Switching stiction and adhesion of a liquid on a solid.

When a gecko moves on a ceiling it makes use of adhesion and stiction. Stiction--static friction--is experienced on microscopic and macroscopic scales and is related to adhesion and sliding friction. Although important for most locomotive processes, the concepts of adhesion, stiction and sliding friction are often only empirically correlated. A more detailed understanding of these concepts will, for example, help to improve the design of increasingly smaller devices such as micro- and nanoelectromechanical switches. Here we show how stiction and adhesion are related for a liquid drop on a hexagonal boron nitride monolayer on rhodium, by measuring dynamic contact angles in two distinct states of the solid-liquid interface: a corrugated state in the absence of hydrogen intercalation and an intercalation-induced flat state. Stiction and adhesion can be reversibly switched by applying different electrochemical potentials to the sample, causing atomic hydrogen to be intercalated or not. We ascribe the change in adhesion to a change in lateral electric field of in-plane two-nanometre dipole rings, because it cannot be explained by the change in surface roughness known from the Wenzel model. Although the change in adhesion can be calculated for the system we study, it is not yet possible to determine the stiction at such a solid-liquid interface using ab initio methods. The inorganic hybrid of hexagonal boron nitride and rhodium is very stable and represents a new class of switchable surfaces with the potential for application in the study of adhesion, friction and lubrication.

Ambient Bistable Single Dipole Switching in a Molecular Monolayer.

Reported here is a molecular dipole that self-assembles into highly ordered patterns at the liquid-solid interface, and it can be switched at room temperature between a bright and a dark state at the single-molecule level. Using a scanning tunneling microscope (STM) under suitable bias conditions, binary information can be written at a density of up to 41 Tb cm-2 (256 Tb/in2 ). The written information is stable during reading at room temperature, but it can also be erased at will, instantly, by proper choice of tunneling conditions. DFT calculations indicate that the contrast and switching mechanism originate from the stacking sequence of the molecular dipole, which is reoriented by the electric field between the tip and substrate.

Reversible Anion-Driven Switching of an Organic 2D Crystal at a Solid-Liquid Interface.

Ionic self-assembly of charged molecular building blocks relies on the interplay between long-range electrostatic forces and short-range, often cooperative, supramolecular interactions, yet has been seldom studied in two dimensions at the solid-liquid interface. Here, we demonstrate anion-driven switching of two-dimensional (2D) crystal structure at the Au(111)/octanoic acid interface. Using scanning tunneling microscopy (STM), three organic salts with identical polyaromatic cation (PQPC6+ ) but different anions (perchlorate, anthraquinonedisulfonate, benzenesulfonate) are shown to form distinct, highly ordered self-assembled structures. Reversible switching of the supramolecular arrangement is demonstrated by in situ exchange of the anion on the pre-formed adlayer, by changing the concentration ratio between the incoming and outgoing anion. Density functional theory (DFT) calculations reveal that perchlorate is highly mobile in the adlayer, and corroborate why this anion is only resolved transiently in STM. Surprisingly, the templating effect of the anion persists even where it does not become part of the adlayer 2D fabric, which we ascribe to differences in stabilization of cation conformations by the anion. Our results provide important insight into the structuring of mixed anion-cation adlayers. This is essential in the design of tectons for ionic self-assembled superstructures and biomimetic adaptive materials and valuable also to understand adsorbate-adsorbate interactions in heterogeneous catalysis.

A large set of newly created interspecific Saccharomyces hybrids increases aromatic diversity in lager beers.

Lager beer is the most consumed alcoholic beverage in the world. Its production process is marked by a fermentation conducted at low (8 to 15°C) temperatures and by the use of Saccharomyces pastorianus, an interspecific hybrid between Saccharomyces cerevisiae and the cold-tolerant Saccharomyces eubayanus. Recent whole-genome-sequencing efforts revealed that the currently available lager yeasts belong to one of only two archetypes, "Saaz" and "Frohberg." This limited genetic variation likely reflects that all lager yeasts descend from only two separate interspecific hybridization events, which may also explain the relatively limited aromatic diversity between the available lager beer yeasts compared to, for example, wine and ale beer yeasts. In this study, 31 novel interspecific yeast hybrids were developed, resulting from large-scale robot-assisted selection and breeding between carefully selected strains of S. cerevisiae (six strains) and S. eubayanus (two strains). Interestingly, many of the resulting hybrids showed a broader temperature tolerance than their parental strains and reference S. pastorianus yeasts. Moreover, they combined a high fermentation capacity with a desirable aroma profile in laboratory-scale lager beer fermentations, thereby successfully enriching the currently available lager yeast biodiversity. Pilot-scale trials further confirmed the industrial potential of these hybrids and identified one strain, hybrid H29, which combines a fast fermentation, high attenuation, and the production of a complex, desirable fruity aroma.

Multicomponent self-assembly with a shape-persistent N-heterotriangulene macrocycle on Au(111).

Multicomponent network formation by using a shape-persistent macrocycle (MC6) at the interface between an organic liquid and Au(111) surface is demonstrated. MC6 serves as a versatile building block that can be coadsorbed with a variety of organic molecules based on different types of noncovalent interactions at the liquid-solid interface. Scanning tunneling microscopy (STM) reveals the formation of crystalline bicomponent networks upon codeposition of MC6 with aromatic molecules, such as fullerene (C60) and coronene. Tetracyanoquinodimethane, on the other hand, was found to induce disorder into the MC6 networks by adsorbing on the rim of the macrocycle. Immobilization of MC6 itself was studied in two different noncovalently assembled host networks. MC6 assumed a rather passive role as a guest and simply occupied the host cavities in one network, whereas it induced a structural transition in the other. Finally, the central cavity of MC6 was used to capture C60 in a complex three-component system. Precise immobilization of organic molecules at discrete locations within multicomponent networks, as demonstrated here, constitutes an important step towards bottom-up fabrication of functional surface-based nanostructures.

Squeezing, then stacking: from breathing pores to three-dimensional ionic self-assembly under electrochemical control.

We demonstrate the spontaneous and reversible transition between the two- and three-dimensional self-assembly of a supramolecular system at the solid-liquid interface under electrochemical conditions, using in situ scanning tunneling microscopy. By tuning the interfacial potential, we can selectively organize our target molecules in an open porous pattern, fill these pores to form an auto-host-guest structure, or stack the building blocks in a stratified bilayer. Using a simple electrostatic model, we rationalize which charge density is required to enable bilayer formation, and conversely, which molecular size/charge ratio is necessary in the design of new building blocks. Our results may lead to a new class of electrochemically controlled dynamic host-guest systems, artificial receptors, and smart materials.

Diazadithia[7]helicenes: Synthetic Exploration, Solid-State Structure, and Properties.

Diazadithia[7]helicenes were synthesized from the readily available building block ethyl 7-chloro-8-formylthieno[3,2-f]quinoline-2-carboxylate by a Wittig reaction-photocyclization strategy. The helicene core was functionalized by nucleophilic aromatic substitution with a variety of nucleophiles (e.g., O-, N-, and C-centered) and palladium-catalyzed reactions such as Suzuki coupling and Buchwald-Hartwig amination. Racemization studies confirmed that the enantiopure forms of these [7]helicenes are conformationally stable compared to their lower analogues. The solid-state structures of the novel diazadithia[7]helicenes were determined by single-crystal X-ray diffraction. The crystal structures of these azathia[7]helicenes show columnar stacking in antiparallel fashion. The HOMO-LUMO gaps of the new compounds were determined on the basis of electrochemical and optical measurements.

Spectroscopic Characterization of Thiacarbocyanine Dye Molecules Adsorbed on Hexagonal Boron Nitride: a Time-Resolved Study.

Physisorption on hexagonal boron nitride (hBN) gained interest over the years thanks to its properties (chemically and thermally stable, insulating properties, etc.) and similarities to the well-known graphene. A recent study showed flat-on adsorption of several cationic thiacarbocyanine dyes on hBN with a tendency to form weakly coupled H- or I-type aggregates, while a zwitterionic thiacarbocyanine dye rather led to a tilted adsorption. With this in-depth time-resolved study using the TC-SPC technique, we confirm the results proven by adsorption isotherms, atomic force microscopy, and stationary state spectroscopy combined with molecular mechanics simulations and estimation of the corresponding exciton interaction. The absence of a systematic trend for the dependence of the decay times, normalized amplitudes of the decay components, and contribution of different components to the stationary emission spectra upon the emission wavelength observed for all studied dyes and coverages suggests the occurrence of a single emitting species. At low coverage levels, the non-mono-exponential character of the decays was attributed to adsorption on different sites characterized by different intramolecular rotational freedom or energy transfer to nonfluorescent traps or a combination of both. The difference between the decay rates of the four dyes reflects a different density of the nonfluorescent traps. Although the decay time of the unquenched dyes was in the order of magnitude of that of dye monomers in a rigid environment, it is also compatible with weakly coupled aggregates such as proposed earlier based on the stationary spectra. Hence, the adsorption leads to a rigid environment of the dyes, blocking internal conversion. Increasing the concentration of the dye solution from which the adsorption on hBN occurs increases not only the coverage of the hBN surface but also the extent of energy transfer to nonfluorescent traps. For TDC (5,5-dichloro-3-3'-diethyl-9-ethyl-thiacarbocyanine) and TD2 (3-3'-diethyl-9-ethyl-thiacarbocyanine), besides direct energy transfer to traps, exciton hopping between dye dimers followed by energy transfer to these traps occurs, which resulted in a decreasing decay time of the longest decaying component. For all dyes, it was also possible to analyze the fluorescence decays as a stretched exponential as would be expected for energy transfer to randomly distributed traps in a two-dimensional (2D) geometry. This analysis yielded a fluorescence decay time of the unquenched dyes similar to the longest decay time obtained by analysis of the fluorescence decays as a sum of three of four exponentials.

Synergistic effect of p-type and n-type dopants in semiconductors for efficient electrocatalytic water splitting.

The main challenge for acidic water electrolysis is the lack of active and stable oxygen evolution catalysts based on abundant materials, which are globally scalable. Iridium oxide is the only material which is active and stable. However, Ir is extremely rare. While both active materials and stable materials exist, those that are active are usually not stable and vice versa. In this work, we present a new design strategy for activating stable materials originally deemed unsuitable due to a semiconducting nature and wide band gap energy. These stable semiconductors cannot change oxidation state under the relevant reaction conditions. Based on DFT calculations, we find that adding an n-type dopant facilitates oxygen binding on semiconductor surfaces. The binding is, however, strong and prevents further binding or desorption of oxygen. By combining both n-type and p-type dopants, the reactivity can be tuned so that oxygen can be adsorbed and desorbed under reaction conditions. The tuning results from the electrostatic interactions between the dopants as well as between the dopants and the binding site. This concept is experimentally verified on TiO2 by co-substituting with different pairs of n- and p-type dopants. Our findings suggest that the co-substitution approach can be used to activate stable materials, with no intrinsic oxygen evolution activity, to design new catalysts for acid water electrolysis.

From redox gating to quantized charging.

Electron transport characteristics were studied in redox molecule-modified tunneling junctions Au(111)/6-thiohexanoylferrocene (Fc6)/solution gap/Au STM tip in the absence and in the presence of gold nanoclusters employing an electrochemical STM setup. We observed transistor- and diode-like current-voltage responses accounted for by the redox process at the ferrocene moiety. We demonstrate that the reorganization energy of the redox site decreases with decreasing gap size. As a unique new feature, we discovered the formation of uniform (size approximately 2.4 nm) gold nanoparticles, upon multiple oxidation/reduction cycles of the Fc6 adlayer. The immobilized nanoparticles modify the electron transport response of the Fc6 tunneling junctions dramatically. On top of embedded single nanoparticles we observed single-electron Coulomb charging signatures with up to seven narrow and equally spaced energy states upon electrochemical gating. Our results demonstrate the power of the electrochemical approach in molecular electronics and offer a new perspective toward two-state and multistate electronic switching in condensed media at room temperature.

Dynamics of ionic liquid mediated quantised charging of monolayer-protected clusters.

We present the first kinetic study of quantised double layer charging of monolayer-protected gold clusters in an ionic liquid. Cyclic voltammetry and electrochemical impedance measurements reveal that kinetic control is involved in the quantised cluster charging in these room temperature melts. The level of kinetic control varies up to one order of magnitude depending on ionic liquid composition, which may have implications for the development of future nanoelectronic devices. By studying the quantised charging process in the chemically relevant permutations of two anions and two cations, we find strong indications that the ionic liquid behaviour is not a linear combination of its composing ions' properties, but is dominated by specific interactions. Based on a Walden plot analysis, we hypothesise that the chemical availability of ions is different in the various liquids, and explains the differences in monolayer-protected gold cluster (MPC) charging rates.

Reliable Computational Prediction of the Supramolecular Ordering of Complex Molecules under Electrochemical Conditions.

We propose a computationally lean, two-stage approach that reliably predicts self-assembly behavior of complex charged molecules on metallic surfaces under electrochemical conditions. Stage one uses ab initio simulations to provide reference data for the energies (evaluated for archetypical configurations) to fit the parameters of a conceptually much simpler and computationally less expensive force field of the molecules: classical, spherical particles, representing the respective atomic entities; a flat and perfectly conducting wall represents the metallic surface. Stage two feeds the energies that emerge from this force field into highly efficient and reliable optimization techniques to identify via energy minimization the ordered ground-state configurations of the molecules. We demonstrate the power of our approach by successfully reproducing, on a semiquantitative level, the intricate supramolecular ordering observed experimentally for PQP+ and ClO4- molecules at an Au(111)-electrolyte interface, including the formation of open-porous, self-host-guest, and stratified bilayer phases as a function of the electric field at the solid-liquid interface. We also discuss the role of the perchlorate ions in the self-assembly process, whose positions could not be identified in the related experimental investigations.

A Hands-On Guide to Brewing and Analyzing Beer in the Laboratory.

Beer would not exist without microbes. During fermentation, yeast cells convert cereal-derived sugars into ethanol and CO2 . Yeast also produces a wide array of aroma compounds that influence beer taste and aroma. The complex interaction between all these aroma compounds results in each beer having its own distinctive palette. This article contains all protocols needed to brew beer in a standard lab environment and focuses on the use of yeast in beer brewing. More specifically, it provides protocols for yeast propagation, brewing calculations and, of course, beer brewing. At the end, we have also included protocols for analyses that can be performed on the resulting brew, with a focus on yeast-derived aroma compounds. © 2019 The Authors.

Correction: Reducing phenolic off-flavors through CRISPR-based gene editing of the FDC1 gene in Saccharomyces cerevisiae x Saccharomyces eubayanus hybrid lager beer yeasts.

[This corrects the article DOI: 10.1371/journal.pone.0209124.].

Reducing phenolic off-flavors through CRISPR-based gene editing of the FDC1 gene in Saccharomyces cerevisiae x Saccharomyces eubayanus hybrid lager beer yeasts.

Today's beer market is challenged by a decreasing consumption of traditional beer styles and an increasing consumption of specialty beers. In particular, lager-type beers (pilsner), characterized by their refreshing and unique aroma and taste, yet very uniform, struggle with their sales. The development of novel variants of the common lager yeast, the interspecific hybrid Saccharomyces pastorianus, has been proposed as a possible solution to address the need of product diversification in lager beers. Previous efforts to generate new lager yeasts through hybridization of the ancestral parental species (S. cerevisiae and S. eubayanus) yielded strains with an aromatic profile distinct from the natural biodiversity. Unfortunately, next to the desired properties, these novel yeasts also inherited unwanted characteristics. Most notably is their phenolic off-flavor (POF) production, which hampers their direct application in the industrial production processes. Here, we describe a CRISPR-based gene editing strategy that allows the systematic and meticulous introduction of a natural occurring mutation in the FDC1 gene of genetically complex industrial S. cerevisiae strains, S. eubayanus yeasts and interspecific hybrids. The resulting cisgenic POF- variants show great potential for industrial application and diversifying the current lager beer portfolio.

Graphite and Graphene Fairy Circles: A Bottom-Up Approach for the Formation of Nanocorrals.

A convenient covalent functionalization approach and nanopatterning method of graphite and graphene is developed. In contrast to expectations, electrochemically activated dediazotization of a mixture of two aryl diazonium compounds in aqueous media leads to a spatially inhomogeneous functionalization of graphitic surfaces, creating covalently modified surfaces with quasi-uniform spaced islands of pristine graphite or graphene, coined nanocorrals. Cyclic voltammetry and chronoamperometry approaches are compared. The average diameter (45-130 nm) and surface density (20-125 corrals/µm2) of these nanocorrals are tunable. These chemically modified nanostructured graphitic (CMNG) surfaces are characterized by atomic force microscopy, scanning tunneling microscopy, Raman spectroscopy and microscopy, and X-ray photoelectron spectroscopy. Mechanisms leading to the formation of these CMNG surfaces are discussed. The potential of these surfaces to investigate supramolecular self-assembly and on-surface reactions under nanoconfinement conditions is demonstrated.

Interspecific hybridization facilitates niche adaptation in beer yeast.

Hybridization between species often leads to non-viable or infertile offspring, yet examples of evolutionarily successful interspecific hybrids have been reported in all kingdoms of life. However, many questions on the ecological circumstances and evolutionary aftermath of interspecific hybridization remain unanswered. In this study, we sequenced and phenotyped a large set of interspecific yeast hybrids isolated from brewing environments to uncover the influence of interspecific hybridization in yeast adaptation and domestication. Our analyses demonstrate that several hybrids between Saccharomyces species originated and diversified in industrial environments by combining key traits of each parental species. Furthermore, posthybridization evolution within each hybrid lineage reflects subspecialization and adaptation to specific beer styles, a process that was accompanied by extensive chimerization between subgenomes. Our results reveal how interspecific hybridization provides an important evolutionary route that allows swift adaptation to novel environments.

Origins, evolution, domestication and diversity of Saccharomyces beer yeasts.

Yeasts have been used for food and beverage fermentations for thousands of years. Today, numerous different strains are available for each specific fermentation process. However, the nature and extent of the phenotypic and genetic diversity and specific adaptations to industrial niches have only begun to be elucidated recently. In Saccharomyces, domestication is most pronounced in beer strains, likely because they continuously live in their industrial niche, allowing only limited genetic admixture with wild stocks and minimal contact with natural environments. As a result, beer yeast genomes show complex patterns of domestication and divergence, making both ale (S. cerevisiae) and lager (S. pastorianus) producing strains ideal models to study domestication and, more generally, genetic mechanisms underlying swift adaptation to new niches.

Self-Limiting Adsorption of WO3 Oligomers on Oxide Substrates in Solution.

Electrochemical surface science of oxides is an emerging field with expected high impact in developing, for instance, rationally designed catalysts. The aim in such catalysts is to replace noble metals by earth-abundant elements, yet without sacrificing activity. Gaining an atomic-level understanding of such systems hinges on the use of experimental surface characterization techniques such as scanning tunneling microscopy (STM), in which tungsten tips have been the most widely used probes, both in vacuum and under electrochemical conditions. Here, we present an in situ STM study with atomic resolution that shows how tungsten(VI) oxide, spontaneously generated at a W STM tip, forms 1D adsorbates on oxide substrates. By comparing the behavior of rutile TiO2(110) and magnetite Fe3O4(001) in aqueous solution, we hypothesize that, below the point of zero charge of the oxide substrate, electrostatics causes water-soluble WO3 to efficiently adsorb and form linear chains in a self-limiting manner up to submonolayer coverage. The 1D oligomers can be manipulated and nanopatterned in situ with a scanning probe tip. As WO3 spontaneously forms under all conditions of potential and pH at the tungsten-aqueous solution interface, this phenomenon also identifies an important caveat regarding the usability of tungsten tips in electrochemical surface science of oxides and other highly adsorptive materials.

Surface Structure of TiO2 Rutile (011) Exposed to Liquid Water.

The rutile TiO2(011) surface exhibits a (2 × 1) reconstruction when prepared by standard techniques in ultrahigh vacuum (UHV). Here we report that a restructuring occurs upon exposing the surface to liquid water at room temperature. The experiment was performed in a dedicated UHV system, equipped for direct and clean transfer of samples between UHV and liquid environment. After exposure to liquid water, an overlayer with a (2 × 1) symmetry was observed containing two dissociated water molecules per unit cell. The two OH groups yield an apparent "c(2 × 1)" symmetry in scanning tunneling microscopy (STM) images. On the basis of STM analysis and density functional theory (DFT) calculations, this overlayer is attributed to dissociated water on top of the unreconstructed (1 × 1) surface. Investigation of possible adsorption structures and analysis of the domain boundaries in this structure provide strong evidence that the original (2 × 1) reconstruction is lifted. Unlike the (2 × 1) reconstruction, the (1 × 1) surface has an appropriate density and symmetry of adsorption sites. The possibility of contaminant-induced restructuring was excluded based on X-ray photoelectron spectroscopy (XPS) and low-energy He+ ion scattering (LEIS) measurements.