Fe-catalyzed sulfide oxidation in hydrothermal plumes is a source of reactive oxygen species to the ocean.

Historically, the production of reactive oxygen species (ROS) in the ocean has been attributed to photochemical and biochemical reactions. However, hydrothermal vents emit globally significant inventories of reduced Fe and S species that should react rapidly with oxygen in bottom water and serve as a heretofore unmeasured source of ROS. Here, we show that the Fe-catalyzed oxidation of reduced sulfur species in hydrothermal vent plumes in the deep oceans supported the abiotic formation of ROS at concentrations 20 to 100 times higher than the average for photoproduced ROS in surface waters. ROS (measured as hydrogen peroxide) were determined in hydrothermal plumes and seeps during a series of Alvin dives at the North East Pacific Rise. Hydrogen peroxide inventories in emerging plumes were maintained at levels proportional to the oxygen introduced by mixing with bottom water. Fenton chemistry predicts the production of hydroxyl radical under plume conditions through the reaction of hydrogen peroxide with the abundant reduced Fe in hydrothermal plumes. A model of the hydroxyl radical fate under plume conditions supports the role of plume ROS in the alteration of refractory organic molecules in seawater. The ocean's volume circulates through hydrothermal plumes on timescales similar to the age of refractory dissolved organic carbon. Thus, plume-generated ROS can initiate reactions that may affect global ocean carbon inventories.

Manganese Oxidation States in Volcanic Soils across Annual Rainfall Gradients.

Manganese (Mn) exists as Mn(II), Mn(III), or Mn(IV) in soils, and the Mn oxidation state controls the roles of Mn in numerous environmental processes. However, the variations of Mn oxidation states with climate remain unknown. We determined the Mn oxidation states in highly weathered bulk volcanic soils (primary minerals free) across two rainfall gradients covering mean annual precipitation (MAP) of 0.25-5 m in the Hawaiian Islands. With increasing MAP, the soil redox conditions generally shifted from oxic to suboxic and to anoxic despite fluctuating at each site; concurrently, the proportions of Mn(IV) and Mn(II) decreased and increased, respectively. Mn(III) was low at both low and high MAP, but accumulated substantially, up to 80% of total Mn, in soils with prevalent suboxic conditions at intermediate MAP. Mn(III) was likely hosted in Mn(III,IV) and iron(III) oxides or complexed with organic matter, and its distribution among these hosts varied with soil redox potentials and soil pH. Soil redox conditions and rainfall-driven leaching jointly controlled exchangeable Mn(II) in soils, with its concentration peaking at intermediate MAP. The Mn redox chemistry was at disequilibrium, with the oxidation states correlating with long-term average soil redox potentials better than with soil pH. The soil redox conditions likely fluctuated between oxic and anoxic conditions more frequently at intermediate than at low and high MAP, creating biogeochemical hot spots where Mn, Fe, and other redox-sensitive elements may be actively cycled.

Influence of Organic Ligands on the Redox Properties of Fe(II) as Determined by Mediated Electrochemical Oxidation.

Fe(II) has been extensively studied due to its importance as a reductant in biogeochemical processes and contaminant attenuation. Previous studies have shown that ligands can alter aqueous Fe(II) redox reactivity but their data interpretation is constrained by the use of probe compounds. Here, we employed mediated electrochemical oxidation (MEO) as an approach to directly quantify the extent of Fe(II) oxidation in the absence and presence of three model organic ligands (citrate, nitrilotriacetic acid, and ferrozine) across a range of potentials (EH) and pH, thereby manipulating oxidation over a broad range of fixed thermodynamic conditions. Fe(III)-stabilizing ligands enhanced Fe(II) reactivity in thermodynamically unfavorable regions (i.e., low pH and EH) while an Fe(II) stabilizing ligand (ferrozine) prevented oxidation across all thermodynamic regions. We experimentally derived apparent standard redox potentials, EHϕ, for these and other (oxalate, oxalate2, NTA2, EDTA, and OH2) Fe-ligand redox couples via oxidative current integration. Preferential stabilization of Fe(III) over Fe(II) decreased EHϕ values, and a Nernstian correlation between EHϕ and log(KFe(III)/KFe(II)) exists across a wide range of potentials and stability constants. We used this correlation to estimate log(KFe(III)/KFe(II)) for a natural organic matter isolate, demonstrating that MEO can be used to measure iron stability constant ratios for unknown ligands.

Ligand Effects on Biotic and Abiotic Fe(II) Oxidation by the Microaerophile Sideroxydans lithotrophicus.

Organic ligands are widely distributed and can affect microbially driven Fe biogeochemical cycles, but effects on microbial iron oxidation have not been well quantified. Our work used a model microaerophilic Fe(II)-oxidizing bacterium Sideroxydans lithotrophicus ES-1 to quantify biotic Fe(II) oxidation rates in the presence of organic ligands at 0.02 atm O2 and pH 6.0. We used two common Fe chelators with different binding strengths: citrate (log KFe(II)-citrate = 3.20) and nitrilotriacetic acid (NTA) (log KFe(II)-NTA = 8.09) and two standard humic substances, Pahokee peat humic acid (PPHA) and Suwannee River fulvic acid (SRFA). Our results provide rate constants for biotic and abiotic Fe(II) oxidation over different ligand concentrations and furthermore demonstrate that various models and natural iron-binding ligands each have distinct effects on abiotic versus biotic Fe(II) oxidation rates. We show that NTA accelerates abiotic oxidation and citrate has negligible effects, making it a better laboratory chelator. The humic substances only affect biotic Fe(II) oxidation, via a combination of chelation and electron transfer. PPHA accelerates biotic Fe(II) oxidation, while SRFA decelerates or accelerates the rate depending on concentration. The specific nature of organic-Fe microbe interactions may play key roles in environmental Fe(II) oxidation, which have cascading influences on cycling of nutrients and contaminants that associate with Fe oxide minerals.

Light-dependent sulfide oxidation in the anoxic zone of the Chesapeake Bay can be explained by small populations of phototrophic bacteria.

Microbial sulfide oxidation in aquatic environments is an important ecosystem process, as sulfide is potently toxic to aerobic organisms. Sulfide oxidation in anoxic waters can prevent the efflux of sulfide to aerobic water masses, thus mitigating toxicity. The contribution of phototrophic sulfide-oxidizing bacteria to anaerobic sulfide oxidation in the Chesapeake Bay and the redox chemistry of the stratified water column were investigated in the summers of 2011 to 2014. In 2011 and 2013, phototrophic sulfide-oxidizing bacteria closely related to Prosthecochloris species of the phylum Chlorobi were cultivated from waters sampled at and below the oxic-anoxic interface, where measured light penetration was sufficient to support populations of low-light-adapted photosynthetic bacteria. In 2012, 2013, and 2014, light-dependent sulfide loss was observed in freshly collected water column samples. In these samples, extremely low light levels caused 2- to 10-fold increases in the sulfide uptake rate over the sulfide uptake rate under dark conditions. An enrichment, CB11, dominated by Prosthecochloris species, oxidized sulfide with a Ks value of 11 µM and a Vmax value of 51 µM min(-1) (mg protein(-1)). Using these kinetic values with in situ sulfide concentrations and light fluxes, we calculated that a small population of Chlorobi similar to those in enrichment CB11 can account for the observed anaerobic light-dependent sulfide consumption activity in natural water samples. We conclude that Chlorobi play a far larger role in the Chesapeake Bay than currently appreciated. This result has potential implications for coastal anoxic waters and expanding oxygen-minimum zones as they begin to impinge on the photic zone.

Evidence for the role of endosymbionts in regional-scale habitat partitioning by hydrothermal vent symbioses.

Deep-sea hydrothermal vents are populated by dense communities of animals that form symbiotic associations with chemolithoautotrophic bacteria. To date, our understanding of which factors govern the distribution of host/symbiont associations (or holobionts) in nature is limited, although host physiology often is invoked. In general, the role that symbionts play in habitat utilization by vent holobionts has not been thoroughly addressed. Here we present evidence for symbiont-influenced, regional-scale niche partitioning among symbiotic gastropods (genus Alviniconcha) in the Lau Basin. We extensively surveyed Alviniconcha holobionts from four vent fields using quantitative molecular approaches, coupled to characterization of high-temperature and diffuse vent-fluid composition using gastight samplers and in situ electrochemical analyses, respectively. Phylogenetic analyses exposed cryptic host and symbiont diversity, revealing three distinct host types and three different symbiont phylotypes (one ε-proteobacteria and two γ-proteobacteria) that formed specific associations with one another. Strikingly, we observed that holobionts with ε-proteobacterial symbionts were dominant at the northern fields, whereas holobionts with γ-proteobacterial symbionts were dominant in the southern fields. This pattern of distribution corresponds to differences in the vent geochemistry that result from deep subsurface geological and geothermal processes. We posit that the symbionts, likely through differences in chemolithoautotrophic metabolism, influence niche utilization among these holobionts. The data presented here represent evidence linking symbiont type to habitat partitioning among the chemosynthetic symbioses at hydrothermal vents and illustrate the coupling between subsurface geothermal processes and niche availability.

In vivo speciation studies and antioxidant properties of bromine in Laminaria digitata reinforce the significance of iodine accumulation for kelps.

The metabolism of bromine in marine brown algae remains poorly understood. This contrasts with the recent finding that the accumulation of iodide in the brown alga Laminaria serves the provision of an inorganic antioxidant - the first case documented from a living system. The aim of this study was to use an interdisciplinary array of techniques to study the chemical speciation, transformation, and function of bromine in Laminaria and to investigate the link between bromine and iodine metabolism, in particular in the antioxidant context. First, bromine and iodine levels in different Laminaria tissues were compared by inductively coupled plasma MS. Using in vivo X-ray absorption spectroscopy, it was found that, similarly to iodine, bromine is predominantly present in this alga in the form of bromide, albeit at lower concentrations, and that it shows similar behaviour upon oxidative stress. However, from a thermodynamic and kinetic standpoint, supported by in vitro and reconstituted in vivo assays, bromide is less suitable than iodide as an antioxidant against most reactive oxygen species except superoxide, possibly explaining why kelps prefer to accumulate iodide. This constitutes the first-ever study exploring the potential antioxidant function of bromide in a living system and other potential physiological roles. Given the tissue-specific differences observed in the content and speciation of bromine, it is concluded that the bromide uptake mechanism is different from the vanadium iodoperoxidase-mediated uptake of iodide in L. digitata and that its function is likely to be complementary to the iodide antioxidant system for detoxifying superoxide.

The molecular biogeochemistry of manganese(II) oxidation.

Micro-organisms capable of oxidizing the redox-active transition metal manganese play an important role in the biogeochemical cycle of manganese. In the present mini-review, we focus specifically on Mn(II)-oxidizing bacteria. The mechanisms by which bacteria oxidize Mn(II) include a two-electron oxidation reaction catalysed by a novel multicopper oxidase that produces Mn(IV) oxides as the primary product. Bacteria also produce organic ligands, such as siderophores, that bind to and stabilize Mn(III). The realization that this stabilized Mn(III) is present in many environments and can affect the redox cycles of other elements such as sulfur has made it clear that manganese and the bacteria that oxidize it profoundly affect the Earth's biogeochemistry.

Quantitative assessment of the sulfuric acid contribution to new particle growth.

The Nano Aerosol Mass Spectrometer (NAMS) was deployed to rural/coastal and urban sites to measure the composition of 20-25 nm diameter nanoparticles during new particle formation (NPF). NAMS provides a quantitative measure of the elemental composition of individual, size-selected nanoparticles. In both environments, particles analyzed during NPF were found to be enhanced in elements associated with inorganic species (nitrogen, sulfur) relative to that associated with organic species (carbon). A molecular apportionment algorithm was applied to the elemental data in order to place the elemental composition into a molecular context. These measurements show that sulfate constitutes a substantial fraction of total particle mass in both environments. The contribution of sulfuric acid to new particle growth was quantitatively determined and the gas-phase sulfuric acid concentration required to incorporate the measured sulfate fraction was calculated. The calculated values were compared to those calculated by a sulfuric acid proxy that considers solar radiation and SO(2) levels. The two values agree within experimental uncertainty. Sulfate accounts for 29-46% of the total mass growth of particles. Other species contributing to growth include ammonium, nitrate, and organics. For each location, the relative amounts of these species do not change significantly with growth rate. However, for the coastal location, sulfate contribution increases with increasing temperature whereas nitrate contribution decreases with increasing temperature.

Iodide accumulation provides kelp with an inorganic antioxidant impacting atmospheric chemistry.

Brown algae of the Laminariales (kelps) are the strongest accumulators of iodine among living organisms. They represent a major pump in the global biogeochemical cycle of iodine and, in particular, the major source of iodocarbons in the coastal atmosphere. Nevertheless, the chemical state and biological significance of accumulated iodine have remained unknown to this date. Using x-ray absorption spectroscopy, we show that the accumulated form is iodide, which readily scavenges a variety of reactive oxygen species (ROS). We propose here that its biological role is that of an inorganic antioxidant, the first to be described in a living system. Upon oxidative stress, iodide is effluxed. On the thallus surface and in the apoplast, iodide detoxifies both aqueous oxidants and ozone, the latter resulting in the release of high levels of molecular iodine and the consequent formation of hygroscopic iodine oxides leading to particles, which are precursors to cloud condensation nuclei. In a complementary set of experiments using a heterologous system, iodide was found to effectively scavenge ROS in human blood cells.

Commemorating two centuries of iodine research: an interdisciplinary overview of current research.

Iodine was discovered as a novel element in 1811 during the Napoleonic Wars. To celebrate the bicentennial anniversary of this event we reflect on the history and highlight the many facets of iodine research that have evolved since its discovery. Iodine has an impact on many aspects of life on Earth as well as on human civilization. It is accumulated in high concentrations by marine algae, which are the origin of strong iodine fluxes into the coastal atmosphere which influence climatic processes, and dissolved iodine is considered a biophilic element in marine sediments. Iodine is central to thyroid function in vertebrates, with paramount implications for human health. Iodine can exist in a wide range of oxidation states and it features a diverse supramolecular chemistry. Iodine is amenable to several analytical techniques, and iodine compounds have found widespread use in organic synthesis. Elemental iodine is produced on an industrial scale and has found a wide range of applications in innovative materials, including semiconductors--in particular, in solar cells.

Spectroscopic determination of the size of cadmium sulfide nanoparticles formed under environmentally relevant conditions.

A multi-technique approach was adopted using UV/visible spectroscopy, fluorescence spectroscopy, dynamic light scattering (DLS), and transmission electron microscopy (TEM) in the characterization of cadmium sulfide (CdS) nanoparticles. CdS nanoparticle sizes could be determined by the Brus equation, which relates the UV/vis spectroscopic properties of CdS nanoparticles to size based on the quantum confinement effect. The diameters calculated from the wavelength of absorbance in UV/vis spectra were within 10% of the mean nanoparticle diameter measured in TEM. UV/vis spectroscopy provided an aqueous phase measurement of the CdS core size of the nanoparticles (<2 nm to approximately 10 nm diameter) that is based on a physical property rather than light scattering. CdS nanoparticles readily formed upon addition of sulfide to a Cd(ii)-thiolate complex with the thiolate molecules acting as capping agents that passivate the nanoparticle surface, thereby preventing bulk mineral precipitation. Using UV/vis as a method of nanoparticle sizing, we were able to demonstrate how aqueous conditions dictate the resulting nanoparticle size. High pH, capping thiolate concentration and Cd : S ratio all resulted in smaller nanoparticles. Ionic strength did not influence nanoparticle size, but DLS data indicate the formation of aggregates above ionic strengths of 0.1 M.

Mn speciation at nanomolar concentrations with a porphyrin competitive ligand and UV-vis measurements.

We describe the modification of the porphyrin method for low-level determination of the speciation of dissolved Mn in seawater. First, an investigation of sensitivity of the method versus the salinity, the reagent composition and the type of ligands present is described for a few micromolar of dissolved Mn. Then, using certified seawater reference standards, we demonstrate the accuracy of the method for total concentrations of manganese between 1 and 10 nM. To this aim, we report the reactivity of solutions made of Mn(II) and Mn(III) bound to Tiron and DFOB with our optimized porphyrin reagent which includes adding excess Cd2+, and compare these results with data from representative natural seawater samples. This work describes an improved method that gives the opportunity for future work to investigate Mn speciation at nanomolar concentration in the open ocean.

A durable and inexpensive pump profiler to monitor stratified water columns with high vertical resolution.

A pump profiling system for real time sample collection has been constructed for a cost of <$1000 (USD) and mated with a ship's rosette that has conductivity, temperature, depth (CTD) and other sensors. The system permits the collection of ~15 L of water in one minute without exposure to O2 from air for discrete sampling of chemical, microbial and other constituents as well as for real time analyses using sensors. We also coupled a shipboard voltammetry system with solid-state microelectrodes to detect dissolved O2 and H2S. Electrode O2 detection limits (DL) are ~3 µM and compare well with in situ Clark electrode O2 data (DL ~2 µM) from the ship's CTD rosette system. H2S measurements also were reliable, based on previously compared methods. Best resolution of the profiling system can be as small as its orifice of 2.54 cm (0.0254 m) in a quiet sea state, which is an improvement over the maximum resolution achievable using 10 L Niskin bottles that are 1 m in length.

Concentrations of reactive Mn(III)-L and MnO2 in estuarine and marine waters determined using spectrophotometry and the leuco base, leucoberbelin blue.

In terms of its oxidative strength, the MnO2/Mn2+ couple is one of the strongest in the aquatic environment. The intermediate oxidation state, manganese(III), is stabilized by a range of organic ligands (Mn(III)-L) and some of these complexes are also strong oxidants or reductants. Here, we present improved methods for quantifying soluble reactive oxidized manganese(III) and particulate reactive oxidized manganese at ultra-low concentrations; the respective detection limits are 6.7 nM and 7 pM (100-cm spectrophotometric path length) and 260 nM and 2.6 nM (1-cm path length). The methods involve a simple, specific, spectrophotometric technique using a water-soluble leuco base (leucoberbelin blue; LBB). LBB is oxidized by manganese through a hydrogen atom transfer reaction forming a colored complex that is stoichiometrically related to the oxidation state of the manganese, either Mn(III)-L or manganese(III,IV) oxides (MnOx). At the concentration of LBB used in this study, nitrite may be a minor interference, so we provide concentration ranges over which it interferes and suggest potential strategies to mitigate the interference. Unlike previous methods devised to quantify Mn(III)-L, which use ligand exchange reactions, the LBB oxidation requires an electron and therefore needs to physically contact manganese(III) for inner-sphere electron transfer to occur. The method for measuring soluble Mn(III)-L was evaluated in the laboratory, and LBB was found to be oxidized by an extensive suite of weak Mn(III)-L complexes, as it is by MnOx, but could not react with or reacted very slowly with strong Mn(III)-L complexes. According to the molecular structures of the Mn(III)-L complexes tested, LBB can also be used to qualitatively assess the binding strength of Mn(III)-L complexes based on metal-chelate structural considerations. The assays for soluble Mn(III)-L (membrane filtered) and particulate manganese oxides (trapped by membrane filters) were applied to the well-oxygenated estuarine waters of the Saguenay Fjord, a major tributary of the Lower St. Lawrence Estuary, and to Western North Atlantic oceanic waters, off the continental shelf, where there is an oxygen minimum zone (< 67% O2 saturation). The methods applied can be used in the field or onboard ships and provide important new insights into oxidized manganese speciation.

Abiotic synthesis of graphite in hydrothermal vents.

Deciphering the origin, age, and composition of deep marine organic carbon remains a challenge in understanding the dynamics of the marine carbon cycle. In particular, the composition of aged organic carbon and what allows its persistence in the deep ocean and in sediment is unresolved. Here, we observe that both high and low temperature hydrothermal vents at the 9° 50' N; 104° 17.5 W East Pacific Rise (EPR) vent field are a source for (sub)micron-sized graphite particles. We demonstrate that commonly applied analytical techniques for quantification of organic carbon detect graphite. These analyses thereby classify graphite as either dissolved or particulate organic carbon, depending on the particle size and filtration method, and overlook its relevance as a carbon source to the deep ocean. Settling velocity calculations indicate the potential for these (sub)micron particles to become entrained in the buoyant plume and distributed far from the vent fields. Thus, our observations provide direct evidence for hydrothermal vents acting as a source of old carbon to the deep ocean.

Iron and sulfide nanoparticle formation and transport in nascent hydrothermal vent plumes.

Deep-sea hydrothermal vents are a significant source of dissolved metals to the global oceans, producing midwater plumes enriched in metals that are transported thousands of kilometers from the vent source. Particle precipitation upon emission of hydrothermal fluids controls metal speciation and the magnitude of metal export. Here, we document metal sulfide particles, including pyrite nanoparticles, within the first meter of buoyant plumes from three high-temperature vents at the East Pacific Rise. We observe a zone of particle settling 10-20 cm from the orifice, indicated by stable sulfur isotopes; however, we also demonstrate that nanoparticulate pyrite (FeS2) is not removed from the plume and can account for over half of the filtered Fe (≤0.2 µm) up to one meter from the vent orifice. The persistence of nanoparticulate pyrite demonstrates that it is an important mechanism for near-vent Fe stabilisation and highlights the potential role of nanoparticles in element transport.

The Fe(II)-oxidizing Zetaproteobacteria: historical, ecological and genomic perspectives.

The Zetaproteobacteria are a class of bacteria typically associated with marine Fe(II)-oxidizing environments. First discovered in the hydrothermal vents at Loihi Seamount, Hawaii, they have become model organisms for marine microbial Fe(II) oxidation. In addition to deep sea and shallow hydrothermal vents, Zetaproteobacteria are found in coastal sediments, other marine subsurface environments, steel corrosion biofilms and saline terrestrial springs. Isolates from a range of environments all grow by autotrophic Fe(II) oxidation. Their success lies partly in their microaerophily, which enables them to compete with abiotic Fe(II) oxidation at Fe(II)-rich oxic/anoxic transition zones. To determine the known diversity of the Zetaproteobacteria, we have used 16S rRNA gene sequences to define 59 operational taxonomic units (OTUs), at 97% similarity. While some Zetaproteobacteria taxa appear to be cosmopolitan, others are enriched by specific habitats. OTU networks show that certain Zetaproteobacteria co-exist, sharing compatible niches. These niches may correspond with adaptations to O2, H2 and nitrate availability, based on genomic analyses of metabolic potential. Also, a putative Fe(II) oxidation gene has been found in diverse Zetaproteobacteria taxa, suggesting that the Zetaproteobacteria evolved as Fe(II) oxidation specialists. In all, studies suggest that Zetaproteobacteria are widespread, and therefore may have a broad influence on marine and saline terrestrial Fe cycling.

Natural, incidental, and engineered nanomaterials and their impacts on the Earth system.

Nanomaterials are critical components in the Earth system's past, present, and future characteristics and behavior. They have been present since Earth's origin in great abundance. Life, from the earliest cells to modern humans, has evolved in intimate association with naturally occurring nanomaterials. This synergy began to shift considerably with human industrialization. Particularly since the Industrial Revolution some two-and-a-half centuries ago, incidental nanomaterials (produced unintentionally by human activity) have been continuously produced and distributed worldwide. In some areas, they now rival the amount of naturally occurring nanomaterials. In the past half-century, engineered nanomaterials have been produced in very small amounts relative to the other two types of nanomaterials, but still in large enough quantities to make them a consequential component of the planet. All nanomaterials, regardless of their origin, have distinct chemical and physical properties throughout their size range, clearly setting them apart from their macroscopic equivalents and necessitating careful study. Following major advances in experimental, computational, analytical, and field approaches, it is becoming possible to better assess and understand all types and origins of nanomaterials in the Earth system. It is also now possible to frame their immediate and long-term impact on environmental and human health at local, regional, and global scales.

Formation of Zn- and Fe-sulfides near hydrothermal vents at the Eastern Lau Spreading Center: implications for sulfide bioavailability to chemoautotrophs.

BACKGROUND: The speciation of dissolved sulfide in the water immediately surrounding deep-ocean hydrothermal vents is critical to chemoautotrophic organisms that are the primary producers of these ecosystems. The objective of this research was to identify the role of Zn and Fe for controlling the speciation of sulfide in the hydrothermal vent fields at the Eastern Lau Spreading Center (ELSC) in the southern Pacific Ocean. Compared to other well-studied hydrothermal systems in the Pacific, the ELSC is notable for unique ridge characteristics and gradients over short distances along the north-south ridge axis. RESULTS: In June 2005, diffuse-flow (< 50 degrees C) and high-temperature (> 250 degrees C) vent fluids were collected from four field sites along the ELSC ridge axis. Total and filtered Zn and Fe concentrations were quantified in the vent fluid samples using voltammetric and spectrometric analyses. The results indicated north-to-south variability in vent fluid composition. In the high temperature vent fluids, the ratio of total Fe to total Zn varied from 39 at Kilo Moana, the most northern site, to less than 7 at the other three sites. The concentrations of total Zn, Fe, and acid-volatile sulfide indicated that oversaturation and precipitation of sphalerite (ZnS(s)) and pyrite (FeS2(s)) were possible during cooling of the vent fluids as they mixed with the surrounding seawater. In contrast, most samples were undersaturated with respect to mackinawite (FeS(s)). The reactivity of Zn(II) in the filtered samples was tested by adding Cu(II) to the samples to induce metal-exchange reactions. In a portion of the samples, the concentration of labile Zn2+ increased after the addition of Cu(II), indicating the presence of strongly-bound Zn(II) species such as ZnS clusters and nanoparticles. CONCLUSION: Results of this study suggest that Zn is important to sulfide speciation at ELSC vent habitats, particularly at the southern sites where Zn concentrations increase relative to Fe. As the hydrothermal fluids mix with the ambient seawater, Zn-sulfide clusters and nanoparticles are likely preventing sulfide oxidation by O2 and reducing bioavailability of S(-II) to organisms.