Inverted perovskite solar cells using dimethylacridine-based dopants.

Doping of perovskite semiconductors1 and passivation of their grain boundaries2 remain challenging but essential for advancing high-efficiency perovskite solar cells. Particularly, it is crucial to build perovskite/indium tin oxide (ITO) Schottky contact based inverted devices without predepositing a layer of hole-transport material3-5. Here we report a dimethylacridine-based molecular doping process used to construct a well-matched p-perovskite/ITO contact, along with all-round passivation of grain boundaries, achieving a certified power conversion efficiency (PCE) of 25.39%. The molecules are shown to be extruded from the precursor solution to the grain boundaries and the bottom of the film surface in the chlorobenzene-quenched crystallization process, which we call a molecule-extrusion process. The core coordination complex between the deprotonated phosphonic acid group of the molecule and lead polyiodide of perovskite is responsible for both mechanical absorption and electronic charge transfer, and leads to p-type doping of the perovskite film. We created an efficient device with a PCE of 25.86% (reverse scan) and that maintained 96.6% of initial PCE after 1,000 h of light soaking.

Diatom bloom trigger notable variations in microzooplanktonic ciliate composition, body-size spectrum and biotic-abiotic interaction in the Arctic Ocean.

How microzooplanktonic ciliate adaptative strategies differ across diatom bloom and non-diatom bloom areas in the Arctic Ocean remains poorly documented. To address this gap, two different situations were categorized in the Arctic Ocean at summer 2023: diatom bloom stations (DBS) (genus Thalassiosira, chain-like) and non-diatom bloom stations (nDBS). Total abundance of ciliate at 3 m and 25 m in DBS was 2.8 and 1.8 folds higher than in nDBS, respectively. Aloricate ciliates were singled out in both DBS and nDBS, whilst their average abundance and biomass of large size-fraction (>50 µm) in former were 4.5-5.6 folds higher than in latter. Regarding tintinnids, high abundance of Ptychocylis acuta (Bering Strait species) mainly occurred at DBS, coupled with distribution of co-occurring Pacific-origin species Salpingella sp.1, collectively suggested a strong intrusion of Pacific Inflow during summer 2023. Additionally, presence of high abundance of Acanthostomella norvegica and genus Parafavella in nDBS might indicate the trajectory of the Transpolar Drift. Alternatively, tintinnids can serve as credible bioindicators for either monitoring currents or evaluating microzooplankton Borealization. Average abundance of total ciliate within 15-135 µm body-size spectrum in DBS was higher than nDBS. Moreover, spearman's rank correlation between biotic and abiotic analysis revealed that temperature and dissolved oxygen at DBS determined tintinnid species richness and ciliate total abundance, respectively. The results clearly demonstrate that remarkable divergences in large size-fraction of ciliate abundance between DBS and nDBS validate their irreplaceable role in controlling phytoplankton outbreak and associated biological processes in polar seas.

Decoding the Mechanisms of Reversibility Loss in Rechargeable Zinc-Air Batteries.

Attaining high reversibility of the electrodes and electrolyte is essential for the longevity of secondary batteries. Rechargeable zinc-air batteries (RZABs), however, encounter drastic irreversible changes in the zinc anodes and air cathodes during cycling. To uncover the mechanisms of reversibility loss in RZABs, we investigate the evolution of the zinc anode, alkaline electrolyte, and air electrode through experiments and first-principles calculations. Morphology diagrams of zinc anodes under versatile operating conditions reveal that the nanosized mossy zinc dominates the later cycling stage. Such anodic change is induced by the increased zincate concentration due to hydrogen evolution, which is catalyzed by the mossy structure and results in oxide passivation on electrodes and eventually leads to low true Coulombic efficiencies and short life spans of batteries. Inspired by these findings, we finally present a novel overcharge-cycling protocol to compensate for the Coulombic efficiency loss caused by hydrogen evolution and significantly extend the battery life.

Homogenizing Zn Deposition in Hierarchical Nanoporous Cu for a High-Current, High Areal-Capacity Zn Flow Battery.

A Zn anode can offset the low energy density of a flow battery for a balanced approach toward electricity storage. Yet, when targeting inexpensive, long-duration storage, the battery demands a thick Zn deposit in a porous framework, whose heterogeneity triggers frequent dendrite formation and jeopardizes the stability of the battery. Here, Cu foam is transferred into a hierarchical nanoporous electrode to homogenize the deposition. It begins with alloying the foam with Zn to form Cu5 Zn8 , whose depth is controlled to retain the large pores for a hydraulic permeability ≈10-11  m2 . Dealloying follows to create nanoscale pores and abundant fine pits below 10 nm, where Zn can nucleate preferentially due to the Gibbs-Thomson effect, as supported by a density functional theory simulation. Morphological evolution monitored by in situ microscopy confirms uniform Zn deposition. The electrode delivers 200 h of stable cycles in a Zn-I2 flow battery at 60 mAh cm-2 and 60 mA cm-2 , performance that meets practical demands.

Revealing Structural Insights of Solid Electrolyte Interphase in High-Concentrated Non-Flammable Electrolyte for Li Metal Batteries by Cryo-TEM.

High-concentrated non-flammable electrolytes (HCNFE) in lithium metal batteries prevent thermal runaway accidents, but the microstructure of their solid electrolyte interphase (SEI) remains largely unexplored, due to the lack of direct imaging tools. Herein, cryo-HRTEM is applied to directly visualize the native state of SEI at the atomic scale. In HCNFE, SEI has a uniform laminated crystalline-amorphous structure that can prevent further reaction between the electrolyte and lithium. The inorganic SEI component, Li2 S2 O7 , is precisely identified by cryo-HRTEM. Density functional theory (DFT) calculations demonstrate that the final Li2 S2 O7 phase has suitable natural transmission channels for Li-ion diffusion and excellent ionic conductivity of 1.2 × 10-5 S cm-1 .

High-temperature effects for transition state calculations in solids.

Transition state calculation is a critical technique to understand and predict versatile dynamical phenomena in solids. However, the transition state results obtained at 0 K are often utilized for the prediction or interpretation of dynamical processes at high temperatures, and the error bars of such an approximation are largely unknown. In this benchmark study, all the major temperature effects, including lattice expansion, lattice vibration, electron excitation, and band-edge shift, are evaluated with first-principles calculations for defect diffusion in solids. With the inclusion of these temperature effects, the notable discrepancies between theoretical predictions at 0 K and the experimental diffusivities at high temperatures are dramatically reduced. In particular, we find that lattice expansion and lattice vibration are the dominant factors lowering the defect formation energies and hopping barriers at high temperatures, but the electron excitation exhibits minor effects. In sharp contrast to typical assumptions, the attempt frequency with lattice expansion and vibration varies significantly with materials: several THz for aluminum bulk but surprisingly over 500 THz for 4H-SiC. For defects in semiconductors, the band-edge shift is also significant at high temperatures and plays a vital role in defect diffusion. We expect that this study would help accurately predict the dynamical processes at high temperatures.

Structural feature in dynamical processes accelerated transition state calculations.

Minimum energy path (MEP) search is a vital but often very time-consuming method to predict the transition states of versatile dynamic processes in chemistry, physics, and materials science. In this study, we reveal that the largely displaced atoms in the MEP structures maintain transient chemical bond lengths resembling those of the same type in the stable initial and final states. Based on this discovery, we propose an adaptive semirigid body approximation (ASBA) to construct a physically reasonable initial guess for the MEP structures, which can be further optimized by the nudged elastic band method. Examination of several distinct dynamical processes in bulk, on crystal surface, and through two-dimensional system shows that our transition state calculations based on the ASBA results are robust and significantly faster than those based on the popular linear interpolation and image-dependent pair potential methods.

Bitumen-Derived Onion-Like Soft Carbon as High-Performance Potassium-Ion Battery Anode.

Potassium-ion batteries (PIBs) have been regarded as a competitive alternative for lithium-ion batteries, owing to the natural abundance, low cost, and similar rocking-chair working mechanism of potassium element. However, it is challenging to simultaneously prepare suitable potassium ion anode materials of low voltage plateau, high capacity, and long cycle life. In this work, onion-like soft carbon (OLSC) of high heteroatom content is prepared by using solvent-sensitive self-assembly properties of asphaltene molecules. The OLSC electrode exhibits a low voltage plateau because of a high degree of graphitization. Meanwhile, it possesses excellent cycling stability and rate capability due to the high stability of the onion-like structure and fast transport of potassium ions, the latter of which is caused by heteroatom-induced expanded interlayers as found by first-principle calculations. Compared with existing carbon materials, the OLSC synthesized in this study exhibits a high reversible capacity of 466 mAh g-1 at 20 mA g-1 , a reversible capacity of 222 mAh g-1 and capacity retention of 95% after 1600 cycles at 1 A g-1 . This work connects the nanostructure of carbon materials and electrochemical performance and provides new insights in improving carbon-based anodes for PIBs.

Monolayer, Bilayer, and Bulk BSi as Potential Anode Materials of Li-Ion Batteries.

Monolayer, bilayer, and bulk BSi are studied to explore their application potential as anode materials of Li-ion batteries. Structural stability and metallicity are obtained in each case. The Li storage capacities of monolayer and bilayer BSi are 1378 and 689 mAh g-1 , respectively, with average open circuit voltages of 1.30 and 0.47 V as well as Li diffusion barriers of 0.48 and 0.27 eV. Bulk BSi realizes a layered structure in the presence of a small amount of Li and its Li diffusion barrier of 0.48 eV is identical to that of graphite and lower than that of bulk Si (0.58 eV). The Li storage capacity of bulk BSi is found to be 689 mAh g-1 , i. e., much higher than that of graphite (372 mAh g-1 ). The volume expansion turns out to be 33 % and the chemical bonds remain intact at full lithiation, outperforming the 72 % volume expansion of bulk Si at the same capacity and thus pointing to excellent cyclability.

Atomistic Mechanism and Long-Term Stability of Using Chlorinated Graphdiyne Film to Reduce Lithium Dendrites in Rechargeable Lithium Metal Batteries.

The formation of lithium dendrites remains one of the biggest challenges of commercializing rechargeable lithium metal batteries. Here, we combine classical molecular dynamics simulations and first-principles calculations to study the possibility of utilizing modified graphdiyne film, which possesses intrinsic nanopores, as a stable "nanosieve" to reduce the lithium dendrites on anode. We find that through a mechanism resembling the hydraulic jump in fluid dynamics, graphdiyne film can enforce the concentration uniformity of lithium ions even under a highly non-uniform electric field and thus can induce a uniform nucleation of lithium metal. We further show that bare graphdiyne film can be gradually metalized by lithium metal, but the chlorination of graphdiyne significantly increases its resistance to the metalization and easily conducts the lithium ions. These properties together suggest that the chlorinated graphdiyne can potentially be used as a stable membrane to reduce the lithium dendrites in rechargeable lithium metal batteries.

Single copper sites dispersed on defective TiO2-x as a synergistic oxygen reduction reaction catalyst.

Catalysts containing isolated single atoms have attracted much interest due to their good catalytic behavior, bridging the gap between homogeneous and heterogeneous catalysts. Here, we report an efficient oxygen reduction reaction (ORR) catalyst that consists of atomically dispersed single copper sites confined by defective mixed-phased TiO2-x. This synergistic catalyst was produced by introducing Cu2+ to a metal organic framework (MOF) using the Mannich reaction, occurring between the carbonyl group in Cu(acac)2 and the amino group on the skeleton of the MOF. The embedding of single copper atoms was confirmed by atomic-resolution high-angle annular dark-field scanning transmission electron microscopy and x-ray absorption fine structure spectroscopy. Electronic structure modulation of the single copper sites coupling with oxygen vacancies was further established by electron paramagnetic resonance spectroscopy and first-principles calculations. Significantly enhanced ORR activity and stability were achieved on this special Cu single site. The promising application of this novel electrocatalyst was demonstrated in a prototype Zn-air battery. This strategy of the stabilization of single-atom active sites by optimization of the atomic and electronic structure on a mixed matrix support sheds light on the development of highly efficient electrocatalysts.

Shaping and Edge Engineering of Few-Layered Freestanding Graphene Sheets in a Transmission Electron Microscope.

Full exploitation of graphene's superior properties requires the ability to precisely control its morphology and edge structures. We present such a structure-tailoring approach via controlled atom removal from graphene edges. With the use of a graphitic-carbon-capped tungsten nanoelectrode as a noncontact "milling" tool in a transmission electron microscope, graphene edge atoms approached by the tool tip are locally evaporated, thus allowing a freestanding graphene sheet to be tailored with high precision and flexibility. A threshold for the tip voltage of 3.6 ± 0.4 V, independent of polarity, is found to be the determining factor that triggers the controlled etching process. The dominant mechanisms involve weakening of carbon-carbon bonds through the interband excitation induced by tunneling electrons, assisted with a resistive-heating effect enhanced by high electric field, as elaborated by first-principles calculations. In addition to the precise shape and size control, this tip-based method enables fabrication of graphene edges with specific chiralities, such as "armchair" or "zigzag" types. The as-obtained edges can be further "polished" to become entirely atomically smooth via edge evaporation/reconstruction induced by in situ TEM Joule annealing. We finally demonstrate the potential of this technique for practical uses through creating a graphene-based point electron source, whose field emission characteristics can effectively be tuned via modifying its geometry.

Ion Sieve Interface Assisted Zinc Anode with High Zinc Utilization and Ultralong Cycle Life for 61 Wh/kg Mild Aqueous Pouch Battery.

The cycling stability of a thin zinc anode under high zinc utilization has a critical impact on the overall energy density and practical lifetime of zinc ion batteries. In this study, an ion sieve protection layer (ZnSnF@Zn) was constructed in situ on the surface of a zinc anode by chemical replacement. The ion sieve facilitated the transport and desolvation of zinc ions at the anode/electrolyte interface, reduced the zinc deposition overpotential, and inhibited side reactions. Under a 50% zinc utilization, the symmetrical battery with this protection layer maintained stable cycling for 250 h at 30 mA cm-2. Matched with high-load self-supported vanadium-based cathodes (18-20 mg cm-2), the coin battery with 50% zinc utilization possessed an energy density retention of 94.3% after 1000 cycles at 20 mA cm-2. Furthermore, the assembled pouch battery delivered a whole energy density of 61.3 Wh kg-1, surpassing the highest mass energy density among reported mild zinc batteries, and retained 76.7% of the energy density and 85.3% (0.53 Ah) of the capacity after 300 cycles.

Facile and Stable CuInO2 Nanoparticles for Efficient Electrochemical CO2 Reduction.

Searching for electrocatalysts for the electrochemical CO2 reduction reaction (e-CO2RR) with high selectivity and stability remains a significant challenge. In this study, we design a Cu-CuInO2 composite with stable states of Cu0/Cu+ by electrochemically depositing indium onto CuCl-decorated Cu foil. The catalyst displays superior selectivity toward the CO product, with a maximal Faraday efficiency of 89% at -0.9 V vs the reversible hydrogen electrode, and maintains impressive stability up to 27 h with a retention rate of >76% in Faraday efficiency. Our systematical characterizations reveal that the catalyst's high performance is attributed to CuInO2 nanoparticles. First-principles calculations further confirm that CuInO2(012) is more conducive to CO generation than Cu(111) under applied potential and presents a higher energy barrier than Cu(111) for the hydrogen evolution reaction. These theoretical predictions are consistent with our experimental observations, suggesting that CuInO2 nanoparticles offer a facile catalyst with a high selectivity and stability for e-CO2RR.

Full-depth vertical distribution of planktonic ciliates (Ciliophora) and a novel bio-index for indicating habitat suitability of tintinnid in the Arctic Ocean.

Despite the planktonic ciliate importance in the microzooplankton compartment, their full-depth vertical distribution in the Arctic Ocean was poorly documented as well as the related variations in different water masses. The full-depth community structure of planktonic ciliates was investigated in the Arctic Ocean during summer 2021. The ciliate abundance and biomass decreased rapidly from 200 m to bottom. Five water masses were identified throughout the water column and each one exhibited a unique ciliate community structure. Aloricate ciliates were singled out as the dominant group with average abundance proportion to total ciliates at each depth >95%. Large (>30 µm) and small (10-20 µm) size-fractions of aloricate ciliates were abundant in shallow and deep waters, respectively, which revealed an anti-phase relationship in vertical distribution. Three new record tintinnid species were found during this survey. Pacific-origin species Salpingella sp.1 and Arctic endemic species Ptychocylis urnula occupied the top abundance proportion in the Pacific Summer Water (44.7%) and three water masses (≥38.7%, Mixed Layer Water, Remnant Winter Water, Atlantic-origin Water), respectively. The habitat suitability of tintinnid abundant species was characterised by the Bio-index revealing a distinct death-zone for each species. Variations in survival habitat of abundant tintinnids can be regarded as indicators for the future Arctic climate change. These results provide fundamental data on the microzooplankton response to the intrusion of Pacific waters into the Arctic Ocean upon its rapid warming.

General Synthesis of 2D Magnetic Transition Metal Dihalides via Trihalide Reduction.

Two-dimensional (2D) transition metal dihalides (TMDHs) have been receiving extensive attention due to their diversified magnetic properties and promising applications in spintronics. However, controlled growth of 2D TMDHs remains challenging owing to their extreme sensitivity to atmospheric moisture. Herein, using a home-built nitrogen-filled interconnected glovebox system, a universal chemical vapor deposition synthesis route of high-quality 2D TMDH flakes (1T-FeCl2, FeBr2, VCl2, and VBr2) by reduction of their trihalide counterparts is developed. Representatively, ultrathin (∼8.6 nm) FeCl2 flakes are synthesized on SiO2/Si, while on graphene/Cu foil the thickness can be down to monolayer (1L). Reflective magnetic circular dichroism spectroscopy shows an interlayer antiferromagnetic ordering of FeCl2 with a Neel temperature at ∼17 K. Scanning tunneling microscopy and spectroscopy further identify the atomic-scale structures and band features of 1L and bilayer FeCl2 on graphene/Cu foil.

Filling the Gap between Heteroatom Doping and Edge Enrichment of 2D Electrocatalysts for Enhanced Hydrogen Evolution.

Composition modulation and edge enrichment are established protocols to steer the electronic structures and catalytic activities of two-dimensional (2D) materials. It is believed that a heteroatom enhances the catalytic performance by activating the chemically inert basal plane of 2D crystals. However, the edge and basal plane have inherently different electronic states, and how the dopants affect the edge activity remains ambiguous. Here we provide mechanistic insights into this issue by monitoring the hydrogen evolution reaction (HER) performance of phosphorus-doped MoS2 (P-MoS2) nanosheets via on-chip electrocatalytic microdevices. Upon phosphorus doping, MoS2 nanosheet gets catalytically activated and, more importantly, shows higher HER activity in the edge than the basal plane. In situ transport measurement demonstrates that the improved HER performance of P-MoS2 is derived from intrinsic catalytic activity rather than charge transfer. Density functional theory calculations manifest that the edge sites of P-MoS2 are energetically more favorable for HER. The finding guides the rational design of edge-dominant P-MoS2, reaching a minuscule onset potential of ∼30 mV and Tafel slope of 48 mV/dec that are benchmarked against other activation methods. Our results disclose the hitherto overlooked edge activity of 2D materials induced by heteroatom doping that will provide perspectives for preparing next-generation 2D catalysts.

Tailoring Poly(Styrene-co-maleic anhydride) Networks for All-Polymer Dielectrics Exhibiting Ultrahigh Energy Density and Charge-Discharge Efficiency at Elevated Temperatures.

Polymer film capacitors have been widely used in electronics and electrical power systems due to their advantages of high power densities, fast charge-discharge speed, and great stability. However, the exponential increase of electrical conduction with temperature and applied electric field substantially degrades the capacitive performance of dielectric polymers at elevated temperatures. Here, the first example of controlling the energy level of charge traps in all-organic crosslinked polymers by tailoring molecular structures that significantly inhibit high-field high-temperature conduction loss, which largely differs from current approaches based on the introduction of inorganic fillers, is reported. The polymer network with optimized crosslinking structures exhibits an ultrahigh discharged energy density of 7.02 J cm-3 with charge/discharge efficiencies of >90% at 150 °C, far outperforming current dielectric polymers and composites. The charge-trapping effects in different crosslinked structures, as the origins of the marked improvements in the high-temperature capacitive performance, are comprehensively investigated experimentally and confirmed computationally. Moreover, excellent cyclability and self-healing features are demonstrated in the polymer film capacitors. This work offers a promising pathway of molecular structure design to scalable high-energy-density polymer dielectrics capable of operating under harsh environments.

Surfactant-Free Ultrasonication-Assisted Synthesis of 2d Tellurium Based on Metastable 1T'-MoTe2.

Elemental 2D materials (E2DMs) have been attracting considerable attention owing to their chemical simplicity and excellent/exotic properties. However, the lack of robust chemical synthetic methods seriously limits their potential. Here, a surfactant-free liquid-phase synthesis of high-quality 2D tellurium is reported based on ultrasonication-assisted exfoliation of metastable 1T'-MoTe2 . The as-grown 2D tellurium nanosheets exhibit excellent single crystallinity, ideal 2D morphology, surfactant-free surface, and negligible 1D by-products. Furthermore, a unique growth mechanism based on the atomic escape of Te atoms from metastable transition metal dichalcogenides and guided 2D growth in the liquid phase is proposed and verified. 2D tellurium-based field-effect transistors show ultrahigh hole mobility exceeding 1000 cm2  V-1  s-1 at room temperature attributing to the high crystallinity and surfactant-free surface, and exceptional chemical and operational stability using both solid-state dielectric and liquid-state electrical double layer. The facile ultrasonication-assisted synthesis of high-quality 2D tellurium paves the way for further exploration of E2DMs and expands the scope of liquid-phase exfoliation (LPE) methodology toward the controlled wet-chemical synthesis of functional nanomaterials.

Scalable Polyimide-Organosilicate Hybrid Films for High-Temperature Capacitive Energy Storage.

High-temperature polymer dielectrics have broad application prospects in next-generation microelectronics and electrical power systems. However, the capacitive energy densities of dielectric polymers at elevated temperatures are severely limited by carrier excitation and transport. Herein, a molecular engineering strategy is presented to regulate the bulk-limited conduction in the polymer by bonding amino polyhedral oligomeric silsesquioxane (NH2 -POSS) with the chain ends of polyimide (PI). Experimental studies and density functional theory (DFT) calculations demonstrate that the terminal group NH2 -POSS with a wide-bandgap of Eg ≈ 6.6 eV increases the band energy levels of the PI and induces the formation of local deep traps in the hybrid films, which significantly restrains carrier transport. At 200 °C, the hybrid film exhibits concurrently an ultrahigh discharged energy density of 3.45 J cm-3 and a high gravimetric energy density of 2.74 J g-1 , with the charge-discharge efficiency >90%, far exceeding those achieved in the dielectric polymers and nearly all other polymer nanocomposites. Moreover, the NH2 -POSS terminated PI film exhibits excellent charge-discharge cyclability (>50000) and power density (0.39 MW cm-3 ) at 200 °C, making it a promising candidate for high-temperature high-energy-density capacitors. This work represents a novel strategy to scalable polymer dielectrics with superior capacitive performance operating in harsh environments.