Engineered SARS-CoV-2 receptor binding domain improves manufacturability in yeast and immunogenicity in mice.

Global containment of COVID-19 still requires accessible and affordable vaccines for low- and middle-income countries (LMICs). Recently approved vaccines provide needed interventions, albeit at prices that may limit their global access. Subunit vaccines based on recombinant proteins are suited for large-volume microbial manufacturing to yield billions of doses annually, minimizing their manufacturing cost. These types of vaccines are well-established, proven interventions with multiple safe and efficacious commercial examples. Many vaccine candidates of this type for SARS-CoV-2 rely on sequences containing the receptor-binding domain (RBD), which mediates viral entry to cells via ACE2. Here we report an engineered sequence variant of RBD that exhibits high-yield manufacturability, high-affinity binding to ACE2, and enhanced immunogenicity after a single dose in mice compared to the Wuhan-Hu-1 variant used in current vaccines. Antibodies raised against the engineered protein exhibited heterotypic binding to the RBD from two recently reported SARS-CoV-2 variants of concern (501Y.V1/V2). Presentation of the engineered RBD on a designed virus-like particle (VLP) also reduced weight loss in hamsters upon viral challenge.

Modular development enables rapid design of media for alternative hosts.

Developing media to sustain cell growth and production is an essential and ongoing activity in bioprocess development. Modifications to media can often address host or product-specific challenges, such as low productivity or poor product quality. For other applications, systematic design of new media can facilitate the adoption of new industrially relevant alternative hosts. Despite manifold existing methods, common approaches for optimization often remain time and labor-intensive. We present here a novel approach to conventional media blending that leverages stable, simple, concentrated stock solutions to enable rapid improvement of measurable phenotypes of interest. We applied this modular methodology to generate high-performing media for two phenotypes of interest: biomass accumulation and heterologous protein production, using high-throughput, milliliter-scale batch fermentations of Pichia pastoris as a model system. In addition to these examples, we also created a flexible open-source package for modular blending automation on a low-cost liquid handling system to facilitate wide use of this method. Our modular blending method enables rapid, flexible media development, requiring minimal labor investment and prior knowledge of the host organism, and should enable developing improved media for other hosts and phenotypes of interest.

Rapid optimization of processes for the integrated purification of biopharmaceuticals.

Straight-through chromatography, wherein the eluate from one column passes directly onto another column without adjustment, is one strategy to integrate and intensify manufacturing processes for biologics. Development and optimization of such straight-through chromatographic processes is a challenge, however. Conventional high-throughput screening methods optimize each chromatographic step independently, with limited consideration for the connectivity of steps. Here, we demonstrate a method for the development and optimization of fully integrated, multi-column processes for straight-through purification. Selection of resins was performed using an in silico tool for the prediction of processes for straight-through purification based on a one-time characterization of host-cell proteins combined with the chromatographic behavior of the product. A two-step optimization was then conducted to determine the buffer conditions that maximized yield while minimizing process- and product-related impurities. This optimization of buffer conditions included a series of range-finding experiments on each individual column, similar to conventional screening, followed by the development of a statistical model for the fully integrated, multi-column process using design of experiments. We used this methodology to develop and optimize integrated purification processes for a single-domain antibody and a cytokine, obtaining yields of 88% and 86%, respectively, with process- and product-related variants reduced to phase-appropriate levels for nonclinical material.

Modeling of copy number variability in Pichia pastoris.

Development of continuous biopharmaceutical manufacturing processes is an area of active research. This study considers the long-term transgene copy number stability of Pichia pastoris in continuous bioreactors. We propose a model of copy number loss that quantifies population heterogeneity. An analytical solution is derived and compared with existing experimental data. The model is then used to provide guidance for stable operating timescales. The model is extended to consider copy number dependent growth such as in the case of Zeocin supplementation. The model is also extended to analyze a continuous seeding strategy. This study is a critical step towards understanding the impact of continuous processing on the stability of Pichia pastoris and the resultant products.

Macroscopic modeling of bioreactors for recombinant protein producing Pichia pastoris in defined medium.

The methylotrophic yeast Pichia pastoris is widely used as a microbial host for recombinant protein production. Bioreactor models for P. pastoris can inform understanding of cellular metabolism and can be used to optimize bioreactor operation. This article constructs an extensive macroscopic bioreactor model for P. pastoris which describes substrates, biomass, total protein, other medium components, and off-gas components. Species and elemental balances are introduced to describe uptake and evolution rates for medium components and off-gas components. Additionally, a pH model is constructed using an overall charge balance, acid/base equilibria, and activity coefficients to describe production of recombinant protein and precipitation of medium components. The extent of run-to-run variability is modeled by distributions of a subset of the model parameters, which are estimated using the maximum likelihood method. Model prediction from the extensive macroscopic bioreactor model well describes experimental data with different operating conditions. The probability distributions of the model predictions quantified from the parameter distribution are quantifiably consistent with the run-to-run variability observed in the experimental data. The uncertainty description in this macroscopic bioreactor model identifies the model parameters that have large variability and provides guidance as to which aspects of cellular metabolism should be the focus of additional experimental studies. The model for medium components with pH and precipitation can be used for improving chemically defined medium by minimizing the amount of components needed while meeting cellular requirements.

Development of a platform process for the production and purification of single-domain antibodies.

Single-domain antibodies (sdAbs) offer the affinity and therapeutic value of conventional antibodies, with increased stability and solubility. Unlike conventional antibodies, however, sdAbs do not benefit from a platform manufacturing process. While successful production of a variety of sdAbs has been shown in numerous hosts, purification methods are often molecule specific or require affinity tags, which generally cannot be used in clinical manufacturing due to regulatory concerns. Here, we have developed a broadly applicable production and purification process for sdAbs in Komagataella phaffii (Pichia pastoris) and demonstrated the production of eight different sdAbs at a quality appropriate for nonclinical studies. We developed a two-step, integrated purification process without the use of affinity resins and showed that modification of a single process parameter, pH of the bridging buffer, was required for the successful purification of a variety of sdAbs. Further, we determined that this parameter can be predicted based only on the biophysical characteristics of the target molecule. Using these methods, we produced nonclinical quality sdAbs as few as 5 weeks after identifying the product sequence. Nonclinical studies of three different sdAbs showed that molecules produced using our platform process conferred protection against viral shedding of rotavirus or H1N1 influenza and were equivalent to similar molecules produced in Escherichia coli and purified using affinity tags.

Molecular engineering improves antigen quality and enables integrated manufacturing of a trivalent subunit vaccine candidate for rotavirus.

BACKGROUND: Vaccines comprising recombinant subunit proteins are well-suited to low-cost and high-volume production for global use. The design of manufacturing processes to produce subunit vaccines depends, however, on the inherent biophysical traits presented by an individual antigen of interest. New candidate antigens typically require developing custom processes for each one and may require unique steps to ensure sufficient yields without product-related variants. RESULTS: We describe a holistic approach for the molecular design of recombinant protein antigens-considering both their manufacturability and antigenicity-informed by bioinformatic analyses such as RNA-seq, ribosome profiling, and sequence-based prediction tools. We demonstrate this approach by engineering the product sequences of a trivalent non-replicating rotavirus vaccine (NRRV) candidate to improve titers and mitigate product variants caused by N-terminal truncation, hypermannosylation, and aggregation. The three engineered NRRV antigens retained their original antigenicity and immunogenicity, while their improved manufacturability enabled concomitant production and purification of all three serotypes in a single, end-to-end perfusion-based process using the biotechnical yeast Komagataella phaffii. CONCLUSIONS: This study demonstrates that molecular engineering of subunit antigens using advanced genomic methods can facilitate their manufacturing in continuous production. Such capabilities have potential to lower the cost and volumetric requirements in manufacturing vaccines based on recombinant protein subunits.

The application of HPLC/MS analysis with a multi-enzyme digest strategy to characterize different interferon product variants produced from Pichia pastoris.

Interferons are signaling proteins that belong to the large class of cytokines and human interferons which are classified based on the type of receptor interactions: type I, II and III. IFNα2b belongs to the type I interferon class with a major therapeutic application for the treatment of hepatitis B and C infections. A recombinant form of IFNα2b expressed in E. coli, known as IntronA, has been approved by US Food and Drug Administration (FDA). IFN γ, also known as type II interferon, plays a significant role in the inhibition of viral replication. Actimmune® is a US Food and Drug Administration (FDA) approved version of IFN γ for the indication of reducing infections associated with chronic granulomatous disease and severe malignant osteopetrosis. In this study we have applied advanced analytical methods for the characterization of IFNα2b and IFN γ produced from Pichia pastoris. The multi-enzyme digestion approach has been developed to allow measurement of 100% sequence coverage and detailed analysis of post-translational variants and degradation products. In this manner, we identified the following variants in IFN α2b: N-terminal residual leader sequence, an amino acid substitution, oxidation of methionine residues and two sites of high mannose N-glycosylation. In the Pichia IFN γ produced material, our approach detected variants resulting from glycosylation, C-terminal proteolysis, oxidation of methionine residues and deamidation. In this manner, the analytical program was able to support rapid process development as well as identify product variants and degradation products in the resulting product.

A combined screening and in silico strategy for the rapid design of integrated downstream processes for process and product-related impurity removal.

Integrated designs of chromatographic processes for purification of biopharmaceuticals provides potential gains in operational efficiency and reductions of costs and material requirements. We describe a combined method using screening and in silico algorithms for ranking chromatographic steps to rapidly design orthogonally selective integrated processes for purifying protein therapeutics from both process- and product-related impurities. IFN-α2b produced in Pichia pastoris containing a significant product variant challenge was used as a case study. The product and product-related variants were screened on a set of 14 multimodal, ion exchange, and hydrophobic charge induction chromatography resins under various pH and salt linear gradient conditions. Data generated from reversed-phase chromatography of the fractions collected were used to generate a retention database for IFN-α2b and its variants. These data, in combination with a previously constructed process-related impurity database for P. pastoris, were input into an in silico process development tool that generated and ranked all possible integrated chromatographic sequences for their ability to remove both process and product-related impurities. Top-ranking outputs guided the experimental refinement of two successful three step purification processes, one comprising all bind-elute steps and the other having two bind-elute steps and a flowthrough operation. This approach suggests a new platform-like approach for rapidly designing purification processes for a range of proteins where separations of both process- and product-related impurities are needed.

Development of a general defined medium for Pichia pastoris.

Pichia pastoris is widely used as a host for recombinant protein production. More than 500 proteins have been expressed in the organism at a variety of cultivation scales, from small shake flasks to large bioreactors. Large-scale fermentation strategies typically employ chemically defined growth medium because of its greater batch-to-batch consistency and in many cases, lower costs compared to complex medium. For biopharmaceuticals, defined growth medium may also simplify downstream purification and regulatory documentation. Standard formulations of defined media for P. pastoris are minimal ones that lack the metabolic intermediates provided by complex components such as peptone and yeast extract. As a result, growth rates and per-cell productivities are significantly lower than in complex medium. We have designed a rich defined medium (RDM) for Pichia pastoris by systematically evaluating nutrients of increasing complexity and identifying those that are most critical for growth. We have also employed transcriptomics to gain deeper insights into the underlying metabolic processes and inform our media design. We have demonstrated that using RDM for expression of three heterologous proteins yields titers comparable to, or higher than, those in standard complex medium. RDM improves productivity of P. pastoris fermentations and its development demonstrates the usefulness of transcriptomics to accelerate process development for new molecules.

Cover Image, Volume 115, Number 1, January 2018.

Cover Legend: The cover image, by Catherine B. Matthews et al., is based on the Article Development of a general defined medium for Pichia pastoris, DOI 10.1002/bit.26440.

An impurity characterization based approach for the rapid development of integrated downstream purification processes.

In this study, we describe a new approach for the characterization of process-related impurities along with an in silico tool to generate orthogonal, integrated downstream purification processes for biological products. A one-time characterization of process-related impurities from product expression in Pichia pastoris was first carried out using linear salt and pH gradients on a library of multimodal, salt-tolerant, and hydrophobic charge induction chromatographic resins. The Reversed-phase ultra-performance liquid chromatography (UPLC) analysis of the fractions from these gradients was then used to generate large data sets of impurity profiles. A retention database of the biological product was also generated using the same linear salt and pH gradients on these resins, without fraction collection. The resulting two data sets were then analyzed using an in silico tool, which incorporated integrated manufacturing constraints to generate and rank potential three-step purification sequences based on their predicted purification performance as well as whole-process "orthogonality" for impurity removal. Highly ranked sequences were further examined to identify templates for process development. The efficacy of this approach was successfully demonstrated for the rapid development of robust integrated processes for human growth hormone and granulocyte-colony stimulating factor.

Characterization of Site-Specific Glycosylation in Influenza A Virus Hemagglutinin Produced by Spodoptera frugiperda Insect Cell Line.

Influenza hemagglutinin is a surface glycoprotein related to virus invasion and host immune system response. Understanding site specific glycosylation of hemagglutinin will increase our knowledge about virus evolution and can improve the design and quality of vaccines. In our study, we used glycoproteomic analysis based on multienzyme digestion followed by LC tandem MS analysis to determine the glycosylation of Influenza hemagglutinin (H1/A/California/04/2009) using the following steps: PNGaseF treatment combined with trypsin or pepsin digestion was used to determine the glycosites and glycan occupancy. Three enzymes, trypsin, AspN, and pepsin, were used separately to generate suitable glycopeptides for online LC tandem MS analysis. The glycan structure of a given glycopeptide was determined by collision-induced dissociation MS/MS fragmentation, and the peptide backbone information was provided by collision-induced dissociation (CID)-MS3 fragmentation. With this approach, 100% sequence coverage of the hemagglutinin sample was obtained. Six glycosylation sites fitting the sequon N-X-S/T were successfully confirmed, and the glycan heterogeneity as well as the ratios of glycoforms were determined at each site.

Integrated Bottom-Up and Top-Down Liquid Chromatography-Mass Spectrometry for Characterization of Recombinant Human Growth Hormone Degradation Products.

With the advent of biosimilars to the U.S. market, it is important to have better analytical tools to ensure product quality from batch to batch. In addition, the recent popularity of using a continuous process for production of biopharmaceuticals, the traditional bottom-up method, alone for product characterization and quality analysis is no longer sufficient. Bottom-up method requires large amounts of material for analysis and is labor-intensive and time-consuming. Additionally, in this analysis, digestion of the protein with enzymes such as trypsin could induce artifacts and modifications which would increase the complexity of the analysis. On the other hand, a top-down method requires a minimum amount of sample and allows for analysis of the intact protein mass and sequence generated from fragmentation within the instrument. However, fragmentation usually occurs at the N-terminal and C-terminal ends of the protein with less internal fragmentation. Herein, we combine the use of the complementary techniques, a top-down and bottom-up method, for the characterization of human growth hormone degradation products. Notably, our approach required small amounts of sample, which is a requirement due to the sample constraints of small scale manufacturing. Using this approach, we were able to characterize various protein variants, including post-translational modifications such as oxidation and deamidation, residual leader sequence, and proteolytic cleavage. Thus, we were able to highlight the complementarity of top-down and bottom-up approaches, which achieved the characterization of a wide range of product variants in samples of human growth hormone secreted from Pichia pastoris.

Comparative genomics and transcriptomics of Pichia pastoris.

BACKGROUND: Pichia pastoris has emerged as an important alternative host for producing recombinant biopharmaceuticals, owing to its high cultivation density, low host cell protein burden, and the development of strains with humanized glycosylation. Despite its demonstrated utility, relatively little strain engineering has been performed to improve Pichia, due in part to the limited number and inconsistent frameworks of reported genomes and transcriptomes. Furthermore, the co-mingling of genomic, transcriptomic and fermentation data collected about Komagataella pastoris and Komagataella phaffii, the two strains co-branded as Pichia, has generated confusion about host performance for these genetically distinct species. Generation of comparative high-quality genomes and transcriptomes will enable meaningful comparisons between the organisms, and potentially inform distinct biotechnological utilies for each species. RESULTS: Here, we present a comprehensive and standardized comparative analysis of the genomic features of the three most commonly used strains comprising the tradename Pichia: K. pastoris wild-type, K. phaffii wild-type, and K. phaffii GS115. We used a combination of long-read (PacBio) and short-read (Illumina) sequencing technologies to achieve over 1000X coverage of each genome. Construction of individual genomes was then performed using as few as seven individual contigs to create gap-free assemblies. We found substantial syntenic rearrangements between the species and characterized a linear plasmid present in K. phaffii. Comparative analyses between K. phaffii genomes enabled the characterization of the mutational landscape of the GS115 strain. We identified and examined 35 non-synonomous coding mutations present in GS115, many of which are likely to impact strain performance. Additionally, we investigated transcriptomic profiles of gene expression for both species during cultivation on various carbon sources. We observed that the most highly transcribed genes in both organisms were consistently highly expressed in all three carbon sources examined. We also observed selective expression of certain genes in each carbon source, including many sequences not previously reported as promoters for expression of heterologous proteins in yeasts. CONCLUSIONS: Our studies establish a foundation for understanding critical relationships between genome structure, cultivation conditions and gene expression. The resources we report here will inform and facilitate rational, organism-wide strain engineering for improved utility as a host for protein production.

Automated pipeline for rapid production and screening of HIV-specific monoclonal antibodies using pichia pastoris.

Monoclonal antibodies (mAbs) that bind and neutralize human pathogens have great therapeutic potential. Advances in automated screening and liquid handling have resulted in the ability to discover antigen-specific antibodies either directly from human blood or from various combinatorial libraries (phage, bacteria, or yeast). There remain, however, bottlenecks in the cloning, expression and evaluation of such lead antibodies identified in primary screens that hinder high-throughput screening. As such, "hit-to-lead identification" remains both expensive and time-consuming. By combining the advantages of overlap extension PCR (OE-PCR) and a genetically stable yet easily manipulatable microbial expression host Pichia pastoris, we have developed an automated pipeline for the rapid production and screening of full-length antigen-specific mAbs. Here, we demonstrate the speed, feasibility and cost-effectiveness of our approach by generating several broadly neutralizing antibodies against human immunodeficiency virus (HIV).

Simplified Gene Knockout by CRISPR-Cas9-Induced Homologous Recombination.

Genetic engineering of industrial cell lines often requires knockout of multiple endogenous genes. Tools like CRISPR-Cas9 have enabled serial or parallelized gene disruption in a wide range of industrial organisms, but common practices for the screening and validation of genome edits are lacking. For gene disruption, DNA repair by homologous recombination offers several advantages over nonhomologous end joining, including more efficient screening for knockout clones and improved genomic stability. Here we designed and characterized a knockout fragment intended to repair Cas9-induced gene disruptions by homologous recombination. We identified knockout clones of Komagataella phaffii with high fidelity by PCR, removing the need for Sanger sequencing. Short overlap sequences for homologous recombination (30 bp) enabled the generation of gene-specific knockout fragments by PCR, removing the need for subcloning. Finally, we demonstrated that the genotype conferred by the knockout fragment is stable under common cultivation conditions.

Mechanism of Thimerosal-Induced Structural Destabilization of a Recombinant Rotavirus P[4] Protein Antigen Formulated as a Multi-Dose Vaccine.

In a companion paper, a two-step developability assessment is presented to rapidly evaluate low-cost formulations (multi-dose, aluminum-adjuvanted) for new subunit vaccine candidates. As a case study, a non-replicating rotavirus (NRRV) recombinant protein antigen P[4] was found to be destabilized by the vaccine preservative thimerosal, and this effect was mitigated by modification of the free cysteine (C173S). In this work, the mechanism(s) of thimerosal-P[4] protein interactions, along with subsequent effects on the P[4] protein's structural integrity, are determined. Reversible complexation of ethylmercury, a thimerosal degradation byproduct, with the single cysteine residue of P[4] protein is demonstrated by intact protein mass analysis and biophysical studies. A working mechanism involving a reversible S-Hg coordinate bond is presented based on the literature. This reaction increased the local backbone flexibility of P[4] within the helical region surrounding the cysteine residue and then caused more global destabilization, both as detected by HX-MS. These effects correlate with changes in antibody-P[4] binding parameters and alterations in P[4] conformational stability due to C173S modification. Epitope mapping by HX-MS demonstrated involvement of the same cysteine-containing helical region of P[4] in antibody-antigen binding. Future formulation challenges to develop low-cost, multi-dose formulations for new recombinant protein vaccine candidates are discussed.