The addition of respiratory muscle strength training to facilitate swallow and pulmonary rehabilitation following massive tissue loss and severe deconditioning: A case series.

INTRODUCTION: Impaired respiratory and swallow function in patients with intensive care unit-acquired deconditioning, such as associated with massive tissue loss, is not uncommon and can require prolonged rehabilitation. AIM: The aim of the study was to examine the effect of combined inspiratory and expiratory respiratory muscle strength training (RMST) on respiratory and swallow function in two critical care patients with marked deconditioning after massive tissue loss. METHODS: Case 1 was a 19-year-old male patient with 80% body surface area burns; case 2 was a 45-year-old man with group A streptococcus myositis necessitating quadruple amputation. Both required prolonged intensive care and mechanical ventilation. Both received routine intensive pulmonary and swallow rehabilitation before the trial; however, chronic aspiration and poor secretion clearance remained. At 25 and 26 weeks after initial injury, RMST was performed using EMST150 (expiratory) and Threshold IMT (inspiratory) devices, respectively. At baseline and throughout treatment, data collected included peak expiratory flow (PEF), anthropometry measures, aspiration risk (Penetration-Aspiration Scale [PAS]), pharyngeal clearance (Yale Pharyngeal Residue Scale), secretions (New Zealand Secretion Scale [NZSS]), and functional diet (Functional Oral Intake Scale [FOIS]) via endoscopy. RESULTS/DISCUSSION: At baseline, the PEF score of case 1 was 41% (predicted age-height norm) and the PEF score of case 2 was 14%, indicating severe expiratory compromise. Both had extreme energy requirements (3300 kcal/day; 3500 kcal/day). The baseline swallowing scores of case 1 and 2 were as follows: PAS, 8 and 8; Yale, 9 and 10; NZSS, 4 and 7; and FOIS, 1 and 1, respectively, indicating profound dysphagia. At week 3 of 7 of RMST, swallow function improved to allow both to commence oral intake, followed by tracheostomy decannulation. At weeks 10 and 11, full dysphagia resolution was achieved (FOIS = 7; PAS = 1, Yale = 2, NZSS = 0), with PEF at 70% and 48% predicted respectively. Both patients continued RMST, and at discharge from the acute facility, PEF was 84% and 80% predicted respectively. CONCLUSION: The addition of RMST assisted swallow and pulmonary rehabilitation in both cases and was clinically viable to deliver. Controlled validation trials are now required.

Influence of Inhalation Injury on Incidence, Clinical Profile and Recovery Pattern of Dysphagia Following Burn Injury.

Inhalation injury is predictive of dysphagia post burns; however, the nature of dysphagia associated with inhalation burns is not well understood. This study describes the clinical profile and recovery pattern of swallowing following inhalation burn injury. All patients admitted 2008-2017 with confirmed inhalation burns on laryngoscopy and managed by speech-language pathology (SLP) were included. Initial dysphagia presentation and dysphagia recovery pattern were documented using the FOIS. Co-presence of dysphonia was determined clinically and rated present/absent. Persistent laryngeal/pharyngeal injury at 6 months was documented using laryngoscopy. Data were compared to published data from a large adult burn cohort. All patients with confirmed inhalation burns during the study period received SLP input, enabling review of 38 patients (68% male; m = 40.8 years). Percent Total Body Surface Area burn ranged 1-90%, 100% had head and neck burns, 97% required mechanical ventilation (mean 9.4 days), 18% required tracheostomy and 100% had dysphonia. Comparing to non-inhalation burn patients, the inhalation cohort had significantly (p < 0.01) higher dysphagia incidence (89.47% vs 5.6%); more with severe dysphagia at presentation (78.9% vs 1.7%); increased duration to initiate oral intake (m = 24.69 vs 0.089 days); longer duration of enteral feeding (m = 45.03 vs 1.96 days); and longer duration to resolution of dysphagia (m = 29.79 vs 1.67 days). Persistent laryngeal pathology was present in 47.37% at 6 months. This study shows dysphagia incidence in burn patients with inhalation injury is 16 times greater than for those without inhalation injury. Laryngeal pathology due to inhalation injury increases dysphagia severity and duration to dysphagia recovery.

Full thickness facial burns: Outcomes following orofacial rehabilitation.

PURPOSE: To document orofacial rehabilitation and outcomes after full thickness orofacial burn. METHODS: Participants included 12 consecutive patients presenting with full thickness orofacial burns. A group of 120 age-matched healthy participants was recruited for normative comparison. Non-surgical exercise was initiated within 48 h of admission and continued until wounds had healed, circumoral scar tissue had stabilised and functional goals were achieved to the best of the patient's ability. Outcomes were documented using vertical and horizontal mouth opening measures at start and end of treatment and therapy duration was recorded. RESULTS: At commencement of treatment, participants had significantly (p<0.001) reduced vertical and horizontal mouth opening range compared to controls. Average duration of orofacial contracture management was 550 days, with half requiring >2 years rehabilitation. By end of treatment, significant (p<0.01) positive improvement in vertical and horizontal mouth opening had been achieved, however measures had returned to lower limits of normal function and remained significantly (p<0.05) reduced compared to the control group. CONCLUSION: This study demonstrates that although positive gains can be achieved through non-surgical exercise after full thickness burn, the duration of rehabilitation is considerable and some degree of long term loss in functional mouth opening remains.

Orofacial contracture management outcomes following partial thickness facial burns.

PURPOSE: To examine clinical outcomes following non-surgical exercise for contracture management post partial thickness orofacial burn. METHODS: A cohort of 229 patients with partial thickness orofacial burn was recruited over 3 years. Orofacial contracture management combining exercise and stretching was initiated within 48h of admission and continued until functional goals were consistently achieved. A second cohort of 120 healthy controls was recruited for normative comparison. Vertical and horizontal mouth opening measures were recorded at the start and completion of orofacial intervention for patients and once only for controls. RESULTS: At commencement of intervention, participants with orofacial burns had significantly (p<0.001) reduced vertical and horizontal mouth opening. Treatment duration averaged 30.7 days (SD=52.3). Post treatment significant (p<0.001) improvements in vertical and horizontal opening were noted. At treatment conclusion, a significant (p<0.01) difference remained between the burns cohort and control group for vertical mouth opening, though horizontal mouth opening was now statistically comparable to the controls. CONCLUSION: This study supports positive outcomes following orofacial contracture management for patients with partial thickness orofacial burn. Despite this, some functional loss remained with patients demonstrating persistent reduced vertical mouth opening at conclusion of treatment compared to their healthy counterparts.

Pharmacodynamics of mivacurium in severely burned patients.

The pharmacodynamics of mivacurium, a new short-acting non-depolarizing muscle relaxant, were studied in nine severely burned patients with concomitant inhalation injury. Complete neuromuscular blockade was achieved within 1.3 min (controls 3.0 min) following the usually recommended intubating dose (0.15 mg/kg/BW 2 x ED95) of mivacurium. The clinical duration of neuromuscular blockade and the recovery times were slightly prolonged, due to significantly reduced serum cholinesterase activity (clinical duration 24.6 min vs. 15.3 min). This pharmacodynamic profile makes mivacurium preferable for intermittent on-demand neuromuscular blockade in the severely burned patient.

Sutureless microvascular anastomoses by a biodegradable laser-activated solid protein solder.

A new sutureless technique to successfully anastomose the abdominal aorta of rats (1.3 mm in diameter) by using a fully biodegradable, laser-activated protein solder is presented. A total of 90 rats were divided into two groups randomly. In group one, the anastomoses were performed by using conventional microsuturing technique, whereas in group two, the anastomoses were performed by using a new laser welding technique. In addition, each of the two groups were divided into five subgroups and evaluated at different follow-up periods (10 minutes, 1 hour, 1 day, 1 week, and 6 weeks). At these intervals, the anastomoses were evaluated for patency and tensile strength. Three anastomoses in each subgroup were processed for light and electron microscopy. All anastomoses were found to be patent. The mean clamp time of the anastomoses performed with conventional suturing was 20.6 minutes compared with 7.2 minutes for the laser-activated welded anastomoses (p < 0.001). The strain measurements showed a stronger mechanical bond of the sutured anastomoses in the initial phase. However, at 6 weeks the tensile strength of the laser-welded anastomoses was higher compared with the conventional suture technique. Histologic evaluations revealed a near complete resorption of the solder after 6 weeks. The junction site of the vessel ends cannot be determined on the luminal side of the artery. In conclusion, a resorbable protein used as a solder, activated by a diode laser, can provide a reliable, safe, and rapid arterial anastomosis, which could be performed by any microsurgeon faster than conventional suturing after a short learning curve.

[Analysis of hand function with the Millesi examination scale in patients with pollicisation after aplasia or hypoplasia of the thumb]. / Handfunktionsanalyse mit dem Untersuchungsschema nach Millesi bei Patienten mit Pollizisation nach Aplasie oder Hypoplasie des Daumens.

Pollicisation of a single long finger is the method of choice to treat congenital thumb aplasia or thumb hypoplasia. Using Millesi's scale for the functional analysis of the hand, we examined six patients treated in the years 1983 to 1994 in our service. Average age at the time of surgery was 2.4 years and the follow-up time was seven years on average. Of the six patients, four suffered from additional malformations of the ipsilateral arm. These anomalies required early surgical treatment and therefore delayed the pollicisation procedure. The results of the anatomical part of the examination ranged between 39 and 94% of the achievable value. The final results including sensibility, strength, and skills reached 11 to 50%. Development of skills and muscle strength in the operated hand was dependent on the follow-up time. Millesi's scale could be applied successfully in this special group of children with congenital malformation of hands.

The severe burns patient with tracheostomy: implications for management of dysphagia, dysphonia and laryngotracheal pathology.

INTRODUCTION: Insertion of a tracheostomy for a severe burn patient is not uncommon. The method of decannulation, effects of the tracheostomy on voice and swallowing and subsequent complications have not been described in the literature specifically for this population. The aim of this study was to investigate the risk of dysphagia, dysphonia and laryngotracheal pathology in severe burn patients with tracheostomy and following decannulation. METHOD: A retrospective chart review was conducted for severe burn patients admitted from January 2000 to December 2007 that received tracheostomy as part of their treatment. RESULTS: Two hundred and thirty patients were admitted during the study period, 26 of whom underwent tracheostomy. Significant positive correlations were identified between tracheostomy duration and %TBSA burn, days to commence oral intake and days to commence pre-morbid oral diet. Several dysphagic features were identified within the oral and pharyngeal phases of swallowing and dysphonia was frequently demonstrated on perceptual voice assessment with the tracheostomy in situ and following decannulation. Laryngotracheal pathology was diagnosed in 12 of the 26 patients (46.2%) whilst the tracheostomy was in place; 2 with laryngeal granulation tissue, 2 with tracheal granulation tissue, 2 with supraglottic oedema and erythema and 6 with reduced vocal mobility. CONCLUSION: Severe burn patients that have prolonged tracheostomy are likely to have a larger size burn, take longer to commence oral intake and achieve pre-morbid oral diet. These patients are also at risk for dysphagia, dysphonia and laryngotracheal pathology.

Adult burn injuries due to domestic barbeques in New South Wales.

PURPOSE: Burn injuries associated with domestic barbeques were responsible for 80 admissions to Concord Hospital Burns Unit during the period from January 1998 until December 2007. In our series the number of burn injuries associated with domestic barbeques is increasing and we have reviewed the records of these patients to document their injuries and identify possible causes. METHODS: The database of the unit was reviewed for all admissions resulting from domestic barbeques from January 1998 until December 2007. Patients whose injuries resulted from bonfires, camping or other domestic fires were excluded from the study. RESULTS: The number of barbeque related burn injuries has increased as has the incidence of burns associated with gas fired barbeques. Young adult males predominate. Injuries ranged from 2 to 65% TBSA and 34% required intubation. There were 10 major complications with one death and 20% of patients required grafting. Length of stay varied from 1 to 51 days. CONCLUSIONS: In this series the number of admissions resulting from both wood fired and gas barbeques has increased. The cause of injury in open fires is associated with misuse of accelerants, whilst the cause of injury in gas barbeques is mainly due to delayed ignition of gas or incorrect use of the appliance. Distribution and severity of injuries are similar.

Laser-assisted end-to-end BioWeld anastomosis in an ovine model.

The BioWeld tube, an albumin-based exovascular stent, has been used for microsurgical anastomoses and compared to conventional sutures. The study presented investigated the potential of the BioWeld tube for vascular anastomosis in larger vessels. Laser-assisted BioWeld anastomoses were compared to conventional-sutured anatomoses of the carotid artery of Merino-x ewes. The BioWeld procedure resulted in 100% survival and 100% patency at 1 and 6 week post-operative periods, with no noticeable foreign body response. Sutured animals showed 100% survival and patency. The ischemic time for BioWeld anastomosis averaged 15 minutes compared with 10 minutes for sutures. This study indicates that the BioWeld tube is an easy to use anastomotic technique with equivalent success rates and comparable anastomotic times.

Manipulating prefabricated flaps: an experimental study examining flap viability.

As flap prefabrication becomes a more commonly used clinical tool, it is necessary to investigate the limitations of this technique. Reconstructive procedures of the face often require "custom fitted" flaps to satisfy esthetic demands. This study examines and compares the safety of manipulating thin prefabricated skin flaps versus established axial pattern skin flaps. Twenty-seven New Zealand white rabbits were used to determine if prefabricated flaps can be folded 180 degrees around the edge of the rabbits' ears. The survival of these folded prefabricated flaps was compared with the survival of axial pattern flaps sutured into an identically recipient site. In addition, flaps prefabricated in the same manner were sutured onto a straight recipient bed to evaluate the viability of the newly vascularized tissue. The folded prefabricated flaps had reduced survival (56%) compared to equivalent folded axial pattern flaps (85%), P < 0.005. The nonmanipulated prefabricated flaps and axial pattern flaps survived completely.

Flap prefabrication using the "vascular crane" principle: an experimental study and clinical application.

Techniques for tissue transfer have continued to evolve. Free flap prefabrication represents a further progression of well known plastic surgery principles in the arena of tissue transfer. This report presents an experimental study demonstrating that the repeated use of a vascular pedicle to prefabricate flaps in the rabbit is possible. There is a decrease in flap viability with the second transfer. A clinical case using this repeated transfer or "crane" principle is also reported. We conclude that the repeated use of a vascular pedicle to prefabricate multiple flaps is a viable option in selected cases.

Free-flap transfer with a synthetic arterial pedicle.

In this study, a unilateral epigastric free flap was raised in 12 rabbits. After the arterial portion of the flap (the superficial femoral artery) was replaced by a 1-cm-long polytetrafluoroethylene graft with an internal diameter of 1 mm, the flap was revascularized by two conventional microvascular end-to-end anastomoses (graft to artery and vein to vein). At 3 weeks, all flaps were raised again and the patency of the polytetrafluoroethylene grafts was checked. All grafts, including the proximal and distal anastomoses, were harvested and processed for light and electron microscopy. All grafts remained patient, and all flaps survived the period of 3 weeks. At reexploration, the graft was completely covered with connective tissue. Light and scanning electron microscopy evaluation showed that the internal surface of the graft was covered by a fibrin layer, and that the ingrowth of neoendothelium had just started from both anastomotic sites. The use of small-diameter polytetrafluoroethylene grafts in a rabbit free-flap model was demonstrated to be a reliable alternative for pedicle elongation.

Impact of tissue expansion on flap prefabrication: an experimental study in rabbits.

This study was designed to determine whether tissue expansion after vascular pedicle implantation would increase the survival area of prefabricated skin flaps. In 20 New Zealand white rabbits, the vascular pedicle consisting of the central artery and vein of the left ear was implanted into the neck. At the time of pedicle implantation a subcutaneous pocket was created measuring 5 x 14 cm beneath the implantation site. Tissue expanders of three different sizes and volumes were implanted in the rabbits of three treatment groups. No tissue expander was implanted in the animals of the control group. All flaps were transposed after 3 weeks to the contralateral ear, and flap survival was assessed 1 week later. The increased area of the flap survival was statistically significant in all three treatment groups compared to the nonexpanded flaps (P = 0.003, P = 0.004, P < 0.0001, respectively). In addition there was a statistically significant larger area of survival using a 100-cc expander measuring 5 x 14 cm (the same size as the elevated flap) compared to 40-cc (3 x 5 cm) or to 60-cc (4 x 8 cm) expanders (P < 0.001, P = 0.004, respectively). The one-way analysis of variance and the t-test were used to show statistical differences. We conclude that the time necessary for neovascularisation of the skin flap could be used to expand the tissue, not only increasing the amount of available tissue, but also enhancing the vascularity.

The value of the delay phenomenon in flap prefabrication: an experimental study in rabbits.

Neovascularisation of thin skin flaps after arteriovenous pedicle implantation (flap prefabrication) and the impact of the delay mechanism on the viability of these flaps were investigated. Twenty-four full thickness skin flaps were raised in twelve New Zealand white rabbits. Delay incisions were made at the lateral borders of the planned flaps at the same time as pedicle implantation, 1 week before pedicle implantation, or 1 week after pedicle implantation and the flaps based on the implanted vessels raised at 2 weeks after implantation. Flap survival assessed at 1 week was found to be improved when flap delay was performed 1 week before or after pedicle implantation. Angiographic studies demonstrated an increased density and linearity of the vascular pattern in these delay group flaps. The combination of the time-tested concept of delaying a flap with the newer technique of flap prefabrication appears to improve flap viability.

Laser welding of vas deferens in rodents: initial experience with fluid solders.

This study evaluates the use of sutureless laser welding for vasovasostomy. In 14 rodents, the left vas deferens underwent vasovasostomy using an albumin-based solder applied to the adventitia of the vas deferens. The solder contained the dye, indocyanine green, to allow selective absorption and denaturation by a fiber-coupled 800-nm diode laser. The right vas deferens served as a control, receiving conventional layered microsurgical repair. We used a removable 4/0 nylon stent and microclamps to appose the vas deferens during repair, with no need for stay sutures. The mean time to perform laser solder repair (23.5 min) and conventional repair (23.3 min) were not significantly different (P=0.91). However, examination after 8 weeks showed that granuloma formation (G) and patency (P) rates for the conventional suture technique (G, 14%; P, 93%) were significantly better than observed for the laser solder technique (G, 57%; P, 50%).

Maximizing flap survival in a prefabrication model using exogenous and endogenous bFGF: a new approach.

Flap prefabrication is dependent on the neovascular response that occurs between the implanted arteriovenous pedicle and the recipient tissue. Augmentation of this neovascular response with angiogenic growth factors would maximize flap survival and minimize the interval between pedicle implantation and flap rotation. Maximizing the biologic activity of endogenous growth factors would likewise positively impact upon flap survival. This study examined the role of basic fibroblast growth factor, a known potent angiogenic growth factor, on flap survival in a rabbit ear prefabrication model. Sucrose octasulfate, a substance that binds basic fibroblast growth factor, stabilizes it, and protects it from degradation, was also studied to determine its impact on flap survival. Flap survival was increased using basic fibroblast growth factor, sucrose octasulfate, and the two substances combined together. The use of substrates designed to maximize the biologic activity of endogenous growth factors, rather than relying on the artificial addition of exogenous growth factors, represents a new approach in the search for methods that will improve flap survival.

Flap prefabrication using an exteriorised vascular pedicle in a rabbit ear model.

We have developed a new model of thin flap prefabrication in the rabbit with an exteriorised vascular pedicle in a skin tube. Study of these prefabricated flaps after transfer demonstrated that distal flap survival improved as the interval between implantation and flap transfer increased. Exteriorising the pedicle minimises both donor deformity and pedicle trauma and allows easier experimental study of the neovascularisation process in flap prefabrication.