One Stone, Two Birds: High-Brightness Aggregation-Induced Emission Photosensitizers for Super-Resolution Imaging and Photodynamic Therapy.

Most aggregation-induced emission (AIE) luminogens exhibit high brightness, excellent photostability, and good biocompatibility, but these AIE-active agents, which kill two birds with one stone to result in applications in both stimulated emission depletion (STED) super-resolution imaging and photodynamic therapy (PDT), have not been reported yet but are urgently needed. To meet the requirements of STED nanoscopy and PDT, D-A-π-A-D type DTPABT-HP is designed by tuning conjugated π spacers. It exhibits red-shifted emission, high PLQY of 32.04%, and impressive 1O2 generation (9.24 fold compared to RB) in nanoparticles (NPs). Then, DTPABT-HP NPs are applied in cell imaging via STED nanoscopy, especially visualizing the dynamic changes of lysosomes in the PDT process at ultrahigh resolution. After that, in vivo PDT was also conducted by DTPABT-HP NPs, resulting in significantly inhibited tumor growth, with an inhibition rate of 86%. The work here is beneficial to the design of multifunctional agents and the deep understanding of their phototheranostic mechanism in biological research.

Enhanced Aggregation-Induced Delayed Electrochemiluminescence Triggered by Spatial Perturbation of Organic Dots.

Development of highly efficient, heavy-metal-free electrochemiluminescence (ECL) materials is attractive but still challenging. Herein, we report an aggregation-induced delayed ECL (AIDECL) active organic dot (OD) composed of a tert-butoxy-group-substituted benzophenone-dimethylacridine compound, which shows high ECL efficiency. The resultant ODs exhibit 2.1-fold higher ECL efficiency compared to control AIDECL-active ODs. Molecular stacking combined with theoretical calculations suggests that tert-butoxy groups effectively participate in the intermolecular interactions, further inhibiting the molecular motions in the aggregated states and thus accelerating radiative decay. On the basis of these ODs exhibiting excellent ECL performance, a proof-of-concept biosensor is constructed for the detection of miR-16 associated with Alzheimer's disease, which demonstrates excellent detection ability with the limit of detection of 1.7 fM. This work provides a new approach to improve the ECL efficiency and enriches the fundamental understanding of the structure-property relationship.

Organic Phosphorescent Hopper-Shaped Microstructures.

Hopper-shaped microcrystals, an unusual type of crystal with a large specific surface area, are promising for use in catalysis, drug delivery, and gas sensors. In contrast to well-studied inorganic hopper-shaped crystals, organic phosphorescent concave hopper-shaped microstructures are rarely reported. This study reports the synthesis of two types of organic stepped indented hopper-shaped microstructures with efficient room temperature phosphorescence (RTP) using a liquid phase self-assembly strategy. The formation mechanism is attributed to the interfacial instability induced by the concentration gradient and selective etching. Compared with flat microstructures, the stepped indented hopper-like RTP microstructures exhibit high sensitivity to oxygen. This work also demonstrates that packing the photochromic material into the concave hopper "vessel" effectively controls the switch of phosphorescence from energy transfer, expanding the potential applications of phosphorescent materials.

Modulating Heavy Atom Effect in Germylene for Persistent Room Temperature Phosphorescence.

It is worth but still challenging to develop the low-valent main group compounds with persistent room temperature phosphorescence (pRTP). Herein, we presented germylene-based persistent phosphors by introduction of low-valent Ge center into chromophore. A novel phosphors CzGe and its series of derivatives, namely CzGeS, CzGeSe, CzGeAu, and CzGeCu, were synthesized. Experiments and theoretical calculations reveal that the pRTP behavior were "turn on" due to the heavy atom effect of germylene. More importantly, the low-valent of oxidation state and structural traits propelled GeCz had a balance between the intersystem crossing and the shortening of lifetime caused by the heavy atoms, resulting the ultralong lifetime of 309 ms and phosphorescent quantum efficiency of 15.84 %, which is remarkable among heavy main group phosphors. This research provides valuable insights to the design of heavy atoms in phosphors and expand the applications of germylene chemistry.

Gallic acid-selenium nanoparticles with dual anti-inflammatory and antioxidant functions for synergistic treatment of acute kidney injury.

The overexpression of inflammatory factors is closely related to the pathogenesis of acute kidney injury (AKI). Additionally, the overproduction of reactive oxygen species (ROS) further exacerbates the inflammatory response. In light of this, monotherapies focused solely on inflammation have proven to be suboptimal. Therefore, this study successfully developed a nanoparticle (SC@Se/GA) that possesses anti-inflammatory and antioxidant properties. The SC@Se/GA has a smaller size, better stability, and kidney-targeting. In vivo experiments showed that the GPx enzyme activity of SC@Se/GA increases by almost 50 % more than SC@Se alone, indicating its efficient ability to scavenge ROS. In the meantime, SC@Se/GA has a longer renal retention period (>24 h) than free drug GA, which can dramatically lower the levels of inflammatory factors TNF-α and IL-6. In summary, SC@Se/GA, through its synergistic anti-inflammatory and antioxidant effects, markedly alleviates CDDP-induced renal injury and restores renal function, providing a new effective strategy for treating AKI.

Think-aloud approach combined with case-based learning in nursing teaching round for new nurses in cancer hospital.

BACKGROUND: The transition from nursing students to working as new nurses can be a challenging process. This study aimed to assess the efficacy of a pedagogical approach amalgamating the think-aloud approach and case-based learning in the instructional rounds for new nurses. METHODS: Utilizing convenience sampling, new nurses were selected between 2020 and 2021 in China cancer hospital. A total of 98 participants agreed to participate, with 50 enrolled in 2020 as the control group and 48 in 2021 as the observation group. Across a span of weeks 1, 3, 5, 7, 9, and 11, each clinical department conducted six teaching rounds. The observation group engaged in teaching rounds combining the think-aloud approach with case-based learning, whereas the control group solely utilized case-based learning. Disparities in case analysis scores and critical thinking ability between the two groups were scrutinized, alongside an analysis of learning strategies and the observation group feedback. RESULTS: The observation group exhibited superior case analysis scores (91.92 ± 6.33) and overall critical thinking ability scores (308.39 ± 35.88) in comparison to the control group, which scored (85.27 ± 5.39) and (275.11 ± 31.32) respectively, reflecting statistically significant variances (t = 1.868 ~ 6.361, P < 0.05). Predominant learning strategies employed in the observation group ranged from cognitive to meta-cognitive, followed by psychosocial strategies. During interviews focused on nurses' feedback on the learning process, themes emerged surrounding the enhancement of learning proficiency, invigoration of learning enthusiasm, and bolstering psychological well-being. CONCLUSION: The combination of think-aloud approach and case-based learning in nursing teaching rounds greatly improves the efficiency of training and the critical thinking acuity of new nurses. Concurrently, it facilitated an evaluation of learning strategies, thereby offering valuable insights for the nursing teaching rounds of new nurse.

Ground-State Orbital Descriptors for Accelerated Development of Organic Room-Temperature Phosphorescent Materials.

Organic materials with room-temperature phosphorescence (RTP) are in high demand for optoelectronics and bioelectronics. Developing RTP materials highly relies on expert experience and costly excited-state calculations. It is a challenge to find a tool for effectively screening RTP materials. Herein we first establish ground-state orbital descriptors (πFMOs ) derived from the π-electron component of the frontier molecular orbitals to characterize the RTP lifetime (τp ), achieving a balance in screening efficiency and accuracy. Using the πFMOs , a data-driven machine learning model gains a high accuracy in classifying long τp , filtering out 836 candidates with long-lived RTP from a virtual library of 19,295 molecules. With the aid of the excited-state calculations, 287 compounds are predicted with high RTP efficiency. Impressively, experiments further confirm the reliability of this workflow, opening a novel avenue for designing high-performance RTP materials for potential applications.

Achieving High-Temperature Phosphorescence by Organic Cocrystal Engineering.

Organic phosphors offer a promising alternative in optoelectronics, but their temperature-sensitive feature has restricted their applications in high-temperature scenarios, and the attainment of high-temperature phosphorescence (HTP) is still challenging. Herein, a series of organic cocrystal phosphors are constructed by supramolecular assembly with an ultralong emission lifetime of up to 2.16 s. Intriguingly, remarkable stabilization of triplet excitons can also be realized at elevated temperature, and green phosphorescence is still exhibited in solid state even up to 150 °C. From special molecular packing within the crystal lattice, it has been observed that the orientation of isolated water cluster and well-controlled molecular organization via multiple interactions can favor the structural rigidity of cocrystals more effectively to suppress the nonradiative transition, thus resulting in efficient room-temperature phosphorescence and unprecedented survival of HTP.

MnO4--Triggered Immediate-Stable Real-Time Fluorescence Immunosensor with High Response Speed and Low Steady-State Error.

Real-time chemical and biological sensing in vitro is important for application in health and environmental monitoring. Thus, a more rapid and stable detection method is urgently needed. Herein, an immediate-stable real-time fluorescent immunosensor with a high response speed (∼100%, <1 s) and approximately zero steady-state error is constructed. The developed sensor is based on the MnO4--triggered in situ immediate-stable fluorogenic reaction between dopamine and orcinol monohydrate to produce azamonardine (DMTM). The obtained DMTM is identified and characterized by high-resolution mass spectrometry, 1H NMR spectroscopy, 13C NMR spectroscopy, and theoretical calculations. The present sensor achieves a highly sensitive detection of dopamine (DA) with a limit of detection (LOD) of 10 nM as well as alkaline phosphates (ALP) with an LOD of 0.1 mU/mL by using orcinol monohydrate phosphate sodium salt as a substrate. As a proof of concept, ALP-triggered fluorescence ELISA using cardiac troponin I (cTnI) as a model antigen target is further constructed. The developed real-time sensor achieves the detection of cTnI with an LOD of 0.05 ng/mL. Moreover, the sensor proposed by us is successfully applied to assess the cTnI level in clinical serum specimens and yields results consistent with those obtained by the commercial ELISA method. The immediate-stable real-time fluorescence immunosensor provides a promising and powerful platform for the trace detection of biomolecules in clinical diagnosis.

Ultralong Organic Phosphorescence: From Material Design to Applications.

Organic phosphorescence is defined as a radiative transition between the different spin multiplicities of an organic molecule after excitation; here, we refer to the photoexcitation. Unlike fluorescence, it shows a long emission lifetime (∼µs), large Stokes shift, and rich excited state properties, attracting considerable attention in organic electronics during the past years. Ultralong organic phosphorescence (UOP), a type of persistent luminescence in organic phosphors, shows an emission lifetime of over 100 ms normally according to the resolution limit of the naked eye. According to the Jablonski energy diagram, two prerequisites are necessary for UOP generation and enhancement. One is to promote intersystem crossing (ISC) of the excitons from the excited singlet to triplet states by enhancing the spin-orbit coupling (SOC); the other is to suppress the nonradiative transitions of the excitons from the excited triplet states.In this Account, we will give a summary of our research on ultralong organic phosphorescence, including the design of materials, manipulation of properties, fabrication of nano/microstructures, and function applications. First, we give a brief introduction to the UOP development. Then, we discuss the constructed methods of UOP materials from the inter/intramolecular interaction types, including π-π interactions, intermolecular hydrogen bonds, halogen bonds, ionic bonds, covalent bonds, and so on. These effective interactions can build a rigid environment to restrain the nonradiative transitions from the molecular motions or external quenching by oxygen, moisture, or heat, and thus enhance the UOP performance. Next, the manipulation of UOP properties, containing excitation wavelength, emission colors, lifetimes, and quantum efficiency (QE), through molecular or crystal engineering will be summarized. Recently, the excitation wavelengths of the materials for UOP can be regulated in different regions, such as UV, visible light, and X-ray; the emission colors of UOP can cover the whole visible-light region, from deep blue to red; the phosphorescence lifetime of UOP materials can reach 2.5 s, and the quantum efficiency can be achieved up to 96.5%. Moreover, we will present the fabrication of micro/nanoscale UOP materials, including the preparation of micro/nanostructure, optical performance, and device fabrication. Afterward, we will review the potential applications of UOP materials in organic/bio-optoelectronics, such as information encryption, bioimaging, sensing, afterglow display, etc. Finally, an outlook on the development of UOP materials and applications will be proposed.

Highly Twisted Conformation Thiopyrylium Photosensitizers for In Vivo Near Infrared-II Imaging and Rapid Inactivation of Coronavirus.

Despite significant effort, a majority of heavy-atom-free photosensitizers have short excitation wavelengths, thereby hampering their biomedical applications. Here, we present a facile approach for developing efficient near-infrared (NIR) heavy-atom-free photosensitizers. Based on a series of thiopyrylium-based NIR-II (1000-1700 nm) dyads, we found that the star dyad HD with a sterically bulky and electron-rich moiety exhibited configuration torsion and significantly enhanced intersystem crossing (ISC) compared to the parent dyad. The electron excitation characteristics of HD changed from local excitation (LE) to charge transfer (CT)-domain, contributing to a ≈6-fold reduction in energy gap (ΔEST ), a ≈10-fold accelerated ISC process, and a ≈31.49-fold elevated reactive oxygen species (ROS) quantum yield. The optimized SP@HD-PEG2K lung-targeting dots enabled real-time NIR-II lung imaging, which precisely guided rapid pulmonary coronavirus inactivation.

Aggregation-Induced Emission by Molecular Design: A Route to High-Performance Light-Emitting Electrochemical Cells.

The emission efficiency of organic semiconductors (OSCs) often suffers from aggregation caused quenching (ACQ). An elegant solution is aggregation-induced emission (AIE), which constitutes the design of the OSC so that its morphology inhibits quenching π-π interactions and non-radiative motional deactivation. The light-emitting electrochemical cell (LEC) can be sustainably fabricated, but its function depends on motion of bulky ions in proximity of the OSC. It is therefore questionable whether the AIE morphology can be retained during LEC operation. Here, we synthesize two structurally similar OSCs, which are distinguished by that 1 features ACQ while 2 delivers AIE. Interestingly, we find that the AIE-LEC significantly outperforms the ACQ-LEC. We rationalize our finding by showing that the AIE morphology remains intact during LEC operation, and that it can feature appropriately sized free-volume voids for facile ion transport and suppressed non-radiative excitonic deactivation.

Efficient Visible-Light-Activated Ultra-Long Room-Temperature Phosphorescence Triggered by Multi-Esterification.

The development of ultra-long room-temperature phosphorescence (UL-RTP) in processable amorphous organic materials is highly desirable for applications in flexible displays, anti-counterfeiting, and bio-imaging. However, achieving efficient UL-RTP from amorphous materials remains a challenging task, especially with activation by visible light and a bright afterglow. Here we report a general and rational molecular-design strategy to enable efficient visible-light-excited UL-RTP by multi-esterification of a rigid large-plane phosphorescence core. Notably, multi-esterification minimizes the aggregation-induced quenching and accomplishes a 'four birds with one stone' possibility in the generation and radiation process of UL-RTP: i) shifting the excitation from ultraviolet light to blue-light through enhancing the transition dipole moment of low-lying singlet-states, ii) facilitating the intersystem crossing process through the incorporation of lone-pair electrons, iii) boosting the decay process of long-lived triplet excitons resulting from a significantly increased transition dipole moment, and iv) reducing the intrinsic triplet nonradiative decay by substitution of high-frequency vibrating hydrogen atoms. All these factors synergistically contribute to the most efficient and stable visible-light-stimulated UL-RTP (lifetime up to 2.01 s and efficiency up to 35.4 % upon excitation at 450 nm) in flexible films using multi-esterified coronene, which allows high-tech applications in single-component time-delayed white light-emitting diodes and information technology based on flashlight-activated afterglow encryption.

Organic Excitonic State Management by Surface Metallic Coupling of Inorganic Lanthanide Nanocrystals.

The ability to harness charges and spins for control of organic excitonic states is critical in developing high-performance organic luminophores and optoelectronic devices. Here we report a facile strategy to efficiently manipulate the electronic energy states of various organic phosphors by coupling them with inorganic lanthanide nanocrystals. We show that the metallic atoms exposed on the nanocrystal surface can introduce strong coupling effects to 9-(4-ethoxy-6-phenyl-1,3,5-triazin-2-yl)-9H-carbazole (OCzT) and some organic chromophores with carbazole functional groups when the organics are approaching the nanocrystals. This unconventional organic-inorganic hybridization enables a nearly 100 % conversion of the singlet excitation to fast charge transfer luminescence that does not exist in pristine organics, which broadens the utility of organic phosphors in hybrid systems.

Confining isolated chromophores for highly efficient blue phosphorescence.

High-efficiency blue phosphorescence emission is essential for organic optoelectronic applications. However, synthesizing heavy-atom-free organic systems having high triplet energy levels and suppressed non-radiative transitions-key requirements for efficient blue phosphorescence-has proved difficult. Here we demonstrate a simple chemical strategy for achieving high-performance blue phosphors, based on confining isolated chromophores in ionic crystals. Formation of high-density ionic bonds between the cations of ionic crystals and the carboxylic acid groups of the chromophores leads to a segregated molecular arrangement with negligible inter-chromophore interactions. We show that tunable phosphorescence from blue to deep blue with a maximum phosphorescence efficiency of 96.5% can be achieved by varying the charged chromophores and their counterions. Moreover, these phosphorescent materials enable rapid, high-throughput data encryption, fingerprint identification and afterglow display. This work will facilitate the design of high-efficiency blue organic phosphors and extend the domain of organic phosphorescence to new applications.

Theory of Long-Lived Room-Temperature Phosphorescence in Organic Aggregates.

ConspectusRoom-temperature phosphorescence (RTP) with a long afterglow from purely organic molecular aggregates has recently attracted many investigations because traditionally only inorganic and transition-metal complexes can emit phosphorescence at room temperature. Purely organic molecules can exhibit phosphorescence only at cryogenic temperatures and under inert conditions in solution. However, recently, a number of organic compounds have been found to demonstrate bright RTP upon aggregation, sometimes with a remarkable morphology dependence. We intended to rationalize such aggregation-induced organic RTP through theoretical investigation and quantum chemistry calculations by invoking intermolecular interaction effects. And we have identified the molecular descriptors for the molecular design of RTP materials.In this Account, we started with the proposition of the mechanism of intermolecular electrostatic-interaction-induced RTP at the molecular level by using molecular dynamics simulations, hybrid quantum mechanics, and molecular mechanics (QM/MM) coupled with the thermal vibration correlation function (TVCF) formalism we developed earlier. The effective intermolecular electrostatic interactions could stem from a variety of interactions in different organic RTP crystals, such as hydrogen bonding, π-halogen bonding, anion-π+ interaction, and d-pπ bonds and so forth. We find that these interactions can change the molecular orbital compositions involved in the lowest-lying singlet and triplet excited states that are responsible for phosphorescence, either through facilitating intersystem crossing from the excited-state singlet to the triplet and/or suppressing the nonradiative decay process from the lowest triplet to the ground state. This underlying RTP mechanism is believed to be very helpful in systematically and comprehensively understanding the aggregation/crystal-induced persistent organic RTP, which has been applied to explain a number of experiments.We then propose the molecular descriptors to characterize the phosphorescence efficiency and lifetime, respectively, derived from fundamental photophysical processes and requirements to obey the El-Sayed rule and generate phosphorescence. For a prototypical RTP system consisting of a carbonyl group and π-conjugated segments, the excited states can be regarded as an admixture of n → π* (with portion α) and π → π* (with portion ß). The intersystem crossing (ISC) rate of S1 → Tn is mostly governed by the modification of the product of α and ß, and the nonradiative rate of T1 → S0 is determined by the ß value of T1. Thus, we employ γ = α × ß and ß to describe the phosphorescence efficiency and lifetime, respectively, which have been successfully applied in the molecular design of efficient and long-lived RTP systems in experiments. The molecular descriptors outlined in this Account, which are easily obtained from simple quantum chemistry calculations, are expected to play important roles in the machine-learning-based molecular screening in the future.

HClO-triggered interventional probe enabled early detection and intervention of atherosclerosis.

Foam cell formation and further accumulation in the subendothelial space of the vascular wall is a hallmark of early atherosclerosis (AS). Targeting foam cell formation can be a promising approach for the early detection and prevention of AS. However, only a few studies have actually examined foam cells in vivo, and most methods combined nanotechnology with angiography, which is complex and could cause further damage to the endothelium. Herein, based on methylene blue, a biosafe NIR dye approved by the FDA, an interventional probe (HMB-NA@Mp) triggered by hypochlorous acid (HClO) was designed for imaging foam cells easily, safely, and effectively in the early stage of AS. Here, encapsulation of the probe by foam cells targeted platelet membrane (Mp) increased probe targeting and reduced toxicity. Cell and animal experimental results showed that the probe could accumulate at the lesion site and significantly enhance fluorescence in the early AS model group. Remarkably, at the same time, it could also release the metabolite niacin, which played a role in inhibiting atherosclerosis. Thus, HMB-NA@Mp is expected to be a powerful means for the early detection and timely intervention of early AS in the absence of clinical symptoms.

Tetradentate Pt(II) Complexes with Peripheral Hindrances for Highly Efficient Solution-Processed Blue Phosphorescent OLEDs.

Two tetradentate Pt(II) complexes with peripheral bulky-group hindrances [Pt(pzpyOczpy-B1) and Pt(pzpyOczpy-B2)] were synthesized and fully investigated for their structural and blue phosphorescent properties. Both X-ray crystallography and computational simulation revealed that bulky substituents incorporated into the C-pyrazolyl and C-pyridinyl positions lie out of the cyclometallated plane, thus alleviating the intramolecular distortions as well as reducing the intermolecular interaction in the solid state. In dichloromethane, their emission peaks at 460 nm with a narrow full width at half-maximum (FWHM) of less than 50 nm, and the photoluminescent quantum yields are over 95% with short decay lifetimes (<5 µs). Solution-processed blue devices are fabricated based on the two complexes. Device A based on Pt(pzpyOczpy-B1) shows excellent electroluminescent performances with the maximum current efficiency, power efficiency, and external quantum efficiency of 47.0 cd/A, 24.6 lm/W, and 22.9%, respectively. The understanding on inert peripheral hindrances provides an effective approach to designing Pt(II) complexes for high-quality blue phosphorescent emitters.

Vibronic Coupling Effect on the Vibrationally Resolved Electronic Spectra and Intersystem Crossing Rates of a TADF Emitter: 7-PhQAD.

Assessing and improving the performance of organic light-emitting diode (OLED) materials require quantitative prediction of rate coefficients for the intersystem crossing (ISC) and reverse ISC (RISC) processes, which are determined not only by the energy gap and the direct spin-orbit coupling (SOC) between the first singlet and triplet excited-states at a thermal equilibrium position of the initial electronic state but also by the non-Condon effects such as the Herzberg-Teller-like vibronic coupling (HTVC) and the spin-vibronic coupling (SVC). Here we apply the time-dependent correlation function approaches to quantitatively calculate the vibrationally resolved absorption and fluorescence spectra and ISC/RISC rates of a newly synthesized multiple-resonance-type (MR-type) thermally activated delayed fluorescence (TADF) emitter, 7-phenylquinolino[3,2,1-de]acridine-5,9-dione (7-PhQAD), with the inclusion of the Franck-Condon (FC), HTVC, and Duschinsky rotation (DR) effects. The SVC effect on the rates has also been approximately evaluated. We find that the experimentally measured ISC rates of 7-PhQAD originate predominantly from the vibronic coupling, consistent with the previous reports on other MR-type TADF emitters. The SVC effect on ISC rates is about 10 times larger than the HTVC effect, and the latter increases the ISC rates by more than 1 order of magnitude while it slightly affects the vibrationally resolved absorption and fluorescence spectra. The discrepancy between the theoretical and experimental results is attributed to inaccurately describing excited-states calculated by the time-dependent density functional theory as well as to not fully accounting for the complex experimental conditions. This work provides a demonstration of what proportion of ISC and RISC rate coefficients of a MR-type TADF emitter can be covered by the HTVC effect, and it opens design routes that go beyond the FC approximation for the future development of high-performance OLED devices.

Optimal Dihedral Angle in Twisted Donor-Acceptor Organic Emitters for Maximized Thermally Activated Delayed Fluorescence.

The twisted donor-acceptor (D-A) organic formwork with a large dihedral angle (θDA ) is usually adopted to narrow the singlet-triplet energy gap for obtaining excellent thermally activated delayed fluorescence (TADF) emitters. However, the dependence of overall TADF properties on θDA has not been systematically investigated to this day. Taking new designed CzBP, CzBP-1M and CzBP-2M via introducing methyl as investigated models, it is found that (i) with increasing θDA , the charge transfer component in S1 is larger than that in T1 in varying degrees, leading to non-monotonic spin-orbit couplings; (ii) the electron-vibration couplings between S1 and T1 states become the largest when θDA approaching 80°, facilitating phonon-driven up-conversion; (iii) the overall TADF rate reaches a peak at θDA ≈80°. By this, the TADF on/off switching is realized via methyl moiety for regulating θDA from theoretical prediction to experimental confirmation. Importantly, the θDA near 80° would be a good descriptor for screening excellent D-A type TADF emitters.