Porcine Epidemic Diarrhea Virus nsp13 Protein Downregulates Neonatal Fc Receptor Expression by Causing Promoter Hypermethylation through the NF-κB Signaling Pathway.

Porcine epidemic diarrhea virus (PEDV) is a highly pathogenic porcine enteric coronavirus that causes severe watery diarrhea and even death in piglets. The neonatal Fc receptor (FcRn) is the only transport receptor for IgG. FcRn expressed by intestinal epithelial cells can transport IgG from breast milk to piglets to provide immune protection. Previous studies have shown that viral infection affects FcRn expression. In this study, we showed for the first time, to our knowledge, that FcRn expression can be influenced by methyltransferases. In addition, we found that PEDV inhibited FcRn protein synthesis in porcine small intestinal epithelial cells postinfection. Then, we found that PEDV interfered with the transcription of genes through aberrant methylation modification of the FcRn promoter. DNA methyltransferase 3b (DNMT3b) has been implicated in this process. Using a series of PEDV structural and nonstructural protein (nsp) expression plasmids, we showed that nsp13 plays an important role in this aberrant methylation modification. PEDV nsp13 can affect the NF-κB canonical pathway and promote DNMT3b protein expression by facilitating p65 protein binding to chromatin. PEDV caused aberrant methylation of the FcRn promoter via DNMT3b. The same phenomenon was found in animal experiments with large white piglets. IgG transcytosis demonstrated that PEDV nsp13 can inhibit bidirectional IgG transport by FcRn. In addition, the core region of nsp13 (230-597 aa) is critical for FcRn inhibition. Taken together, to our knowledge, our findings revealed a novel immune escape mechanism of PEDV and shed new light on the design and development of vaccines and drugs.

RNA m6A modification regulates L1 retrotransposons in human spermatogonial stem cell differentiation in vitro and in vivo.

The maintenance of genome integrity in the germline is crucial for mammalian development. Long interspersed element type 1 (LINE-1, L1) is a mobile genetic element that makes up about 17% of the human genome and poses a threat to genome integrity. N6-methyl-adenosine (m6A) plays an essential role in regulating various biological processes. However, the function of m6A modification in L1 retrotransposons and human germline development remains largely unknown. Here we knocked out the m6A methyltransferase METTL3 or the m6A reader YTHDF2 in human embryonic stem cells (hESCs) and discovered that METTL3 and YTHDF2 are crucial for inducing human spermatogonial stem cells (hSSCs) from hESCs in vitro. The removal of METTL3 or YTHDF2 resulted in increased L1 retrotransposition and reduced the efficiency of SSC differentiation in vitro. Further analysis showed that YTHDF2 recognizes the METTL3-catalyzed m6A modification of L1 retrotransposons and degrades L1 mRNA through autophagy, thereby blocking L1 retrotransposition. Moreover, the study confirmed that m6A modification in human fetal germ cells promotes the degradation of L1 retrotransposon RNA, preventing the insertion of new L1 retrotransposons into the genome. Interestingly, L1 retrotransposon RNA was highly expressed while METTL3 was significantly downregulated in the seminal plasma of azoospermic patients with meiotic arrest compared to males with normal fertility. Additionally, we identified some potentially pathogenic variants in m6A-related genes in azoospermic men with meiotic arrest. In summary, our study suggests that m6A modification serves as a guardian of genome stability during human germline development and provides novel insights into the function and regulatory mechanisms of m6A modification in restricting L1 retrotransposition.

Palmitoylation of vacuole membrane protein 1 promotes small extracellular vesicle secretion via interaction with ALIX and influences intercellular communication.

BACKGROUND: Small extracellular vesicles (EVs), exemplified by exosomes, mediate intercellular communication by transporting proteins, mRNAs, and miRNAs. Post-translational modifications are involved in controlling small EV secretion process. However, whether palmitoylation regulates small EV secretion, remains largely unexplored. METHODS: Vacuole Membrane Protein 1 (VMP1) was testified to be S-palmitoylated by Palmitoylation assays. VMP1 mutant plasmids were constructed to screen out the exact palmitoylation sites. Small EVs were isolated, identified and compared between wild-type VMP1 or mutant VMP1 transfected cells. Electron microscope and immunofluorescence were used to detect multivesicular body (MVB) number and morphology change when VMP1 was mutated. Immunoprecipitation and Mass spectrum were adopted to identify the protein that interacted with palmitoylated VMP1, while knock down experiment was used to explore the function of targeted protein ALIX. Taking human Sertoli cells (SCs) and human spermatogonial stem cell like cells (SSCLCs) as a model of intercellular communication, SSCLC maintenance was detected by flow cytometry and qPCR at 12 days of differentiation. In vivo, mouse model was established by intraperitoneal injection with palmitoylation inhibitor, 2-bromopalmitate (2BP) for 3 months. RESULTS: VMP1 was identified to be palmitoylated at cysteine 263,278 by ZDHHC3. Specifically, palmitoylation of VMP1 regulated its subcellular location and enhanced the amount of small EV secretion. Mutation of VMP1 palmitoylation sites interfered with the morphology and biogenesis of MVBs through suppressing intraluminal vesicle formation. Furthermore, inhibition of VMP1 palmitoylation impeded small EV secretion by affecting the interaction of VMP1 with ALIX, an accessory protein of the ESCRT machinery. Taking SCs and SSCLCs as a model of intercellular communication, we discovered VMP1 palmitoylation in SCs was vital to the growth status of SSCLCs in a co-culture system. Inhibition of VMP1 palmitoylation caused low self-maintenance, increased apoptosis, and decreased proliferation rate of SSCLCs. In vivo, intraperitoneal injection of 2BP inhibited VMP1 palmitoylation and exosomal marker expression in mouse testes, which were closely associated with the level of spermatogenic cell apoptosis and proliferation. CONCLUSIONS: Our study revealed a novel mechanism for small EV secretion regulated by VMP1 palmitoylation in Sertoli cells, and demonstrated its pivotal role in intercellular communication and SSC niche.

Operando unraveling photothermal-promoted dynamic active-sites generation in NiFe2O4 for markedly enhanced oxygen evolution.

The ability to develop highly active and low-cost electrocatalysts represents an important endeavor toward accelerating sluggish water-oxidation kinetics. Herein, we report the implementation and unraveling of the photothermal effect of spinel nanoparticles (NPs) on promoting dynamic active-sites generation to markedly enhance their oxygen evolution reaction (OER) activity via an integrated operando Raman and density functional theory (DFT) study. Specifically, NiFe2O4 (NFO) NPs are first synthesized by capitalizing on amphiphilic star-like diblock copolymers as nanoreactors. Upon the near-infrared light irradiation, the photothermal heating of the NFO-based electrode progressively raises the temperature, accompanied by a marked decrease of overpotential. Accordingly, only an overpotential of 309 mV is required to yield a high current density of 100 mA cm-2, greatly lower than recently reported earth-abundant electrocatalysts. More importantly, the photothermal effect of NFO NPs facilitates surface reconstruction into high-active oxyhydroxides at lower potential (1.36 V) under OER conditions, as revealed by operando Raman spectroelectrochemistry. The DFT calculation corroborates that these reconstructed (Ni,Fe)oxyhydroxides are electrocatalytically active sites as the kinetics barrier is largely reduced over pure NFO without surface reconstruction. Given the diversity of materials (metal oxides, sulfides, phosphides, etc.) possessing the photo-to-thermal conversion, this effect may thus provide a unique and robust platform to boost highly active surface species in nanomaterials for a fundamental understanding of enhanced performance that may underpin future advances in electrocatalysis, photocatalysis, solar-energy conversion, and renewable-energy production.

Tailoring electrocatalytic activity of in situ crafted perovskite oxide nanocrystals via size and dopant control.

Perovskite oxides (ABO3) have been widely recognized as a class of promising noble-metal-free electrocatalysts due to their unique compositional flexibility and structural stability. Surprisingly, investigation into their size-dependent electrocatalytic properties, in particular barium titanate (BaTiO3), has been comparatively few and limited in scope. Herein, we report the scrutiny of size- and dopant-dependent oxygen reduction reaction (ORR) activities of an array of judiciously designed pristine BaTiO3 and doped BaTiO3 (i.e., La- and Co-doped) nanoparticles (NPs). Specifically, a robust nanoreactor strategy, based on amphiphilic star-like diblock copolymers, is employed to synthesize a set of hydrophobic polymer-ligated uniform BaTiO3 NPs of different sizes (≤20 nm) and controlled compositions. Quite intriguingly, the ORR activities are found to progressively decrease with the increasing size of BaTiO3 NPs. Notably, La- and Co-doped BaTiO3 NPs display markedly improved ORR performance over the pristine counterpart. This can be attributed to the reduced limiting barrier imposed by the formation of -OOH species during ORR due to enhanced adsorption energy of intermediates and the possibly increased conductivity as a result of change in the electronic states as revealed by our density functional theory-based first-principles calculations. Going beyond BaTiO3 NPs, a variety of other ABO3 NPs with tunable sizes and compositions may be readily accessible by exploiting our amphiphilic star-like diblock copolymer nanoreactor strategy. They could in turn provide a unique platform for both fundamental and practical studies on a suite of physical properties (dielectric, piezoelectric, electrostrictive, catalytic, etc.) contingent upon their dimensions and compositions.

H9N2 Avian Influenza Virus Downregulates FcRY Expression in Chicken Macrophage Cell Line HD11 by Activating the JNK MAPK Pathway.

The H9N2 avian influenza virus causes reduced production performance and immunosuppression in chickens. The chicken yolk sac immunoglobulins (IgY) receptor (FcRY) transports from the yolk into the embryo, providing offspring with passive immunity to infection against common poultry pathogens. FcRY is expressed in many tissues/organs of the chicken; however, there are no reports investigating FcRY expression in chicken macrophage cells, and how H9N2-infected HD11 cells (a chicken macrophage-like cell line) regulate FcRY expression remains uninvestigated. This study used the H9N2 virus as a model pathogen to explore the regulation of FcRY expression in avian macrophages. FcRY was highly expressed in HD11 cells, as shown by reverse transcription polymerase chain reactions, and indirect immunofluorescence indicated that FcRY was widely expressed in HD11 cells. HD11 cells infected with live H9N2 virus exhibited downregulated FcRY expression. Transfection of eukaryotic expression plasmids encoding each viral protein of H9N2 into HD11 cells revealed that nonstructural protein (NS1) and matrix protein (M1) downregulated FcRY expression. In addition, the use of a c-jun N-terminal kinase (JNK) activator inhibited the expression of FcRY, while a JNK inhibitor antagonized the downregulation of FcRY expression by live H9N2 virus, NS1 and M1 proteins. Finally, a dual luciferase reporter system showed that both the M1 protein and the transcription factor c-jun inhibited FcRY expression at the transcriptional level. Taken together, the transcription factor c-jun was a negative regulator of FcRY, while the live H9N2 virus, NS1, and M1 proteins downregulated the FcRY expression through activating the JNK signaling pathway. This provides an experimental basis for a novel mechanism of immunosuppression in the H9N2 avian influenza virus.

The change of state-trait anxiety among patients undergoing orthognathic surgery: A longitudinal study.

INTRODUCTION: This study aimed to assess state-trait anxiety level changes in Chinese patients with dentofacial discrepancies before and after orthognathic surgery and to explore the feasibility of developing a reference index for the preoperative screening of postoperative patients with high anxiety. METHODS: A total of 96 Chinese patients with dentofacial discrepancies who underwent orthognathic surgery were included in this study. Data were collected before orthognathic surgery and at 2 weeks (T2), 3 months, and 6 months (T4) after surgery using the State-Trait Anxiety Inventory. Receiver operating characteristic and linear regression analyses were performed to screen for preoperative indicators of postoperative high-state anxiety. RESULTS: State-trait anxiety levels in patients with dentofacial discrepancies decreased after surgery (F = 18.95, P <0.01; F = 6.90, P <0.01). Trait Anxiety Inventory can be used to screen patients with high-state anxiety from T2 to T4 (area under cover 95% confidence interval: T2, 0.74 [0.62-0.86]; 3 months, 0.79 [0.69-0.90]; T4, 0.77 [0.66-0.87], P <0.01), corresponding to cutoff values of 48.5, 46.5, and 45.5, respectively. CONCLUSIONS: All participants' state-trait anxiety levels improved after surgery compared with their preoperative levels. Preoperative trait anxiety levels can be used as a reference indicator to screen patients who may have high-state anxiety levels after orthognathic surgery. The creation of a screening scale will assist health care professionals to more pertinently help patients with high anxiety.

[Mandibular condyle localization in orthognathic surgery based on mandibular movement trajectory and its preliminary accuracy verification].

OBJECTIVE: To establish and assess the precision of pre-surgical condyle position planning using mandibular movement trajectory data for orthognathic surgery. METHODS: Skull data from large-field cone beam computed tomography (CBCT) and dental oral scan data were imported into IVSPlan 1.0.25 software for 3D reconstruction and fusion, creating 3D models of the maxilla and mandible. Trajectory data of mandibular movement were collected using a mandibular motion recorder, and the data were integrated with the jaw models within the software. Subsequently, three-dimensional trajectories of the condyle were obtained through matrix transformations, rendering them visually accessible. A senior oral and maxillofacial surgeon with experience in both diagnosis and treatment of temporomandibular joint disease and orthognathic surgery selected the appropriate condyle position using the condyle movement trajectory interface. During surgical design, the mobile mandibular proximal segment was positioned accordingly. Routine orthognathic surgical planning was completed by determining the location of the mandibular distal segment, which was based on occlusal relationships with maxilla and facial aesthetics. A virtual mandible model was created by integrating data from the proximal and distal segment bone. Subsequently, a solid model was generated through rapid prototyping. The titanium plate was pre-shaped on the mandibular model, and the screw hole positions were determined to design a condylar positioning guide device. In accordance with the surgical plan, orthognathic surgery was performed, involving mandibular bilateral sagittal split ramus osteotomy (SSRO). The distal segment of the mandible was correctly aligned intermaxillary, while the proximal bone segment was positioned using the condylar positioning guide device and the pre-shaped titanium plate. The accuracy of this procedure was assessed in a study involving 10 patients with skeletal class Ⅱ malocclusion. Preoperative condyle location planning and intraoperative positioning were executed using the aforementioned techniques. CBCT data were collected both before the surgery and 2 weeks after the procedure, and the root mean square (RMS) distance between the preope-rative design position and the actual postoperative condyle position was analyzed. RESULTS: The RMS of the condyle surface distance measured was (1.59±0.36) mm (95%CI: 1.35-1.70 mm). This value was found to be significantly less than 2 mm threshold recommended by the expert consensus (P < 0.05). CONCLUSION: The mandibular trajectory may play a guiding role in determining the position of the mandibular proximal segment including the condyle in the orthognathic surgery. Through the use of a condylar positioning guide device and pre-shaped titanium plates, the condyle positioning can be personalized and customized with clinically acceptable accuracy.

Evaluation of soft tissue prediction accuracy for orthognathic surgery with skeletal class III malocclusion using maxillofacial regional aesthetic units.

OBJECTIVES: This study aimed to evaluate the soft tissue prediction accuracy of patients undergoing orthognathic surgery to correct skeletal class III malocclusion using maxillofacial regional aesthetic units. MATERIALS AND METHODS: Pre- and postoperative cone-beam computed tomography (CBCT) and 3D facial scans were taken for 58 patients who had undergone orthognathic surgery. The preoperative 3D facial scan was integrated with the preoperative CBCT using ProPlan CMF software. The software simulated the surgery and generated postoperative soft tissue prediction. The simulated 3D facial scan was then compared with the actual 3D facial scan obtained at least 6 months after the surgery by the maxillofacial regional aesthetic units and the facial soft tissue landmark points. RESULTS: The anatomical regions of the upper lip, lower lip, chin, right external buccal and left external buccal prediction were above 2.0 mm. As for the soft tissue landmarks, at chl, chr, ls, stm and li, the position of predicted scan was higher than that of the actual postoperative scan. CONCLUSIONS: The accuracy of 3D soft tissue predictions using ProPlan CMF software in Skeletal III patients was clinically satisfactory according to maxillofacial regional aesthetic units combined with facial soft tissue landmark points. However, the accuracy of prediction still needed improvement in some areas. CLINICAL RELEVANCE: The accuracy of soft tissue prediction can be analyzed more clearly through maxillofacial regional aesthetic units so that clinicians have a deeper understanding of the use of the software to predict soft tissue change after orthognathic surgery.

Morphological Changes in Total and Inferior Part of Maxillary Sinus After Le Fort I Osteotomy, as Determined by Cone-Beam Computed Tomography.

To investigate morphological changes of the total and inferior part of the maxillary sinus following Le Fort I osteotomy. 21 skeletal class II and 49 skeletal III patients who underwent orthognathic surgery were enrolled in this retrospective study. Cone-beam computed tomography taken before (T1) and 6 to 24 months after (T2) orthognathic surgery were imported into Mimics 20.0 software to analyze morphological changes of the total and inferior part of the maxillary sinus. Volume of the whole maxillary sinus was significantly reduced after surgery ( P ≤0.008), while the volume of the inferior part of the maxillary sinus was significantly greater than before surgery ( P ≤0.004). Maxillary sinus floor moved occlusally after Le Fort I osteotomy. Movement in the pitch direction of the posterior maxilla affected the state of the maxillary sinus mucosa after orthognathic surgery. Le Fort I osteotomy exerts a significant impact on the morphology of the total and inferior part of the maxillary sinus.

Early and 1-year postsurgical stability and its factors in patients with complicated skeletal Class â ¢ malocclusion treated by conventional and surgery-first approach: A prospective cohort study.

INTRODUCTION: This study aimed to compare postsurgical stability between conventional (CSA) and surgery-first (SFA) approaches and investigate its prognostic factors in patients with a skeletal Class Ⅲ extraction. METHODS: Twenty and 19 patients treated with LeFort I osteotomy and bilateral sagittal split ramus osteotomy (BSSRO) with premolar extraction were enrolled in SFA and CSA groups, respectively. Serial cone-beam computed tomography images obtained before surgery, immediately after surgery (T1), 3 months after surgery, and 12 months after surgery were used for 3-dimensional quantitative analysis. The condyle was segmented for analyzing volumetric changes. Repeated measures analysis of variance, independent t test, and chi-square test were used to compare time-course and intergroup differences. Pearson and Kendall correlation and multivariate linear regression analyses were used to explore prognostic factors affecting skeletal stability. RESULTS: In both CSA and SFA, postsurgical relapse mainly occurred in the mandible sagittal and vertical dimensions and during the first 3 months after surgery. Stability in SFA was significantly less than that in CSA. Intraoperatively, inferolateral condylar displacement with proximal segment inwards, clockwise rotation, and return movements after surgery were observed regardless of the treatment approach. The condylar volume remained stable over time. Multivariate regression analysis showed that posterior vertical dimension (VD) at T1 (-1.63 mm), surgical amount of mandibular setback (-10.33 mm), surgical condylar downwards displacement (-1.28 mm), and anterior overjet at T1 (6.43 mm) were the most important predictors of early mandibular relapse (r2 = 0.593). CONCLUSIONS: The risk of early relapse could be reduced by controlling the anterior, middle, and posterior constraints provided by the prediction model.

Mitigating speckle noise in a laser Doppler vibrometer using Fourier analysis.

We propose two strategies for eliminating the speckle noise in a laser Doppler vibrometer according to Fourier analysis. Fourier transform is theoretically conducted on the speckle pattern phases, whose variation dominantly contributes to the speckle noise. The calculated and experimental frequency spectra of speckle noise both present oscillations of the frequency series (frequency peaks have constant intervals). (1) A low-pass filter can remove the noise if the vibration frequency is far lower than the first frequency peak of the noise. (2) The vibration energy can be revealed by removing the oscillating frequency trend. Physical experiments demonstrate the effectiveness of both despeckling strategies.

Optimization of the Extraction of Total Phenols from Medicago sativa and Its Antioxidant Capacity.

The phenolic compounds from alfalfa (Medicago sativa L.) are used as antioxidants and in native medicine. They play an indispensable role in defense and signal transduction of the plant under stress conditions. This exploration of the optimal extraction parameters of the total phenols from alfalfa by using ultrasonic-assisted extraction (UAE) was aimed at providing a theoretical basis for better utilization of the total phenols in alfalfa. In this study, the effects of solvent volume fraction (A), extraction time (B), solid-liquid ratio (C) and extraction temperature (D) on the total phenols content and the total antioxidant capacity of Medicago sativa L. WL363HQ after thrips infestation were determined through single-factor experiments. Additionally, the extraction conditions of total phenols were optimized by using Box-Behnken design (BBD) of response surface methodology (RSM). The results showed that the proposed model had a good fitting degree for total phenols extraction (R2 =0.9564). The total phenols extraction from WL363HQ had significant relationship with solid-liquid ratio (C) and extraction temperature (D) (P<0.05). The influence levels of the four factors on total phenols extraction were as follows: extraction temperature (D) > solid-liquid ratio (C)>acetone volume fraction (A)>extraction time (B). The optimum extraction conditions of total phenols from WL363HQ were 50 % acetone, solid-liquid ratio of 1 : 20 (g/mL), extraction time of 45 min and extraction temperature of 60 °C. The corresponding content and total antioxidant capacity under the optimized conditions were 15.76 mg g-1 and 28.79 µmol Trolox g-1 . These results provided a new extraction method of total phenols from alfalfa.

Lateral Pterygoid Muscle Ossification After Intraoral Condylectomy.

PURPOSE: Lateral pterygoid muscle ossification has not been reported in condylectomy patients. This study aimed to explore the incidence, risk factors, and imaging characteristics of 38 cases with lateral pterygoid muscle ossification among 54 patients after condylectomy via intraoral approach. METHODS: This retrospective study included 54 patients following simultaneous orthognathic surgery and condylectomy with coronoid process resection via intraoral approach. The authors evaluated the preoperative, 1 week, 6 months, and 1 year or more postoperative computed tomographic (CT) scans for the presence of lateral pterygoid muscle ossification and its characteristics. Sex, age at the time of surgery, disease course, affected side, preoperative alkaline phosphatase, pathology diagnosis, the height of the removed condyle, condylar shape, operator, preoperative temporomandibular joint movement, and clinical symptoms were assessed as risk factors for ossification. RESULTS: No incidence of lateral pterygoid muscle ossification was found on preoperative CT images. Various small-size osseous masses were observed in the lateral pterygoid muscles on postoperative 6 months CT images in 38/54 patients (70.37%) after condylectomy. But no apparent enlargement of the osseous masses was found. No patients complained of clinical discomfort or functional disorder during the follow-up period (23.11 ± 13.16 months). No significant risk factors for ossification were found. CONCLUSIONS: Lateral pterygoid muscle ossification is relatively common in patients after condylectomy via intraoral approach. However, its enlargement is self-limited and remains stable 6 months after surgery. it has no adverse effects on the temporomandibular joint functional movement.

Lithium-Conducting Branched Polymers: New Paradigm of Solid-State Electrolytes for Batteries.

The past decades have witnessed rapid development of lithium-based batteries. Significant research efforts have been progressively diverted from electrodes to electrolytes, particularly polymer electrolytes (PEs), to tackle the safety concern and promote the energy storage capability of batteries. To further increase the ionic conductivity of PEs, various branched polymers (BPs) have been rationally designed and synthesized. Compared with linear polymers, branched architectures effectively increase polymer segmental mobility, restrain crystallization, and reduce chain entanglement, thereby rendering BPs with greatly enhanced lithium transport. In this Mini Review, a diversity of BPs for PEs is summarized by scrutinizing their unique topologies and properties. Subsequently, the design principles for enhancing the physical properties, mechanical properties, and electrochemical performance of BP-based PEs (BP-PEs) are provided in which the ionic conduction is particularly examined in light of the Li+ transport mechanism. Finally, the challenges and future prospects of BP-PEs in this rapidly evolving field are outlined.

Three-Dimensional Dynamic Analysis of the Reproducibility of Verbal and Nonverbal Facial Expressions.

OBJECTIVE: The aim of this study is to compare the short- and long-term reproducibility of verbal and nonverbal facial expressions of normal people using dynamic 3-dimensional (3-D) imaging. DESIGN: Prospective, cross-sectional, controlled study. SETTING: Peking University School and Hospital of Stomatology, Beijing, China. PATIENTS AND PARTICIPANTS: Twenty-seven participants, 12 males and 15 females, were recruited for this study. METHODS: A 3-D dynamic system was applied to capture the process of 4 nonverbal facial expressions (smile lips closed, smile lips open, lip purse, cheek puff) and 2 verbal facial expressions (/i:/, /u:/) at an initial time point, 15 minutes later, and 1 week later. Key frames were selected from each expression recording sequence. MAIN OUTCOME MEASURES: The root mean square (RMS) between each key frame and its corresponding frame at rest was calculated. ΔRMS reflected the difference of the same key frames between the different sessions of the same expression of the same participant. The reproducibility of different facial expressions at different time intervals were analyzed. RESULTS: There was no significant difference in verbal and nonverbal expression repeatability during a 15-minute interval, except for cheek puff motion. Following a 1-week interval, verbal expression repeatability was superior to that of nonverbal expressions (P < .01). Compared with nonverbal expressions, the repeatability of verbal expressions did not obviously decrease with the increase in recording interval. CONCLUSIONS: Dynamic 3-D imaging is a useful technique for facial expression analysis. Verbal expressions showed greater reproducibility than nonverbal expressions.

Epigenetic regulation of mRNA N6-methyladenosine modifications in mammalian gametogenesis.

N6-methyladenosine (m6A) is the most prevalent epigenetic modification of mRNAs and broadly influences various biological processes by regulating post-transcriptional gene expression in eukaryotes. The reversible m6A modification is catalyzed by methyltransferases, METTL3 and METTL14 (writers), removed by the demethylases FTO and ALKBH5 (erasers) and recognized by m6A-binding proteins, namely the YTH domain-containing family of proteins (readers). Both m6A modification and the related enzymes are involved in the regulation of normal gametogenesis and embryonic development in many species. Recent studies showed that loss of m6A compromises gamete maturation, sex hormone synthesis, fertility and early embryonic development. In this review, we have summarized the most recent findings on the role of mRNA m6A modification in mammalian gametogenesis to emphasize the epigenetic regulation of mRNA in the reproductive system.

Isolation, identification and biological characteristics of Mycoplasma bovis in yaks.

Mycoplasma bovis (M. bovis) is one of the important pathogens which may cause bovine respiratory disease syndrome (BRDS), and results in huge economic losses for yaks (Bos gaurus) breeding industry. However, there is limited information about M. bovis in yaks. In our study, 145 nasal mucus samples from yaks with pneumonia were collected to clarify. Bacteriological determination was carried out through biochemical identification and Polymerase Chain Reaction (PCR) detection. And ten strains of Mycoplasma bovis (M. bovis) were found from collected samples. Then, the growth curve of isolated strains was determined by the change of optical density (OD630), pH value and Color Change Cnit (CCU). K-B disk method was also used for antimicrobial susceptibility testing. Results of colony morphology and biochemical testing were consistent with the biological characters of M. bovis. The nucleotide sequences of uvrC specific gene and 16S rRNA gene among the 10 strains were highly homologous. The growth curve assay showed that the isolates cultured in PPLO medium were in lag phase for 24 h, entered stable period in 42 h, and entered decline phase after 78 h. The isolates were found resistant to macrolides, aminoglycosides and lincomycin at various degrees, but they were sensitive or moderately sensitive to doxycycline and kanamycin under antimicrobial susceptibility analysis. In conclusion, the results provided certain reference for the follow-up research and guiding for the treatment of M. bovis in yaks.

Preoperative Ultrasound-Guided Trigeminal Nerve Block in Orthognathic Surgery: A Prospective Study About Its Efficacy of Intraoperative Anesthetic Dosage and Postoperative Analgesia.

PURPOSE: Ultrasound-guided trigeminal nerve block is rarely used in orthognathic surgery, and its impact of postoperative analgesia and the auxiliary effect on hypotensive anesthesia have not been fully reported. The purpose of this study is to measure the efficacy of ultrasound-guided trigeminal nerve block on intraoperative anesthetic dosage and postoperative analgesia. PATIENTS AND METHODS: In this single-blind, prospective, controlled trial, all patients were randomly assigned to 2 groups (n = 21/group): GEA group (general anesthesia) and TNB group (ultrasound-guided trigeminal nerve block [UGTNB] with general anesthesia). The primary variable was postoperative pain (visual analog scale scores, VAS scores) at postoperative 2, 4, 6, 12, and 24 hours. Satisfaction with postoperative pain management during postoperative 24 hours; the number of patients with moderate-to-severe pain (VAS score: >3) at postoperative 2, 4, 6, 12, 24 hours; and the consumption of opioids and nicardipine intraoperatively, etc. were secondary variables. Data were analyzed using the unpaired t, χ2, and Wilcoxon nonparametric tests. RESULTS: In this study, 40 patients at the Peking University School and Hospital of Stomatology between January 2019 to March 2019 were included with a mean age of 24.13 ± 5.07 for statistical analysis and 37.5% were male. Compared to GEA group, the TNB group had a significantly lower VAS scores at postoperative 6 hours and 12 hours, which were 2[0,2] and 0[0,2], respectively. Furthermore, patients in TNB group were more satisfied with pain management at postoperative 24 hours than patients in GEA group (5[4,5] vs 4[3,5]; P = .03). Statistically less amount of opioids and nicardipine in TNB group were used intraoperatively (P < .01). CONCLUSION: UGTNB use in orthognathic surgery may improve analgesia in the 24 hours after the operation, additionally, facilitate hypotensive anesthesia with fewer agents and fewer adverse effects postoperatively.

The Chinese version of Orthognathic Quality of Life Questionnaire (OQLQ-C): translation, reliability, and validity.

OBJECTIVES: The aims of this study were to describe the development of a Chinese version of the Orthognathic Quality of Life Questionnaire (OQLQ) and examine its reliability and validity. METHODS: The original English version of the OQLQ was translated into Chinese (OQLQ-C) by a forward-backward translation method. Psychometric evaluation of the OQLQ-C was carried out on a sample of 126 patients with dentofacial deformities. Reliability of the OQLQ-C was determined by means of internal consistency and test-retest methods, while validity was ascertained by content validity and construct validity. RESULTS: Internal consistency for total OQLQ-C score was 0.932 (Cronbach's alpha), and the test-retest reliability was 0.913 (Spearman correlation coefficient). Content validity of OQLQ-C was supported by content validity index (CVI) with scale-level (S-CVI) of 0.99 and item-level (I-CVI) of 0.875 to 1. The OQLQ-C was distributed to 4 different factors, and the total variance explained was 67.049%. CONCLUSIONS: The Chinese version of the OQLQ demonstrated acceptable reliability and good validity in patients with dentofacial deformities. CLINICAL RELEVANCE: These findings enable assessments of oral health-related quality of life in Chinese literate patients with dentofacial disorders. TRIAL REGISTRATION: ChiCTR1900028206.