Multifunctional ytterbium oxide buffer for perovskite solar cells.

Perovskite solar cells (PSCs) comprise a solid perovskite absorber sandwiched between several layers of different charge-selective materials, ensuring unidirectional current flow and high voltage output of the devices1,2. A 'buffer material' between the electron-selective layer and the metal electrode in p-type/intrinsic/n-type (p-i-n) PSCs (also known as inverted PSCs) enables electrons to flow from the electron-selective layer to the electrode3-5. Furthermore, it acts as a barrier inhibiting the inter-diffusion of harmful species into or degradation products out of the perovskite absorber6-8. Thus far, evaporable organic molecules9,10 and atomic-layer-deposited metal oxides11,12 have been successful, but each has specific imperfections. Here we report a chemically stable and multifunctional buffer material, ytterbium oxide (YbOx), for p-i-n PSCs by scalable thermal evaporation deposition. We used this YbOx buffer in the p-i-n PSCs with a narrow-bandgap perovskite absorber, yielding a certified power conversion efficiency of more than 25%. We also demonstrate the broad applicability of YbOx in enabling highly efficient PSCs from various types of perovskite absorber layer, delivering state-of-the-art efficiencies of 20.1% for the wide-bandgap perovskite absorber and 22.1% for the mid-bandgap perovskite absorber, respectively. Moreover, when subjected to ISOS-L-3 accelerated ageing, encapsulated devices with YbOx exhibit markedly enhanced device stability.

Coherent growth of high-Miller-index facets enhances perovskite solar cells.

Obtaining micron-thick perovskite films of high quality is key to realizing efficient and stable positive (p)-intrinsic (i)-negative (n) perovskite solar cells1,2, but it remains a critical challenge. Here, we report an effective method for producing high-quality, micron-thick formamidinium-based perovskite films by forming coherent grain boundaries, where high-Miller-index-oriented grains grow on the low-Miller-index-oriented grains in a stabilized atmosphere. The resulting micron-thick perovskite films, with enhanced grain boundaries and grains, showed stable material properties and outstanding optoelectronic performances. The small-area solar cells achieved efficiencies of 26.1%. The 1-square-centimeter devices and 5 cm × 5 cm minimodules delivered efficiencies of 24.3% and 21.4%, respectively. The devices processed in a stabilized atmosphere presented a high reproducibility across all four seasons. The encapsulated devices exhibited superior long-term stability under both light and thermal stressors in ambient air.

Suppressed phase segregation for triple-junction perovskite solar cells.

The tunable bandgaps and facile fabrication of perovskites make them attractive for multi-junction photovoltaics1,2. However, light-induced phase segregation limits their efficiency and stability3-5: this occurs in wide-bandgap (>1.65 electron volts) iodide/bromide mixed perovskite absorbers, and becomes even more acute in the top cells of triple-junction solar photovoltaics that require a fully 2.0-electron-volt bandgap absorber2,6. Here we report that lattice distortion in iodide/bromide mixed perovskites is correlated with the suppression of phase segregation, generating an increased ion-migration energy barrier arising from the decreased average interatomic distance between the A-site cation and iodide. Using an approximately 2.0-electron-volt rubidium/caesium mixed-cation inorganic perovskite with large lattice distortion in the top subcell, we fabricated all-perovskite triple-junction solar cells and achieved an efficiency of 24.3 per cent (23.3 per cent certified quasi-steady-state efficiency) with an open-circuit voltage of 3.21 volts. This is, to our knowledge, the first reported certified efficiency for perovskite-based triple-junction solar cells. The triple-junction devices retain 80 per cent of their initial efficiency following 420 hours of operation at the maximum power point.

Distribution control enables efficient reduced-dimensional perovskite LEDs.

Light-emitting diodes (LEDs) based on perovskite quantum dots have shown external quantum efficiencies (EQEs) of over 23% and narrowband emission, but suffer from limited operating stability1. Reduced-dimensional perovskites (RDPs) consisting of quantum wells (QWs) separated by organic intercalating cations show high exciton binding energies and have the potential to increase the stability and the photoluminescence quantum yield2,3. However, until now, RDP-based LEDs have exhibited lower EQEs and inferior colour purities4-6. We posit that the presence of variably confined QWs may contribute to non-radiative recombination losses and broadened emission. Here we report bright RDPs with a more monodispersed QW thickness distribution, achieved through the use of a bifunctional molecular additive that simultaneously controls the RDP polydispersity while passivating the perovskite QW surfaces. We synthesize a fluorinated triphenylphosphine oxide additive that hydrogen bonds with the organic cations, controlling their diffusion during RDP film deposition and suppressing the formation of low-thickness QWs. The phosphine oxide moiety passivates the perovskite grain boundaries via coordination bonding with unsaturated sites, which suppresses defect formation. This results in compact, smooth and uniform RDP thin films with narrowband emission and high photoluminescence quantum yield. This enables LEDs with an EQE of 25.6% with an average of 22.1 ±1.2% over 40 devices, and an operating half-life of two hours at an initial luminance of 7,200 candela per metre squared, indicating tenfold-enhanced operating stability relative to the best-known perovskite LEDs with an EQE exceeding 20%1,4-6.

In situcell-scale probing nucleation, growth and evolution of CsPbBr3nanowires by optical absorption spectroscopy.

The growth kinetics of colloidal lead halide perovskite nanomaterials are an integral part of their applications, remains poorly understood due to complex nucleation processes and lack ofin situsize monitoring method. Here we demonstrated that absorption spectra can be used to observein situgrowth processes of ultrathin CsPbBr3nanowires in solution with reference to the effective mass infinite deep square potential well model. By means of this method, we have found that the ultrathin nanowires, fabricated by hot injection method, were firstly formed within one minute. Subsequently, they merge with each other into a thicker structure with increasing reaction time. We revealed that the nucleation, growth, and merging of the CsPbBr3nanowires are determined by the acid concentration and ligand chain length. At lower acidity, the critical nucleation size of the nanowire is smaller, while the shorter the ligand chain length, the faster the merging among the nanowires. Moreover, the merging mode between nanowires changed with their nucleation size. This growth kinetics of CsPbBr3nanowires provides a reference for optimizing the synthesis conditions to obtain the one-dimensional CsPbBr3with desired size, thus enabling accurate control of the nanowire shape.

Bifunctional Electron-Transporting Agent for Red Colloidal Quantum Dot Light-Emitting Diodes.

Indium phosphide (InP) quantum dots have enabled light-emitting diodes (LEDs) that are heavy-metal-free, narrow in emission linewidth, and physically flexible. However, ZnO/ZnMgO, the electron-transporting layer (ETL) in high-performance red InP/ZnSe/ZnS LEDs, suffers from high defect densities, quenches luminescence when deposited on InP, and induces performance degradation that arises due to trap migration from the ETL to the InP emitting layer. We posited that the formation of Zn2+ traps on the outer ZnS shell, combined with sulfur and oxygen vacancy migration between ZnO/ZnMgO and InP, may account for this issue. We synthesized therefore a bifunctional ETL (CNT2T, 3',3'″,3'″″-(1,3,5-triazine-2,4,6-triyl)tris(([1,1'-biphenyl]-3-carbonitrile)) designed to passivate Zn2+ traps locally and in situ and to prevent vacancy migration between layers: the backbone of the small molecule ETL contains a triazine electron-withdrawing unit to ensure sufficient electron mobility (6 × 10-4 cm2 V-1 s-1), and the star-shaped structure with multiple cyano groups provides effective passivation of the ZnS surface. We report as a result red InP LEDs having an EQE of 15% and a luminance of over 12,000 cd m-2; this represents a record among organic-ETL-based red InP LEDs.

Influence of Volatile Organic Compound Adsorption on the Characteristics of Organic Field-Effect Transistors and Rules for Gas-Sensing Measurements.

Owing to the advantages of organic field-effect transistors (OFETs) in the versatility of organic synthesis, multiparameter measurement, and signal amplification, sensors based on OFETs have received increasing attention for detecting volatile organic compounds (VOCs). However, false device operation and gas-sensing measurements often occur to vitiate the advantages of OFETs and even output error gas-sensing signals. In this work, by experimentally and theoretically studying the effects of VOC adsorption on the operational characteristics of the OFET, the proper operations of OFETs in gas-sensing measurements were clarified. The multiparameter measurements of OFETs showed that the source-drain current was the optimized parameter for achieving high responsivity, and other OFET parameters could be used for fingerprint analysis. By operating OFETs in the near-threshold region, the amplification effect was switched to enhance the responsivity by orders of magnitude to VOCs, while in the overthreshold region, the OFETs had a low signal-to-noise ratio. Besides, a counteraction effect and an uncertainty effect were discovered, leading to error gas-sensing signals. A theoretical study was carried out to reveal the dependency of the gas-sensing properties of OFETs on VOC adsorption. A series of rules were proposed for guiding the measurements of OFET sensors by taking full advantage of transistors in gas-sensing applications.

Strain analysis and engineering in halide perovskite photovoltaics.

Halide perovskites are a compelling candidate for the next generation of clean-energy-harvesting technologies owing to their low cost, facile fabrication and outstanding semiconductor properties. However, photovoltaic device efficiencies are still below practical limits and long-term stability challenges hinder their practical application. Current evidence suggests that strain in halide perovskites is a key factor in dictating device efficiency and stability. Here we outline the fundamentals of strain within halide perovskites relevant to photovoltaic applications and rationalize approaches to characterize the phenomenon. We examine recent breakthroughs in eliminating the adverse impacts of strain, enhancing both device efficiencies and operational stabilities. Finally, we discuss further challenges and outline future research directions for placing stress and strain studies at the forefront of halide perovskite research. An extensive understanding of strain in halide perovskites is needed, which would allow effective strain management and drive further enhancements in efficiencies and stabilities of perovskite photovoltaics.

Enhanced CO2 Photocatalysis by Indium Oxide Hydroxide Supported on TiN@TiO2 Nanotubes.

Herein is developed a ternary heterostructured catalyst, based on a periodic array of 1D TiN nanotubes, with a TiO2 nanoparticulate intermediate layer and a In2O3-x(OH)y nanoparticulate shell for improved performance in the photocatalytic reverse water gas shift reaction. It is demonstrated that the ordering of the three components in the heterostructure sensitively determine its activity in CO2 photocatalysis. Specifically, TiN nanotubes not only provide a photothermal driving force for the photocatalytic reaction, owing to their strong optical absorption properties, but they also serve as a crucial scaffold for minimizing the required quantity of In2O3-x(OH)y nanoparticles, leading to an enhanced CO production rate. Simultaneously, the TiO2 nanoparticle layer supplies photogenerated electrons and holes that are transferred to active sites on In2O3-x(OH)y nanoparticles and participate in the reactions occurring at the catalyst surface.

Bright and Stable Light-Emitting Diodes Based on Perovskite Quantum Dots in Perovskite Matrix.

Light-emitting diodes (LEDs) based on metal halide perovskite quantum dots (QDs) have achieved impressive external quantum efficiencies; however, the lack of surface protection of QDs, combined with efficiency droop, decreases device operating lifetime at brightnesses of interest. The epitaxial incorporation of QDs within a semiconducting shell provides surface passivation and exciton confinement. Achieving this goal in the case of perovskite QDs remains an unsolved challenge in view of the materials' chemical instability. Here, we report perovskite QDs that remain stable in a thin layer of precursor solution of perovskite, and we use strained QDs as nucleation centers to drive the homogeneous crystallization of a perovskite matrix. Type-I band alignment ensures that the QDs are charge acceptors and radiative emitters. The new materials show suppressed Auger bi-excition recombination and bright luminescence at high excitation (600 W cm-2), whereas control materials exhibit severe bleaching. Primary red LEDs based on the new materials show an external quantum efficiency of 18%, and these retain high performance to brightnesses exceeding 4700 cd m-2. The new materials enable LEDs having an operating half-life of 2400 h at an initial luminance of 100 cd m-2, representing a 100-fold enhancement relative to the best primary red perovskite LEDs.

Ligand-Assisted Reconstruction of Colloidal Quantum Dots Decreases Trap State Density.

Increasing the power conversion efficiency (PCE) of colloidal quantum dot (CQD) solar cells has relied on improving the passivation of CQD surfaces, enhancing CQD coupling and charge transport, and advancing device architecture. The presence of hydroxyl groups on the nanoparticle surface, as well as dimers-fusion between CQDs-has been found to be the major source of trap states, detrimental to optoelectronic properties and device performance. Here, we introduce a CQD reconstruction step that decreases surface hydroxyl groups and dimers simultaneously. We explored the dynamic interaction of charge carriers between band-edge states and trap states in CQDs using time-resolved spectroscopy, showing that trap to ground-state recombination occurs mainly from surface defects in coupled CQD solids passivated using simple metal halides. Using CQD reconstruction, we demonstrate a 60% reduction in trap density and a 25% improvement in charge diffusion length. These translate into a PCE of 12.5% compared to 10.9% for control CQDs.

An Electroactive Pure Organic Room-Temperature Phosphorescence Polymer Based on a Donor-Oxygen-Acceptor Geometry.

An electroactive room-temperature phosphorescence (RTP) polymer has been demonstrated based on a characteristic donor-oxygen-acceptor geometry. Compared with the donor-acceptor reference, the inserted oxygen atom between donor and acceptor can not only decrease hole-electron orbital overlap to suppress the charge transfer fluorescence, but also strengthen spin-orbital coupling effect to facilitate the intersystem crossing and subsequent phosphorescence channels. As a result, a significant RTP is observed in solid states under photo excitation. Most noticeably, the corresponding polymer light-emitting diodes (PLEDs) reveal a dominant electrophosphorescence with a record-high external quantum efficiency of 9.7 %. The performance goes well beyond the 5 % theoretical limit for typical fluors, opening a new door to the development of pure organic RTP polymers towards efficient PLEDs.

All-Inorganic Quantum-Dot LEDs Based on a Phase-Stabilized α-CsPbI3 Perovskite.

The all-inorganic nature of CsPbI3 perovskites allows to enhance stability in perovskite devices. Research efforts have led to improved stability of the black phase in CsPbI3 films; however, these strategies-including strain and doping-are based on organic-ligand-capped perovskites, which prevent perovskites from forming the close-packed quantum dot (QD) solids necessary to achieve high charge and thermal transport. We developed an inorganic ligand exchange that leads to CsPbI3 QD films with superior phase stability and increased thermal transport. The atomic-ligand-exchanged QD films, once mechanically coupled, exhibit improved phase stability, and we link this to distributing strain across the film. Operando measurements of the temperature of the LEDs indicate that KI-exchanged QD films exhibit increased thermal transport compared to controls that rely on organic ligands. The LEDs exhibit a maximum EQE of 23 % with an electroluminescence emission centered at 640 nm (FWHM: ≈31 nm). These red LEDs provide an operating half-lifetime of 10 h (luminance of 200 cd m-2 ) and an operating stability that is 6× higher than that of control devices.

Chloride Insertion-Immobilization Enables Bright, Narrowband, and Stable Blue-Emitting Perovskite Diodes.

Metal halide perovskites show promise for light-emitting diodes (LEDs) owing to their facile manufacture and excellent optoelectronic performance, including high color purity and spectral stability, especially in the green region. However, for blue perovskite LEDs, the emission spectrum line width is broadened to over 25 nm by the coexistence of multiple reduced-dimensional perovskite domains, and the spectral stability is poor, with an undesirable shift (over 7 nm) toward longer wavelengths under operating conditions, degradation that occurs due to phase separation when mixed halides are employed. Here we demonstrate chloride insertion-immobilization, a strategy that enables blue perovskite LEDs, the first to exhibit narrowband (line width of 18 nm) and spectrally stable (no wavelength shift) performance. We prepare bromide-based perovskites and then employ organic chlorides for dynamic treatment, inserting and in situ immobilizing chlorides to blue-shift and stabilize the emission. We achieve sky-blue LEDs with a record luminance over 5100 cd/m2 at 489 nm, and an operating half-life of 51 min at 1500 cd/m2. By device structure optimization, we further realize an improved EQE of 5.2% at 479 nm and an operating half-life of 90 min at 100 cd/m2.

Plasmonic Titanium Nitride Facilitates Indium Oxide CO2 Photocatalysis.

Nanoscale titanium nitride TiN is a metallic material that can effectively harvest sunlight over a broad spectral range and produce high local temperatures via the photothermal effect. Nanoscale indium oxide-hydroxide, In2 O3- x (OH)y , is a semiconducting material capable of photocatalyzing the hydrogenation of gaseous CO2 ; however, its wide electronic bandgap limits its absorption of photons to the ultraviolet region of the solar spectrum. Herein, the benefits of both nanomaterials in a ternary heterostructure: TiN@TiO2 @In2 O3- x (OH)y are combined. This heterostructured material synergistically couples the metallic TiN and semiconducting In2 O3- x (OH)y phases via an interfacial semiconducting TiO2 layer, allowing it to drive the light-assisted reverse water gas shift reaction at a conversion rate greatly surpassing that of its individual components or any binary combinations thereof.

Optical design of connecting electrodes for tandem organic light-emitting diodes.

Connecting electrodes play a crucial role to assist charge injection into the adjacent electroluminescent units in tandem organic light-emitting diodes (OLEDs). In this study, we demonstrate that Mg:Ag alloy is an effective connecting electrode for bottom- and top-emitting tandem OLEDs. Optical cavity design and simulation are also conducted to predict the luminance of tandem OLEDs. It is found that the theoretical luminance of tandem OLEDs is close to but not higher than twofold enhancement over the luminance of a single OLED optimized to the first resonance mode, which is theoretically higher than high-order resonance modes. It is also found that the optical properties of Mg:Ag connecting electrodes, while having relatively small influence on weak microcavity bottom-emitting tandem OLEDs, have large influence on strong microcavity top-emitting tandem OLEDs.

Low serum 25-hydroxyvitamin D levels are associated with liver injury markers in the US adult population.

OBJECTIVE: To examine the associations between serum 25-hydroxyvitamin D (25(OH)D) levels and serum liver enzymes in a representative sample of US adults. DESIGN: The cross-sectional study sample consisted of 24 229 adults with data on serum 25(OH)D levels and serum alanine aminotransferase (ALT), aspartate aminotransferase (AST), alkaline phosphatase (ALP) and gamma-glutamyl transaminase (GGT) concentrations, in addition to data on other potential confounders. Multivariate logistic regression and linear regression were applied to assess the associations between serum 25(OH)D levels and ALT, AST, ALP and GGT concentrations. SETTING: The National Health and Nutrition Examination Survey, 2001-2006. PARTICIPANTS: The cross-sectional study sample consisted of 24 229 adults. RESULTS: We found a significant association between low serum 25(OH)D levels (<30 nmol/l) and ALP levels in all participants (OR 2·67; 95 % CI 1·98, 3·59; P < 0·001), a confirmed healthy population (OR 3·02; 95 % CI 2·25, 4·07; P < 0·001) and individuals with viral hepatitis (OR 2·87; 95 % CI 1·52, 5·44; P = 0·006) compared with those who had normal 25(OH)D levels (>50 nmol/l). Moreover, in both the logistic regression and linear regression, the associations between 25(OH)D levels and ALP levels were stronger in the subgroups with obesity. No association was present between ALT, AST or GGT levels and serum 25(OH)D levels in this population. CONCLUSIONS: The results of the present study provide epidemiological evidence that vitamin D deficiency is associated with liver ALP levels in humans. This finding suggests a potential adverse effect of low 25(OH)D levels on human liver function. However, the underlying mechanisms still need further investigation.

De Novo Design of Excited-State Intramolecular Proton Transfer Emitters via a Thermally Activated Delayed Fluorescence Channel.

Developing excited-state intramolecular proton transfer (ESIPT) emitters with high photoluminescence quantum yields (ΦPLs) and long fluorescence lifetimes in solid state remains a formidable challenge. In this study, we integrated the molecular design tactics of thermally activated delayed fluorescence (TADF) into ESIPT molecules with the goals of improving their ΦPLs and increasing their fluorescence lifetimes. Two proof-of-concept molecules, PXZPDO and DMACPDO, were developed by adopting symmetric D-π-A-π-D molecular architectures (where D and A represent donors and acceptors, respectively) featuring electron-donating phenoxazine or a 9,9-dimethyl-9,10-dihydroacridine moiety, an ESIPT core ß-diketone, and phenylene π-bridges. Both molecules exhibited sole enol-type forms stabilized by intramolecular hydrogen bonds and exhibited a unique and dynamic ESIPT character that was verified by transient absorption analyses. Endowed with distinct TADF features, PXZPDO and DMACPDO showed high ΦPLs of 68% and 86% in the film state, coupled with notable delayed fluorescence lifetimes of 1.33 and 1.94 µs, respectively. Employing these ESIPT emitters successfully achieved maximum external quantum efficiencies (ηexts) of 18.8% and 23.9% for yellow and green organic light-emitting diodes (OLEDs), respectively, which represent the state-of-the-art device performances for ESIPT emitters. This study not only opens a new avenue for designing efficient ESIPT emitters with high ΦPLs and long fluorescence lifetimes in solid state but also unlocks the huge potential of ESIPT emitters in realizing high-efficiency OLEDs.

ZnFe2 O4 Leaves Grown on TiO2 Trees Enhance Photoelectrochemical Water Splitting.

TiO2 has excellent electrochemical properties but limited solar photocatalytic performance in light of its large bandgap. One important class of visible-wavelength sensitizers of TiO2 is based on ZnFe2 O4 , which has shown fully a doubling in performance relative to pure TiO2 . Prior efforts on this important front have relied on presynthesized nanoparticles of ZnFe2 O4 adsorbed on a TiO2 support; however, these have not yet achieved the full potential of this system since they do not provide a consistently maximized area of the charge-separating heterointerface per volume of sensitizing absorber. A novel atomic layer deposition (ALD)-enhanced synthesis of sensitizing ZnFe2 O4 leaves grown on the trunks of TiO2 trees is reported. These new materials exhibit fully a threefold enhancement in photoelectrochemical performance in water splitting compared to pristine TiO2 under visible illumination. The new materials synthesis strategy relies first on the selective growth of FeOOH nanosheets, 2D structures that shoot off from the sides of the TiO2 trees; these templates are then converted to ZnFe2 O4 with the aid of a novel ALD step, a strategy that preserves morphology while adding the Zn cation to achieve enhanced optical absorption and optimize the heterointerface band alignment.

Lymphocyte to monocyte ratio is associated with response to first-line platinum-based chemotherapy and prognosis of early-stage non-small cell lung cancer patients.

Lymphocyte to monocyte ratio (LMR) has shown prognostic value in different types of cancer. This study assessed the prognostic performance of LMR in early-stage non-small cell lung cancer (NSCLC) patients and investigated the influence of LMR on the treatment response in patients receiving first-line platinum-based chemotherapy. Four hundred eighty-eight NSCLC patients and 500 healthy donors were enrolled in this study. The cutoff value for LMR was chosen by receiver operating characteristic curve analysis. The prognostic significance of markers was assessed by univariate and multivariate Cox regression models. The median overall survival was 43 months, and the median progression-free survival was 38 months. LMR was associated with disease status and the treatment response of first-line platinum-based chemotherapy. Multivariate analysis showed that LMR was an independent prognostic factor for both overall survival (hazard ratio = 1.53, 95 % confidence interval = 1.09-2.14, P = 0.015) and progression-free survival (hazard ratio = 1.20, 95 % confidence interval = 1.02-1.67, P = 0.028). Furthermore, integration of LMR into a prognostic model including TNM stage, tumor status, chemotherapy, and histological type generated a nomogram, which predicted accurately overall survival for NSCLC patients. Decreased LMR may be a potential biomarker of disease status, worse response to first-line platinum-based chemotherapy, and worse survival for NSCLC patients. A prospective study is warranted for further validation of our findings.