RESUMEN
Silver thiolate nanoclusters (Ag NCs) show distinctive optical properties resulting from their hybrid nature, metallic and molecular, exhibiting size-, structure-, and surface-dependent photoluminescence, thus enabling the exploitation of Ag NCs for potential applications in nanobiotechnology, catalysis, and biomedicine. However, tailoring Ag NCs for specific applications requires achieving long-term stability and may involve modifying surface chemistry, fine-tuning ligand composition, or adding functional groups. In this study, we report the synthesis of novel Ag NCs using 2-ethanephenylthiolate (SR) as a ligand, highlight critical points addressing stability, and characterize their optical and structural properties. A preliminary electrical characterization revealed high anisotropy, well suited for potential use in electronics/sensing applications. We also present the synthesis and characterization of Ag NCs using 10-carboxylic 2-ol thiolate (SR'COOH) having a terminal carboxylic group for conjugation with amine-containing molecules. We present a preliminary assessment of its bioconjugation capability using bovine serum albumin as a model protein indicating its prospective application as a biomolecule support.
Asunto(s)
Plata , Plata/química , LigandosRESUMEN
Graphene and related 2D material (GRM) thin films consist of 3D assembly of billions of 2D nanosheets randomly distributed and interacting via van der Waals forces. Their complexity and the multiscale nature yield a wide variety of electrical characteristics ranging from doped semiconductor to glassy metals depending on the crystalline quality of the nanosheets, their specific structural organization ant the operating temperature. Here, the charge transport (CT) mechanisms are studied that are occurring in GRM thin films near the metal-insulator transition (MIT) highlighting the role of defect density and local arrangement of the nanosheets. Two prototypical nanosheet types are compared, i.e., 2D reduced graphene oxide and few-layer-thick electrochemically exfoliated graphene flakes, forming thin films with comparable composition, morphology and room temperature conductivity, but different defect density and crystallinity. By investigating their structure, morphology, and the dependence of their electrical conductivity on temperature, noise and magnetic-field, a general model is developed describing the multiscale nature of CT in GRM thin films in terms of hopping among mesoscopic bricks, i.e., grains. The results suggest a general approach to describe disordered van der Waals thin films.
RESUMEN
In the context of graphene-based composite applications, a complete understanding of charge conduction in multilayer reduced graphene oxides (rGO) is highly desirable. However, these rGO compounds are characterized by multiple and different sources of disorder depending on the chemical method used for their synthesis. Most importantly, the precise role of interlayer interaction in promoting or jeopardizing electronic flow remains unclear. Here, thanks to the development of a multiscale computational approach combining first-principles calculations with large-scale transport simulations, the transport scaling laws in multilayer rGO are unraveled, explaining why diffusion worsens with increasing film thickness. In contrast, contacted films are found to exhibit an opposite trend when the mean free path becomes shorter than the channel length, since conduction becomes predominantly driven by interlayer hopping. These predictions are favorably compared with experimental data and open a road toward the optimization of graphene-based composites with improved electrical conduction.
Asunto(s)
Grafito , Electrónica , Grafito/química , Óxidos/químicaRESUMEN
It is important, but challenging, to measure the (photo)induced switching of molecules in different chemical environments, from solution through thin layers to solid bulk crystals. We compare the cis-trans conformational switching of commercial azobenzene molecules in different liquid and solid environments: polar solutions, liquid polymers, 2D nanostructures and 3D crystals. We achieve this goal by using complementary techniques: optical absorption spectroscopy, femtosecond transient absorption spectroscopy, Kelvin probe force microscopy and reflectance spectroscopy, supported by density functional theory calculations. We could observe the same molecule showing fast switching in a few picoseconds, when studied as an isolated molecule in water, or slow switching in tens of minutes, when assembled in 3D crystals. It is worth noting that we could also observe switching for small ensembles of molecules (a few attomoles), representing an intermediate case between single molecules and bulk structures. This was achieved using Kelvin probe force microscopy to monitor the change of surface potential of nanometric thin 2D islands containing ca. 106 molecules each, self-assembled on a substrate. This approach is not limited to azobenzenes, but can be used to observe molecular switching in isolated ensembles of molecules or other nano-objects and to study synergistic molecular processes at the nanoscale.
RESUMEN
Electrolyte gated organic transistors can operate as powerful ultrasensitive biosensors, and efforts are currently devoted to devising strategies for reducing the contribution of hardly avoidable, nonspecific interactions to their response, to ultimately harness selectivity in the detection process. We report a novel lab-on-a-chip device integrating a multigate electrolyte gated organic field-effect transistor (EGOFET) with a 6.5 µL microfluidics set up capable to provide an assessment of both the response reproducibility, by enabling measurement in triplicate, and of the device selectivity through the presence of an internal reference electrode. As proof-of-concept, we demonstrate the efficient operation of our pentacene based EGOFET sensing platform through the quantification of tumor necrosis factor alpha with a detection limit as low as 3 pM. Sensing of inflammatory cytokines, which also include TNFα, is of the outmost importance for monitoring a large number of diseases. The multiplexable organic electronic lab-on-chip provides a statistically solid, reliable, and selective response on microliters sample volumes on the minutes time scale, thus matching the relevant key-performance indicators required in point-of-care diagnostics.
Asunto(s)
Técnicas Biosensibles/métodos , Factor de Necrosis Tumoral alfa/análisis , Aptámeros de Péptidos/química , Aptámeros de Péptidos/metabolismo , Infecciones Bacterianas/metabolismo , Infecciones Bacterianas/patología , Técnicas Biosensibles/instrumentación , Electrodos , Oro/química , Humanos , Dispositivos Laboratorio en un Chip , Límite de Detección , Transistores Electrónicos , Factor de Necrosis Tumoral alfa/metabolismoRESUMEN
In this study we describe a simple and fast procedure for the covalent functionalization of pristine graphene with a pyrene-terminated alkylazide, transformed in a highly reactive radical by thermal activation. The functionalized graphene sheets showed enhanced dispersibility in organic solvents compared to the pristine ones, thus enhancing their solution processability and compatibility with solvents or polymers. The relative improvement of solubility estimated form the absorption spectra was ≈60% in CHCl3 and ≈1200% in THF. The obtained materials were characterized by optical absorption spectroscopy, photoemission spectroscopy, infrared spectroscopy and X-rays photoelectron spectroscopy. The presence of the pyrene photoemitting chromophore in the grafting unit allowed to monitor the successful grafting and to confirm the effectiveness of the alkylazide to improve graphene solubility even when present in small amounts on the graphene surface.
RESUMEN
In this work glucose (G), α-cyclodextrin (α-CD) and sodium salt of carboxymethyl cellulose (CMCNa) are used as dispersing agents for graphene oxide (GO), exploring the influence of both saccharide units and geometric/steric hindrance on the rheological, thermal, wettability and electrochemical properties of a GO/poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) nanocomposite. By acting on the saccharide-based additives, we can modulate the rheological, thermal, and wettability properties of the GO/PEDOT:PSS nanocomposite. Firstly, the influence of all the additives on the rheological behaviour of GO and PEDOT:PSS was investigated separately in order to understand the effect of the dispersing agent on both the components of the ternary nanocomposite, individually. Subsequently, steady shear and dynamic frequency tests were conducted on all the nanocomposite solutions, characterized by thermal, wettability and morphological analysis. Finally, the electrochemical properties of the GO/PEDOT composites with different dispersing agents for supercapacitors were investigated using cyclic voltammetry (CV). The CV results revealed that GO/PEDOT with glucose exhibited the highest specific capacitance among the systems investigated.
RESUMEN
The studies on surface chemical gradients are constantly gaining interest both for fundamental studies and for technological implications in materials science, nanofluidics, dewetting, and biological systems. Here we report on a new approach that is very simple and very efficient, to fabricate surface chemical gradients of alkanethiols, which combines electrochemical desorption/partial readsorption, with the withdrawal of the surface from the solution. The gradient is then stabilized by adding a complementary thiol terminated with a hydroxyl group with a chain length comparable to desorbed thiols. This procedure allows us to fabricate a chemical gradient of the wetting properties and the substrate work-function along a few centimeters with a gradient slope higher than 5°/cm. Samples were characterized by cyclic voltammetry during desorption, static contact angle, XPS analysis, and Kelvin probe. Computer simulations based on the Dissipative Particle Dynamics methods were carried out considering a water droplet on a mixed SAM surface. The results help to rationalize the composition of the chemical gradient at different position on the Au surface.
Asunto(s)
Compuestos de Sulfhidrilo/química , Adsorción , Electroquímica , Oro/química , Modelos Moleculares , Conformación Molecular , Oxidación-Reducción , Propiedades de SuperficieRESUMEN
The creation of ordered structures of molecules assembled from solution onto a substrate is a fundamental technological necessity across various disciplines, spanning from crystallography to organic electronics. However, achieving macroscopic order poses significant challenges, since the process of deposition is inherently impacted by factors like solvent evaporation and dewetting flows, which hinder the formation of well-organized structures. Traditional methods like drop casting or spin coating encounter limitations due to the rapid kinetics of solvent evaporation, leading to limited control over final uniformity and order. In response to these challenges, Solvent Vapour Annealing (SVA) has emerged as a promising solution for realizing ordered molecular structures at scales ranging from nano- to milli- meters. SVA decouples the self-assembly stage from the deposition stage by utilizing solvent vapours which can enable rearrangement, movement, and diffusion of large molecules on the surface even on a macroscopic scale. Essentially acting as "molecular lubricants," solvent vapours enable the formation of well-ordered molecular films. This review discusses the advancements, obstacles, and promising strategies associated with utilizing SVA for the development of innovative nanostructured thin films, and emphasizes the originality and effectiveness of molecular assembly on substrates achieved through this approach.
RESUMEN
The need for energy efficiency is leading to the growing use of additives to enhance the performance of oil in automotive engines. Great interest is focused on nano-additives even if to date there is still no practical use in commercial liquid lubricants. Herein, the potential of industrially scalable and low-cost graphene-related materials (GRMs) as additives to enhance the performance of oil in automotive engines is explored. The use of polyalkylmethacrylate dispersants, the most common key additives to formulate "green technology" lubricant oils liquid-processed GRM, is explored, investigating the role of the lateral size and the chemical analysis in the stability of the lubricant GRM dispersions. Showing the maximum duration of stability and a production method that avoids the use of strong oxidants, rheological tests were then focused on multilayered graphene flakes with sub-micrometre lateral size mixed in two commercial oil grades (5W-30 and 5W-40) under conditions similar to those of engine operation. The addition of such a filler increases the viscosity without affecting the Newtonian fluid behavior, while four-ball tests show a reduction in wear, indicating improved lubrication performance. Finally, preliminary bench-test on a commercial car engine showed increased power output corresponding to enhanced engine efficiency. The results clearly indicate the effective improvement in lubricating commercial oils due to GRM additives.
RESUMEN
A simple, fast and general approach for quantitative analysis of scanning probe microscopy (SPM) images is reported. As a proof of concept it is used to determine with a high degree of precision the value of observables such as 1) the height, 2) the flowing current and 3) the corresponding surface potential (SP) of flat nanostructures such as gold electrodes, organic semiconductor architectures and graphenic sheets. Despite histogram analysis, or frequency count (Fc), being the most common mathematical tool used to analyse SPM images, the analytical approach is still lacking. By using the mathematical relationship between Fc and the collected data, the proposed method allows quantitative information on observable values close to the noise level to be gained. For instance, the thickness of nanostructures deposited on very rough substrates can be quantified, and this makes it possible to distinguish the contribution of an adsorbed nanostructure from that of the underlying substrate. Being non-numerical, this versatile analytical approach is a useful and general tool for quantitative analysis of the Fc that enables all signals acquired and recorded by an SPM data array to be studied with high precision.
RESUMEN
Among the medical applications of nanoparticles, their usage as photosensitizer (PS) carriers for photodynamic therapy (PDT) has attracted increasing attention. In the present study we explored the morphological and photophysical properties of core-shell PMMA nanoparticles (PMMA-NPs) electrostatically post-loaded with the synthetic, water soluble 5,10,15,20-tetrakis(4-sulphonatophenyl)-porphyrin (TPPS4). pH response and singlet oxygen analyses of differently loaded samples proved the high capability of the PMMA-NPs to shield the PS from the environment, while retaining the PS singlet oxygen production capability. Preliminary in vitro imaging and phototoxicity experiments on HepG2 cells demonstrated the efficacy of the system to trigger photoinduced cell death in the culture.
Asunto(s)
Portadores de Fármacos/química , Nanopartículas/química , Polimetil Metacrilato/química , Porfirinas/química , Aniones/química , Supervivencia Celular/efectos de los fármacos , Células Hep G2 , Humanos , Concentración de Iones de Hidrógeno , Microscopía Confocal , Fotoquimioterapia , Fármacos Fotosensibilizantes/síntesis química , Fármacos Fotosensibilizantes/química , Fármacos Fotosensibilizantes/toxicidad , Oxígeno Singlete/química , Oxígeno Singlete/metabolismo , Electricidad EstáticaRESUMEN
Lysine-covalently modified graphene oxide (GO-Lys) was prepared by an innovative procedure. Lysine brushes promote enhanced adsorption of bisphenol A, benzophenone-4 and carbamazepine contaminants from tap water, with a removal capacity beyond the state of the art.
Asunto(s)
Grafito , Contaminantes Químicos del Agua , Purificación del Agua , Adsorción , Cinética , Lisina , Contaminantes Químicos del Agua/análisis , Purificación del Agua/métodosRESUMEN
Here, we describe a simple approach to fabricate graphene-based field-effect-transistors (FETs), starting from aqueous solutions of graphene-oxide (GO), processed entirely under ambient conditions. The process relies on the site-selective reduction of GO sheets deposited in between or on the surface of micro/nanoelectrodes. The same electrodes are first used for voltage-induced electrochemical GO reduction, and then as the source and drain contacts of FETs, allowing for the straightforward production and characterization of ambipolar graphene devices. With the use of nanoelectrodes, we could reduce different selected areas belonging to one single sheet as well.
RESUMEN
Kelvin probe force microscopy (KPFM) is usually applied to map the local surface potential of nanostructured materials at surfaces and interfaces. KPFM is commonly defined as a 'surface technique', even if this assumption is not fully justified. However, a quantification of the surface sensitivity of this technique is crucial to explore electrical properties at the nanoscale. Here a versatile 3D model is presented which provides a quantitative explanation of KPFM results, taking into account the vertical structure of the sample. The model is tested on nanostructured films obtained from two relevant semiconducting systems for field-effect transistor and solar cell applications showing different interfacial properties, i.e., poly(3-hexylthiophene) (P3HT) and perylene-bis-dicarboximide (PDI). These findings are especially important since they enable quantitative determination of the local surface potential of conjugated nanostructures, and thereby pave the way towards optimization of the electronic properties of nanoscale architectures for organic electronic applications.
Asunto(s)
Microscopía de Fuerza Atómica/métodos , Nanoestructuras/química , Imidas/química , Nanoestructuras/ultraestructura , Nanotecnología , Perileno/análogos & derivados , Perileno/química , Polietilenglicoles/química , Propiedades de SuperficieRESUMEN
In microelectronics and biology, many fundamental processes involve the exchange of charges between small objects, such as nanocrystals in photovoltaic blends or individual proteins in photosynthetic reactions. Because these nanoscale electronic processes strongly depend on the structure of the electroactive assemblies, a detailed understanding of these phenomena requires unraveling the relationship between the structure of the nano-object and its electronic function. Because of the fragility of the structures involved and the dynamic variance of the electric potential of each nanostructure during the charge generation and transport processes, understanding this structure-function relationship represents a great challenge. This Account discusses how our group and others have exploited scanning probe microscopy based approaches beyond imaging, particularly Kelvin probe force microscopy (KPFM), to map the potential of different nanostructures with a spatial and voltage resolution of a few nanometers and millivolts, respectively. We describe in detail how these techniques can provide researchers several types of chemical information. First, KPFM allows researchers to visualize the photogeneration and splitting of several unitary charges between well-defined nano-objects having complementary electron-acceptor and -donor properties. In addition, this method maps charge injection and transport in thin layers of polycrystalline materials. Finally, KPFM can monitor the activity of immobilized chemical components of natural photosynthetic systems. In particular, researchers can use KPFM to measure the electric potential without physical contact between the tip and the nanostructure studied. These measurements exploit long-range electrostatic interactions between the scanning probe and the sample, which scale with the square of the probe-sample distance, d. While allowing minimal perturbation, these long-range interactions limit the resolution attainable in the measurement of potentials. Although the spatial resolution of KPFM is on the nanometer scale, it is inferior to that of other related techniques such as atomic force or scanning tunneling microscopy, which are based on short-range interactions scaling as d(-7) or e(-d), respectively. To overcome this problem, we have recently devised deconvolution procedures that allow us to quantify the electric potential of a nano-object removing the artifacts due to its nanometric size.
RESUMEN
Monoatomic nanosheets can form 2-dimensional channels with tunable chemical properties, for ion storage and filtering applications. Here, we demonstrate transport of K+, Na+, and Li+ cations and F- and Cl- anions on the centimeter scale in graphene oxide membranes (GOMs), triggered by an electric bias. Besides ion transport, the GOM channels foster also the aggregation of the selected ions in salt crystals, whose composition is not the same as that of the pristine salt present in solution, highlighting the difference between the chemical environment in the 2D channels and in bulk solutions.
RESUMEN
Large area van der Waals (vdW) thin films are assembled materials consisting of a network of randomly stacked nanosheets. The multiscale structure and the two-dimensional (2D) nature of the building block mean that interfaces naturally play a crucial role in the charge transport of such thin films. While single or few stacked nanosheets (i.e., vdW heterostructures) have been the subject of intensive works, little is known about how charges travel through multilayered, more disordered networks. Here, we report a comprehensive study of a prototypical system given by networks of randomly stacked reduced graphene oxide 2D nanosheets, whose chemical and geometrical properties can be controlled independently, permitting to explore percolated networks ranging from a single nanosheet to some billions with room-temperature resistivity spanning from 10-5 to 10-1 Ω·m. We systematically observe a clear transition between two different regimes at a critical temperature T*: Efros-Shklovskii variable-range hopping (ES-VRH) below T* and power law behavior above. First, we demonstrate that the two regimes are strongly correlated with each other, both depending on the charge localization length ξ, calculated by the ES-VRH model, which corresponds to the characteristic size of overlapping sp2 domains belonging to different nanosheets. Thus, we propose a microscopic model describing the charge transport as a geometrical phase transition, given by the metal-insulator transition associated with the percolation of quasi-one-dimensional nanofillers with length ξ, showing that the charge transport behavior of the networks is valid for all geometries and defects of the nanosheets, ultimately suggesting a generalized description on vdW and disordered thin films.
RESUMEN
Charge transport in organic semiconductors is notoriously extremely sensitive to the presence of disorder, both internal and external (i.e., related to interactions with the dielectric layer), especially for n-type materials. Internal dynamic disorder stems from large thermal fluctuations both in intermolecular transfer integrals and (molecular) site energies in weakly interacting van der Waals solids and sources transient localization of the charge carriers. The molecular vibrations that drive transient localization typically operate at low-frequency (
RESUMEN
We present a novel approach for detecting and visualizing graphene oxide (GO) with high contrast on different substrates, including glass, quartz, and silicon. Visualization of GO sheets is accomplished through quenching the fluorescence of a thiophene dye, giving high optical contrast without the need to use interference methods. A comparison of fluorescence, AFM, and XRD measurements confirmed that even a single GO sheet can completely quench the fluorescence and thus be quickly visualized.