Fine mapping of KLW1 that conditions kernel weight mainly through regulating kernel length in wheat (Triticum aestivum L.).

KEY MESSAGE: KLW1 was localized to a 0.6 cM interval near the centromere of chromosome 4B and found to be dominant in conditioning longer kernels and higher kernel weight. Kernel weight is a major wheat yield component and affected by kernel dimensions, filling process and kernel density. Because of this complexity, the mechanism underlying kernel weight is still far from clear. Qtgw.nau-4B or KLW1 was a major kernel weight QTL identified in the Nanda2419 × Wangshuibai population. We showed that introduction of the Nanda2419 allele into elite cultivar Wenmai6 resulted in longer kernels as well as higher kernel weight, without affecting other traits such as spike number per plant, plant height, spike length, spikelet number per spike, and kernel number per spike. KLW1 was dominant in conditioning higher kernel weight and functioned mainly through affecting kernel length. Using F2 plants derived from KLW1 NIL, a high-density genetic map covering the QTL was constructed. KLW1 was consequently confined to the 0.6 cM Xwgrc4219-Xwgrc4067 interval by evaluating the recombinant lines in three field trials. KLW1 is complementary to KT1, the QTL on chromosome 5A of Nanda2419 for thicker and heavier kernels, in producing larger kernels with higher commercial value, augmenting its usefulness in wheat breeding.

FHB resistance conferred by Fhb1 is under inhibitory regulation of two genetic loci in wheat (Triticum aestivum L.).

KEY MESSAGE: Two loci inhibiting Fhb1 resistance to Fusarium head blight were identified through genome-wide association mapping and validated in biparental populations. Fhb1 confers Fusarium head blight (FHB) resistance by limiting fungal spread within spikes in wheat (type II resistance). However, not all lines with Fhb1 display the expected resistance. To identify genetic factors regulating Fhb1 effect, a genome-wide association study for type II resistance was first performed with 72 Fhb1-carrying lines using the Illumina 90 K iSelect SNP chip. Of 84 significant marker-trait associations detected, more than half were repeatedly detected in at least two environments, with the SNPs distributed in one region on chromosome 5B and one on chromosome 6A. This result was validated in a collection of 111 lines with Fhb1 and 301 lines without Fhb1. We found that these two loci caused significant resistance variations solely among lines with Fhb1 by compromising the resistance. In1, the inhibitory gene on chromosome 5B, was in close linkage with Xwgrb3860 in a recombinant inbred line population derived from Nanda2419 × Wangshuibai and a double haploid (DH) population derived from R-43 (Fhb1 near isogenic line) × Biansui7 (with Fhb1 and In1); and In2, the inhibitory gene on chromosome 6A, was mapped to the Xwgrb4113-Xwgrb4034 interval using a DH population derived from R-43 × PH8901 (with Fhb1 and In2). In1 and In2 are present in all wheat-growing areas worldwide. Their frequencies in China's modern cultivars are high but have significantly decreased in comparison with landraces. These findings are of great significance for FHB resistance breeding using Fhb1.

Paclitaxel and Caffeine-Taurine, New Colchicine Alternatives for Chromosomes Doubling in Maize Haploid Breeding.

The doubled haploid (DH) technology is employed worldwide in various crop-breeding programs, especially maize. Still, restoring tassel fertility is measured as one of the major restrictive factors in producing DH lines. Colchicine, nitrous oxide, oryzalin, and amiprophosmethyl are common chromosome-doubling agents that aid in developing viable diploids (2n) from sterile haploids (n). Although colchicine is the most widely used polyploidy-inducing agent, it is highly toxic to mammals and plants. Therefore, there is a dire need to explore natural, non-toxic, or low-toxic cheaper and accessible substitutes with a higher survival and fertility rate. To the best of our knowledge, the advanced usage of human anticancer drugs "Paclitaxel (PTX)" and "Caffeine-Taurine (CAF-T)" for in vivo maize haploids doubling is being disclosed for the first time. These two antimitotic and antimicrotubular agents (PTX and CAF-T) were assessed under various treatment conditions compared to colchicine. As a result, the maximum actual doubling rates (ADR) for PTX versus colchicine in maize haploid seedlings were 42.1% (400 M, 16 h treatment) versus 31.9% (0.5 mM, 24 h treatment), respectively. In addition, the ADR in maize haploid seeds were CAF-T 20.0% (caffeine 2 g/L + taurine 12 g/L, 16 h), PTX 19.9% (100 µM, 24 h treatment), and colchicine 26.0% (2.0 mM, 8 h treatment). Moreover, the morphological and physiological by-effects in haploid plants by PTX were significantly lower than colchicine. Hence, PTX and CAF-T are better alternatives than the widely used traditional colchicine to improve chromosome-doubling in maize crop.

A semi-dominant NLR allele causes whole-seedling necrosis in wheat.

Programmed cell death (PCD) and apoptosis have key functions in development and disease resistance in diverse organisms; however, the induction of necrosis remains poorly understood. Here, we identified a semi-dominant mutant allele that causes the necrotic death of the entire seedling (DES) of wheat (Triticum aestivum L.) in the absence of any pathogen or external stimulus. Positional cloning of the lethal allele mDES1 revealed that this premature death via necrosis was caused by a point mutation from Asp to Asn at amino acid 441 in a nucleotide-binding leucine-rich repeat protein containing nucleotide-binding domain and leucine-rich repeats. The overexpression of mDES1 triggered necrosis and PCD in transgenic plants. However, transgenic wheat harboring truncated wild-type DES1 proteins produced through gene editing that exhibited no significant developmental defects. The point mutation in mDES1 did not cause changes in this protein in the oligomeric state, but mDES1 failed to interact with replication protein A leading to abnormal mitotic cell division. DES1 is an ortholog of Sr35, which recognizes a Puccinia graminis f. sp. tritici stem rust disease effector in wheat, but mDES1 gained function as a direct inducer of plant death. These findings shed light on the intersection of necrosis, apoptosis, and autoimmunity in plants.

Fine mapping KT1 on wheat chromosome 5A that conditions kernel dimensions and grain weight.

KEY MESSAGE: KT1 was validated as a novel thickness QTL with major effects on wheat kernel dimensions and weight and fine mapped to a 0.04 cM interval near the chromosome-5A centromere. Kernel size, the principal grain weight determining factor of wheat and a target trait for both domestication and artificial breeding, is mainly defined by kernel length (KL), kernel width (KW) and kernel thickness (KT), of which KW and KT have been shown to be positively related to grain weight (GW). Qkt.nau-5A, a major QTL for KT, was validated using the QTL near-isogenic lines (NILs) in three genetic backgrounds. Genetic analysis using two F2 populations derived from the NILs showed that Qkt.nau-5A was dominant for thicker kernel and inherited like a single gene and therefore was designated as Kernel Thickness 1 (KT1). With 77 recombinant lines identified from a total of 19,160 F2 plants from the two NIL-derived F2 populations, KT1 was mapped to the 0.04 cM Xwgrb1356-Xwgrb1619 interval, which was near the centromere and displayed strong recombination suppression. The KT1 interval showed positive correlation with KW and GW and negative correlation with KL and therefore could be used in breeding for cultivars with round-shaped kernels that are beneficial to higher flour yield. KT1 candidate identification could be achieved through combination of sequence variation analysis with expression profiling of the annotated genes in the interval.

Fine mapping of Ne1, the hybrid necrosis gene complementary to Ne2 in common wheat (Triticum aestivum L.).

KEY MESSAGE: Apart from confinement of Ne1 to a 4.45 Mb genomic segment, markers closely linked to Ne2 were identified and incomplete dominance of both genes in conditioning necrosis severity was shown. Hybrid necrosis in plants is characterized by premature death of leaves or plants in F1 hybrids. Interaction of two complementary dominant genes Ne1 and Ne2 in wheat (Triticum aestivum L.) is known to cause hybrid necrosis. However, the mechanism underlying this necrosis is still elusive. To obtain markers closely-linked to these two genes, Ne1-carrying cultivar Zheng891 was crossed with Ne2-carrying cultivar Pan555. Using BC1F1 plants derived from crosses of the F1 plants with the two parental lines, Ne1 and Ne2 were mapped to a 2.2 cM interval and a 2.3 cM interval with newly developed markers, respectively. Ne1 was further delimited to a 0.19 cM interval using 2015 Ne2-carrying F2 plants. Xwgrc3146, Xwgrc3147 and Xwgrc3150, three of the four markers co-segregating with Ne1, were all Zheng891-dominant, suggesting that, compared with Pan555, Ne1 is located in a region with substantial sequence diversity. The Ne1 interval is syntenic to chromosomes 5H, 4, 9 and 2 of barley, Brachypodium distachyon, rice and sorghum, respectively, and corresponds to a 4.45 Mb Chinese Spring sequence. Variations in necrosis severity of the F2 plants differing in Ne1 and Ne2 genotypes implied that these two genes are incompletely dominant in determining the timing and severity of necrosis.

Genetic control of Fusarium head blight resistance in two Yangmai 158-derived recombinant inbred line populations.

KEY MESSAGE: Stably expressed type I and type II resistance QTL were identified using two Yangmai 158-derived RIL populations, and plant-height and flowering-time QTL intervals detected did not contribute to the FHB resistance variations. Yangmai 158 (Y158) is an elite wheat cultivar widely grown in China with stable Fusarium head blight (FHB) resistance. To enrich the genetic basis underlying FHB resistance, QTL mapping was conducted using two recombinant inbred line (RIL) populations derived from crosses of Y158 with susceptible lines Annong 8455 and Veery. Survey with makers linked to Fhb1, Fhb2, Fhb4 and Fhb5 in resistance cultivar Wangshuibai indicated that both Y158 and the susceptible lines do not contain these QTL. The RIL populations were surveyed with 65 PCR markers and 55 K chip, which generated 23,159 valid marker data, to produce genetic maps for whole genome scanning of quantitative trait loci (QTL). A total of six QTL, all with the Y158 alleles for better resistance and including one stably expressed QTL for type I resistance (Qfhi.nau-2D) and one stably expressed QTL for type II resistance (Qfhs.nau-2A), were identified. Moreover, taking advantage of the great genetic variations in plant height and flowering time, QTL conditioning these two traits were determined. Of six plant-height QTL and three flowering-time QTL intervals detected, none were associated with FHB resistance. The FHB resistance QTL in Y158 were shown to be useful alternatives in FHB resistance breeding programs. The SNP markers flanking Qfhs.nau-2A and Qfhi.nau-2D have been converted to breeder-friendly PCR-based markers to facilitate their applications.

Identification, characterization and expression analysis of lineage-specific genes within Triticeae.

Lineage-specific genes (LSGs) are a set of genes in a given taxon without significant sequence similarity to genes and intergenic sequences of other taxa and are functional. The tribe Triticeae mainly includes species of different ploidy levels, such as staple food crops wheat (Triticum aestivum L.) and barley (Hordeum vulgare L.). This study is aimed at mining and characterizing the Triticeae-specific genes (TSGs) using expressed sequence data of wheat. A total of 3812 TSGs was identified and they were generally characterized by smaller size, fewer exons, shorter open reading frames and lower expression levels. Most TSGs were expressed with tissue preference and many of them were predominantly expressed in reproduction related tissues, especially in young stamen. Nearly one third of the TSGs were stress-responsive and inducible under abiotic and/or biotic stresses. A co-expression-based annotation supported the relevance of some TSGs with reproduction and stress responses, indicating their potential economic importance.

A Rapid Pipeline for Pollen- and Anther-Specific Gene Discovery Based on Transcriptome Profiling Analysis of Maize Tissues.

Recently, crop breeders have widely adopted a new biotechnology-based process, termed Seed Production Technology (SPT), to produce hybrid varieties. The SPT does not produce nuclear male-sterile lines, and instead utilizes transgenic SPT maintainer lines to pollinate male-sterile plants for propagation of nuclear-recessive male-sterile lines. A late-stage pollen-specific promoter is an essential component of the pollen-inactivating cassette used by the SPT maintainers. While a number of plant pollen-specific promoters have been reported so far, their usefulness in SPT has remained limited. To increase the repertoire of pollen-specific promoters for the maize community, we conducted a comprehensive comparative analysis of transcriptome profiles of mature pollen and mature anthers against other tissue types. We found that maize pollen has much less expressed genes (>1 FPKM) than other tissue types, but the pollen grain has a large set of distinct genes, called pollen-specific genes, which are exclusively or much higher (100 folds) expressed in pollen than other tissue types. Utilizing transcript abundance and correlation coefficient analysis, 1215 mature pollen-specific (MPS) genes and 1009 mature anther-specific (MAS) genes were identified in B73 transcriptome. These two gene sets had similar GO term and KEGG pathway enrichment patterns, indicating that their members share similar functions in the maize reproductive process. Of the genes, 623 were shared between the two sets, called mature anther- and pollen-specific (MAPS) genes, which represent the late-stage pollen-specific genes of the maize genome. Functional annotation analysis of MAPS showed that 447 MAPS genes (71.7% of MAPS) belonged to genes encoding pollen allergen protein. Their 2-kb promoters were analyzed for cis-element enrichment and six well-known pollen-specific cis-elements (AGAAA, TCCACCA, TGTGGTT, [TA]AAAG, AAATGA, and TTTCT) were found highly enriched in the promoters of MAPS. Interestingly, JA-responsive cis-element GCC box (GCCGCC) and ABA-responsive cis-element-coupling element1 (ABRE-CE1, CCACC) were also found enriched in the MAPS promoters, indicating that JA and ABA signaling likely regulate pollen-specific MAPS expression. This study describes a robust and straightforward pipeline to discover pollen-specific promotes from publicly available data while providing maize breeders and the maize industry a number of late-stage (mature) pollen-specific promoters for use in SPT for hybrid breeding and seed production.

Germplasms, genetics and genomics for better control of disastrous wheat Fusarium head blight.

Fusarium head blight (FHB), or scab, for its devastating nature to wheat production and food security, has stimulated worldwide attention. Multidisciplinary efforts have been made to fight against FHB for a long time, but the great progress has been achieved only in the genomics era of the past 20 years, particularly in the areas of resistance gene/QTL discovery, resistance mechanism elucidation and molecular breeding for better resistance. This review includes the following nine main sections, (1) FHB incidence, epidemic and impact, (2) causal Fusarium species, distribution and virulence, (3) types of host resistance to FHB, (4) germplasm exploitation for FHB resistance, (5) genetic control of FHB resistance, (6) fine mapping of Fhb1, Fhb2, Fhb4 and Fhb5, (7) cloning of Fhb1, (8) omics-based gene discovery and resistance mechanism study and (9) breeding for better FHB resistance. The advancements that have been made are outstanding and exciting; however, judged by the complicated nature of resistance to hemi-biotrophic pathogens like Fusarium species and lack of immune germplasm, it is still a long way to go to overcome FHB.

HL2 on chromosome 7D of wheat (Triticum aestivum L.) regulates both head length and spikelet number.

KEY MESSAGE: A major QTL QSpl.nau-7D, named HL2, was validated for its effects on head length and kernel number per spike using NIL, and mapped to a 0.2 cM interval using recombinants. Improvement in wheat inflorescence traits such as spike or head length and spikelet number provides an important avenue to increase grain yield potential. In a previous study, QSpl.nau-7D, the major QTL for head length on chromosome 7D, was identified in the recombinant inbred lines derived from Nanda2419 and Wangshuibai. To validate and precisely map this QTL, the Wangshuibai allele was transferred to elite cultivar Yangmai15 through marker-assisted selection. Compared with the recurrent parent, the resultant near-isogenic line (NIL) yielded not only 28% longer spikes on the average but also more spikelets and kernels per spike. Moreover, the NIL had a lower spikelet density and did not show significant kernel weight change. In the F2 population derived from the NIL, QSpl.nau-7D acted like a single semi-dominant gene controlling head length and was therefore designated as Head Length 2 (HL2). With this population, a high-density genetic map was constructed mainly using newly developed markers, and 100 homozygous recombinants including 17 genotypes were obtained. Field experiments showed that the recombinants carrying the 0.2-cM interval flanked by Xwgrb1588 and Xwgrb1902 from Wangshuibai produced longer spikes than those without this Wangshuibai allele. Comparative mapping of this interval revealed a conserved synteny among cereal grasses. HL2 is beneficial to wheat breeding for more kernels per spike at a lower spikelet density, which is a favored morphological trait for Fusarium head blight resistance.

Pleiotropic effects of the wheat domestication gene Q on yield and grain morphology.

MAIN CONCLUSION: Transformation from q to Q during wheat domestication functioned outside the boundary of threshability to increase yield, grains m-2, grain weight and roundness, but to reduce grains per spike/spikelet. Mutation of the Q gene, well-known affecting wheat spike structure, represents a key domestication step in the formation of today's free-threshing, economically important wheats. In a previous study, multiple yield components and spike characteristics were associated with the Q gene interval in the bread wheat 'Forno' × European spelt 'Oberkulmer' recombinant inbred line population. Here, we reported that this interval was also associated with grain yield, grains m-2, grain morphology, and spike dry weight at anthesis. To clarify the roles of Q in agronomic trait performance, a functional marker for the Q gene was developed. Analysis of allelic effects showed that the bread wheat Q allele conferred free-threshing habit, soft glumes, and short and compact spikes compared with q. In addition, the Q allele contributed to higher grain yield, more grains m-2, and higher thousand grain weight, whereas q contributed to more grains per spike/spikelet likely resulting from increased preanthesis spike growth. For grain morphology, the Q allele was associated with reduced ratio of grain length to height, indicating a rounder grain. These results are supported by analysis of four Q mutant lines in the Chinese Spring background. Therefore, the transition from q to Q during wheat domestication had profound effects on grain yield and grain shape evolution as well, being a consequence of pleiotropy.

Fine mapping of powdery mildew resistance gene Pm4e in bread wheat (Triticum aestivum L.).

MAIN CONCLUSION: Fine mapping of wheat powdery mildew-resistance gene Pm4e to a 0.19 cM interval with sequence-based markers provides the foundation for map-based cloning and marker-assisted selection with breeder-friendly markers. Powdery mildew caused by Blumeria graminis f. sp. tritici is a wheat foliar disease that poses a serious threat to global wheat production. Pm4 is a resistance gene locus that has played a key role in controlling this disease in wheat production and a few resistance alleles of this locus have been identified. We have previously mapped the Pm4e allele to a 6.7 cM interval on chromosome 2AL. In this study, Pm4e was delimited to a 0.19 cM interval flanked by Xwgrc763 and Xwgrc865, through employment of a larger segregating population, derived from the cross of resistant parent D29 with susceptible parent Yangmai 158 (Y158), and enrichment of the genetic interval with markers developed on Chinese Spring (C.S.) survey sequence. In this interval, Pm4e co-segregated with a few markers, some of which were either D29-dominant or Y158-dominant, implying great sequence variation in the interval between D29 and Y158. Most of these co-segregation markers could not differentiate the Pm4 alleles from each other. Survey of 55 wheat cultivars with four co-dominant markers showed that the Pm4e-co-segregating loci always co-exist. Annotation of the Pm4e interval-corresponding C.S. sequence revealed more than a dozen resistance gene analogs clustered in a 2.4 Mb region, although C.S. is susceptible to the Pm4e-avirulent isolate Bgt2. This study has established the foundation for map-based cloning of Pm4e. Moreover, some of the co-dominant markers developed in this study could help in marker-assisted transfer of Pm4e into elite cultivars.

Correction to: Fine mapping of powdery mildew resistance gene Pm4e in bread wheat (Triticum aestivum L.).

Unfortunately, the style of the units was incorrectly published ("cm" instead of "cM") throughout the original article.

Mapping QTLs controlling kernel dimensions in a wheat inter-varietal RIL mapping population.

KEY MESSAGE: Seven kernel dimension QTLs were identified in wheat, and kernel thickness was found to be the most important dimension for grain weight improvement. Kernel morphology and weight of wheat (Triticum aestivum L.) affect both yield and quality; however, the genetic basis of these traits and their interactions has not been fully understood. In this study, to investigate the genetic factors affecting kernel morphology and the association of kernel morphology traits with kernel weight, kernel length (KL), width (KW) and thickness (KT) were evaluated, together with hundred-grain weight (HGW), in a recombinant inbred line population derived from Nanda2419 × Wangshuibai, with data from five trials (two different locations over 3 years). The results showed that HGW was more closely correlated with KT and KW than with KL. A whole genome scan revealed four QTLs for KL, one for KW and two for KT, distributed on five different chromosomes. Of them, QKl.nau-2D for KL, and QKt.nau-4B and QKt.nau-5A for KT were newly identified major QTLs for the respective traits, explaining up to 32.6 and 41.5% of the phenotypic variations, respectively. Increase of KW and KT and reduction of KL/KT and KW/KT ratios always resulted in significant higher grain weight. Lines combining the Nanda 2419 alleles of the 4B and 5A intervals had wider, thicker, rounder kernels and a 14% higher grain weight in the genotype-based analysis. A strong, negative linear relationship of the KW/KT ratio with grain weight was observed. It thus appears that kernel thickness is the most important kernel dimension factor in wheat improvement for higher yield. Mapping and marker identification of the kernel dimension-related QTLs definitely help realize the breeding goals.

Photonic crystal bandedge membrane lasers on silicon.

We report here the design and experimental demonstration of optically pumped photonic crystal bandedge membrane lasers on silicon-on-insulator (SOI) and on bulk silicon (Si) substrates, based on heterogeneously integrated InGaAsP multi-quantum-well membrane layers transfer printed onto patterned photonic crystal cavities. Single-mode lasing under room-temperature operation was observed at 1542 nm, with excellent side mode suppression ratio greater than 31.5 dB, for the laser built on SOI substrate. For the laser built on bulk Si substrate, single-mode lasing was also achieved at 1452 nm with much lower thermal resistance, as compared to that of the laser built on SOI substrates. Such improved thermal characteristics are favorable for lasers operating potentially at higher temperatures and higher power.

Characterization of three wheat grain weight QTLs that differentially affect kernel dimensions.

KEY MESSAGE: The QGw.nau - 2D, QGw.nau - 4B and QGw.nau - 5A intervals were investigated for their effects on weight, length, width, and thickness of kernels and their differential roles in determining kernel size and shape were demonstrated. Grain weight (GW) contributes greatly to wheat yield and is directly related to kernel size and shape. Although over 100 quantitative trait loci (QTLs) for GW have been reported in the literatures, few have been well characterized for their association with kernel traits. In this study, three GW QTLs identified in elite cultivar 'Nanda2419' ('Mentana'), including QGw.nau-2D, QGw.nau-4B and QGw.nau-5A, were investigated through near isogenic line (NIL) development and evaluation. NILs for all three QTLs and one NIL with both QGw.nau-4B and QGw.nau-5A were developed with the help of marker-assisted selection after two to three generations of backcross using cultivar 'Wangshuibai' as the recurrent parent. One NIL with QGw.nau-4B in the background of cultivar 'Wenmai6' was also obtained. In four different field trials, these NILs consistently produced heavier kernels than the recurrent parents. QGw.nau-4B showed the largest effect on GW; its presence resulted in 0.4-0.5 g increase of hundred-grain weight, depending on genetic backgrounds. QGw.nau-4B and QGw.nau-5A functioned additively in conditioning GW. These three QTL intervals showed pleiotropic effects on, or close linkage with genes for, spike length, plant height and flag leaf width, respectively, and acted differentially in determining the kernel dimensions that are the major GW determinants. They all conditioned wider kernels with QGw.nau-5A displaying the largest effect. QGw.nau-4B and QGw.nau-5A also conditioned thicker kernels but had opposite effects on kernel length. This study demonstrated that marker-assisted selection is effective for GW improvement. The availability of GW NILs could facilitate cloning of GW genes and unraveling of kernel development mechanisms.

A haplotype block associated with thousand-kernel weight on chromosome 5DS in common wheat (Triticum aestivum L.).

Spike number per unit area, number of grains per spike, and thousand-kernel weight (TKW) are important yield components for wheat (Triticum aestivum L.). TKW has the highest heritability among the three components. We validated 27 simple sequence repeat (SSR) loci associated with TKW in an F(2:5) breeding population grown in four environments. A cfd7(8265bp) marker on chromosome 5DS showed the strongest association with TKW and had a significantly positive effect on TKW compared to allele cfd7(8259bp), with mean increases of 5.17, 3.63, 4.11, and 5.16 g in the four environments. Markers cfd67 and cfd40 flanking cfd78 also showed significantly positive associations with TKW with increases of 5.11, 3.29, 4.31, and 4.50 g for cfd67(205), and 4.98, 3.49, 4.06, and 4.84 g for cfd40(187) compared with cfd67(203) and cfd40(190) in the four environments, respectively. A major quantitative trait locus for TKW spanning 2.94 cM on chromosome 5DS was detected by association mapping. Strong linkage disequilibrium (LD) (r(2) > 0.2) was detected among the three linked markers, which formed three haplotype blocks in the F(2:5) breeding population. Mean TKW differences between HapB-I and HapB-II were 5.80, 4.41, 4.02, and 5.06 g in the four environments, respectively. Moreover, significant LD was detected only between cfd78 and cfd67 and between cfd67 and cfd40 in a germplasm collection. This study provides a base for cloning genes related to TKW on chromosome 5DS.

Homologous haplotypes, expression, genetic effects and geographic distribution of the wheat yield gene TaGW2.

BACKGROUND: TaGW2-6A, cloned in earlier research, strongly influences wheat grain width and TKW. Here, we mainly analyzed haplotypes of TaGW2-6B and their effects on TKW and interaction with haplotypes at TaGW2-6A. RESULTS: About 2.9 kb of the promoter sequences of TaGW2-6B and TaGW2-6D were cloned in 34 bread wheat cultivars. Eleven SNPs were detected in the promoter region of TaGW2-6B, forming 4 haplotypes, but no divergence was detected in the TaGW2-6D promoter or coding region. Three molecular markers including CAPS, dCAPS and ACAS, were developed to distinguish the TaGW2-6B haplotypes. Haplotype association analysis indicated that TaGW2-6B has a stronger influence than TaGW2-6A on TKW, and Hap-6B-1 was a favored haplotype increasing grain width and weight that had undergone strong positive selection in global wheat breeding. However, clear geographic distribution differences for TaGW2-6A haplotypes were found; Hap-6A-A was favored in Chinese, Australian and Russian cultivars, whereas Hap-6A-G was preferred in European, American and CIMMYT cultivars. This difference might be caused by a flowering and maturity time difference between the two haplotypes. Hap-6A-A is the earlier type. Haplotype interaction analysis between TaGW2-6A and TaGW2-6B showed additive effects between the favored haplotypes. Hap-6A-A/Hap-6B-1 was the best combination to increase TKW. Relative expression analysis of the three TaGW2 homoeologous genes in 22 cultivars revealed that TaGW2-6A underwent the highest expression. TaGW2-6D was the least expressed during grain development and TaGW2-6B was intermediate. Diversity of the three genes was negatively correlated with their effect on TKW. CONCLUSIONS: Genetic effects, expression patterns and historic changes of haplotypes at three homoeologous genes of TaGW2 influencing yield were dissected in wheat cultivars. Strong and constant selection to favored haplotypes has been found in global wheat breeding during the past century. This research also provides a valuable case for understanding interaction of genes that control complex traits in polyploid species.

Construction and characterization of three wheat bacterial artificial chromosome libraries.

We have constructed three bacterial artificial chromosome (BAC) libraries of wheat cultivar Triticum aestivum Wangshuibai, germplasms T. monococcum TA2026 and TA2033. A total of 1,233,792,170,880 and 263,040 clones were picked and arrayed in 384-well plates. On the basis of genome sizes of 16.8 Gb for hexaploid wheat and 5.6 Gb for diploid wheat, the three libraries represented 9.05-, 2.60-, and 3.71-fold coverage of the haploid genomes, respectively. An improved descending pooling system for BAC libraries screening was established. This improved strategy can save 80% of the time and 68% of polymerase chain reaction (PCR) with the same successful rate as the universal 6D pooling strategy.