On-Surface Driven Formal Michael Addition Produces m-Polyaniline Oligomers on Pt(111).

On-surface synthesis is emerging as a highly rational bottom-up methodology for the synthesis of molecular structures that are unattainable or complex to obtain by wet chemistry. Here, oligomers of meta-polyaniline, a known ferromagnetic polymer, were synthesized from para-aminophenol building-blocks via an unexpected and highly specific on-surface formal 1,4 Michael-type addition at the meta position, driven by the reduction of the aminophenol molecule. We rationalize this dehydrogenation and coupling reaction mechanism with a combination of in situ scanning tunneling and non-contact atomic force microscopies, high-resolution synchrotron-based X-ray photoemission spectroscopy and first-principles calculations. This study demonstrates the capability of surfaces to selectively modify local molecular conditions to redirect well-established synthetic routes, such as Michael coupling, towards the rational synthesis of new covalent nanostructures.

Time-Course of CYP450 Genes Expression From Dendroctonus rhizophagus (Curculionidae: Scolytinae) During Early Hours of Drilling Bark and Settling Into the Host Tree.

Dendroctonus bark beetles (Scolytinae) are one of the most important disturbance agents of coniferous forests in North and Central America. These beetles spend their lives almost entirely under the tree bark, and their survival and reproductive success depend on their ability to overcome the toxic effect of the trees' oleoresin. The cytochromes P450 (CYPs) are associated with the detoxification process of xenobiotics, as well as other physiological processes. Different cytochromes (families 4, 6, and 9) in the Dendroctonus species have been expressed under several experimental conditions; nevertheless, the expression time-course of these genes is unknown. To explore the induction speed of CYPs, we evaluated the relative expression of the CYP6BW5, CYP6DG1, CYP6DJ2, CYP9Z18, and CYP9Z20 genes at the early hours of drilling and settling into a tree (1, 2, 4, 6, 8, 12, 18 h) both in females and males, solitary or paired, of the bark beetle Dendroctonus rhizophagus Thomas and Bright. Our findings show that the five genes were rapidly overexpressed in the early hours (1 to 6 h) in both sexes and in solitary and paired conditions, suggesting their participation in the detoxification process. Additionally, the CYPs expression shows up- and down-regulation patterns through these short times, suggesting their probable participation in other physiological processes as the biosynthesis of hormones, pheromones or compounds related to reproduction.

Chemistry below graphene: decoupling epitaxial graphene from metals by potential-controlled electrochemical oxidation.

While high-quality defect-free epitaxial graphene can be efficiently grown on metal substrates, strong interaction with the supporting metal quenches its outstanding properties. Thus, protocols to transfer graphene to insulating substrates are obligatory, and these often severely impair graphene properties by the introduction of structural or chemical defects. Here we describe a simple and easily scalable general methodology to structurally and electronically decouple epitaxial graphene from Pt(111) and Ir(111) metal surfaces. A multi-technique characterization combined with ab-initio calculations was employed to fully explain the different steps involved in the process. It was shown that, after a controlled electrochemical oxidation process, a single-atom thick metal-hydroxide layer intercalates below graphene, decoupling it from the metal substrate. This decoupling process occurs without disrupting the morphology and electronic properties of graphene. The results suggest that suitably optimized electrochemical treatments may provide effective alternatives to current transfer protocols for graphene and other 2D materials on diverse metal surfaces.

On-Surface Bottom-Up Synthesis of Azine Derivatives Displaying Strong Acceptor Behavior.

On-surface synthesis is an emerging approach to obtain, in a single step, precisely defined chemical species that cannot be obtained by other synthetic routes. The control of the electronic structure of organic/metal interfaces is crucial for defining the performance of many optoelectronic devices. A facile on-surface chemistry route has now been used to synthesize the strong electron-acceptor organic molecule quinoneazine directly on a Cu(110) surface, via thermally activated covalent coupling of para-aminophenol precursors. The mechanism is described using a combination of in situ surface characterization techniques and theoretical methods. Owing to a strong surface-molecule interaction, the quinoneazine molecule accommodates 1.2 electrons at its carbonyl ends, inducing an intramolecular charge redistribution and leading to partial conjugation of the rings, conferring azo-character at the nitrogen sites.

Dissecting the role of NtrC and RpoN in the expression of assimilatory nitrate and nitrite reductases in Bradyrhizobium diazoefficiens.

Bradyrhizobium diazoefficiens, a nitrogen-fixing endosymbiont of soybeans, is a model strain for studying rhizobial denitrification. This bacterium can also use nitrate as the sole nitrogen (N) source during aerobic growth by inducing an assimilatory nitrate reductase encoded by nasC located within the narK-bjgb-flp-nasC operon along with a nitrite reductase encoded by nirA at a different chromosomal locus. The global nitrogen two-component regulatory system NtrBC has been reported to coordinate the expression of key enzymes in nitrogen metabolism in several bacteria. In this study, we demonstrate that disruption of ntrC caused a growth defect in B. diazoefficiens cells in the presence of nitrate or nitrite as the sole N source and a decreased activity of the nitrate and nitrite reductase enzymes. Furthermore, the expression of narK-lacZ or nirA-lacZ transcriptional fusions was significantly reduced in the ntrC mutant after incubation under nitrate assimilation conditions. A B. diazoefficiens rpoN 1/2 mutant, lacking both copies of the gene encoding the alternative sigma factor σ54, was also defective in aerobic growth with nitrate as the N source as well as in nitrate and nitrite reductase expression. These results demonstrate that the NtrC regulator is required for expression of the B. diazoefficiens nasC and nirA genes and that the sigma factor RpoN is also involved in this regulation.

Vacancy formation on C60/Pt (111): unraveling the complex atomistic mechanism.

The interaction of fullerenes with transition metal surfaces leads to the development of an atomic network of ordered vacancies on the metal. However, the structure and formation mechanism of this intricate surface reconstruction is not yet understood at an atomic level. We combine scanning tunneling microscopy, high resolution and temperature programmed-x-ray photoelectrons spectroscopy, and density functional theory calculations to show that the vacancy formation in C60/Pt(111) is a complex process in which fullerenes undergo two significant structural rearrangements upon thermal annealing. At first, the molecules are physisorbed on the surface; next, they chemisorb inducing the formation of an adatom-vacancy pair on the side of the fullerene. Finally, this metastable state relaxes when the adatom migrates away and the vacancy moves under the molecule. The evolution from a weakly-bound fullerene to a chemisorbed state with a vacancy underneath could be triggered by residual H atoms on the surface which prevent a strong surface-adsorbate bonding right after deposition. Upon annealing at about 440 K, when all H has desorbed, the C60 interacts with the Pt surface atoms forming the vacancy-adatom pair. This metastable state induces a small charge transfer and precedes the final adsorption structure.

Fullerenes from aromatic precursors by surface-catalysed cyclodehydrogenation.

Graphite vaporization provides an uncontrolled yet efficient means of producing fullerene molecules. However, some fullerene derivatives or unusual fullerene species might only be accessible through rational and controlled synthesis methods. Recently, such an approach has been used to produce isolable amounts of the fullerene C(60) from commercially available starting materials. But the overall process required 11 steps to generate a suitable polycyclic aromatic precursor molecule, which was then dehydrogenated in the gas phase with a yield of only about one per cent. Here we report the formation of C(60) and the triazafullerene C(57)N(3) from aromatic precursors using a highly efficient surface-catalysed cyclodehydrogenation process. We find that after deposition onto a platinum (111) surface and heating to 750 K, the precursors are transformed into the corresponding fullerene and triazafullerene molecules with about 100 per cent yield. We expect that this approach will allow the production of a range of other fullerenes and heterofullerenes, once suitable precursors are available. Also, if the process is carried out in an atmosphere containing guest species, it might even allow the encapsulation of atoms or small molecules to form endohedral fullerenes.

Association between anti-PL7 antibodies and increased fibrotic component in patients with antisynthetase syndrome and interstitial lung disease: a cross-sectional study.

OBJECTIVE: To evaluate whether anti-PL7 and anti-PL12 autoantibodies are associated with a greater extent of the fibrotic component of ILD in ASSD patients. METHODS: Patients with ILD-ASSD who were positive for one of the following autoantibodies: anti-Jo1, anti-PL7, anti-PL12, and anti-EJ were included. Clinical manifestations, CPK levels, pulmonary function tests, and HCRT assessments were prospectively collected according to the Goh index. The fibrotic, inflammatory, and overall extension of the Goh index and DLCO were assessed by multiple linear analyses and compared between ASSD antibody subgroups. RESULTS: Sixty-six patients were included; 17 were positive for anti-Jo1 (26%), 17 for anti-PL7 (26%), 20 for anti-PL12 (30%), and 9 (14%) for anti-EJ. Patients with anti-PL7 and anti-PL12 had a more extensive fibrotic component than anti-Jo1. Anti-PL7 patients had a 7.9% increase in the fibrotic extension (cß = 7.9; 95% CI 1.863, 13.918), and the strength of the association was not modified after controlling for sex, age, and time of disease evolution (aß = 7.9; 95% CI 0.677, 15.076) and also was associated with an increase in ILD severity after adjusting for the same variables, denoted by a lower DLCO (aß = - 4.47; 95% CI - 8.919 to - 0.015). CONCLUSIONS: Anti-PL7-positive ASSD patients had more extensive fibrosis and severe ILD than the anti-Jo1 subgroup. This information is clinically useful and has significant implications for managing these patients, suggesting the need for early consideration of concurrent immunosuppressive and antifibrotic therapy.

On-surface synthesis of metal-organic frameworks: the critical role of the reaction conditions.

Two different metal-organic frameworks with either a honeycomb or Kagome structure were grown on Cu(111) using para-aminophenol molecules and native surface adatoms. Although both frameworks are made up from the same chemical species, they are structurally different emphasizing the critical role being played by the reaction conditions during their growth. This work highlights the importance of the balance between thermodynamics and kinetics in the final structure of surface-supported metal-organic networks.

Weakly interacting molecular layer of spinning C60 molecules on TiO2 (110) surfaces.

The adsorption of C(60), a typical acceptor organic molecule, on a TiO(2) (110) surface has been investigated by a multitechnique combination, including van der Waals density functional calculations. It is shown that the adsorbed molecules form a weakly interacting molecular layer, which sits on the fivefold-coordinated Ti that is confined between the prominent bridging oxygen rows (see figure).

On-Surface Thermal Stability of a Graphenic Structure Incorporating a Tropone Moiety.

On-surface synthesis, complementary to wet chemistry, has been demonstrated to be a valid approach for the synthesis of tailored graphenic nanostructures with atomic precision. Among the different existing strategies used to tune the optoelectronic and magnetic properties of these nanostructures, the introduction of non-hexagonal rings inducing out-of-plane distortions is a promising pathway that has been scarcely explored on surfaces. Here, we demonstrate that non-hexagonal rings, in the form of tropone (cycloheptatrienone) moieties, are thermally transformed into phenyl or cyclopentadienone moieties upon an unprecedented surface-mediated retro-Buchner-type reaction involving a decarbonylation or an intramolecular rearrangement of the CO unit, respectively.

Implant- and anesthesia-related factors affecting cardiopulmonary threshold intensities for vagus nerve stimulation.

Objective.Vagus nerve stimulation (VNS) is typically delivered at increasing stimulus intensity until a neurological or physiological response is observed ('threshold') for dose calibration, preclinically and therapeutically. Factors affecting VNS thresholds have not been studied systematically. In a rodent model of VNS we measured neural and physiological responses to increasing VNS intensity, determined neurological and physiological thresholds and examined the effect of implant- and anesthesia-related factors on thresholds.Approach.In acute and chronic vagus implants (45 and 20 rats, respectively) VNS was delivered under isoflurane, ketamine-xylazine, or awake conditions. Evoked compound action potentials (CAPs) were recorded and activation of different fiber types was extracted. Elicited physiological responses were registered, including changes in heart rate (HR), breathing rate (BR), and blood pressure (BP). CAP and physiological thresholds were determined.Main results. The threshold for evoking discernable CAPs (>10µV) (CAP threshold) is significantly lower than what elicits 5%-10% drop in heart rate (heart rate threshold, HRT) (25µA ± 1.8 vs. 80µA ± 5.1, respectively; mean ± SEM). Changes in BP and small changes in BR (bradypnea) occur at lowest intensities (70µA ± 8.3), followed by HR changes (80µA ± 5.1) and finally significant changes in BR (apnea) (310µA ± 32.5). HRT and electrode impedance are correlated in chronic (Pearson correlationr= 0.47;p< 0.001) but not in acute implants (r= -0.34;pNS); HRT and impedance both increase with implant age (r= 0.44;p< 0.001 andr= 0.64;p< 0.001, respectively). HRT is lowest when animals are awake (200µA ± 35.5), followed by ketamine-xylazine (640µA ± 151.5), and isoflurane (1000µA ± 139.5). The sequence of physiological responses with increasing VNS intensity is the same in anesthetized and awake animals. Pulsing frequency affects physiological responses but not CAPs.Significance. Implant age, electrode impedance, and type of anesthesia affect VNS thresholds and should be accounted for when calibrating stimulation dose.

Anodal block permits directional vagus nerve stimulation.

Vagus nerve stimulation (VNS) is a bioelectronic therapy for disorders of the brain and peripheral organs, and a tool to study the physiology of autonomic circuits. Selective activation of afferent or efferent vagal fibers can maximize efficacy and minimize off-target effects of VNS. Anodal block (ABL) has been used to achieve directional fiber activation in nerve stimulation. However, evidence for directional VNS with ABL has been scarce and inconsistent, and it is unknown whether ABL permits directional fiber activation with respect to functional effects of VNS. Through a series of vagotomies, we established physiological markers for afferent and efferent fiber activation by VNS: stimulus-elicited change in breathing rate (ΔBR) and heart rate (ΔHR), respectively. Bipolar VNS trains of both polarities elicited mixed ΔHR and ΔBR responses. Cathode cephalad polarity caused an afferent pattern of responses (relatively stronger ΔBR) whereas cathode caudad caused an efferent pattern (stronger ΔHR). Additionally, left VNS elicited a greater afferent and right VNS a greater efferent response. By analyzing stimulus-evoked compound nerve potentials, we confirmed that such polarity differences in functional responses to VNS can be explained by ABL of A- and B-fiber activation. We conclude that ABL is a mechanism that can be leveraged for directional VNS.

Role of the metal surface on the room temperature activation of the alcohol and amino groups of p-aminophenol.

We present a comparative study of the room-temperature adsorption of p-aminophenol (p-AP) molecules on three metal surfaces, namely Cu(110), Cu(111) and Pt(111). We show that the chemical nature and the structural symmetry of the substrate control the activation of the terminal molecular groups, which result in different arrangements of the interfacial molecular layer. To this aim, we have used in-situ STM images combined with synchrotron radiation high resolution XPS and NEXAFS spectra, and the results were simulated by DFT calculations. On copper, the interaction between the molecules and the surface is weaker on the (111) surface crystal plane than on the (110) one, favouring molecular diffusion and leading to larger ordered domains. We demonstrate that the p-AP molecule undergoes spontaneous dehydrogenation of the alcohol group to form phenoxy species on all the studied surfaces, however, this process is not complete on the less reactive surface, Cu(111). The Pt(111) surface exhibits stronger molecule-surface interaction, inducing a short-range ordered molecular arrangement that increases overtime. In addition, on the highly reactive Pt(111) surface other chemical processes are evidenced, such as the dehydrogenation of the amine group.

Versatile Graphene-Based Platform for Robust Nanobiohybrid Interfaces.

Technologically useful and robust graphene-based interfaces for devices require the introduction of highly selective, stable, and covalently bonded functionalities on the graphene surface, whilst essentially retaining the electronic properties of the pristine layer. This work demonstrates that highly controlled, ultrahigh vacuum covalent chemical functionalization of graphene sheets with a thiol-terminated molecule provides a robust and tunable platform for the development of hybrid nanostructures in different environments. We employ this facile strategy to covalently couple two representative systems of broad interest: metal nanoparticles, via S-metal bonds, and thiol-modified DNA aptamers, via disulfide bridges. Both systems, which have been characterized by a multitechnique approach, remain firmly anchored to the graphene surface even after several washing cycles. Atomic force microscopy images demonstrate that the conjugated aptamer retains the functionality required to recognize a target protein. This methodology opens a new route to the integration of high-quality graphene layers into diverse technological platforms, including plasmonics, optoelectronics, or biosensing. With respect to the latter, the viability of a thiol-functionalized chemical vapor deposition graphene-based solution-gated field-effect transistor array was assessed.

Defects of splicing in antithrombin deficiency.

BACKGROUND: There is increasing evidence supporting the relevance of aberrant splicing in multiple disorders. In antithrombin deficiency only 22 intronic mutations affecting splicing sites (7% of SERPINC1 mutations) are considered as splicing mutations. METHODS: SERPINC1 was analyzed by Sanger sequencing and MLPA in 141 unrelated cases with antithrombin deficiency. Plasma antithrombin was studied by functional and western blot assays, purified by FPLC and characterized by proteomic analysis. In silico predictions on splicing was done with the Human Splicing Finder software. RESULTS: We detected 89 different SERPINC1 defects, 13 with potential effect on splicing. Ten cases presented 9 mutations disturbing splicing sites, 5 new. Three gross or small gene defects also disturbed a correct splicing. Interestingly, the first duplication of a single exon ever described (c.1154-13_1218+115dup), caused mild deficiency (75%). A deeper intronic mutation (c.1154-14G>A), identified in three unrelated patients with traces of disulphide dimers of antithrombin in plasma, created a cryptic splicing site that might generate a variant with 4 additional in frame residues according to in silico predictions. This aberrant splicing was confirmed by proteomic analysis of the dimer purified from plasma. CONCLUSIONS: A high proportion of cases with antithrombin deficiency (up to 13%) may be explained by an aberrant splicing. Up to 15% of mutations in SERPINC1: splicing site variations, gross gene defects and deep intronic mutations, may affect a correct splicing with three potential consequences type I, type II, and even moderate antithrombin deficiency.

Highly selective covalent organic functionalization of epitaxial graphene.

Graphene functionalization with organics is expected to be an important step for the development of graphene-based materials with tailored electronic properties. However, its high chemical inertness makes difficult a controlled and selective covalent functionalization, and most of the works performed up to the date report electrostatic molecular adsorption or unruly functionalization. We show hereafter a mechanism for promoting highly specific covalent bonding of any amino-terminated molecule and a description of the operating processes. We show, by different experimental techniques and theoretical methods, that the excess of charge at carbon dangling-bonds formed on single-atomic vacancies at the graphene surface induces enhanced reactivity towards a selective oxidation of the amino group and subsequent integration of the nitrogen within the graphene network. Remarkably, functionalized surfaces retain the electronic properties of pristine graphene. This study opens the door for development of graphene-based interfaces, as nano-bio-hybrid composites, fabrication of dielectrics, plasmonics or spintronics.

[Mitral valve repair for mitral regurgitation]. / Cirugía de reparación valvular en la regurgitación mitral.

We analyzed the results of mitral valve repair in 81 consecutive patients with severe mitral regurgitation. Of these patients, 66.6% had myxomatous degeneration, 11% ischemic disease, 8% chordal rupture, 5% congenital disease, and 3.7% endocarditis. Repair could not be achieved in five patients, and valve replacement was necessary. Six died during surgery (mortality 7%). During follow-up (mean 30 [8] months), there was one death due to refractory ischemic heart failure and mitral regurgitation (>or= 2/4) was observed in 11 patients. A good result (i.e., survival without a prosthesis, major complications, or mitral regurgitation >1/4) was obtained in 78% of patients with myxomatous degeneration versus 48% of those with other etiologies (P=.023). A good result was obtained more frequently in cases of isolated posterior cusp degeneration than in those involving degeneration of both cusps (85% vs 70%; P=.03).

Role of the Pinning Points in epitaxial Graphene Moiré Superstructures on the Pt(111) Surface.

The intrinsic atomic mechanisms responsible for electronic doping of epitaxial graphene Moirés on transition metal surfaces is still an open issue. To better understand this process we have carried out a first-principles full characterization of the most representative Moiré superstructures observed on the Gr/Pt(111) system and confronted the results with atomically resolved scanning tunneling microscopy experiments. We find that for all reported Moirés the system relaxes inducing a non-negligible atomic corrugation both, at the graphene and at the outermost platinum layer. Interestingly, a mirror "anti-Moiré" reconstruction appears at the substrate, giving rise to the appearance of pinning-points. We show that these points are responsible for the development of the superstructure, while charge from the Pt substrate is injected into the graphene, inducing a local n-doping, mostly localized at these specific pinning-point positions.

On-surface self-organization of a robust metal-organic cluster based on copper(I) with chloride and organosulphur ligands.

Direct sublimation of a Cu4Cl4 metal-organic cluster on Cu(110) under ultra-high vacuum allows the formation of ultra-large well-organized metal-organic supramolecular wires. Our results show that the large monomers assemble with each other by π-π interactions connecting dipyrimidine units and are stabilized by the surface.