Diversity of Arbuscular Mycorrhizal fungi under different agroforestry practices in the drylands of Southern Ethiopia.

The conversion of an agroforestry based agricultural system to a monocropping farming system influences the distribution and composition of arbuscular mycorrhizal fungi (AMF). The aim of this paper was to analyze AMF species diversity, spore density, and root colonization across different agroforestry practices (AFP) in southern Ethiopia. Soil and root samples were collected from homegarden, cropland, woodlot, and trees on soil and water conservation-based AFP. AMF spores were extracted from the soil and species diversity was evaluated using morphological analysis and root colonization from root samples. The AMF spore density, root colonization and composition were significantly different among the AFP (P < 0.05). In this study, 43 AMF morphotypes belonging to eleven genera were found, dominated by Acaulospora (32.56%), followed by Claroideoglomus (18.60%). Home gardens had the highest spore density (7641.5 spore100 g- 1 dry soil) and the lowest was recorded in croplands (683.6 spore100 g- 1 dry soil). Woodlot had the highest root colonization (54.75%), followed by homegarden (48.25%). The highest isolation frequency (63.63%) was recorded for Acaulospora scrobiculata. The distribution of AMF species and diversity were significantly related to soil total nitrogen and organic carbon. The homegarden and woodlot AFP were suitable for soil AMF reserve and conservation.

Leonardite iron humate and synthetic iron chelate mixtures in Glycine max nutrition.

BACKGROUND: The aim of this work was to study the possible synergic effect between mixtures with iron leonardite humate (L/Fe3+ ) and synthetic chelates iron (Ch/Fe3+ : o,oEDDHA /Fe3+ or HBED/Fe3+ ), and to reevaluate the classical chelate shuttle-effect model. Different molar ratios of L/Fe3+ :Ch/Fe3+ , different doses, and different sampling times were used in hydroponic and soil experiments using soybean (Glycine max) as a model Strategy I crop in calcareous conditions. Ligand competition between the humate and chelating agents was also examined. RESULTS: Iron humate participates in the chelate shuttle mechanism, providing available Fe to the chelating agent and then to the plants, showing a slight synergic effect. After a few days, the contribution of the chelates to the Fe nutrition decreases substantially, but the contribution of the humates is maintained. CONCLUSIONS: The most efficient ratio was two parts of iron humates and one part of iron chelate. In particular, HBED/Fe3+ was the most suitable iron chelate because its lasting effect fits the iron humate long-term effect better. The soluble iron in soil increased and the shoot-to-root iron translocation improved due to a synergic effect by a shuttle effect exerted by iron chelate in the mixture. © 2021 Society of Chemical Industry.

Implications of the Mn:ligand ratio for Mn uptake by Glycine max L. plants fertilized with heptagluconate and gluconate complexes.

BACKGROUND: The environmental risk of the application of synthetic chelates has furthered the implementation of biodegradable complexes to correct manganese (Mn)-deficient plants. This study used the biodegradable ligands of heptagluconate (G7) and gluconate (G6) to test the influence of the Mn2+ :ligand ratio on their fertilizers' capacity to provide Mn to plants. The efficacy of these complexes to correct Mn-deficient soybean was evaluated in hydroponics and calcareous soil conditions and compared with the synthetic chelate EDTA (ethylenediaminetetraacetic acid). RESULTS: This study demonstrated that G7 was a biodegradable alternative to EDTA for supplying Mn, maintaining an adequate nutritional balance compared with G6, which reduced iron (Fe) uptake by the plants. The efficacy of the Mn complexes depended on both the ligand and the Mn:ligand ratio, with the 1:1 and 1:2 molar ratios of Mn2+ :G7 being the most effective complexes in the short term on the basis of their chemical structure and stability. CONCLUSION: The Mn2+ :G7 (1:1 and 1:2) complexes were found to be effective Mn sources for plant nutrition due to their chemical structures providing adequate stability in alkaline solution and their fast-action effect. © 2021 Society of Chemical Industry.

Effect of Fe:ligand ratios on hydroponic conditions and calcareous soil in Solanum lycopersicum L. and Glycine max L. fertilized with heptagluconate and gluconate.

BACKGROUND: The environmental risk from the application of synthetic chelates has led to the use of biodegradable complexes to correct Fe deficiency in plants. In this article, the Fe oxidation state, the Fe:ligand ratio, and the molecular weight distribution for heptagluconate (G7) and gluconate (G6) are considered as key factors for the efficacy of complexes as fertilizers. Complexes with different Fe:ligand ratios were prepared and analyzed by gel filtration chromatography (GFC). The ability of Fe:ligand ratios to provide Fe to tomato in hydroponics and soybean in calcareous soil was tested and compared with synthetic chelates (Fe3+ :HBED and Fe3+ :EDTA). RESULTS: G7 presented greater capacity to complex both Fe(II) and Fe(III) than G6, but the Fe(II) complexes exhibited poor stability at pH 9 and oxidation in solution. Gel filtration chromatography demonstrated the polynuclear nature of the Fe3+ :G7 at various ratios. The effectiveness of the Fe fertilizers depend on the Fe3+ :ligand ratio and the ligand type, the Fe3+ :G7 (1:1 and 1:2) being the most effective. Fe3+ :G7 (1:1) also presented a better response for the uptake of other micronutrients. CONCLUSION: Fe3+ :G7 molar ratios have been shown to be critical for plant Fe uptake under hydroponic conditions and with calcareous soil. Thus, the Fe3+ :G7 at equimolar ratio and 1:2 molar ratio can be an environmentally friendly alternative to less degradable synthetic chelates to correct Fe chlorosis in strategy I plants. © 2019 Society of Chemical Industry.

Timing for a sustainable fertilisation of Glycine max by using HBED/Fe3+ and EDDHA/Fe3+ chelates.

BACKGROUND: Efficient use of Fe chelates is crucial to avoid environmental risks and reduce economic losses. HBED/Fe3+ has been recently approved by the European Union for soil fertilisation, but studies delving into the best timing for its application are necessary. In this work, a batch incubation experiment and two biological experiments were developed to determine the optimal physiological stage for a sustainable application of HBED/Fe3+ in soil fertilisation compared with EDDHA/Fe3+ fertilisers using 57 Fe. RESULTS: HBED/Fe3+ demonstrated a high durability in soils and soil materials, maintaining more than 80% of Fe chelated after 70 days, and its application at an early physiological stage resulted in a high Fe accumulation in soybean and soil after 36 days. In contrast, the stability of EDDHA/Fe3+ decreased because of the retention of its lowest stable isomers. The best timing for chelates application was confirmed in a 52 day experiment. The application of HBED/Fe3+ at the early stage increased the Fe translocation to fruits; while o,o-EDDHA/Fe3+ accumulated more Fe in fruits when added at the fructification stage. CONCLUSION: The high HBED/Fe3+ stability in calcareous soil requires a differentiate application timing, and its addition at early physiological stages leads into the most efficient fertilisation. © 2016 Society of Chemical Industry.

Novel chelating agents for iron, manganese, zinc, and copper mixed fertilisation in high pH soil-less cultures.

BACKGROUND: Studies about simultaneous fertilisation with several micronutrients have increased in recent years, as Fe, Mn and Zn deficiencies may appear in the same culture conditions. In fertigation, the replacement of sulfates by synthetic chelates is essential in areas with high pH irrigation water and substrates. Ethylenediamine-N-(2-hydroxyphenylacetic acid)-N'-(4-hydroxyphenylacetic acid) (o,p-EDDHA) and ethylenediamine disuccinic acid (EDDS) are novel chelating agents whose efficacy in simultaneous fertilisation of Zn, Mn and Cu is unknown. This work evaluates the effectiveness of both ligands compared to traditional ligands (EDTA, HEEDTA and DTPA) applied as micronutrient chelate mixtures to soybean and navy bean plants grown in soil-less cultures at high pH by analysing the SPAD and micronutrient nutritional status, including the Composition Nutritional Diagnosis (CND) analysis tool. RESULTS: The application of micronutrients using o,p-EDDHA was more effective in providing Mn and Zn than traditional ligands or sulfates. The application using EDDS increased the Zn nutrition. The results are well correlated with the chemical stability of the formulations. CONCLUSION: The combined application of Mn and Zn as o,p-EDDHA chelates can represent a more effective source than traditional chelates in micronutrient fertiliser mixtures in soil-less cultures at a high pH.

A Critical Review of Methodologies for Evaluating Iron Fertilizers Based on Iron Reduction and Uptake by Strategy I Plants.

Under iron (Fe)-limited conditions, plants have developed strategies for acquiring this essential micronutrient. Several Fe sources have been studied as potential fertilizers, with Fe synthetic chelates being the most used to prevent and correct Fe chlorosis in crops. The determination of the activity of the Fe chelate reductase (FCR) enzyme has long been described in the literature to understand the efficiency of Strategy I plants in acquiring Fe from fertilizers under deficient conditions. Other experiments have focused on the translocation of Fe to the plant to define the effectiveness of Fe fertilizers. Yet, both assays are relevant in knowing the capacity of a novel Fe source and other compounds alleviating Fe chlorosis in Strategy I plants. This work reviews the methodologies that are used in FCR assays to evaluate novel Fe fertilizers, including the factors modulating the results obtained for FCR assay activity, such as the Fe substrate, the Fe level during the growing period and during the FCR assay, the pH, the choice of an in vivo or in vitro method, and the plant species. A discussion of the benefits of the concurrence of FCR and Fe uptake assays is then presented alongside a proposed methodology for assessing the effectiveness of Fe fertilizers, emphasizing the importance of understanding chemical and physiological plant interactions. This methodology unifies key factors that modify FCR activity and combines these with the use of the 57Fe tracer to enhance our comprehension of the efficacy of Fe-based fertilizers' effectiveness in alleviating Fe chlorosis. This comprehensive approach not only contributes to the fundamental understanding of Fe-deficient Strategy I plants but also establishes a robust method for determining the efficiency of novel sources for correcting Fe deficiency in plants.

Evaluation of Siderophores Generated by Pseudomonas Bacteria and Their Possible Application as Fe Biofertilizers.

The application of synthetic iron chelates to overcome iron deficiency in crops is leading to a high impact on the environment, making it necessary to find more friendly fertilizers. A promising alternative is the application of biodegradable iron chelates, such as those based on siderophores. In the present work, seven bacterial strains of the genus Pseudomonas were selected for their ability to secrete pyoverdine, a siderophore with a high affinity for iron, which could be used as a biofertilizer. The concentration of siderophores secreted by each bacterium expressed as desferrioxamine B equivalents, and the pyoverdine concentration was determined. Their potential as Fe biofertilizers was determined based on their capacity to complex Fe, determining the maximum iron complexation capacity at alkaline pH and selecting the RMC4 strain. The biostimulant capacity of the RMC4 strain was evaluated through the secretion of organic acids such as the hormone Indol-3-acetic acid or glutamic acid, among others, in a kinetic assay. Finally, the genome of RMC4 was determined, and the strain was identified as Pseudomonas monsensis. The annotated genome was screened for genes and gene clusters implicated in biofertilization and plant growth promotion. Besides iron mobilization, genes related to phosphorus solubilization, production of phytohormones and biological control, among others, were observed, indicating the suitability of RMC4 as an inoculant. In conclusion, RMC4 and its siderophores are promising sources for Fe biofertilization in agriculture.

Biological activity of Fe(III) aquo-complexes towards ferric chelate reductase (FCR).

In this study we have obtained experimental evidence that confirms the high activity of aquo complexes III and IV towards the enzyme FCR, responsible for the reduction of Fe(III) to Fe(II) in the process of iron acquisition by plants. The in vivo FCR assays in roots of stressed cucumber plants have shown a higher efficiency of the family of complexes III and a striking structure-activity relationship with the nature of the substituent placed in a phenyl group far away from the metal center. The results obtained in this work demonstrate that all the aquo compounds tested interact efficiently with the enzyme FCR and hence constitute a new concept of iron chelates that could be of great use in agronomy.

Comparative study of the chemical composition and antifungal activity of commercial brown seaweed extracts.

Introduction: A sustainable agriculture and the great increase in consumers of organic products in the last years make the use of natural products one of the main challenges of modern agriculture. This is the reason that the use of products based on seaweed extracts has increased exponentially, specifically brown seaweeds, including Ascophyllum nodosum and Ecklonia maxima. Methods: In this study, the chemical composition of 20 commercial seaweed extract products used as biostimulants and their antifungal activity against two common postharvest pathogens (Botrytis cinerea and Penicillium digitatum) from fruits were evaluated. Data were processed using chemometric techniques based on linear and non-linear models. Results and discussion: The results showed that the algae species and the percentage of seaweed had a significant effect on the final composition of the products. In addition, great disparity was observed between formulations with similar labeling and antifungal effect of most of the analyzed products against some of the tested pathogens. These findings indicate the need for further research.

Influence of irradiation time and solution concentration on the photochemical degradation of EDDHA/Fe3+: effect of its photodecomposition products on soybean growth.

BACKGROUND: Ethylenediamine-N, N'-bis(2-hydroxyphenylacetic acid (EDDHA) is one of the most efficient iron-chelating agents employed to relieve iron chlorosis in plants. It has been well known for decades that this compound is photosensitive, but in spite of this fact its degradation pathways are virtually unknown. The aim of this work was to evaluate how the length of sunlight exposure and the concentration of irradiated EDDHA/Fe(3+) solutions influence the photostability of the chelate at constant pH. Moreover, the possible toxic effect of the chelate photodegradation products, elsewhere proposed, on soybean growth has been tested. RESULTS: The photodecomposition of the chelate increased as the time of sunlight exposure increased, and resulted in a partial decomposition of the organic ligand. Moreover, EDDHA/Fe(3+) photodecomposition was highly correlated with the concentration of solution exposed. Plants did not present differences in recovery from chlorosis among treatments with and without decomposition products. CONCLUSIONS: EDDHA/Fe(3+) undergoes photodegradation, like other aminopolycarboxylic acids, being more degraded as solution concentration decreases and exposure time increases. The photodecomposition products salicylic acid, salicylaldehide and Salicylaldehyde ethylenediamine diimine tested did not have negative effects on soybean growth, at least in the short-term hydroponic experimental design tested.

Use of the stable isotope (57) Fe to track the efficacy of the foliar application of lignosulfonate/Fe(3+) complexes to correct Fe deficiencies in cucumber plants.

BACKGROUND: During the last decade, environmental concerns regarding the use of recalcitrant synthetic chelates to overcome iron chlorosis has increased and new ligands such as lignosulfonates (LS) have been evaluated. However, the efficacy of these products is variable. In this work a hardwood (eucalyptus) and softwood (spruce) LS were compared to try to relate their physico-chemical characteristics and their efficacy. Also two more products derived from the eucalyptus lignosulfonate were tested. RESULTS: All the LS tested presented a good ability to complex Fe, but only the spruce LS was capable to maintain significant amounts of soluble Fe above pH 8. According to the FTIR data, structural changes related to the Fe source (Fe(2+) or Fe(3+) ) used to form the complex occurred in the LS molecule and might influence their efficacy. Cucumber (Cucumis sativus L. cv Ashley) chlorotic plants were used to test lignosulfonate efficacy when applied through foliar sprays in comparison with FeSO(4) and EDTA/(57) Fe(3+) . The (57) Fe content of plants sprayed with LS was very low in respect to the EDTA treatment, but this was not reflected in the biomass and re-greening rates. Eucalyptus LS modifications improve its efficacy for iron chlorosis recovery to levels similar to those found for the spruce LS. Two applications of the LS are recommended. CONCLUSIONS: Lignosulfonates did not require surfactants for their application; they did not burn the leaves, and had a stimulating effect on the vegetative growth of the plants. So these by-products could be a good alternative when applied through foliar sprays for cucumber plants.

Fast Determination of a Novel Iron Chelate Prototype Used as a Fertilizer by Liquid Chromatography Coupled to a Diode Array Detector.

The environmental risk of the application of synthetic chelates has favored the implementation of new biodegradable ligands to correct Fe-deficient plants. This study developed and validated an analytical method for determination of a new prototype iron chelate─Fe(III)-benzeneacetate, 2-hydroxy-α-[(2-hydroxyethyl)amino]─(BHH/Fe3+) based on liquid chromatography with diode array detection, as a potential sustainable alternative. Chromatographic analysis was performed on a LiChrospher RP-18 in reverse-phase mode, with a mobile phase consisting of a mixture of acetonitrile (solvent A) and sodium borate buffer 0.20 mM at pH = 8 (solvent B) at a flow rate of 1.0 mL/min in isocratic elution mode. This method was fully validated and found to be linear from the limit of quantification (LOQ) to 50 mg/L and precise (standard deviation below 5%). The proposed method was demonstrated to be selective, precise, and robust. The developed methodology indicated that it is suitable for the quantification of iron chelate BHH/Fe3+.

Iron supply to soybean plants through the foliar application of IDHA/Fe3+: effect of plant nutritional status and adjuvants.

BACKGROUND: Synthetic Fe chelates are commonly used to overcome Fe deficiencies in crops, but most of them are scarcely biodegradable. Iminodisuccinic acid (IDHA) is a biodegradable chelating agent that is currently being evaluated as an alternative to EDTA. In this work, the efficacy of the foliar application of IDHA/Fe(3+) to soybean chlorotic plants under controlled conditions was studied, testing the influence of the adjuvant used and of the plant nutritional status. RESULTS: When IDHA/Fe(3+) was applied to soybean plants with severe Fe chlorosis and the foliar sprays were the sole source of Fe, this chelate behaved similarly to the EDTA/Fe(3+) and the recovery of the plants was slight in both cases. The same chelates were tested when foliar sprays were an additional source of Fe for mildly chlorotic plants, which were also being supplied with low concentrations of Fe applied to the nutrient solution. Then, plant recovery was appreciable in all cases, and the IDHA/Fe(3+) was as effective as EDTA/Fe(3+). Among the adjuvants studied, a urea-based product was the only one that did not damage the leaf surface and that could improve the efficiency of IDHA/Fe(3+) up tp the level of EDTA/Fe(3+). CONCLUSIONS: Thus, it was concluded the foliar application of IDHA/Fe(3+) can be an environmentally friendly alternative to the non-biodegradable chelate EDTA/Fe(3+) when the appropriate adjuvant is used.

Assessing metal-lignosulfonates as fertilizers using gel filtration chromatography and high-performance size exclusion chromatography.

Lignosulfonates (LSs) are by-products from the paper industry used as biodegradable fertilizers. However, metal-LS ability to provide micronutrients to crops is related to the stability of the complex and the amount of metal complexed. This work evaluated these parameters using ultraviolet-visible (UV-Vis), Fourier-transform infrared (FTIR), and 13C-nuclear magnetic resonance (NMR), along with gel filtration chromatography (GFC) and high-performance size exclusion chromatography (HPSEC), for different spruce, eucalyptus, and pine LSs. GFC and HPSEC pointed out that the amount and type of complexed metal in the LS depends on the molecular weight, pH, and sulphite pulping processes. Both techniques indicated that the low molecular weight LS enriched with phenolic groups has the highest Fe(III) complexing capacity. Also, Fe(III)/LS showed the formation of high molecular weight compounds, whereas Zn(II)/LS and Mn(II)/LS complexes did not form aggregates. Metal-LS fractionation provided considerable information to identify LSs with potential fertilizer capacity and to assess the effectiveness of their complexes.

[S,S]-EDDS/Fe: A new chelate for the environmentally sustainable correction of iron chlorosis in calcareous soil.

Iron deficiency in crops is usually prevented and cured by the application of synthetic Fe chelates such as EDTA/Fe and the o,o-EDDHA/Fe. However their persistence in soil calls for the implementation of new alternatives that present less of a risk to the environment. This study therefore evaluated the biodegradable chelating agent [S,S]-EDDS as a new source for Fe fertilisation in calcareous soils in relation to its chemical reactivity. The suitability of [S,S]-EDDS/Fe as an Fe fertiliser in a calcareous soil was investigated and compared to the traditional synthetic chelates EDTA/Fe and o,o-EDDHA/Fe. Plant experiments with soybean (Glycine max), 57Fe isotopic labelling, and batch incubations were conducted in a calcareous soil. The Fe concentration of plants treated with [S,S]-EDDS/Fe was similar to those treated with EDTA/Fe. A similar Fe concentration to the o,o-EDDHA/Fe treatment was achieved using a double dose of [S,S]-EDDS/Fe. Despite the degradation of [S,S]-EDDS limiting the durability of [S,S]-EDDS/Fe in soil, the Fe bound to the degradation products may be a determining factor in improving Fe uptake and translocation to leaves in plants treated with [S,S]-EDDS/Fe compared to other Fe sources. Speciation studies by modelling and batch experiments also supported the lower reactivity of [S,S]-EDDS/Fe with calcium compared to that of EDTA/Fe, possibly contributing to the permanence of [S,S]-EDDS/Fe in the calcareous soil. This study demonstrated for the first time, that [S,S]-EDDS may be an environmentally sustainable alternative to traditional synthetic chelating agents such as EDTA or o,o-EDDHA for curing Fe chlorosis in susceptible plants in calcareous soil.

Evaluation of the Efficacy of Two New Biotechnological-Based Freeze-Dried Fertilizers for Sustainable Fe Deficiency Correction of Soybean Plants Grown in Calcareous Soils.

Currently, fertilization with synthetic chelates is the most effective agricultural practice to prevent iron (Fe) deficiencies in crops, especially in calcareous soils. Because these compounds are not biodegradable, they are persistent in the environment, and so, there is the risk of metal leaching from the soils. Thus, new, more environment-friendly efficient solutions are needed to solve iron-deficiency-induced chlorosis (IDIC) in crops grown in calcareous soils. Therefore, the central aim of this work was to prepare new freeze-dried Fe products, using a biotechnological-based process, from two siderophores bacterial (Azotobacter vinelandii and Bacillus subtilis) cultures (which previously evidenced high Fe complexation ability at pH 9) and test their capacity for amending IDIC of soybean grown in calcareous soils. Results have shown that A. vinelandii iron fertilizer was more stable and interacted less with calcareous soils and its components than B. subtilis one. This behavior was noticeable in pot experiments where chlorotic soybean plants were treated with both fertilizer products. Plants treated with A. vinelandii fertilizer responded more significantly than those treated with B. subtilis one, when evaluated by their growth (20% more dry mass than negative control) and chlorophyll development (30% higher chlorophyll index than negative control) and in most parameters similar to the positive control, ethylenediamine-di(o-hydroxyphenylacetic acid). On average, Fe content was also higher in A. vinelandii-treated plants than on B. subtilis-treated ones. Results suggest that this new siderophore-based formulation product, prepared from A. vinelandii culture, can be regarded as a possible viable alternative for replacing the current nongreen Fe-chelating fertilizers and may envisage a sustainable and environment-friendly mending IDIC of soybean plants grown in calcareous soils.

Eco-Friendly Iron-Humic Nanofertilizers Synthesis for the Prevention of Iron Chlorosis in Soybean (Glycine max) Grown in Calcareous Soil.

Iron deficiency is a frequent problem for many crops, particularly in calcareous soils and iron humates are commonly applied in the Mediterranean basin in spite of their lesser efficiency than iron synthetic chelates. Development and application of new fertilizers using nanotechnology are one of the potentially effective options of enhancing the iron humates, according to the sustainable agriculture. Particle size, pH, and kinetics constrain the iron humate efficiency. Thus, it is relevant to understand the iron humate mechanism in the plant-soil system linking their particle size, characterization and iron distribution in plant and soil using 57Fe as a tracer tool. Three hybrid nanomaterials (F, S, and M) were synthesized as iron-humic nanofertilizers (57Fe-NFs) from leonardite potassium humate and 57Fe used in the form of 57Fe(NO3)3 or 57Fe2(SO4)3. They were characterized using Mössbauer spectroscopy, X-ray diffraction (XRD), extended X-ray absorption fine structure spectroscopy (EXAFS), transmission electron microscopy (TEM) and tested for iron availability in a calcareous soil pot experiment carried out under growth chamber conditions. Three doses (35, 75, and 150 µmol pot-1) of each iron-humic material were applied to soybean iron deficient plants and their iron nutrition contributions were compared to 57FeEDDHA and leonardite potassium humate as control treatments. Ferrihydrite was detected as the main structure of all three 57Fe-NFs and the plants tested with iron-humic compounds exhibited continuous long-term statistically reproducible iron uptake and showed high shoot fresh weight. Moreover, the 57Fe from the humic nanofertilizers remained available in soil and was detected in soybean pods. The Fe-NFs offers a natural, low cost and environmental option to the traditional iron fertilization in calcareous soils.

Calcareous soil interactions of the iron(III) chelates of DPH and Azotochelin and its application on amending iron chlorosis in soybean (Glycine max).

In order to find new greener solutions for iron (Fe) induced chlorosis, two new chelating agents, N,N-dihydroxy-N,N'-diisopropylhexanediamide (DPH) and Azotochelin (AZO), were assessed for its effectiveness in mending induced chlorosis in soybean (Glycine max). DPH-Fe and AZO-Fe complexes were firstly tested for their soil interactions and capability to maintain Fe in a bioavailable form. Secondly, 57Fe-chelates of DPH and AZO were applied to the soil in a pot experiment with chlorotic soybean plants. Their growth, SPAD chlorophyll index, and the Fe concentration in plant tissues and the remaining soil were evaluated. An isotope deconvolution analysis by using the concentration of the Fe isotopes was used to distinguish the Fe coming from soil and from the 57Fe labelled fertilizer treatments. AZO and DPH have shown different interactions with soil and its components, with AZO showing less interaction than DPH. The application of AZO and DPH resulted in SPAD increase and Fe content. However, it was found that the Fe in plants had not come from the fertilizer application, but instead from natural sources. This is likely due to dissolution phenomena aided by the chelates added. Overall, AZO and DPH have shown good results in amending Fe induced chlorosis in calcareous soils and for this reason should be regarded as good green-candidates for Fe plant nutrition in calcareous soils.

Potential use of biodegradable chelate N-(1,2-dicarboxyethyl)-D,L-aspartic acid/Fe3+ as an Fe fertilizer.

In the past several years, concern about the environmental fate of recalcitrant synthetic ligands (e.g., EDTA) has increased. The used of new biodegradable chelating agents such as imidodisuccinic acid (IDHA) has been proposed as an alternative. However, its application as an iron ligand to correct iron chlorosis in agriculture has not yet been studied. Then the objective of this work is to determine the fertilizer capacity of IDHA/Fe3+ using interaction assays with soils and soil materials and evaluating Fe nutrition of efficient and susceptible plants. Interaction of IDHA/Fe3+ with soil materials produces a reduction of the amount of soluble Fe. This is in good agreement with studies on the stability of the IDHA/Fe3+ chelate. In general, plant response to IDHA/Fe3+ in hydroponics is acceptable and better than that to EDTA/Fe3+. This good behavior seems to be related to the lower coordination of the iron in IDHA/Fe3+ with respect to EDTA/Fe3+.