Asymmetric Catalytic Assembly of Triple-Columned and Multilayered Chiral Folding Polymers Showing Aggregation-Induced Emission (AIE).

Unprecedented chiral multilayer folding 3D polymers have been assembled and regulated by uniform and differentiated aromatic chromophore units between naphthyl piers. Screening catalysts, catalytic systems and monomers were proven to be crucial for asymmetric catalytic Suzuki-Miyaura polycouplings for this assembly. X-ray crystallography of the corresponding dimers and trimers revealed the absolute configuration and the intermolecular packing pattern. Up to 61 960 Mw /41 900 Mn and m/z 4317 for polymers and oligomers, as confirmed by gel permeation chromatography (GPC) and MALDI-TOF MS, indicated that these frameworks were composed of multiple stacked layers. The resulting multiple π-assemblies exhibited remarkable optical properties in aggregated states (photoluminescence in solids and aggregation-induced emission in solutions), as well as reversible redox properties in electrochemical performance.

Asymmetric Catalytic Assembly of Triple-Columned and Multilayered Chiral Folding Polymers Showing Aggregation-Induced Emission (AIE).

Invited for the cover of this issue are Guigen Li's groups at Texas Tech University and Nanjing University. The cover artwork shows that chirality patterns exist from universal to molecular levels showing light emission properties. Read the full story of multilayer 3D chirality and its asymmetric catalytic synthesis at 10.1002/chem.202104102.

Asymmetric Catalytic Approach to Multilayer 3D Chirality.

Invited for the cover of this issue is Guigen Li and co-workers at Texas Tech University and Nanjing University. The cover artwork shows that chirality phenomena exists in the universe and in nature, including at micro and molecular levels. Read the full text of the article at 10.1002/chem.202100700.

Asymmetric Catalytic Approach to Multilayer 3D Chirality.

The first asymmetric catalytic approach to multilayer 3D chirality has been achieved by using Suzuki-Miyaura cross-couplings. New chiral catalysts were designed and screened under various catalytic systems that proved chiral amide-phosphines to be more efficient ligands than other candidates. The multilayer 3D framework was unambiguously determined by X-ray structural analysis showing a parallel pattern of three layers consisting of top, middle and bottom aromatic rings. The X-ray structure of a catalyst complex, dichloride complex of Pd-phosphine amide, was obtained revealing an interesting asymmetric environment nearby the Pd metal center. Three rings of multilayer 3D products can be readily changed by varying aromatic ring-anchored starting materials. The resulting multilayer products displayed strong luminescence under UV irradiation and strong aggregation-induced emission (AIE). In the future, this work would benefit not only the field of asymmetric synthesis but also materials science, in particular polarized organic electronics, optoelectronics and photovoltaics.

Hydride ion (H-) transport behavior in barium hydride under high pressure.

Hydride ions (H-) have an appropriate size for fast transport, which makes the conduction of H- attractive. In this work, the H- transport properties of BaH2 have been investigated under pressure using in situ impedance spectroscopy measurements up to 11.2 GPa and density functional theoretical calculations. The H- transport properties, including ionic migration resistance, relaxation frequency, and relative permittivity, change significantly with pressure around 2.3 GPa, which can be attributed to the structural phase transition of BaH2. The ionic migration barrier energy of the P63/mmc phase decreases with pressure, which is responsible for the increased ionic conductivity. A huge dielectric constant at low frequencies is observed, which is related to the polarization of the H- dipoles. The current study establishes general guidelines for developing high-energy storage and conversion devices based on hydride ion transportation.

An immutable array of TiO2 nanotubes to pressures over 30 GPa.

We report the successful formation of an immutable array of α-PbO2 phase TiO2 nanotubes by compression of a TiO2 nanotube array in an anatase phase. During compression to 31.3 GPa, the TiO2 nanotubes started to directly transform from an anatase phase to a baddeleyite phase at 14.5 GPa and completed the transition at 30.1 GPa. Under decompression, the baddeleyite phase transformed to an α-PbO2 phase at 4.6 GPa, which was quenchable to ambient pressure. Notably the tubular array microstructure was retained after the application of ultra high pressure and undergoing a series of phase transformations. Measurements indicated that the nanotubes in the array possessed higher compressibility than in the bulk form. The highly aligned array structure is believed to reinforce the nanotubes themselves, giving exceptional stability. This, as well as the wall thickness, may also account for their different phase transition pathway.

Correlation between the structural change and the electrical transport properties of indium nitride under high pressure.

We report on the intriguing structural and electrical transport properties of compressed InN. Pronounced anomalies of the resistivity, Hall coefficient, electron concentration, and mobility are observed at ∼11.5 GPa, accompanied by a wurtzite-rocksalt structural transition confirmed using high-pressure XRD measurements and first-principles calculations. The pressure-tuned electrical properties of wurtzite and rocksalt InN are also studied, respectively. Particularly, compression pressure significantly decreases the electron concentration of rocksalt InN by two orders of magnitude and increases the mobility by ten fold. The obvious variations in electrical parameters can be rationalized by our band structure simulations, which reveal a direct-indirect energy crossover at 10 GPa, followed by the rapidly increasing patterns of the energy gap with a pressure coefficient of 33 meV GPa-1. Moreover the electron effective mass and energy gap are found to well satisfy with the k·p model. Definite correlation between the structural change and the electrical transport properties should shed a new light on building InN-based applications in the future.

High-pressure dielectric behavior of BaMoO4: a combined experimental and theoretical study.

In situ impedance measurements were employed to investigate the electrical transport properties of BaMoO4 under pressures of up to 20.0 GPa. Two anomalous changes in the electrical parameters were found, related to the pressure-induced structural phase transitions. The dielectric performance of BaMoO4 was improved by pressure. The dispersion in the real part of dielectric constant versus frequency weakens with increasing pressure. Based on the first-principles calculations, the increases of resistance with increasing pressure in the tetragonal and monoclinic phases were mainly caused by the increasing defect levels. The decrease of the relative permittivity in the tetragonal phase was attributed to pressure-induced strengthening in electronic localization around Mo atoms, which hindered the polarization of Mo-O electric dipoles.

Pressure-driven semiconducting-semimetallic transition in SnSe.

In this work, we report the pressure-dependent electrical transport and structural properties of SnSe. In our experiments an electronic transition from a semiconducting to semimetallic state was observed at 12.6 GPa, followed by an orthorhombic to monoclinic structural transition. Hall effect measurements indicate that both the carrier concentration and mobility vary abnormally accompanied by the semimetallic electronic transition. First-principles band structure calculations confirm the semiconducting-semimetallic transition, and reveal that the semimetallic character of SnSe can be attributed to the enhanced coupling of Sn-5s, Sn-5p, and Se-3p orbitals under compression that results in the broadening of energy bands and subsequently the closure of the band gap. The pressure modulated variations of electrical transport and structural properties may provide an approach to improving the thermoelectric properties of SnSe.

Electrical transport properties of AlAs under compression: reversible boundary effect.

Herein, we report on the intriguing electrical transport properties of compressed AlAs. The relative permittivity and the resistances of both the grain and bulk boundaries vary abnormally at ∼10.9 GPa, accompanied by the cubic-hexagonal structural transition of AlAs. With further compression, the boundary effect becomes undistinguished, and subsequently, the electrical transport mechanism converts from boundary- to bulk-dominated, which gives rise to a significant reduction in the total resistance of AlAs. After being quenched to ambient pressure, resistances recover to the initial values followed by the re-emergence of the boundary effect. Eg decreases with pressure and its pressure dependence changes at ∼14.0 GPa, which rationalizes the anomalous variation of the electrical transport properties. The experimental results indicate that the boundary effect can be modulated by compression and increases the resistance difference between the two states. This opens up a new possible basis for optimizing the performance of AlAs-based applications, including multilevel phase-change memories.

Ionic high-pressure form of elemental boron.

Boron is an element of fascinating chemical complexity. Controversies have shrouded this element since its discovery was announced in 1808: the new 'element' turned out to be a compound containing less than 60-70% of boron, and it was not until 1909 that 99% pure boron was obtained. And although we now know of at least 16 polymorphs, the stable phase of boron is not yet experimentally established even at ambient conditions. Boron's complexities arise from frustration: situated between metals and insulators in the periodic table, boron has only three valence electrons, which would favour metallicity, but they are sufficiently localized that insulating states emerge. However, this subtle balance between metallic and insulating states is easily shifted by pressure, temperature and impurities. Here we report the results of high-pressure experiments and ab initio evolutionary crystal structure predictions that explore the structural stability of boron under pressure and, strikingly, reveal a partially ionic high-pressure boron phase. This new phase is stable between 19 and 89 GPa, can be quenched to ambient conditions, and has a hitherto unknown structure (space group Pnnm, 28 atoms in the unit cell) consisting of icosahedral B(12) clusters and B(2) pairs in a NaCl-type arrangement. We find that the ionicity of the phase affects its electronic bandgap, infrared adsorption and dielectric constants, and that it arises from the different electronic properties of the B(2) pairs and B(12) clusters and the resultant charge transfer between them.

Shear-induced phase transition of nanocrystalline hexagonal boron nitride to wurtzitic structure at room temperature and lower pressure.

Disordered structures of boron nitride (BN), graphite, boron carbide (BC), and boron carbon nitride (BCN) systems are considered important precursor materials for synthesis of superhard phases in these systems. However, phase transformation of such materials can be achieved only at extreme pressure-temperature conditions, which is irrelevant to industrial applications. Here, the phase transition from disordered nanocrystalline hexagonal (h)BN to superhard wurtzitic (w)BN was found at room temperature under a pressure of 6.7 GPa after applying large plastic shear in a rotational diamond anvil cell (RDAC) monitored by in situ synchrotron X-ray diffraction (XRD) measurements. However, under hydrostatic compression to 52.8 GPa, the same hBN sample did not transform to wBN but probably underwent a reversible transformation to a high-pressure disordered phase with closed-packed buckled layers. The current phase-transition pressure is the lowest among all reported direct-phase transitions from hBN to wBN at room temperature. Usually, large plastic straining leads to disordering and amorphization; here, in contrast, highly disordered hBN transformed to crystalline wBN. The mechanisms of strain-induced phase transformation and the reasons for such a low transformation pressure are discussed. Our results demonstrate a potential of low pressure-room temperature synthesis of superhard materials under plastic shear from disordered or amorphous precursors. They also open a pathway of phase transformation of nanocrystalline materials and materials with disordered and amorphous structures under extensive shear.

Determination of the phase diagram of water and investigation of the electrical transport properties of ices VI and VII.

The phase diagram of water near the ice VI-ice VII-liquid triple point and electrical transport properties of these ices have been studied by in situ electrical conductivity measurements in a diamond anvil cell. The obtained phase boundary between ices VI and VII and the melting curve for these ices are in accord with most previous results. The different properties and amount of orientational defects in ice VI and ice VII are associated with abrupt changes in conductivity when a phase transition from ice VI to ice VII occurs. The electrical transport mechanisms of these two ice polymorphs can be understood in terms of the conduction of the already existing ions and Bjerrum defects.

Electrical properties and behaviors of cuprous oxide cubes under high pressure.

An accurate in situ electrical resistivity measurement of cuprous oxide cubes has been conducted in a diamond anvil cell at room temperature with pressures up to 25 GPa. The abnormal electrical resistivity variation found at 0.7-2.2 GPa is attributed to the phase transformation from a cubic to a tetragonal structure. Three other discontinuous changes in the electrical resistivity are observed around 8.5, 10.3, and 21.6 GPa, corresponding to the phase transitions from tetragonal to pseudocubic to hexagonal to another hexagonal phase, respectively. The first-principles calculations illustrate that the electrical resistivity decrease of the tetragonal phase is not related to band-gap shrinkage but related to a higher quantity of electrons excited from strain-induced states increasing in band gap with increasing pressure. The results indicate that the Cu(2)O cubes begin to crush at about 15 GPa and completely transform into nanocrystalline at 25 GPa.

Multilayer 3D Chiral Folding Polymers and Their Asymmetric Catalytic Assembly.

A novel class of polymers and oligomers of chiral folding chirality has been designed and synthesized, showing structurally compacted triple-column/multiple-layer frameworks. Both uniformed and differentiated aromatic chromophoric units were successfully constructed between naphthyl piers of this framework. Screening monomers, catalysts, and catalytic systems led to the success of asymmetric catalytic Suzuki-Miyaura polycouplings. Enantio- and diastereochemistry were unambiguously determined by X-ray structural analysis and concurrently by comparison with a similar asymmetric induction by the same catalyst in the asymmetric synthesis of a chiral three-layered product. The resulting chiral polymers exhibit intense fluorescence activity in a solid form and solution under specific wavelength irradiation.

Pressure-Engineered Optical and Charge Transport Properties of Mn2+/Cu2+ Codoped CsPbCl3 Perovskite Nanocrystals via Structural Progression.

In this work, compared with the corresponding pure CsPbCl3 nanocrystals (NCs) and Mn2+-doped CsPbCl3 NCs, Mn2+/Cu2+-codoped CsPbCl3 NCs exhibited improved photoluminescence (PL) and photoluminescence quantum yields (PL QYs) (57.6%), prolonged PL lifetimes (1.78 ms), and enhanced thermal endurance (523 K) as a result of efficient Mn2+ doping (3.66%) induced by the addition of CuCl2. Furthermore, we applied pressure on Mn2+/Cu2+-codoped CsPbCl3 NCs to reveal that a red shift of photoluminescence followed by a blue shift was caused by band gap evolution and related to the structural phase transition from cubic to orthorhombic. Moreover, we also found that under the preheating condition of 523 K, such phase transition exhibited obvious morphological invariance, accompanied by significantly enhanced conductivity. The pressure applied to the products treated with high temperature enlarged the electrical difference and easily intensified the interface by closer packaging. Interestingly, defect-triggered mixed ionic and electronic conducting (MIEC) was observed in annealed NCs when the applied pressure was 2.9 GPa. The pressure-dependent ionic conduction was closely related to local nanocrystal amorphization and increased deviatoric stress, as clearly described by in situ impedance spectra. Finally, retrieved products exhibited better conductivity (improved by 5-6 times) and enhanced photoelectric response than those when pressure was not applied. Our findings not only reveal the pressure-tuned optical and electrical properties via structural progression but also open up the promising exploration of more amorphous all-inorganic CsPbX3-based photoelectric applications.

A high pressure x-ray diffraction study of titanium disulfide.

A high pressure angle dispersive synchrotron x-ray diffraction study of titanium disulfide (TiS(2)) was carried out to pressures of 45.5 GPa in a diamond-anvil cell. We observed a phase transformation of TiS(2) beginning at about 20.7 GPa. The structure of the high pressure phase needs further identification. By fitting the pressure-volume data to the third-order Birch-Murnaghan equation of state, the bulk modulus, K(0T), was determined to be 45.9 ± 0.7 GPa with its pressure derivative, K'(0T), being 9.5 ± 0.3 at pressures lower than 17.8 GPa. It was found that the compression behavior of TiS(2) is anisotropic along the different axes. The compression ratio of the c-axis is about nine times larger than the a-axis when pressures are lower than 1 GPa. It suddenly decreases to three times larger at pressures of about 3 GPa. This ratio shows a linear decrease with a slope of negative 0.048 at pressures below phase transformation.

Tunable photoluminescence and an enhanced photoelectric response of Mn2+-doped CsPbCl3 perovskite nanocrystals via pressure-induced structure evolution.

Mn2+:CsPbCl3 nanocrystals (NCs) were synthesized using a modified one-pot injection method, which exhibits significantly improved thermal stability. For the first time, the pressure-treated optical and structural properties of synthetic Mn2+:CsPbCl3 NCs were further investigated, and their associated intriguing electrical and photoelectric properties were revealed from impedance spectra and photocurrent measurements under compression. The pressure-dependent photoluminescence experienced an initial redshift before 1.7 GPa followed by a continuous blueshift, as evidenced by the bandgap shifts. High-pressure XRD spectra uncovered a cubic-to-orthorhombic structural transition at about 1.1 GPa and subsequent amorphization upon further compression, which was fully reversible. Furthermore, the sample annealing from 340 K drove grain growth and decreased grain boundary resistance at ambient pressure. The compression further decreased the grain boundary barrier and improved the electrical conductivity (up to ∼10-2Ω-1 cm-1) of the thermally annealed Mn2+:CsPbCl3 NC surface. Simultaneous photocurrent enhancement of thermally annealed NCs was also achieved as expected, and reached optimal performance at 0.7 GPa. Strikingly, after the pressure cycling (loading-releasing), the results show that thermally annealed Mn2+:CsPbCl3 NCs gained preservable higher electrical conductivity (∼10 times increase) and an improved photoelectric response compared to the ambient state before compression. This work proves that high pressure is useful for opening the versatility in the structure and properties of metal-halide perovskite nanocrystals leading to a promising way for superior optoelectronic materials-by-design.

Correlation between structural change and electrical transport properties of Fe-doped chrysotile nanotubes under high pressure.

Fe3+ doped chrysotile nanotubes (NTs) have been synthesized under controlled hydrothermal conditions, and have been characteristic of layered-walls and room-temperature ferromagnetism. High-pressure in situ impedance spectra and synchrotron XRD measurements are performed on Fe-doped chrysotile NTs to reveal the electrical transport and structural properties under compression. Sample resistance (R sum) was found to increase with the pressure elevation, accompanying the step decrease in the grain boundary relaxation frequency (f gb), which reflects the bandgap broadening and dipoles polarization weakening due to the application of pressure. Furthermore, it is found that both R sum and f gb change their pressure dependences at ~5.0 GPa, which is attributed to the nonlinear compressibility of c-axis and even the underlying lattice distortion of monoclinic structure obtained in the XRD observations.