RESUMEN
BACKGROUND: Non-contact anterior cruciate ligament (ACL) injuries are a major concern in sport-related activities due to dynamic knee movements. There is a paucity of finite element (FE) studies that have accurately replicated the knee geometry, kinematics, and muscle forces during dynamic activities. The objective of this study was to develop and validate a knee FE model and use it to quantify the relationships between sagittal plane knee kinematics, kinetics and the resulting ACL strain. METHODS: 3D images of a cadaver knee specimen were segmented (bones, cartilage, and meniscus) and meshed to develop the FE model. Knee ligament insertion sites were defined in the FE model via experimental digitization of the specimen's ligaments. The response of the model was validated against multiple physiological knee movements using published experimental data. Single-leg jump landing motions were then simulated on the validated model with muscle forces and kinematic inputs derived from motion capture and rigid body modelling of ten participants. RESULTS: The maximum ACL strain measured with the model during jump landing was 3.5 ± 2.2%, comparable to published experimental results. Bivariate analysis showed no significant correlation between body weight, ground reaction force and sagittal plane parameters (such as joint flexion angles, joint moments, muscle forces, and joint velocity) and ACL strain. Multivariate regression analysis showed increasing trunk, hip and ankle flexion angles decreases ACL strain (R2 = 90.04%, p < 0.05). CONCLUSIONS: Soft landing decreases ACL strain and the relationship could be presented through an empirical equation. The model and the empirical relation developed in this study could be used to better predict ACL injury risk and prevention strategies during dynamic activities.
Asunto(s)
Lesiones del Ligamento Cruzado Anterior , Ligamento Cruzado Anterior , Humanos , Ligamento Cruzado Anterior/fisiología , Fenómenos Biomecánicos/fisiología , Masculino , Lesiones del Ligamento Cruzado Anterior/fisiopatología , Lesiones del Ligamento Cruzado Anterior/prevención & control , Lesiones del Ligamento Cruzado Anterior/etiología , Articulación de la Rodilla/fisiología , Cadáver , Simulación por Computador , Análisis de Elementos Finitos , Adulto , Femenino , Movimiento/fisiología , Adulto Joven , Persona de Mediana Edad , Estrés Mecánico , Músculo Esquelético/fisiología , Modelos BiológicosRESUMEN
Metatarsal fractures represent the most common traumatic foot injury; however, metatarsal fracture thresholds remain poorly characterized, which affects performance targets for protective footwear. This experimental study investigated impact energies, forces, and deformations to characterize metatarsal fracture risk for simulated in situ workplace impact loading. A drop tower setup conforming to ASTM specifications for testing impact resistance of metatarsal protective footwear applied a target impact load (22-55 J) to 10 cadaveric feet. Prior to impact, each foot was axially loaded through the tibia with a specimen-specific bodyweight load to replicate a natural weight-bearing stance. Successive iterations of impact tests were performed until a fracture was observed with X-ray imaging. Descriptive statistics were computed for force, deformation, and impact energy. Correlational analysis was conducted on donor age, BMI, deformation, force, and impact energy. A survival analysis was used to generate injury risk curves (IRC) using impact energy and force. All 10 specimens fractured with the second metatarsal being the most common fracture location. The mean peak energy, force, and deformation during fracture were 46.6 J, 4640 N, 28.9 mm, respectively. Survival analyses revealed a 50% fracture probability was associated with 35.8 J and 3562 N of impact. Foot deformation was not significantly correlated (p = 0.47) with impact force, thus deformation is not recommended to predict metatarsal fracture risk. The results from this study can be used to improve test standards for metatarsal protection, provide performance targets for protective footwear developers, and demonstrate a methodological framework for future metatarsal fracture research.
Asunto(s)
Traumatismos del Tobillo , Traumatismos de los Pies , Fracturas Óseas , Huesos Metatarsianos , Humanos , Huesos Metatarsianos/diagnóstico por imagen , Huesos Metatarsianos/lesiones , Pie , Fracturas Óseas/diagnóstico por imagen , Lugar de TrabajoRESUMEN
Accidental foot injuries including metatarsal fractures commonly result from compressive loading. The ability of personal protective equipment to prevent these traumatic injuries depends on the understanding of metatarsal fracture tolerance. However, the in situ fracture tolerance of the metatarsals under direct compressive loading to the foot's dorsal surface remains unexplored, even though the metatarsals are the most commonly fractured bones in the foot. The goal of this study was to quantify the in situ fracture tolerance of the metatarsals under simulated quasi-static compressive loading. Fresh-frozen cadaveric feet (n = 10) were mounted into a testing apparatus to replicate a natural stance and loaded at the midmetatarsals with a cylindrical bar to simulate a crushing-type injury. A 900 N compressive force was initially applied, followed by 225 N successive load increments. Specimens were examined using X-ray imaging between load increments to assess for the presence of metatarsal fractures. Descriptive statistics were conducted for metatarsal fracture force and deformation. Pearson correlation tests were used to quantify the correlation between fracture force with age and body mass index (BMI). The force and deformation at fracture were 1861 ± 642 N (mean ± standard deviation) and 22.6 ± 3.4 mm, respectively. Fracture force was correlated with donor BMI (r = 0.90). Every fractured specimen experienced a transverse fracture in the second metatarsal. New biomechanical data from this study further quantify the metatarsal fracture risk under compressive loading and will help to improve the development and testing of improved personal protective equipment for the foot to avoid catastrophic injury.
Asunto(s)
Traumatismos de los Pies , Fracturas Óseas , Traumatismos de la Rodilla , Huesos Metatarsianos , Fenómenos Biomecánicos , Pie , Humanos , PresiónRESUMEN
PURPOSE: Neuroimaging provides great utility in complex spinal surgeries, particularly when anatomical geometry is distorted by pathology (tumour, degeneration, etc.). Spinal cord MRI diffusion tractography can be used to generate streamlines; however, it is unclear how well they correspond with white matter tract locations along the cord microstructure. The goal of this work was to evaluate the spatial correspondence of DTI tractography with anatomical MRI in healthy anatomy (where anatomical locations can be well defined in T1-weighted images). METHODS: Ten healthy volunteers were scanned on a 3T system. T1-weighted (1 × 1 × 1 mm) and diffusion-weighted images (EPI readout, 2 × 2 × 2 mm, 30 gradient directions) were acquired and subsequently registered (Spinal Cord Toolbox (SCT)). Atlas-based (SCT) anatomic label maps of the left and right lateral corticospinal tracts were identified for each vertebral region (C2-C6) from T1 images. Tractography streamlines were generated with a customized approach, enabling seeding of specific spinal tract regions corresponding to individual vertebral levels. Spatial correspondence of generated fibre streamlines with anatomic tract segmentations was compared in unseeded regions of interest (ROIs). RESULTS: Spatial correspondence of the lateral corticospinal tract streamlines was good over a single vertebral ROI (Dice's similarity coefficient (DSC) = 0.75 ± 0.08, Hausdorff distance = 1.08 ± 0.17 mm). Over larger ROI, fair agreement between tractography and anatomical labels was achieved (two levels: DSC = 0.67 ± 0.13, three levels: DSC = 0.52 ± 0.19). CONCLUSION: DTI tractography produced good spatial correspondence with anatomic white matter tracts, superior to the agreement between multiple manual tract segmentations (DSC ~ 0.5). This supports further development of spinal cord tractography for computer-assisted neurosurgery.
Asunto(s)
Imagen de Difusión Tensora , Sustancia Blanca , Encéfalo , Humanos , Procesamiento de Imagen Asistido por Computador , Imagen por Resonancia Magnética , Tractos Piramidales/diagnóstico por imagen , Médula Espinal/diagnóstico por imagen , Sustancia Blanca/diagnóstico por imagenRESUMEN
Finite helical axes (FHAs) are a potentially effective tool for joint kinematic analysis. Unfortunately, no straightforward guidelines exist for calculating accurate FHAs using prepackaged six degree-of-freedom (6 DOF) rigid body trackers. Thus, this study aimed to: (1) describe a protocol for calculating FHA parameters from 6 DOF rigid body trackers using the screw matrix and (2) to maximize the number of accurate FHAs generated from a given data set using a moving window analysis. Four Optotrak® Smart Markers were used as the rigid body trackers, two moving and two fixed, at different distances from the hinge joint of a custom-machined jig. 6D OF pose information was generated from 51 static positions of the jig rotated and fixed in 0.5 deg increments up to 25 deg. Output metrics included the FHA direction cosines, the rotation about the FHA, the translation along the axis, and the intercept of the FHA with the plane normal to the jig's hinge joint. FHA metrics were calculated using the relative tracker rotation from the starting position, and using a moving window analysis to define a minimum acceptable rotational displacement between the moving tracker data points. Data analysis found all FHA rotations calculated from the starting position were within 0.15 deg of the prescribed jig rotation. FHA intercepts were most stable when determined using trackers closest to the hinge axis. Increasing the moving window size improved the FHA direction cosines and center of rotation accuracy. Window sizes larger than 2 deg had an intercept deviation of less than 1 mm. Furthermore, compared to the 0 deg window size, the 2 deg window had a 90% improvement in FHA intercept precision while generating almost an equivalent number of FHA axes. This work identified a solution to improve FHA calculations for biomechanical researchers looking to describe changes in 3D joint motion.
Asunto(s)
Articulaciones/fisiología , Fenómenos Mecánicos , Movimiento , Algoritmos , Fenómenos BiomecánicosRESUMEN
Implant subsidence into the underlying trabecular bone is a common problem in orthopaedic surgeries; however, the ability to pre-operatively predict implant subsidence remains limited. Current state-of-the-art computational models for predicting subsidence have issues addressing this clinical problem, often resulting from the size and complexity of existing subject-specific, image-based finite element (FE) models. The current study aimed to develop a simplified approach to FE modeling of subject-specific trabecular bone indentation resulting from implant penetration. Confined indentation experiments of human trabecular bone with flat- and sharp-tip indenters were simulated using FE analysis. A generalized continuum-level approach using a meshless smoothed particle hydrodynamics (SPH) approach and an isotropic crushable foam (CF) material model was developed for the trabecular bone specimens. Five FE models were generated with CF material parameters calibrated to cadaveric specimens spanning a range of bone mineral densities (BMD). Additionally, an alternative model configuration was developed that included consideration of bone marrow, with bone and marrow material parameters assigned to elements randomly according to bone volume (BV%) measurements of experimental specimens, owing to the non-uniform nature of trabecular bone tissue microstructure. Statistical analysis found significant correlation between the shapes of the numerical and experimental force-displacement curves. FE models accurately captured the bone densification patterns observed experimentally. Inclusion of marrow elements offered improved response prediction of the flat-tip indenter tests. Ultimately, the developed approach demonstrates the ability of a generalizable continuum-level SPH approach to capture bone variability using clinical bone imaging metrics without needing detailed image-based geometries, a significant step towards simplified subject-specific modeling of implant subsidence.
RESUMEN
Pessaries are removable gynecological prosthetic devices that provide mechanical support for temporary or long-term symptom relief of pelvic floor disorders, such as pelvic organ prolapse and stress urinary incontinence. To date, limited mechanical tests have been performed on physical pessary designs to characterize their behaviour under load; however, custom pessary manufacturing is expensive and time consuming. As an alternative, finite element (FE) modeling can provide detailed numerical insight into the response of a pessary design under load but to date has seen limited application, with little data available for pessary silicone materials. This study aimed to identify hyperelastic material models for two silicone materials used in custom pessary cocoon moulded manufacturing towards FE analysis of ring with support (RWS) pessaries. It was hypothesized that hyperelastic material models could be identified to capture the force and deformation response of multiple RWS sizes under different boundary conditions and silicone materials (Shore 60A and 40A). To understand the material characteristics of pessary silicone, uniaxial tension and compression tests were performed then the experimental data was fit with Mooney-Rivlin (MR) material models. To ensure the material models characterize the pessary behaviour, data from mechanical tests representing the RWS pessary folding and modified 3-point bending were compared to FE recreations (FEBio) of the same tests with the MR materials applied to the pessaries. The FE model results demonstrated good agreement in the force-displacement response for the fold and 3-point bending models for different pessary sizes and silicone stiffnesses. This work demonstrates the hyperelastic material models' efficacy and will enable future studies to improve biomechanical analysis of silicone pessary designs.
RESUMEN
STUDY DESIGN: In-vitro cadaveric biomechanical study. OBJECTIVES: Long posterior spinal fusion is a standard treatment for adult spinal deformity. However, these rigid constructs are known to alter motion and stress to the adjacent non-instrumented vertebrae, increasing the risk of proximal junctional kyphosis (PJK). This study aimed to biomechanically compare a standard rigid construct vs constructs "topped off" with a semi-rigid construct. By understanding semi-rigid constructs' effect on motion and overall construct stiffness, surgeons and researchers could better optimize fusion constructs to potentially decrease the risk of PJK and the need for revision surgery. METHODS: Nine human cadaveric spines (T1-T12) underwent non-destructive biomechanical range of motion tests in pure bending or torsion and were instrumented with an all-pedicle-screw (APS) construct from T6-T9. The specimens were sequentially instrumented with semi-rigid constructs at T5: (i) APS plus sublaminar bands; (ii) APS plus supralaminar hooks; (iii) APS plus transverse process hooks; and (iv) APS plus short pedicle screws. RESULTS: APS plus transverse process hooks had a range of motion (ie, relative angle) for T4-T5 and T5-T6, as well as an overall mechanical stiffness for T1-T12, that was more favourable, as it reduced motion at adjacent levels without a stark increase in stiffness. Moreover, APS plus transverse process hooks had the most linear change for range of motion across the entire T3-T7 range. CONCLUSIONS: Present findings suggest that APS plus transverse process hooks has a favourable biomechanical effect that may reduce PJK for long spinal fusions compared to the other constructs examined.
RESUMEN
Brain and spinal cord injuries have devastating consequences on quality of life but are challenging to assess experimentally due to the traumatic nature of such injuries. Finite element human body models (HBM) have been developed to investigate injury but are limited by a lack of biofidelic spinal cord implementation. In many HBM, brain models terminate with a fixed boundary condition at the brain stem. The goals of this study were to implement a comprehensive representation of the spinal cord into a contemporary head and neck HBM, and quantify the effect of the spinal cord on brain deformation during simulated impacts. Spinal cord tissue geometries were developed, based on 3D medical imaging and literature data, meshed, and implemented into the GHBMC 50th percentile male model. The model was evaluated in frontal, lateral, rear, and oblique impact conditions, and the resulting maximum principal strains in the brain tissue were compared, with and without the spinal cord. A new cumulative strain curve metric was proposed to quantify brain strain distribution. Presence of the spinal cord increased brain tissue strains in all simulated cases, owing to a more compliant boundary condition, highlighting the importance of the spinal cord to assess brain response during impact.
Asunto(s)
Calidad de Vida , Traumatismos de la Médula Espinal , Masculino , Humanos , Encéfalo , Médula Espinal , Cabeza , Análisis de Elementos Finitos , Fenómenos BiomecánicosRESUMEN
Computational human body models (HBMs) can identify potential injury pathways not easily accessible through experimental studies, such as whiplash induced injuries. However, previous computational studies investigating neck response to simulated impact conditions have neglected the effect of pre-impact neck posture and muscle pre-tension on the intervertebral kinematics and tissue-level response. The purpose of the present study was addressing this knowledge gap using a detailed neck model subjected to simulated low-acceleration rear impact conditions, towards improved intervertebral kinematics and soft tissue response for injury assessment. An improved muscle path implementation in the model enabled the modeling of muscle pre-tension using experimental muscle pre-stretch data determined from previous cadaver studies. Cadaveric neck impact tests and human volunteer tests with the corresponding cervical spine posture were simulated using a detailed neck model with the reported boundary conditions and no muscle activation. Computed intervertebral kinematics of the model with pre-tension achieved, for the first time, the S-shape behavior of the neck observed in low severity rear impacts of both cadaver and volunteer studies. The maximum first principal strain in the muscles for the model with pre-tension was 27% higher than that without pre-tension. Although, the pre-impact neck posture was updated to match the average posture reported in the experimental tests, the change in posture was generally small with only small changes in vertebral kinematics and muscle strain. This study provides a method to incorporate muscle pre-tension in HBM and quantifies the importance of pre-tension in calculating tissue-level distractions.
Asunto(s)
Cuello , Lesiones por Latigazo Cervical , Humanos , Fenómenos Biomecánicos , Cuello/fisiología , Vértebras Cervicales/fisiología , Músculos/lesiones , Postura , CadáverRESUMEN
Spinal cord impacts can have devastating consequences. Computational models can investigate such impacts but require biofidelic numerical representations of the neural tissues and fluid-structure interaction with cerebrospinal fluid. Achieving this biofidelity is challenging, particularly for efficient implementation of the cerebrospinal fluid in full computational human body models. The goal of this study was to assess the biofidelity and computational efficiency of fluid-structure interaction methods representing the cerebrospinal fluid interacting with the spinal cord, dura, and pia mater using experimental pellet impact test data from bovine spinal cords. Building on an existing finite element model of the spinal cord and pia mater, an orthotropic hyperelastic constitutive model was proposed for the dura mater and fit to literature data. The dura mater and cerebrospinal fluid were integrated with the existing finite element model to assess four fluid-structure interaction methods under transverse impact: Lagrange, pressurized volume, smoothed particle hydrodynamics, and arbitrary Lagrangian-Eulerian. The Lagrange method resulted in an overly stiff mechanical response, whereas the pressurized volume method over-predicted compression of the neural tissues. Both the smoothed particle hydrodynamics and arbitrary Lagrangian-Eulerian methods were able to effectively model the impact response of the pellet on the dura mater, outflow of the cerebrospinal fluid, and compression of the spinal cord; however, the arbitrary Lagrangian-Eulerian compute time was approximately five times higher than smoothed particle hydrodynamics. Crucial to implementation in human body models, the smoothed particle hydrodynamics method provided a computationally efficient and representative approach to model spinal cord fluid-structure interaction during transverse impact.
Asunto(s)
Cuerpo Humano , Médula Espinal , Animales , Fenómenos Biomecánicos , Bovinos , Análisis de Elementos Finitos , Humanos , Hidrodinámica , Médula Espinal/fisiologíaRESUMEN
This study developed a finite element (FE) model of simulated locking plate fixation to examine the strain response following supracondylar femoral plate attachment and under compressive loading. An implicit FE model of a synthetic femur with a distal fracture gap stabilized with a lateral plate was evaluated following attachment and 500 N loading, considering locking and non-locking proximal screws configurations. Screw pre-tension values of 60 N for both distal and proximal non-locking screws yielded good agreement with plate experimental strain data in attached (unloaded) and loaded conditions. The results highlight the importance of pre-tensioning in modeling plate attachment using non-locking screws.
Asunto(s)
Fracturas del Fémur , Fijación Interna de Fracturas , Fenómenos Biomecánicos , Placas Óseas , Tornillos Óseos , Fracturas del Fémur/cirugía , Fémur/cirugía , Análisis de Elementos Finitos , Fijación Interna de Fracturas/métodos , HumanosRESUMEN
BACKGROUND: Impulse loading of the lower leg during events such as ejection seat landings or in-vehicle land mine blasts may result in devastating injuries. These impacts achieve higher forces over shorter durations than car crashes, from which experimental results have formed the current basis for protective measures of an axial force limit of 5.4 kN, as registered by an anthropomorphic test device (ATD). The hypotheses of this study were that the injury tolerance of the isolated tibia to short-duration axial loading is higher than that previously reported and that secondary parameters such as momentum or kinetic energy are significant for fracture tolerance, in addition to force. METHODS: Seven pairs of cadaveric tibias were impacted using a pneumatic testing apparatus, replicating short-duration axial impulse events. One specimen from each pair was impacted with a light mass and the contralateral impacted with a heavy mass, to investigate the effects of momentum and kinetic energy, as well as force, on injury. Impacts were applied incrementally until failure. RESULTS: Force, kinetic energy, age, and height were shown to be significant factors in the probability of fracture. A 10% risk of injury corresponded to an impact force of 7.9 kN, with an average kinetic energy of 240 J. In comparison, this same impact level applied to an ATD would register a force of 16.2 kN because of the higher stiffness of the ATD. CONCLUSIONS: These results suggest that the current injury standard may be too conservative for the tibia during high-speed impacts such as in-vehicle land mine blasts and that factors in addition to force should be taken into consideration.
Asunto(s)
Tibia/lesiones , Adulto , Factores de Edad , Fenómenos Biomecánicos/fisiología , Estatura , Fracturas Óseas/etiología , Fracturas Óseas/fisiopatología , Humanos , Masculino , Persona de Mediana Edad , Factores de Riesgo , Estrés Mecánico , Tibia/fisiología , Soporte de Peso/fisiologíaRESUMEN
The data included in this article provides additional supporting information on our publication (McGregor et al. [1]) on the review of the natural lattice architecture in human bone and its implication towards titanium (Ti) lattice design for laser powder bed fusion and electron beam powder bed fusion. For this work, X-ray computed tomography was deployed to understand and visualize a Ti-6Al-4V lattice structure manufactured by laser powder bed fusion. This manuscript includes details about the manufacturing of the lattice structure using laser powder bed fusion and computed tomography methods used for analyzing the lattice structure. Additionally, a comprehensive literature review was conducted to understand how lattice parameters are controlled in additively manufactured Ti and Ti-alloy parts aimed at replacing or augmenting human bone. From this literature review, lattice design information was collected and is summarized in tabular form in this manuscript.
RESUMEN
Finite Element (FE) modelling of spinal cord response to impact can provide unique insights into the neural tissue response and injury risk potential. Yet, contemporary human body models (HBMs) used to examine injury risk and prevention across a wide range of impact scenarios often lack detailed integration of the spinal cord and surrounding tissues. The integration of a spinal cord in contemporary HBMs has been limited by the need for a continuum-level model owing to the relatively large element size required to be compatible with HBM, and the requirement for model development based on published material properties and validation using relevant non-linear material data. The goals of this study were to develop and assess non-linear material model parameters for the spinal cord parenchyma and pia mater, and incorporate these models into a continuum-level model of the spinal cord with a mesh size conducive to integration in HBM. First, hyper-viscoelastic material properties based on tissue-level mechanical test data for the spinal cord and hyperelastic material properties for the pia mater were determined. Secondly, the constitutive models were integrated in a spinal cord segment FE model validated against independent experimental data representing transverse compression of the spinal cord-pia mater complex (SCP) under quasi-static indentation and dynamic impact loading. The constitutive model parameters were fit to a quasi-linear viscoelastic model with an Ogden hyperelastic function, and then verified using single element test cases corresponding to the experimental strain rates for the spinal cord (0.32-77.22 s-1) and pia mater (0.05 s-1). Validation of the spinal cord model was then performed by re-creating, in an explicit FE code, two independent ex-vivo experimental setups: 1) transverse indentation of a porcine spinal cord-pia mater complex and 2) dynamic transverse impact of a bovine SCP. The indentation model accurately matched the experimental results up to 60% compression of the SCP, while the impact model predicted the loading phase and the maximum deformation (within 7%) of the SCP experimental data. This study quantified the important biomechanical contribution of the pia mater tissue during spinal cord deformation. The validated material models established in this study can be implemented in computational HBM.
RESUMEN
Active neck musculature plays an important role in the response of the head and neck during impact and can affect the risk of injury. Finite element Human Body Models (HBM) have been proposed with open and closed-loop controllers for activation of muscle forces; however, controllers are often calibrated to specific experimental loading cases, without considering the intrinsic role of physiologic muscle reflex mechanisms under different loading conditions. This study aimed to develop a single closed-loop controller for neck muscle activation in a contemporary male HBM based on known reflex mechanisms and assess how this approach compared to current open-loop controllers across a range of impact directions and severities. Controller parameters were optimized using volunteer data and independently assessed across twelve impact conditions. The kinematics from the closed-loop controller simulations showed good average CORA rating to the experimental data (0.699) for the impacts following the ISO/TR9790 standard. Compared to previously optimized open-loop activation strategy, the average difference was less than 9%. The incorporation of the reflex mechanisms using a closed-loop controller can provide robust performance for a range of impact directions and severities, which is critical to improving HBM response under a larger spectrum of automotive impact simulations.
Asunto(s)
Accidentes de Tránsito , Cabeza/fisiopatología , Modelos Biológicos , Músculos del Cuello/fisiopatología , Cuello/fisiopatología , Fenómenos Biomecánicos , Análisis de Elementos Finitos , HumanosRESUMEN
Neck muscle activation is increasingly important for accurate prediction of occupant response in automotive impact scenarios and occupant excursion resulting from active safety systems such as autonomous emergency braking. Muscle activation and optimization in frontal impact scenarios using computational Human Body Models have not been investigated over the broad range of accelerations relevant to these events. This study optimized the muscle activation of a contemporary finite element model of the human head and neck for human volunteer experiments over a range of frontal impact severities (2 g to 15 g). The neck muscles were grouped as flexors and extensors, and optimization was undertaken for each group based on muscle activation level and activation time. The boundaries for optimization were defined using data from the literature and a preliminary parametric study. A linear polynomial method was used to optimize the model head kinematics to the volunteer experiments for each impact severity. The optimized models predicted muscle activation to increase with higher impact severities, and improved the average cross-correlation by 35% (0.561-0.755) relative to the Maximum Muscle Activation (MMA) scheme in the original model. Importantly, a newly proposed Cocontraction Muscle Activation (CMA) scheme for maintaining the head in a neutral posture provided a 23% on average improvement in correlation compared to the MMA scheme. In conclusion, this study identified a new scheme to obtain more accurate response kinematics across multiple impact severities in computational Human Body Models as well as contributing to the understanding of muscle influence during frontal impact scenarios.
Asunto(s)
Accidentes de Tránsito , Modelos Biológicos , Fenómenos Biomecánicos , Análisis de Elementos Finitos , Humanos , Cuello , VoluntariosRESUMEN
BACKGROUND: Physiotherapy is essential for the successful rehabilitation of common shoulder injuries and following shoulder surgery. Patients may receive some training and supervision for shoulder physiotherapy through private pay or private insurance, but they are typically responsible for performing most of their physiotherapy independently at home. It is unknown how often patients perform their home exercises and if these exercises are performed correctly without supervision. There are no established tools for measuring this. It is, therefore, unclear if the full benefit of shoulder physiotherapy treatments is being realized. OBJECTIVE: The proposed research will (1) validate a smartwatch and machine learning (ML) approach for evaluating adherence to shoulder exercise participation and technique in a clinical patient population with rotator cuff pathology; (2) quantify the rate of home physiotherapy adherence, determine the effects of adherence on recovery, and identify barriers to successful adherence; and (3) develop and pilot test an ethically conscious adherence-driven rehabilitation program that individualizes patient care based on their capacity to effectively participate in their home physiotherapy. METHODS: This research will be conducted in 2 phases. The first phase is a prospective longitudinal cohort study, involving 120 patients undergoing physiotherapy for rotator cuff pathology. Patients will be issued a smartwatch that will record 9-axis inertial sensor data while they perform physiotherapy exercises both in the clinic and in the home setting. The data collected in the clinic under supervision will be used to train and validate our ML algorithms that classify shoulder physiotherapy exercise. The validated algorithms will then be used to assess home physiotherapy adherence from the inertial data collected at home. Validated outcome measures, including the Disabilities of the Arm, Shoulder, and Hand questionnaire; Numeric Pain Rating Scale; range of motion; shoulder strength; and work status, will be collected pretreatment, monthly through treatment, and at a final follow-up of 12 months. We will then relate improvement in patient outcomes to measured physiotherapy adherence and patient baseline variables in univariate and multivariate analyses. The second phase of this research will involve the evaluation of a novel rehabilitation program in a cohort of 20 patients. The program will promote patient physiotherapy engagement via the developed technology and support adherence-driven care decisions. RESULTS: As of December 2019, 71 patients were screened for enrollment in the noninterventional validation phase of this study; 65 patients met the inclusion and exclusion criteria. Of these, 46 patients consented and 19 declined to participate in the study. Only 2 patients de-enrolled from the study and data collection is ongoing for the remaining 44. CONCLUSIONS: This study will provide new and important insights into shoulder physiotherapy adherence, the relationship between adherence and recovery, barriers to better adherence, and methods for addressing them. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): DERR1-10.2196/17841.
RESUMEN
OBJECTIVEThe cortical bone trajectory (CBT) technique for pedicle screw placement has gained popularity among spinal surgeons. It has been shown biomechanically to provide better fixation and improved pullout strength compared to a traditional pedicle screw trajectory. The CBT technique also allows for a less invasive approach for fusion and may have lower incidence of adjacent-level disease. A limitation of the current CBT technique is a lack of readily identifiable and reproducible visual landmarks to guide freehand CBT screw placement in comparison to the well-defined identifiable landmarks for traditional pedicle screw insertion. The goal of this study was to validate a safe and intuitive freehand technique for placement of CBT screws based on optimization of virtual CBT screw placement using anatomical landmarks in the lumbar spine. The authors hypothesized that virtual identification of anatomical landmarks on 3D models of the lumbar spine generated from CT scans would translate to a safe intraoperative freehand technique.METHODSCustomized, open-source medical imaging and visualization software (3D Slicer) was used in this study to develop a workflow for virtual simulation of lumbar CBT screw insertion. First, in an ex vivo study, 20 anonymous CT image series of normal and degenerative lumbar spines and virtual screw insertion were conducted to place CBT screws bilaterally in the L1-5 vertebrae for each image volume. The optimal safe CBT trajectory was created by maximizing both the screw length and the cortical bone contact with the screw. Easily identifiable anatomical surface landmarks for the start point and trajectory that best allowed the reproducible idealized screw position were determined. An in vivo validation of the determined landmarks from the ex vivo study was then performed in 10 patients. Placement of virtual "test" cortical bone trajectory screws was simulated with the surgeon blinded to the real-time image-guided navigation, and the placement was evaluated. The surgeon then placed the definitive screw using image guidance.RESULTSFrom the ex vivo study, the optimized technique and landmarks were similar in the L1-4 vertebrae, whereas the L5 optimized technique was distinct. The in vivo validation yielded ideal, safe, and unsafe screws in 62%, 16%, and 22% of cases, respectively. A common reason for the nonidealized trajectories was the obscuration of patient anatomy secondary to severe degenerative changes.CONCLUSIONSCBT screws were placed ideally or safely 78% of the time in a virtual simulation model. A 22% rate of unsafe freehand trajectories suggests that the CBT technique requires use of image-guided navigation or x-ray guidance and that reliable freehand CBT screw insertion based on anatomical landmarks is not reliably feasible in the lumbar spine.
RESUMEN
OBJECTIVE: Participation in a physical therapy program is considered one of the greatest predictors of successful conservative management of common shoulder disorders. However, adherence to these protocols is often poor and typically worse for unsupervised home exercise programs. Currently, there are limited tools available for objective measurement of adherence in the home setting. The goal of this study was to develop and evaluate the potential for performing home shoulder physiotherapy monitoring using a commercial smartwatch. APPROACH: Twenty healthy adult subjects with no prior shoulder disorders performed seven exercises from an evidence-based rotator cuff physiotherapy protocol, while 6-axis inertial sensor data was collected from the active extremity. Within an activity recognition chain (ARC) framework, four supervised learning algorithms were trained and optimized to classify the exercises: k-nearest neighbor (k-NN), random forest (RF), support vector machine classifier (SVC), and a convolutional recurrent neural network (CRNN). Algorithm performance was evaluated using 5-fold cross-validation stratified first temporally and then by subject. MAIN RESULTS: Categorical classification accuracy was above 94% for all algorithms on the temporally stratified cross validation, with the best performance achieved by the CRNN algorithm (99.4%). The subject stratified cross validation, which evaluated classifier performance on unseen subjects, yielded lower accuracies scores again with CRNN performing best (88.9%). SIGNIFICANCE: This proof of concept study demonstrates the technical feasibility of a smartwatch device and supervised machine learning approach to more easily monitor and assess the at-home adherence of shoulder physiotherapy exercise protocols.