RESUMEN
Centella asiatica is an ethnomedicinal herbaceous species that grows abundantly in tropical and sub-tropical regions of China, India, South-Eastern Asia and Africa. It is a popular nutraceutical that is employed in various forms of clinical and cosmetic treatments. C. asiatica extracts are reported widely in Ayurvedic and Chinese traditional medicine to boost memory, prevent cognitive deficits and improve brain functions. The major bioactive constituents of C. asiatica are the pentacyclic triterpenoid glycosides, asiaticoside and madecassoside, and their corresponding aglycones, asiatic acid and madecassic acid. Asiaticoside and madecassoside have been identified as the marker compounds of C. asiatica in the Chinese Pharmacopoeia and these triterpene compounds offer a wide range of pharmacological properties, including neuroprotective, cardioprotective, hepatoprotective, wound healing, anti-inflammatory, anti-oxidant, anti-allergic, anti-depressant, anxiolytic, antifibrotic, antibacterial, anti-arthritic, anti-tumour and immunomodulatory activities. Asiaticoside and madecassoside are also used extensively in treating skin abnormalities, burn injuries, ischaemia, ulcers, asthma, lupus, psoriasis and scleroderma. Besides medicinal applications, these phytocompounds are considered cosmetically beneficial for their role in anti-ageing, skin hydration, collagen synthesis, UV protection and curing scars. Existing reports and experimental studies on these compounds between 2005 and 2022 have been selectively reviewed in this article to provide a comprehensive overview of the numerous therapeutic advantages of asiaticoside and madecassoside and their potential roles in the medical future.
Asunto(s)
Triterpenos , Triterpenos/farmacología , Extractos Vegetales/farmacología , Extractos Vegetales/uso terapéutico , Glicósidos , Cicatrización de HeridasRESUMEN
Two forms of the genus Passiflora, belonging to the Passifloraceae family, are commonly called yellow and purple passion. These perennial woody climbers are found in the cooler regions at higher altitudes and in lowlands of tropical areas. The presence of alkaloids, terpenes, stilbenes, flavonoids, glycosides, carotenoids, etc. in different parts of the plant provides several pharmacological properties. Because of the various uses in foods and pharmaceuticals, in vitro propagation of this genus has been performed hugely and is of great interest to researchers. From different explants via direct organogenesis under controlled aseptic conditions, callus, root, shoot, and somatic embryos are induced successfully. Different PGRs are augmented in the media for the rapid multiplication or organogenesis, especially, the high ratio of cytokinin and auxin in the basal media efficiently regenerates the shoot and root respectively. The in vitro regenerated plantlets are then acclimatized and hardened properly before transferring to the field conditions. Thus, the present first of its kind review on P. edulis exclusively encompasses the wide applications of biotechnology for this species alongside its organogenesis, embryogenesis, cytology, and endophytic microbes with special emphasis on the role of genetic transformation studies mediated by Agrobacterium sp. KEY POINTS: ⢠Critical assessment on in vitro biotechnology in P. edulis. ⢠Agrobacterium-mediated transformation in P. edulis. ⢠Role of endophytic microbes in P. edulis.
Asunto(s)
Agrobacterium , Passiflora , Agrobacterium/genética , Passiflora/genética , Biotecnología , Flavonoides , GlicósidosRESUMEN
In vitro culture of a plant cell, tissue and organ is a marvellous, eco-friendly biotechnological strategy for the production of phytochemicals. With the emergence of recent biotechnological tools, genetic engineering is now widely practiced enhancing the quality and quantity of plant metabolites. Triterpenoid saponins especially asiaticoside and madecassoside of Centella asiatica (L.) Urb. are popularly known for their neuroprotective activity. It has become necessary to increase the production of asiaticoside and madecassoside because of their high pharmaceutical and industrial demand. Thus, the review aims to provide efficient biotechnological tools along with proper strategies. This review also included a comparative analysis of various carbon sources and biotic and abiotic elicitors. The vital roles of a variety of plant growth regulators and their combinations have also been evaluated at different in vitro growth stages of Centella asiatica. Selection of explants, direct and callus-mediated organogenesis, root organogenesis, somatic embryogenesis, synthetic seed production etc. are also highlighted in this study. In a nutshell, this review will present the research outcomes of different biotechnological interventions used to increase the yield of triterpenoid saponins in C. asiatica. KEY POINTS: ⢠Critical and updated assessment on in vitro biotechnology in C. asiatica. ⢠In vitro propagation of C. asiatica and elicitation of triterpenoid saponins production. ⢠Methods for mass producing C. asiatica.
Asunto(s)
Centella , Saponinas , Triterpenos , Centella/genética , Centella/metabolismo , Triterpenos/metabolismo , Extractos Vegetales/metabolismo , Biotecnología , Saponinas/metabolismoRESUMEN
The well-known medicinal plant Centella asiatica (L.) Urban is an Ayurvedic and traditional Chinese medicine used in the treatment of different health problems and as an edible vegetable in a regular diet. Ease of availability in the wide range of environmental conditions plus low-cost cultivation process has made the plant popular in ethno-medicinal healthcare systems. In the present review, phytochemical analysis of plant-extract and pharmacological activities of bioactive-compounds are discussed based upon the available reports to understand their therapeutic potentialities along with the mechanisms behind. The results exhibited that C. asiatica and its triterpenoids demonstrated an array of pharmacological effects and health benefits, some of which were confirmed in many preclinical and clinical studies. Those reports also provided considerable evidences in support of the principles of folk treatment in different countries. Increase and maintenance of the prospective plant secondary metabolites would provide an enriched resource of drug molecules. Development of suitable derivatives of the therapeutic compounds can give an assurance for getting more effective drug candidates with reduced side effects. The review also enumerates the application of advanced nanotechnology, toxicology, and clinical-trial reports on the plant with notes on the shortcomings in the present research and future perspectives of using this medicinal plant.
Asunto(s)
Centella , Plantas Medicinales , Triterpenos , Etnobotánica , Etnofarmacología , Fitoquímicos/farmacología , Extractos Vegetales/toxicidad , Triterpenos/farmacologíaRESUMEN
Globally, water scarcity in arid and semiarid regions has become one of the critical issues that hinder sustainable agriculture. Agriculture, being a major water consumer, presents several challenges that affect water availability. Hydrogels derived from polysaccharides seed gums are hydrophilic polymers capable of retaining substantial moisture in their three-dimensional network and releasing it back into the soil during drought conditions. Implementation of hydrogels in the agricultural sectors enhances soil health, plant growth, and crop yield. Furthermore, the soil permeability, density, structure, texture, and rate of evaporation and percolation of water are modified by hydrogel. In this review, hydrogels based on natural plant seed gum like guar, fenugreek, Tara and locust beans have been discussed in terms of their occurrence, properties, chemical structure, method of synthesis, and swelling behavior. The focus extends to recent applications of modified seed gum-based natural hydrogels in agriculture, serving as soil conditioners and facilitating nutrient delivery to growing plants. The swelling behavior and inherent structure of these hydrogels can help researchers unravel their maximum possibilities to promote sustainable agriculture and attenuate the obstacles propounded by our dynamic nature. The current review also examines market growth, prospects, and challenges of eco-friendly hydrogels in recent times.
Asunto(s)
Hidrogeles , Polisacáridos , Hidrogeles/química , Polisacáridos/química , Agricultura , Suelo/química , Semillas , Agua/química , Gomas de Plantas/químicaRESUMEN
Dyes/colorants are normally used to improve the aesthetic of consumer products, and leather is one of them. The leather industry plays a significant role in the global economy. However, the leather-making process causes severe environmental pollution. Synthetic dyes are one of the major classes of leather chemicals that are responsible for the enhanced pollution load created by the industry. Over the years, excessive use of synthetic dyes in consumer products created severe environmental pollution and health hazard. Many of these synthetic dyes are carcinogenic, allergic, cause serious health problems for human beings, and have been restricted by regulatory authorities for use in consumer goods. Since ancient days, natural dyes and colorants have been used to make lives colorful. Amid the green movements and environment-friendly products/processes, natural dyes are back to mainstream fashion. Moreover, natural colorants have become a trend due to their eco-friendly nature. The demand for non-toxic and eco-friendly dyes and pigments is increasing. However, the question remains "is natural dyeing sustainable" or "how to make it sustainable." Here, we review the literature reports on natural dye's application in leather in the last two decades. This review article provides a detailed overview and current knowledge base on the various plant-based natural dyes used in leather dyeing, their fastness properties, and the need of the hour in terms of product and process development to make natural dying sustainable. The color fastness characteristics of the dyed leather to light, rub, and perspiration have been critically discussed.
Asunto(s)
Colorantes , Contaminación Ambiental , Humanos , Colorantes/química , IndustriasRESUMEN
Rapid population growth and the resultant pollution of freshwater resources have created a water stress condition reducing the availability of safe and affordable water. Guar gum, a biocompatible macromolecule obtained from the endosperm of the seeds of Cyamopsis tetragonolobus, is a fascinating raw material for multifunctional adsorbents. This review assembled the work conducted by various researchers over the past few decades and discussed the structure, properties, and different modifications methods employed to develop versatile guar gum-based adsorbent. The paper also summarized the recent progress of guar gum-based nanocomposites for the remediation of multiple hazardous substances such as organic dyes, toxic heavy metal ions, oil-water separation as well as inhibiting the growth of bacterial pathogens. Thus, the important contribution of guar gum composites to safeguard the water quality is highlighted which will overcome the limitations and streamline the future course of innovative research.
Asunto(s)
Galactanos , Aguas Residuales , Galactanos/química , Gomas de Plantas/química , Mananos/química , BiopolímerosRESUMEN
Phenoxyacetic acid herbicides are widely used in agriculture for controlling weeds. These organic compounds are persistent and recalcitrant, often contaminating water and soil. Therefore, we studied five pristine biochars (BCs), and southern yellow pine (SYP) based self-activated carbon (SAC) for the adsorptive removal of 2,4-Dichlorophenoxyacetic acid (2,4-D) herbicide. Among the tested adsorbents, SYP-SAC-15 demonstrated higher (>90%) 2,4-D removal from water. The SYP-SAC-15 was produced using a facile and green route where the biomass pyrolysis gases worked as activating agents creating a highly porous structure with a surface area of 1499.79 m2/g. Different adsorption kinetics and isotherm models were assessed for 2,4-D adsorption on SYP-SAC-15, where the data fitted best to pseudo-second order (R2 > 0.999) and Langmuir (R2 > 0.991) models, respectively. Consequently, the adsorption process was mainly dominated by the chemisorption mechanism with monolayer coverage of SYP-SAC-15 surface with 2,4-D molecules. At the optimum pH of 2, the maximum 2,4-D adsorption capacity of SYP-SAC-15 reached 471.70 mg/g. Furthermore, an increase in the water salinity demonstrated a positive influence on 2,4-D adsorption, whereas humic acid (HA) showed a negative impact on 2,4-D adsorption. The regeneration ability of SYP-SAC-15 showed excellent performance by retaining 71.09% adsorption capability at the seventh adsorption-desorption cycle. Based on the operating pH, surface area, spectroscopic data, kinetics, and isotherm modeling, the adsorption mechanism was speculated. The 2,4-D adsorption on SYP-SAC-15 was mainly governed by pore filling, electrostatic interactions, hydrogen bonding, hydrophobic and π-π interactions.
Asunto(s)
Herbicidas , Contaminantes Químicos del Agua , Herbicidas/química , Carbón Orgánico/química , Adsorción , Agua , Contaminantes Químicos del Agua/análisis , Concentración de Iones de Hidrógeno , Ácido 2,4-Diclorofenoxiacético/química , CinéticaRESUMEN
This research presents a novel and environmentally friendly approach for the synthesis of multifunctional nanobiocomposites for the efficient removal of toxic heavy metal and dye, as well as the disinfection of wastewater microorganisms. The nanobiocomposites (KAC-CS-AgNPs) were prepared by incorporating photochemically generated silver nanoparticles (AgNPs) within a chitosan (CS)-modified, high-surface-area activated carbon derived from kenaf (KAC), using a unique self-activation method. The even distribution of AgNPs was visible in the scanning electron microscopy images and a Fourier transform infra red study demonstrated major absorption peaks. The experimental results revealed that KA-CS-AgNPs exhibited exceptional adsorption efficiency for copper (Cu2+), lead (Pb2+), and Congo Red dye (CR), and showed potent antibacterial activity against Staphylococcus aureus and Escherichia coli. The maximum adsorption capacity (mg g-1) of KAC-CS-AgNPs was 71.5 for Cu2+, 72.3 for Pb2+, and 75.9 for CR, and the adsorption phenomena followed on the Freundlich and Langmuir isotherm models and the second-order kinetic model (R2 > 0.99). KAC-CS-AgNPs also exhibited excellent reusability of up to four consecutive cycles with minor losses in adsorption ability. The thermodynamic parameters indicated that the adsorption process was spontaneous and endothermic in nature. The bacterial inactivation tests demonstrated that KAC-CS-AgNPs had a strong bactericidal effect on both E. coli and S. aureus, with MIC calculated for E. coli and S. aureus as 32 µg mL-1 and 44 µg mL-1, respectively. The synthesized bioinspired nanocomposite KAC-CS-AgNPs could be an innovative solution for effective and sustainable wastewater treatment and has great potential for commercial applications.
Asunto(s)
Quitosano , Nanopartículas del Metal , Staphylococcus aureus , Plata/farmacología , Plata/química , Nanopartículas del Metal/química , Escherichia coli , Cobre/farmacología , Plomo , Antibacterianos/química , Quitosano/químicaRESUMEN
The study of phthalate migration in footwear is important from an environmental viewpoint and the consumer health perspective as it remains in direct contact with the user for a long time. In this research article, the migration of phthalate, specifically di-(2-ethylhexyl) phthalate (DEHP), from the poly(vinyl chloride) (PVC) shoe sole to the attached leather insole has been studied for six months under different environmental conditions. After one month, the DEHP concentration in the PVC sole decreased by 45-58%, and that in the leather insole increased from 0.35 mg g-1 to 38-58 mg g-1. After six months, about 90% of the DEHP has been lost from the PVC sole, and that in the leather insole reached close to its initial value (value before the experiment). The migration rate depends on the environmental conditions and the presence of phthalate soluble solvents in the sole-adhesive-insole system of the footwear. The influence of DEHP migration on the physicochemical characteristics of the PVC sole and leather insole has been studied by Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR), thermo-gravimetric analysis (TGA), and differential scanning calorimetry (DSC). The migration and emission pathways of DEHP, the influence of environmental conditions, and the possibility of human exposure to phthalate through footwear are discussed.
Asunto(s)
Dietilhexil Ftalato , Cloruro de Vinilo , Humanos , Dietilhexil Ftalato/toxicidad , Dietilhexil Ftalato/análisis , Plastificantes/análisis , Plastificantes/química , Plastificantes/metabolismo , Cloruro de Polivinilo/química , Cloruro de Vinilo/análisis , SolventesRESUMEN
The cadmium-contaminated water body is a worldwide concern for the environment and toxic to human beings and the removal of cadmium ions from drinking and groundwater sustainably and cost-effectively is important. A novel nano-biocomposite was obtained by impregnating silver nanoparticles (AgNPs) within kenaf-based activated carbon (KAC) in the presence of chitosan matrix (CS) by a simple, facile photoirradiation method. The nano-biocomposite (CS-KAC-Ag) was characterized by an environmental scanning electron microscope equipped with energy dispersive X-ray spectroscopy (ESEM-EDX), Fourier-transform infrared spectroscopy (FTIR), and Brunauer−Emmett−Teller (BET) method. A Box−Behnken design of response surface methodology (RSM) was used to optimize the adsorption of Cd2+. It was found that 95.1% of Cd2+ (10 mg L−1) was eliminated at pH 9, contact time of 120 min, and adsorbent dosage of 20 mg, respectively. The adsorption of Cd2+ by CS-KAC-Ag is also in agreement with the pseudo-second-order kinetic model with an R2 (coefficient of determination) factor greater than 99%. The lab data were also corroborated by tests conducted using water samples collected from mining sites in Mexico. Along with Cd2+, the CS-KAC-Ag exhibited superior removal efficiency towards Cr6+ (91.7%) > Ni2+ (84.4%) > Co2+ (80.5%) at pH 6.5 and 0.2 g L−1 dose of the nano-adsorbent. Moreover, the adsorbent was regenerated, and the adsorption capacity remained unaltered after five successive cycles. The results showed that synthesized CS-KAC-Ag was a biocompatible and versatile porous filtering material for the decontamination of different toxic metal ions.
RESUMEN
In this study, an effective and green adsorbent was prepared by the self- activation of kenaf fiber and then the kenaf-based activated carbon (KAC) was applied for the removal of lead Pb(II), copper Cu(II), and Congo red (CR) dye from an aqueous solution by the process of adsorption. The surface morphology of mesoporous adsorbent was characterized. The KAC showed good capacity of adsorption of as Pb(II), Cu(II), and anionic dye CR in very short period of agitation. The adsorbent efficiency of metal ions and dye was estimated by varying the adsorbent dose, pH, contact time, initial metals and dye concentration, and temperature. Optimum adsorption of metal ions and CR dye was observed at pH 6, and at pH 4 at 120 min, respectively. The adsorption isotherm was described by the Langmuir and Freundlich isotherm equations. The green adsorbent followed the pseudo-second-order kinetic model with correlation coefficients R2 value >0.99. The increase in adsorption temperature enhanced the adsorption efficiency for both heavy metals and dye. The KAC showed no significant loss of the adsorption capacity after 3 cycles of reuse.
Asunto(s)
Metales Pesados , Contaminantes Químicos del Agua , Adsorción , Carbón Orgánico , Rojo Congo/química , Concentración de Iones de Hidrógeno , Cinética , Contaminantes Químicos del Agua/análisisRESUMEN
In this communication, we present a streamlined, reproducible synthetic method for the production of size-tunable poly(methyl methacrylate) (PMMA) nanoparticles (PMMANPs) and amine-functionalized block-copolymer PMMANPs (H2N-PMMANPs) by varying subcritical concentrations (i.e., below the concentration required to form micelles at 1 atm and 20 °C) of sodium dodecyl sulfate (SDS). We plotted the Z-average size data against SDS concentration, which revealed a second-order exponential decay function, expressed as [...] .
RESUMEN
The present study aimed to improve the adsorption characteristics of the pristine layered double hydroxide (LDH) by physicochemical modification using polyethylene glycol (PEG400), a nontoxic hydrophilic polymer. With this objective, LDH was synthesized and modified with different concentrations of PEG400. The PEG-modified LDHs (LDH/PEGs) were characterized using X-ray diffraction, thermogravimetric analysis, Brunauer-Emmett-Teller surface area and porosity measurement, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and zeta potential measurements. The adsorption properties of the pristine LDH (PLDH) and the LDH/PEGs were studied for the removal of Acid Orange II from water, and the results were compared. The PLDH treated with 15% PEG solution showed â¼30% increase in adsorption capacity as compared to the PLDH. The adsorption isotherm data were analyzed using Langmuir, Freundlich, and Temkin isotherm models. The values of thermodynamic parameters such as ΔS and ΔH showed the spontaneous and endothermic nature of the adsorption process. The adsorption kinetics data for both PLDH and the LDH/PEG adsorbents presented a good fit to the pseudo-second-order kinetic model.
RESUMEN
Intercalation compounds were obtained by introduction of guest methyl orange (MO) into the interlayer space of host Mg/Al and Ni/Al layered double hydroxides (LDHs). Three synthesis methods of organic anion-LDH intercalation compounds, i.e., coprecipitation, reconstruction of the MII(Al)O mixed oxides, and anion exchange of LDH, were compared. The former method gives rise to a highly organized MO-intercalated Mg/Al LDH with an interlayer spacing of 2.43 nm and up to seven (00l) reflection orders. Reconstruction of the mixed oxide by intercalation with MO in the restored LDH was only achieved with Mg(Al)O. In this case, a competitive adsorption of MO on the external surface of the crystals was also seen. On the other hand, intercalation compounds exhibiting interlayer spacing of 2.43 nm were obtained with both Mg- and Ni-containing LDH using the anionic exchange method. The equilibrium and kinetic adsorption properties of the compounds were analyzed by UV-visible spectroscopy in anionic exchange experiments. According to the pseudo-second-order adsorption model, the amounts of adsorbed MO reach 3.82 and 2.83 mequiv/g for Mg- and Ni-containing LDHs, respectively, which are close to their respective anionic exchange capacity. The adsorption rates are on the same order of magnitude for the two LDHs (0.10-0.44 g mmol(-1) min(-1)), the equilibrium being reached in less than 60 min. The decomposition of MO by combustion of the organic moieties under an oxidizing atmosphere is delayed in Mg-containing MO-LDH hybrids when compared to the free MO molecule, showing that the thermal stability of MO species is enhanced after intercalation. In Ni-containing LDH, the main decomposition step of MO occurs 300 degrees C below that of Mg-containing LDH. This was rationalized in terms of a catalysis by the Ni-containing oxides formed during the thermal treatment. So these materials exhibit several advantages useful for the development of eco-friendly processes for the removal of dyes from effluents of textile, plastic, and paper industries.