Multiple variation patterns of terpene synthases in 26 maize genomes.

Terpenoids are important compounds associated with the pest and herbivore resistance mechanisms of plants; consequently, it is essential to identify and explore terpene synthase (TPS) genes in maize. In the present study, we identified 31 TPS genes based on a pan-genome of 26 high-quality maize genomes containing 20 core genes (present in all 26 lines), seven dispensable genes (present in 2 to 23 lines), three near-core genes (present in 24 to 25 lines), and one private gene (present in only 1 line). Evaluation of ka/ks values of TPS in 26 varieties revealed that TPS25 was subjected to positive selection in some varieties. Six ZmTPS had ka/ks values less than 1, indicating that they were subjected to purifying selection. In 26 genomes, significant differences were observed in ZmTPS25 expression between genes affected by structural variation (SV) and those not affected by SV. In some varieties, SV altered the conserved structural domains resulting in a considerable number of atypical genes. The analysis of RNA-seq data of maize Ostrinia furnacalis feeding revealed 10 differentially expressed ZmTPS, 9 of which were core genes. However, many atypical genes for these responsive genes were identified in several genomes. These findings provide a novel resource for functional studies of ZmTPS.

Full-Length Transcriptome Characterization and Functional Analysis of Pathogenesis-Related Proteins in Lilium Oriental Hybrid 'Sorbonne' Infected with Botrytis elliptica.

Gray mold (Botrytis elliptica) causes a deleterious fungal disease that decreases the ornamental value and yield of lilies. Lilium oriental hybrid 'Sorbonne' is a variety that is resistant to gray mold. Understanding the mechanism of resistance against B. elliptica infection in 'Sorbonne' can provide a basis for the genetic improvement in lily plants. In this study, a PacBio Sequel II system was used to sequence the full-length transcriptome of Lilium 'Sorbonne' after inoculation with B. elliptica. A total of 46.64 Gb subreads and 19,102 isoforms with an average length of 1598 bp were obtained. A prediction analysis revealed 263 lncRNAs, and 805 transcription factors, 4478 simple sequence repeats, and 17,752 coding sequences were identified. Pathogenesis-related proteins (PR), which may play important roles in resistance against B. elliptica infection, were identified based on the full-length transcriptome data and previously obtained second-generation transcriptome data. Nine non-redundant potential LhSorPR proteins were identified and assigned to two groups that were composed of two LhSorPR4 and seven LhSorPR10 proteins based on their genetic relatedness. The real-time quantitative reverse transcription PCR (qRT-PCR) results showed that the patterns of expression of nine differentially expressed PR genes under B. elliptica stress were basically consistent with the results of transcriptome sequencing. The pattern of expression of LhSorPR4s and LhSorPR10s genes in different tissues was analyzed, and the expression of each gene varied. Furthermore, we verified the function of LhSorPR4-2 gene in Lilium. The expression of LhSorPR4-2 was induced by phytohormones such as methyl jasmonate, salicylic acid, and ethephon. Moreover, the promoter region of LhSorPR4-2 was characterized by several functional domains associated with phytohormones and stress response. The overexpression of LhSorPR4-2 gene in 'Sorbonne' increased the resistance of the lily plant to B. elliptica and correlated with high chitinase activity. This study provides a full-length transcript database and functionally analyzed the resistance of PR gene to B. elliptica in Lilium, thereby introducing the candidate gene LhSorPR4-2 to breed resistance in Lilium.

Synthesis of l-Deoxyribonucleosides from d-Ribose.

The preparation of 2-deoxy-l-ribose derivatives or mirror image deoxyribonucleosides (l-deoxyribonucleosides) from d-ribose is reported. Starting from inexpensive d-ribose, an acyclic d-form carbohydrate precursor was synthesized to study a unique carbonyl translocation process. In this novel radical reaction, not only was the configuration of the sugar transformed from the d-form to the l-form, but also deoxygenation at the C(2) position of the sugar was successfully achieved. This is one of the most practical methods for converting a d-sugar to a 2-deoxy-l-sugar in a one-step reaction. To further identify the reaction product, radical reactions followed by treatment with 1,3-propanedithiol and then benzoylation were performed to afford a dithioacetal derivative. The stereochemistry and configuration of the 2-deoxy-l-ribose dithioacetal derivative were confirmed by its X-ray crystal structure. To further apply this methodology, a diethyl thioacetal derivative was formed, followed by selective benzoyl protection, and an NIS-initiated cyclization reaction to give the desired ethyl S-l-2-deoxyriboside, which can be used as a 2-deoxy-l-ribosyl synthon in the formal total synthesis of various l-deoxyribonucleosides, such as l-dT.

Low-Power Perovskite Neuromorphic Synapse with Enhanced Photon Efficiency for Directional Motion Perception.

The advancement of artificial intelligent vision systems heavily relies on the development of fast and accurate optical imaging detection, identification, and tracking. Framed by restricted response speeds and low computational efficiency, traditional optoelectronic information devices are facing challenges in real-time optical imaging tasks and their ability to efficiently process complex visual data. To address the limitations of current optoelectronic information devices, this study introduces a novel photomemristor utilizing halide perovskite thin films. The fabrication process involves adjusting the iodide proportion to enhance the quality of the halide perovskite films and minimize the dark current. The photomemristor exhibits a high external quantum efficiency of over 85%, which leads to a low energy consumption of 0.6 nJ. The spike timing-dependent plasticity characteristics of the device are leveraged to construct a spiking neural network and achieve a 99.1% accuracy rate of directional perception for moving objects. The notable results offer a promising hardware solution for efficient optoneuromorphic and edge computing applications.

Affective computing for human-machine interaction via a bionic organic memristor exhibiting selective in situ activation.

Affective computing, representing the forefront of human-machine interaction, is confronted with the pressing challenges of the execution speed and power consumption brought by the transmission of massive data. Herein, we introduce a bionic organic memristor inspired by the ligand-gated ion channels (LGICs) to facilitate near-sensor affective computing based on electroencephalography (EEG). It is constructed from a coordination polymer comprising Co ions and benzothiadiazole (Co-BTA), featuring multiple switching sites for redox reactions. Through advanced characterizations and theoretical calculations, we demonstrate that when subjected to a bias voltage, only the site where Co ions bind with N atoms from four BTA molecules becomes activated, while others remain inert. This remarkable phenomenon resembles the selective in situ activation of LGICs on the postsynaptic membrane for neural signal regulation. Consequently, the bionic organic memristor network exhibits outstanding reliability (200 000 cycles), exceptional integration level (210 pixels), ultra-low energy consumption (4.05 pJ), and fast switching speed (94 ns). Moreover, the built near-sensor system based on it achieves emotion recognition with an accuracy exceeding 95%. This research substantively adds to the ambition of realizing empathetic interaction and presents an appealing bionic approach for the development of novel electronic devices.

A Self-Oscillated Organic Synapse for In-Memory Two-Factor Authentication.

Entering the era of AI 2.0, bio-inspired target recognition facilitates life. However, target recognition may suffer from some risks when the target is hijacked. Therefore, it is significantly important to provide an encryption process prior to neuromorphic computing. In this work, enlightened from time-varied synaptic rule, an in-memory asymmetric encryption as pre-authentication is utilized with subsequent convolutional neural network (ConvNet) for target recognition, achieving in-memory two-factor authentication (IM-2FA). The unipolar self-oscillated synaptic behavior is adopted to function as in-memory asymmetric encryption, which can greatly decrease the complexity of the peripheral circuit compared to bipolar stimulation. Results show that without passing the encryption process with suitable weights at the correct time, the ConvNet for target recognition will not work properly with an extremely low accuracy lower than 0.86%, thus effectively blocking out the potential risks of involuntary access. When a set of correct weights is evolved at a suitable time, a recognition rate as high as 99.82% can be implemented for target recognition, which verifies the effectiveness of the IM-2FA strategy.

Pulverization of Waste Polyvinyl Chloride (PVC) Film by Low Temperature Heat Treatment and Properties of Pulverized Product for Blast Furnace Injection as Alternative Fuel.

Recycling of waste plastics is of great significance for human society. The pulverization of waste film plastics is a key technical link in the development of collaborative utilization of waste plastics in the steel industry. In this study, waste polyvinyl chloride film plastics were first heated at different temperatures; then the de-chlorination ratio pulverization and the properties of the pulverized products closely related to blast furnace injection, such as powdery properties, combustion and explosiveness, were further analyzed. The weight loss ratio increased significantly with an increase in temperature and was not obvious between 370 °C and 400 °C. The highest de-chlorination ratio was approximately 84% at 370 °C, and the relative chlorine content in the product was 9%. The crushing performance of heat-treated polyvinyl chloride film increased with increasing temperature. Before 370 °C, there were more pores in the samples, and the surface of the sample seemed to be damaged with the temperature was further increased. The pulverized polyvinyl chloride had better fluidity and strong jet flow compared to industrial injection coals. At the same time, compared with other carbonaceous materials, it also exhibited better combustion performances. The pulverized polyvinyl chloride belonged to non explosiveness substance despite its high volatile content. The obtained results demonstrated that the pulverized polyvinyl chloride obtained under the present conditions could be used for blast furnace injection to some extent.

Traditional Chinese decoction Si Zhi Wan attenuates ovariectomy (OVX)-induced bone loss by inhibiting osteoclastogenesis and promoting apoptosis of mature osteoclasts.

Si Zhi Wan (SZW) is a traditional Chinese decoction used for osteoporosis treatment. Currently, the effect of SZW on ovariectomy (OVX)-induced bone loss and the underlying mechanisms remain unknown. Herein, we investigated the therapeutic effect of SZW on osteoporosis and explored the underlying mechanisms in vitro and in vivo. An OVX-induced bone loss model was established in vivo. After administration of SZW for 8 weeks, rats were sacrificed, and the uterus was weighted to calculate its index. The femur change was pathologically evaluated using hematoxylin and eosin (H&E) staining. The mineral density of the femur was observed by micro-CT. RAW264.7 cells were activated by receptor activator of nuclear factor-κB ligand (RANKL) in vitro. The effect of SZW on osteoclastogenesis was evaluated using tartrate-resistant acid phosphatase (TRAP) staining, Western blotting, and RT-PCR. The pro-apoptosis effect of SZW on mature osteoclasts was examined after induction of osteoclast maturation. Finally, the effect of SZW on the NF-κB pathway was evaluated. Our results demonstrated that SZW ameliorated OVX-induced bone loss in rats. In addition, SZW inhibited osteoclastogenesis and attenuated osteoclast-mediated bone resorption in vitro and in vivo. SZW also promoted apoptosis of mature osteoclasts. Mechanically, SZW exerts its effects by suppressing the NF-κB pathway. Overall, these findings demonstrated that SZW may be a potentially effective alternative treatment for osteoporosis.

Injectable and Self-Healing Hydrogel Based on Chitosan-Tannic Acid and Oxidized Hyaluronic Acid for Wound Healing.

Self-healing performance plays an important role in the in situ microinvasive injection of hydrogels, which can reduce sudden drug release and prolong the service life of hydrogels. In this paper, a multifunctional injectable and self-healing hydrogel for wound healing was developed. Chitosan (CS) was modified with TA to achieve potential adhesion, anti-inflammatory properties, and slower degradation rate. The hydrogel was formed by Schiff base reaction based on amino groups in CS and aldehyde groups in oxidized hyaluronic acid (OHA). The gel formation process was quick and convenient in mild conditions without extra initiators. Due to the dynamically reversible covalent bonds, the hydrogel could self-heal within 2 min after injection. It also had good biocompatibility and hemostatic performance. With the addition of TA, the hydrogel acquired anti-inflammatory properties and promoted cell growth, effectively accelerating the wound-healing process in vivo. The CS-TA/OHA hydrogel is expected to be used for skin repair.

Solution-Processed Synaptic Memristors Based on Halide Perovskite Nanocrystals.

Exploring new materials and structures to construct synaptic devices represents a promising route to fundamentally approach novel forms of computing. Nanocrystals (NCs) of halide perovskites possess unique charge transport characteristics, i.e., ionic-electronic coupling, holding considerable promise for energy-efficient and reconfigurable artificial synapses. Herein, we report solution-processed thin-film memristors from all-inorganic CsPbBr3 perovskite NCs, functioning as an electrically programmable analog memory with good stability. The devices are demonstrated to successfully emulate a number of essential synaptic functions with low power consumption, including reversible potentiation and depression, short-term plasticity (STP), paired-pulse facilitation (PPF), and long-term plasticity (LTP), such as spike-number-dependent plasticity (SNDP), spike-rate-dependent plasticity (SRDP), spike-timing-dependent plasticity (STDP), and spike-voltage-dependent plasticity (SVDP). It is proposed that a coupled capacitive and inductive phenomenon originating from charge trapping and ion migration in CsPbBr3 NC films, controlled by the amplitude and timing of the programming pulses, defines the degree of synaptic plasticity. A transition emerges from the fast trap-related capacitive regime to a slow ionic inductive regime, which enables continuous change of the film resistance and the magnitude of the electronic current, analogous to the synaptic weight modulation in biological synapses.

Ultra-Robust Deep-UV Photovoltaic Detector Based on Graphene/(AlGa)2O3/GaN with High-Performance in Temperature Fluctuations.

A strategy of adopting Ga2O3 alloyed with Al element to reduce the oxygen vacancy defect density and enhance the interface barrier height of Ga2O3 heterojunction is proposed to fabricate deep-UV photovoltaic detectors with high thermal stability, high photoresponsivity, and fast response speed. Here, a graphene/(AlGa)2O3/GaN device with a photoresponsivity of ∼20 mA/W, a rise time of ∼2 µs, and a decay time of ∼10 ms is presented at 0 V bias. At the working temperature of 453 K, the device still exhibits a photo-to-dark current ratio (PDCR) of ∼1.8 × 103, which is 1-2 orders of magnitude higher than that of the reported high-temperature deep-UV film detectors. By comparing the formation energy of oxygen vacancy defects and the interface barrier height of the heterojunction at different temperatures in graphene/Ga2O3/GaN and graphene/(AlGa)2O3/GaN systems, the strategy of synthesizing (AlGa)2O3 ternary composite alloy is proved to be reliable for fabricating high-performance deep-UV photovoltaic detectors. The method proposed in this paper can provide reference for the preparation of deep-UV photovoltaic detectors with high photoresponsivity and thermal stability in the future.