reactions calculated at the BHandHLYP/6-31G(d,p) level of theory via the same scheme are provided.
RESUMEN
Solar-driven interfacial evaporation technology has become an effective approach to alleviate freshwater shortage. To improve its evaporation efficiency, the pore-size dependence of the water transport rate and evaporation enthalpy in the evaporator should be further investigated. Based on the transportation of water and nutrients in natural wood, we facilely designed a lignocellulose aerogel-based evaporator using carboxymethyl nanocellulose (CMNC) cross-linking, bidirectional freezing, acetylation, and MXene-coating. The pore size of the aerogel was adjusted by controlling its CMNC content. When the channel diameter of the aerogel-based evaporator increased from 21.6 to 91.9 µm, the water transport rate of the proposed evaporator increased from 31.94 to 75.84 g min-1, while its enthalpy increased from 1146.53 to 1791.60 kJ kg-1. At a pore size of 73.4 µm, the evaporation enthalpy and water transport rate of the aerogel-based evaporator achieved a balance, leading to the best solar evaporation rate (2.86 kg m-2 h-1). The evaporator exhibited excellent photothermal conversion efficiency (93.36%) and salt resistance (no salt deposition after three cycles of 8 h). This study could guide the development of efficient solar-driven evaporators for seawater desalination.
RESUMEN
Nitrite (NO2-), as a N-containing pollutant, widely exists in aqueous solution, causing a series of environmental and health problems. Electrocatalytic NO2- reduction is a promising and sustainable strategy to remove NO2-, meanwhile, producing high value-added ammonia (NH3). But the NO2- reduction reaction (NO2-RR) involves complex 6-electron transfer process that requires high-efficiency electrocatalysts to accomplish NO2--to-NH3 conversion. Herein, we report NiS2 nanoparticles decorated TiO2 nanoribbon array on titanium mesh (NiS2@TiO2/TM) as a fantastic NO2-RR electrocatalyst for ambient NH3 synthesis. When tested in NO2--containing solution, NiS2@TiO2/TM achieves a satisfactory NH3 yield of 591.9 µmol h-1 cm-2 and a high Faradaic efficiency of 92.1 %. Besides, it shows remarkable stability during 12-h electrolysis test.