RESUMEN
Achieving high-temperature superlubricity is essential for modern extreme tribosystems. Solid lubrication is the sole viable alternative due to the degradation of liquid ones but currently suffers from notable wear, instability, and high friction coefficient. Here, we report robust superlubricity in MoS2/graphene van der Waals heterostructures at high temperatures up to â¼850 K, achieved through localized heating to enable reliable friction testing. The ultralow friction of the MoS2/graphene heterostructure is found to be notably further reduced at elevated temperature and dominantly contributed by the MoS2 edge. The observation can be well described by a multi-contact model, wherein the thermally activated rupture of edge-contacts facilitates the sliding. Our results should be applicable to other van der Waals heterostructures and shed light on their applications for superlubricity at elevated temperature.
RESUMEN
Household garbage rooms release abundant bioaerosols and are an important source of pathogens; however, information on the distribution and survival patterns of pathogens in different waste components is limited. In this study, a culture method and 16S rRNA high-throughput sequencing were used to determine bacterial communities, culturable pathogens, and human bacterial pathogens (HBPs). The results showed that abundant culturable bacteria were detected in all waste types, and a large number of S. aureus was detected on the surface of recyclable wastes, whereas S. aureus, total coliforms, Salmonella, Enterococcus, and hemolytic bacteria were detected in food waste and other waste. The activities of these detected pathogenic bacteria decreased after 24 h of storage but re-activated within one week. Factors affecting the emergence of pathogens varied with different waste components. Sequencing results showed that Pseudomonas, Acinetobacter, and Burkholderia were abundant in the waste samples, whereas Achromobacter, Exiguobacteriums, Bordetella, and Corynebacterium were the primary pathogens in the bioaerosol and wall attachment. The results of traceability analysis showed that bioaerosol microbes were mainly derived from raw kitchen waste (5.98%) and plastic and paper contaminated with food waste (19.93%) in garbage rooms. In addition, bioaerosols were the main source of microflora in the wall attachment, which possessed high HBP diversity and required more attention. These findings will help in understanding the microbial hazards in different waste components and provide guidance for the control and risk reduction of bioaerosols during waste management and recycling.
Asunto(s)
Aerosoles , Microbiología del Aire , Bacterias , Bacterias/aislamiento & purificación , Bacterias/clasificación , Bacterias/genética , Aerosoles/análisis , Residuos de Alimentos , Humanos , ARN Ribosómico 16S/genética , ARN Ribosómico 16S/análisis , Eliminación de Residuos , Monitoreo del Ambiente/métodosRESUMEN
Wastes recycling and reutilization technique could simultaneously fulfill waste control and energy recovery sustainably, which has attracted increasing attention. This work proposed a novel waste reuse technology utilizing ceramsite and amended Fe2O3-ceramsite made from waste activated sludge (WAS) as additives to promote the yield of methane from WAS anaerobic digestion (AD). Experimental results demonstrated that compared to the control (85.05 ± 0.2 mL CH4/g-VS), the cumulative methane yield was effectively enhanced by 14% and 40% when ceramsite and Fe2O3-ceramsite were added. Further investigation revealed that ceramsite, especially the Fe2O3-ceramsite, enriched the populations of key anaerobes involved in hydrolysis, acidification, and methanogenesis. Meanwhile, potential syntrophic metabolisms between syntrophic bacteria and methanogens were confirmed in the Fe2O3-ceramsite AD system. Mechanisms studies exhibited that ceramsite and Fe2O3-ceramsite reinforced intermediate processes for methane production. The favorable pore structure, enhanced Fe (III) reduction capacity and conductivity also contributed a lot to the AD process.
Asunto(s)
Bacterias Anaerobias , Mezclas Complejas , Aguas del Alcantarillado , Anaerobiosis , Aguas del Alcantarillado/química , Bacterias Anaerobias/metabolismo , Metano , Reactores Biológicos , Eliminación de Residuos Líquidos/métodosRESUMEN
In this study, the behavior of heavy metal transformation during the co-thermal treatment of hazardous waste incineration fly ash (HWIFA) and Fe-containing hazardous waste (including hazardous waste incineration bottom slag (HWIBS) and electroplating sludge (ES)) was investigated. The findings demonstrated that such a treatment effectively reduced the static leaching toxicity of Cr and Pb. Moreover, when the treatment temperature exceeded 1000 °C, the co-thermal treated sample exhibited low concentrations of dynamically leached Cr, Pb, and Zn, indicating that these heavy metals were successful detoxified. Thermodynamic analyses and phase transformation results suggested that the formation of spinel and the gradual disappearance of chromium dioxide in the presence of Fe-containing hazardous wastes contributed to the solidification of chromium. Additionally, the efficient detoxification of Pb and Zn was attributed to their volatilization and entry into the liquid phase during the co-thermal treatment process. Therefore, this study sets an excellent example of the co-thermal treatment of hazardous wastes and the control of heavy metal pollution during the treatment process.
Asunto(s)
Metales Pesados , Eliminación de Residuos , Ceniza del Carbón , Eliminación de Residuos/métodos , Aguas del Alcantarillado/análisis , Residuos Peligrosos/análisis , Galvanoplastia , Plomo , Incineración/métodos , Metales Pesados/análisis , Residuos Sólidos/análisis , Carbono , Material Particulado/análisisRESUMEN
During the long-term stabilization process of landfills, the pressure field undergoes constant changes. This study constructed dynamic pressure changes scenarios of high-pressure differentials (0.6 MPa) and low-pressure differentials (0.2 MPa) in the landfill pressure field at 25 °C and 50 °C, and investigated the sulfate reduction behavior in response to landfill dynamic pressure changes. The results showed that the pressurization or depressurization of high-pressure differentials caused more significant differences in sulfate reduction behavior than that of low-pressure differentials. The lowest hydrogen sulfide (H2S) release peak concentration under pressurization was only 29.67% of that under initial pressure condition; under depressurization, the highest peak concentration of H2S was up to 21,828 mg m-3, posing a serious risk of H2S pollution. Microbial community and correlation analysis showed that pressure had a negative impact on the sulfate-reducing bacteria (SRB) community, and the SRB community adjusted its structure to adapt to pressure changes. Specific SRBs were further enriched with pressure changes. Differential H2S release behavior under pressure changes in the 25 °C pressure environments were mediated by Desulfofarcimen (ASV343) and Desulfosporosinus (ASV1336), while Candidatus Desulforudis (ASV24) and Desulfohalotomaculum (ASV94) played a key role at 50 °C. This study is helpful in the formulation of control strategies for the source of odor pollution in landfills.
Asunto(s)
Desulfovibrio , Sulfuro de Hidrógeno , Sulfuro de Hidrógeno/química , Instalaciones de Eliminación de Residuos , Sulfatos/químicaRESUMEN
Anaerobic digestion (AD) is a promising technique for waste management, which can achieve sludge stabilization and energy recovery. This study successfully prepared Fe3O4@ceramsite from WAS and applied it as an additive in sludge digestion, aiming to improve the conversion of organics to biomethane efficiency. Results showed that after adding the Fe3O4@ceramsite, the methane production was enhanced by 34.7% compared with the control group (88.0 ± 0.1 mL/g VS). Further mechanisms investigation revealed that Fe3O4@ceramsite enhanced digesta stability by strong buffering capacity, improved sludge conductivity, and promoted Fe (III) reduction. Moreover, Fe3O4@ceramsite has a larger surface area and better porous structure, which also facilitated AD performance. Microbial community analysis showed that some functional anaerobes related to AD such as Spirochaeta and Smithella were enriched with Fe3O4@ceramsite treatment. Potential syntrophic metabolisms between syntrophic bacteria (Syntrophomonas, associated with DIET) and methanogens were also detected in the Fe3O4@ceramsite treatment AD system.
Asunto(s)
Metano , Aguas del Alcantarillado , Anaerobiosis , Metano/metabolismo , Compuestos Férricos , Eliminación de Residuos Líquidos/métodosRESUMEN
Landfill leachate is an important source of microplastics (MPs) and antibiotic-resistance genes (ARGs). Here, in the presence of polystyrene MPs (PS-MPs) and polyethylene MPs (PE-MPs), the nitrogen and phosphorus removal effect and sludge structure performance were affected in an anaerobic-anoxic-aerobic system, a typical biological leachate treatment process. The abundance of tetracycline-resistance genes (tet genes) in biofilms on the two types of MP was significantly higher than that in the leachate and sludge, and the load on PE-MPs was higher than that on PS-MPs because of the porous structure of PE-MPs. Aging of the MPs increased their surface roughness and abundance of oxygen-containing functional groups and shaped the profile of ARGs in the MP biofilms. The biofilm biomass and growth rate on the two types of MP increased with the incubation time in the first 30 days, and was affected by environmental factors. Structural equation models and co-occurrence network analysis demonstrated that the MPs indirectly affected the spectrum of ARGs by affecting biofilm formation, and, to a lesser extent, had a direct impact on the selective enrichment of ARGs. We discuss the mechanisms of the relationships between MPs and ARGs in the leachate treatment system, which will have guiding significance for future research. Our data on the colonization of microorganisms and tet genes in MPs biofilms provide new evidence concerning the accumulation and transmission of these ARGs, and are important for understanding the mechanisms of MPs in spreading pollution.
Asunto(s)
Biopelículas , Microplásticos , Resistencia a la Tetraciclina , Microplásticos/toxicidad , Biopelículas/efectos de los fármacos , Resistencia a la Tetraciclina/genética , Contaminantes Químicos del Agua/toxicidad , Bacterias/genética , Bacterias/efectos de los fármacos , Aguas del Alcantarillado/microbiología , Genes Bacterianos , Tetraciclina/farmacologíaRESUMEN
Based on the CaO-SiO2-Al2O3 system, the feasibility of co-vitrification of hazardous waste incineration fly ash (FA) and hazardous waste sludge (HWS) was verified. In the CaO-SiO2-Al2O3 ternary system diagram, the melting point of the system gradually decreases with an appropriate increase in SiO2 content when the CaO/Al2O3 ratio is determined to be approximately 1. The TG-DSC results revealed that the liquid phase generation temperature in the FA and HWS mixture system was significantly lower than those of FA and HWS individually owing to the different CaO, SiO2, and Al2O3 contents; this is consistent with the results of the theoretical melting characteristics analysis, which show that the melting characteristic temperatures can be reduced by controlling the CaO-SiO2-Al2O3 ratio in the system. The co-vitrification experimental results confirmed that a vitreous content above 92%, a loss ratio on acid dissolution less than 1.74%, and leaching toxicity of heavy metals lower than 0.15 mg/L could be obtained by adjusting the CaO, SiO2, and Al2O3 contents in the FA and HWS system to 20 wt%-32.5 wt%, 35 wt%-61 wt% and 14 wt%-32.5 wt%, respectively, and under a melting temperature of 1350 °C.
Asunto(s)
Metales Pesados , Eliminación de Residuos , Ceniza del Carbón , Incineración , Dióxido de Silicio , Aguas del Alcantarillado , Vitrificación , Metales Pesados/análisis , Residuos Sólidos/análisis , Eliminación de Residuos/métodos , Carbono , Residuos Peligrosos , Material Particulado/análisisRESUMEN
Attention should be paid to the sulfate reduction behavior in a pressure-bearing leachate saturated zone. In this study, within the relative pressure range of 0-0.6 MPa, the ambient temperature with the highest sulfate reduction rate of 50°C was selected to explore the difference in sulfate reduction behavior in a pressure-bearing leachate saturated zone. The results showed that the sulfate reduction rate might further increase with an increase in pressure; however, owing to the effect of pressure increase, the generated hydrogen sulfide (H2S) could not be released on time, thereby decreasing its highest concentration by approximately 85%, and the duration extended to about two times that of the atmospheric pressure. Microbial community structure and functional gene abundance analyses showed that the community distribution of sulfate-reducing bacteria was significantly affected by pressure conditions, and there was a negative correlation between disulfide reductase B (dsrB) gene abundance and H2S release rate. Other sulfate reduction processes that do not require disulfide reductase A (dsrA) and dsrB genes may be the key pathways affecting the sulfate reduction rate in the pressure-bearing leachate saturated zone. This study improves the understanding of sulfate reduction in landfills as well as provides a theoretical basis for the operation and management of landfills.
Asunto(s)
Presión Atmosférica , Disulfuros , Fenómenos Químicos , Fenómenos Físicos , SulfatosRESUMEN
Moving boundaries of electric double layer at solid-liquid interface enables unprecedented persistent energy conversion and provokes a kinetic photovoltaic effect by moving an illumination region along the semiconductor-water interface. Here, we report a transistor-inspired gate modulation of kinetic photovoltage by applying a bias at the semiconductor-water interface. The kinetic photovoltage of both p-type and n-type silicon samples can be facilely switched on/off, stemming from the electrical-field-modulated surface band bending. In contrast to the function of solid-state transistors relying on external sources, passive gate modulation of the kinetic photovoltage is achieved simply by introducing a counter electrode with materials of desired electrochemical potential. This architecture provides the ability to modulate the kinetic photovoltage over three orders of magnitude and opens up a new way for self-powered optoelectronic logic devices.
RESUMEN
The vertical distribution of sulfonamides (SAs), tetracyclines (TCs), macrolides (MLs), and their related antibiotic resistance genes (ARGs) were comprehensively investigated and characterized in a representative municipal solid waste (MSW) landfill in China. The total concentrations of target antibiotics in the MSW landfill were SAs > TCs > MLs. The abundances of mexF (10.78 ± 0.65 log10copies/g) and sul genes (9.15 ± 0.54 log10copies/g) were relatively high, while the tet genes (7.19 ± 0.77 log10copies/g) were the lowest. Both the abundance of antibiotics and genes fluctuated with landfill depth, and the ARGs of the same antibiotics were consistent with depth change. Intl1 and sul genes (sul1, sul2) were tightly connected, and a close relationship also existed between tet genes (tetM, tetQ) and MLs resistance genes (ermB, mefA). High-throughput sequencing showed the dominant genera were Sporosarcina (38%) and Thiobacillus (17%) at sampling points A and C, while the microbial community varied with depth increase at point B were Brevundimonas (20%), Sporosarcina (20%), Pseudomonas (24%), Lysobacter (28%), and Thioalkalimicrobium (14%), respectively. Network analysis further visualized the relationship among antibiotics, genes, and microbial communities and the results indicated the non-random connection among them and the possible host of the target gene. Even at 12.0 m below the landfill surface, the pollution of antibiotics resistance was still serious, which posed difficulties for subsequent landfill remediation and pollution control.
Asunto(s)
Antibacterianos , Residuos Sólidos , Antibacterianos/análisis , Antibacterianos/farmacología , China , Farmacorresistencia Microbiana/genética , Genes Bacterianos , Macrólidos , Residuos Sólidos/análisis , Tetraciclinas/análisis , Instalaciones de Eliminación de ResiduosRESUMEN
Thermal treatment technology considerably affects the harmlessness of fly ash (FA), but highly toxic heavy metals, such as Cr, attract considerable attention. In this study, we investigated the influence of CaO dosage at 600°C-1200 °C on the curing effect of Cr during FA thermal treatment based on the combination effect of CaO. Static, dynamic, and continuous sequential leachings were performed for the sintered products. Results showed that the leaching concentration of Cr decreased by approximately 91% when CaO dosage was 8.57%, and the difference in the residual state was the main reason for the difference in the leaching behavior of Cr. The proportion of the residual state in the sintered products increased from 35.16% to 64.01%. The transition between Cr2O3, Cr5O12, and CaCr2O4 is the fundamental reason for the leaching behavior of Cr and the change in the residual state. This study provides a scientific basis for preventing and controlling heavy metal pollution and optimizing environmental supervision in the FA thermal treatment process.
Asunto(s)
Metales Pesados , Eliminación de Residuos , Compuestos de Calcio , Carbono , Cromo , Ceniza del Carbón/análisis , Residuos Peligrosos , Incineración , Metales Pesados/análisis , Óxidos , Material Particulado , Eliminación de Residuos/métodos , Residuos Sólidos/análisisRESUMEN
5-Hydroxymethylfurfural (HMF) as value-added platform chemical can be derived from biomass. This study used microwave hydrothermal liquefaction (MHTL) to obtain HMF from sugarcane bagasse in acidic seawater conditions. The key processing parameters including temperature, reaction time, and liquid-to-solid ratio (L/S) were evaluated and optimized. The highest HMF yield of 8.1 wt% was obtained at 149 °C with a reaction time of 4 min and a L/S value of 12:1, respectively. This yield is considerable and even higher than the yield derived from sugarcane molasses under similar microwave conditions in the absence of seawater. Hence, acidic seawater was found to promote the hydrolysis of sugarcane bagasse to give HMF precursor (i.e. fructose and glucose), while simultaneously inhibiting the conversion of HMF to levulinic acid under MHTL conditions, possibly explaining the high HMF yield. This method presents a new and sustainable means of transforming waste biomass to valuable substances using seawater or brine wastewater.
Asunto(s)
Saccharum , Celulosa , Furaldehído/análogos & derivados , Microondas , Agua de MarRESUMEN
Chitin biomass, a rich renewable resource, is the second most abundant natural polysaccharide after cellulose. Conversion of chitin biomass to high value-added chemicals can play a significant role in alleviating the global energy crisis and environmental pollution. In this review, the recent achievements in converting chitin biomass to high-value chemicals, such as 5-hydroxymethylfurfural (HMF), under different conditions using chitin, chitosan, glucosamine, and N-acetylglucosamine as raw materials are summarized. Related research on pretreatment technology of chitin biomass is also discussed. New approaches for transformation of chitin biomass to HMF are also proposed. This review promotes the development of industrial technologies for degradation of chitin biomass and preparation of HMF. It also provides insight into a sustainable future in terms of renewable resources.
Asunto(s)
Quitina/metabolismo , Contaminación Ambiental/prevención & control , Furaldehído/análogos & derivados , Biomasa , Furaldehído/metabolismoRESUMEN
Municipal solid waste landfills are responsible for odors affecting the environment and human health. Dimethyl sulfide (DMS) is one of the major odorous compounds known for its low odor threshold and wide distribution. This study examined the generation, migration and emission of DMS in four artificial landfill-simulating reactors: Reactor 1 and Reactor 2, running under anaerobic and semi-aerobic conditions, respectively, without leachate recirculation; and Reactor 3 and Reactor 4, running under anaerobic and semi-aerobic conditions, respectively, with leachate recirculation. From the odor control perspective, aeration can efficiently inhibit maximum DMS headspace concentration by 31.7-93.7%, especially with the functioning of leachate recirculation. However, leachate recirculation in anaerobic conditions may double the DMS emission concentration but may also shorten the period over which DMS is effective because of the upward migration of liquid DMS in the recirculated leachate. The DMS generation was active in the acidification and methane fermentation phase of the simulated landfill and was possibly affected by the volatile fatty acid concentration, chemical oxygen demand, total organic carbon concentration and pH of the leachate, as well as total organic carbon in the refuse. Most significantly, DMS emission can be effectually dealt with by aeration along with leachate recirculation.
Asunto(s)
Contaminantes Atmosféricos/química , Sulfuros/química , Contaminantes Químicos del Agua/química , Análisis de la Demanda Biológica de Oxígeno , Monitoreo del Ambiente , Ácidos Grasos Volátiles/análisis , Metano/análisis , Instalaciones de Eliminación de Residuos , Agua/químicaRESUMEN
Hydrogen sulfide (H2S) is one of the major contributors to offensive odors from landfills, and its concentration differs under different operation modes. This study examined the distribution of H2S emission from different landfill depths under different operation modes (anaerobic, semi-aerobic, semi-aerobic transformation, and the three operation modes with additional leachate recirculation). The microbial community (especially the sulfur-metabolizing bacterial community) was investigated using high-throughput sequencing technology. The results showed that the semi-aerobic mode could substantially lower the risks of H2S pollution in landfills, which might be because of the difference in biological processes related to sulfur metabolism driven by functional microbes. A myriad of factors are responsible for mutually shaping the sulfur-metabolizing bacterial community composition in landfills that might subsequently affect the behavior of H2S emission in landfills. The differences in abundance of the genera Acinetobacter and Paracoccus (phylum Proteobacteria) caused by environmental factors might explain the differences in H2S emission. H2S odor control could be realized if the related functional microbe diversity can be influenced by adjustments to landfill operation.
Asunto(s)
Bacterias/metabolismo , Sulfuro de Hidrógeno/metabolismo , Azufre/metabolismo , Instalaciones de Eliminación de Residuos , Bacterias/genética , Biodegradación Ambiental , Secuenciación de Nucleótidos de Alto RendimientoRESUMEN
Fed batch bioelectrochemical systems (BESs) based on electrical stimulation were used to treat p-fluoronitrobenzene (p-FNB) wastewater at high salinities. At a NaCl concentration of 40 g/liter, p-FNB was removed 100% in 96 h in the BES, whereas in the biotic control (BC) (absence of current), p-FNB removal was only 10%. By increasing NaCl concentrations from 0 g/liter to 40 g/liter, defluorination efficiency decreased around 40% in the BES, and in the BC it was completely ceased. p-FNB was mineralized by 30% in the BES and hardly in the BC. Microorganisms were able to store 3.8 and 0.7 times more K(+) and Na(+) intracellularly in the BES than in the BC. Following the same trend, the ratio of protein to soluble polysaccharide increased from 3.1 to 7.8 as the NaCl increased from 0 to 40 g/liter. Both trends raise speculation that an electrical stimulation drives microbial preference toward K(+) and protein accumulation to tolerate salinity. These findings are in accordance with an enrichment of halophilic organisms in the BES. Halobacterium dominated in the BES by 56.8% at a NaCl concentration of 40 g/liter, while its abundance was found as low as 17.5% in the BC. These findings propose a new method of electrical stimulation to improve microbial salinity resistance.
Asunto(s)
Estimulación Eléctrica , Halobacterium/metabolismo , Consorcios Microbianos , Nitrobencenos/metabolismo , Salinidad , Cloruro de Sodio/metabolismo , Factores de Tiempo , Aguas Residuales/química , Contaminantes Químicos del Agua/metabolismo , Purificación del Agua/métodosRESUMEN
Low temperature aggravates biological treatment of refractory p-fluoronitrobenzene (p-FNB) because of microtherm inhibition of microbial activity. Considering the potential characterization of energy supply for microbial metabolism and spurring microbial activity by electrical stimulation, a bioelectrochemical system (BES) was established to provide sustaining electrical stimulation for p-FNB mineralization at a low temperature. Electrical stimulation facilitated p-FNB treatment and bioelectrochemical reaction rate constants for the removal and defluorination of p-FNB at 10 °C were 0.0931 and 0.0054 h(-1), which were higher than the sums of the rates found using a biological system and an electrocatalytic system by 62.8 and 64.8%, respectively. At a low temperature, microbial activity in terms of dehydrogenase and ATPase was found to be higher with electrical stimulation, being 121.1 and 100.1% more active than that in the biological system. Moreover, stronger antioxidant ability was observed in the BES, which implied a better cold-resistance and relief of microtherm inhibition by electrical stimulation. Bacterial diversity analysis revealed a significant evolution of microbial community by electrical stimulation, and Clostridia was uniquely enriched. One bacterial sequence close to Pseudomonas became uniquely predominant, which appeared to be crucial for excellent p-FNB treatment performance in the BES at a low temperature. Economic evaluation revealed that the energy required to mineralize an extra mole of p-FNB was found to be 247 times higher by heating the system than by application of electrical stimulation. These results indicated that application of electrical stimulation is extremely promising for treating refractory waste at low temperatures.
Asunto(s)
Bacterias/química , Bacterias/metabolismo , Nitrobencenos/metabolismo , Bacterias/genética , Bacterias/aislamiento & purificación , Biodegradación Ambiental , Reactores Biológicos/microbiología , Frío , Estimulación EléctricaRESUMEN
Because H2S emitted by landfill sites has seriously endangered human health, its removal is urgent. H2S removal by use of an autotrophic denitrification landfill biocover has been reported. In this process, nitrate-reducing and sulfide-oxidizing bacteria use a reduced sulfur source as electron donor when reducing nitrate to nitrogen gas and oxidizing sulfur compounds to sulfate. The research presented here was performed to investigate the possibility of endogenous mitigation of H2S by autotrophic denitrification of landfill waste. The sulfide oxidation bioprocess accompanied by nitrate reduction was observed in batch tests inoculated with mineralized refuse from a landfill site. Repeated supply of nitrate resulted in rapid oxidation of the sulfide, indicating that, to a substantial extent, the bioprocess may be driven by functional microbes. This bioprocess can be realized under conditions suitable for the autotrophic metabolic process, because the process occurred without addition of acetate. H2S emissions from landfill sites would be substantially reduced if this bioprocess was introduced.
Asunto(s)
Betaproteobacteria/metabolismo , Genes Bacterianos , Sulfuro de Hidrógeno/metabolismo , Paracoccus denitrificans/metabolismo , ARN Ribosómico 16S , Procesos Autotróficos/fisiología , Betaproteobacteria/genética , Betaproteobacteria/aislamiento & purificación , Biodegradación Ambiental , Reactores Biológicos , Desnitrificación , Humanos , Nitratos/química , Oxidación-Reducción , Paracoccus denitrificans/genética , Paracoccus denitrificans/aislamiento & purificación , ARN Ribosómico 16S/genética , Sulfatos/química , Instalaciones de Eliminación de ResiduosRESUMEN
Hydrogen sulfide (H2S(g)) emission from landfills is a widespread problem, especially when aged refuse is excavated. H2S(g) emission from aged refuse exposed to air was investigated and the results showed that large amounts of H2S(g) can be released, especially in the first few hours after excavation, when H2S(g) concentrations in air near refuse could reach 2.00 mg m(-3). Initial exposure to air did not inhibit the emission of H2S(g), as is generally assumed, but actually promoted it. The amounts of H2S(g) emitted in the first 2 d after excavation can be very dangerous, and the risks associated with the emission of H2S(g) could decrease significantly with time. Unlike a large number of sulfide existed under anaerobic conditions, the sulfide in aged municipal solid waste can be oxidized chemically to elemental sulfur (but not sulfate) under aerobic conditions, and its conversion rate was higher than 80%. Only microorganisms can oxidize the reduced sulfur species to sulfate, and the conversion rate could reach about 50%. Using appropriate techniques to enhance these chemical and biological transformations could allow the potential health risks caused by H2S(g) after refuse excavation to be largely avoided.