Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 5 de 5
Filtrar
Más filtros

Bases de datos
Tipo de estudio
Tipo del documento
Asunto de la revista
País de afiliación
Intervalo de año de publicación
1.
Opt Express ; 29(13): 19384-19391, 2021 Jun 21.
Artículo en Inglés | MEDLINE | ID: mdl-34266048

RESUMEN

Room-temperature plasmonic-crystal lasers have been demonstrated with a square-lattice gold nano-pillar arrays on top of InGaAs/GaAs quamtum wells on a GaAs substrate. The lasing wavelength is tunable in the range of 865-1001 nm by varying the lattice period. The lasers exhibit an extremely narrow linewidth and small divergence angle so could have great potential for various applications. An unexpected mirror cavity effect has been observed and investigated. The mirror-cavity lasers have a very low threshold and could be developed to realize electrically-driven plasmonic lasers.

2.
Opt Express ; 26(10): 13483-13488, 2018 May 14.
Artículo en Inglés | MEDLINE | ID: mdl-29801373

RESUMEN

We investigate threshold current temperature dependence of electrically injected quantum-dot (QD) photonic crystal (PC) surface-emitting lasers (SELs) with respect to wavelength detuning between QD gain peak and PC cavity resonance. The lasing emissions cover wavelengths from 1283 nm to 1318 nm. Almost infinite characteristic temperature is realized at certain temperature range for PCSEL with large negative gain-cavity detuning. Moreover, band-edge lasing mode is identified in our "PC slab-on-substrate" structure, and its far-field distribution is characterized as doughnut-shaped beam with azimuthal polarization.

3.
Opt Express ; 20(4): 3941-7, 2012 Feb 13.
Artículo en Inglés | MEDLINE | ID: mdl-22418150

RESUMEN

Low threshold and widely tunable InAs/GaAs quantum-dot lasers are implemented with grating-coupled external-cavity arrangement. Throughout the tuning range of 130 nm, from 1160 to 1290 nm, the threshold current density is not more than 0.9 kA/cm2 and no noticeable threshold jump is observed. For a shorter-cavity device, the injection current is kept at a record low value of 90 mA but the tuning range is further extended to 150 nm, from 1143 to 1293 nm. The effect of cavity length on the tuning characteristics is discussed and the strategy for design and optimization of multilayer quantum-dot structure is also proposed.

4.
Micromachines (Basel) ; 12(5)2021 Apr 21.
Artículo en Inglés | MEDLINE | ID: mdl-33919126

RESUMEN

Photonic-crystal (PC) surface-emitting lasers (SELs) with double-hole structure in the square-lattice unit cell were fabricated on GaSb-based type-I InGaAsSb/AlGaAsSb heterostructures. The relative shift of two holes was varied within one half of the lattice period. We measured the lasing wavelengths and threshold pumping densities of 16 PC-SELs and investigated their dependence on the double-hole shift. The experimental results were compared to the simulated wavelengths and threshold gains of four band-edge modes. The measured lasing wavelength did not exhibit switching of band-edge mode; however, the calculated lowest threshold mode switched as the double-hole shift exceeded one quarter of the lattice period. The identification of band-edge lasing mode revealed that modal gain discrimination was dominated over by its mode wavelength separation.

5.
Micromachines (Basel) ; 10(3)2019 Mar 14.
Artículo en Inglés | MEDLINE | ID: mdl-30875813

RESUMEN

We study the effect of etching depth on the threshold characteristics of GaSb-based middle infrared (Mid-IR) photonic-crystal surface-emitting lasers (PCSELs) with different lattice periods. The below-threshold emission spectra are measured to identify the bandgap as well as band-edge modes. Moreover, the bandgap separation widens with increasing etching depth as a result of enhanced diffraction feedback coupling. However, the coupling is nearly independent of lattice period. The relationship between threshold gain and Bragg detuning is also experimentally determined for PCSELs and is similar to that calculated theoretically for one-dimensional distributed feedback lasers.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA