RESUMEN
Photonic nanomaterials, characterized by their remarkable photonic tunability, empower a diverse range of applications, including cutting-edge advances in cancer nanomedicine. Recently, ferroptosis has emerged as a promising alternative strategy for effectively killing cancer cells with minimizing therapeutic resistance. Novel design of photonic nanomaterials that can integrate photoresponsive-ferroptosis inducers, -diagnostic imaging, and -synergistic components provide significant benefits to effectively trigger local ferroptosis. This review provides a comprehensive overview of recent advancements in photonic nanomaterials for image-guided ferroptosis cancer nanomedicine, offering insights into their strengths, constraints, and their potential as a future paradigm in cancer treatment.
RESUMEN
The precise and reversible detection of hydrogen sulfide (H2S) at high humidity condition, a malodorous and harmful volatile sulfur compound, is essential for the self-assessment of oral diseases, halitosis, and asthma. However, the selective and reversible detection of trace concentrations of H2S (≈0.1 ppm) in high humidity conditions (exhaled breath) is challenging because of irreversible H2S adsorption/desorption at the surface of chemiresistors. The study reports the synthesis of Fe-doped CuO hollow spheres as H2S gas-sensing materials via spray pyrolysis. 4 at.% of Fe-doped CuO hollow spheres exhibit high selectivity (response ratio ≥ 34.4) over interference gas (ethanol, 1 ppm) and reversible sensing characteristics (100% recovery) to 0.1 ppm of H2S under high humidity (relative humidity 80%) at 175 °C. The effect of multi-valent transition metal ion doping into CuO on sensor reversibility is confirmed through the enhancement of recovery kinetics by doping 4 at.% of Ti- or Nb ions into CuO sensors. Mechanistic details of these excellent H2S sensing characteristics are also investigated by analyzing the redox reactions and the catalytic activity change of the Fe-doped CuO sensing materials. The selective and reversible detection of H2S using the Fe-doped CuO sensor suggested in this work opens a new possibility for halitosis self-monitoring.
RESUMEN
Ferroptosis, an iron-dependent programmed cell death mechanism, is regulated by distinct molecular pathways of lipid peroxidation caused by intracellular iron supplementation and glutathione (GSH) synthesis inhibition. It has attracted a great deal of attention as a viable alternative to typical apoptosis-based cancer therapy that exhibits drug resistance. For efficient therapeutic utilization of such a unique and desirable mechanism, precise control using various stimuli to activate the administered nanocarriers is essential. Specific conditions in the tumor microenvironment (e.g., acidic pH, high level of ROS and GSH, hypoxia, etc.) can be exploited as endogenous stimuli to ensure high specificity of the tumor site. Maximized spatiotemporal controllability can be assured by utilizing external energy sources (e.g., magnetic fields, ultrasound, microwaves, light, etc.) as exogenous stimuli that can provide on-demand remote controllability for customized deep tumor therapy with a low inter-patient variation. Strikingly, the utilization of dual endogenous and/or exogenous stimuli provides a new direction for efficient cancer therapy. This review highlights recent advances in the utilization of various endogenous and exogenous stimuli to activate the reactions of nanocarriers for ferroptosis-based cancer therapy that can inspire the field of cancer therapy, particularly for the treatment of intractable tumors.
Asunto(s)
Ferroptosis , Neoplasias , Humanos , Neoplasias/tratamiento farmacológico , Apoptosis , Hierro/metabolismo , Microambiente TumoralRESUMEN
Native extracellular matrix (ECM) exhibits dynamic change in the ligand position. Herein, the ECM-emulating control and real-time monitoring of stem cell differentiation are demonstrated by ligand nanoassembly. The density of gold nanoassembly presenting cell-adhesive Arg-Gly-Asp (RGD) ligand on Fe3 O4 (magnetite) nanoparticle in nanostructures flexibly grafted to material is changed while keeping macroscale ligand density invariant. The ligand nanoassembly on the Fe3 O4 can be magnetically attracted to mediate rising and falling ligand movements via linker stretching and compression, respectively. High ligand nanoassembly density stimulates integrin ligation to activate the mechanosensing-assisted stem cell differentiation, which is monitored via in situ real-time electrochemical sensing. Magnetic control of rising and falling ligand movements hinders and promotes the adhesion-mediated mechanotransduction and differentiation of stem cells, respectively. These rising and falling ligand states yield the difference in the farthest distance (≈34.6 nm) of the RGD from material surface, thereby dynamically mimicking static long and short flexible linkers, which hinder and promote cell adhesion, respectively. Design of cytocompatible ligand nanoassemblies can be made with combinations of dimensions, shapes, and biomimetic ligands for remotely regulating stem cells for offering novel methodologies to advance regenerative therapies.
Asunto(s)
Fenómenos Magnéticos , Mecanotransducción Celular , Adhesión Celular , Diferenciación Celular , LigandosRESUMEN
Macrophages can associate with extracellular matrix (ECM) demonstrating nanosequenced cell-adhesive RGD ligand. In this study, we devised barcoded materials composed of RGD-coated gold and RGD-absent iron nanopatches to show various frequencies and position of RGD-coated nanopatches with similar areas of iron and RGD-gold nanopatches that maintain macroscale and nanoscale RGD density invariant. Iron patches were used for substrate coupling. Both large (low frequency) and externally positioned RGD-coated nanopatches stimulated robust attachment in macrophages, compared with small (high frequency) and internally positioned RGD-coated nanopatches, respectively, which mediate their regenerative/anti-inflammatory M2 polarization. The nanobarcodes exhibited stability in vivo. We shed light into designing ligand-engineered nanostructures in an external position to facilitate host cell attachment, thereby eliciting regenerative host responses.
Asunto(s)
Macrófagos , Oligopéptidos , Antiinflamatorios , Adhesión Celular , Oro/farmacología , Ligandos , Oligopéptidos/farmacologíaRESUMEN
Developing materials with remote controllability of macroscale ligand presentation can mimic extracellular matrix (ECM) remodeling to regulate cellular adhesion in vivo. Herein, we designed charged mobile nanoligands with superparamagnetic nanomaterials amine-functionalized and conjugated with polyethylene glycol linker and negatively charged RGD ligand. We coupled negatively a charged nanoligand to a positively charged substrate by optimizing electrostatic interactions to allow reversible planar movement. We demonstrate the imaging of both macroscale and in situ nanoscale nanoligand movement by magnetically attracting charged nanoligand to manipulate macroscale ligand density. We show that in situ magnetic control of attracting charged nanoligand facilitates stem cell adhesion, both in vitro and in vivo, with reversible control. Furthermore, we unravel that in situ magnetic attraction of charged nanoligand stimulates mechanosensing-mediated differentiation of stem cells. This remote controllability of ECM-mimicking reversible ligand variations is promising for regulating diverse reparative cellular processes in vivo.
Asunto(s)
Adhesión Celular , Fenómenos Magnéticos , Oligopéptidos , Células Madre , Diferenciación Celular , Matriz ExtracelularRESUMEN
Auricular cartilage reconstruction represents one of the greatest challenges for otolaryngology-head and neck surgery. The native structure and composition of the auricular cartilage can be achieved by combining a suitable chondrogenic cell source with an appropriate scaffold. In reconstructive surgery for cartilage tissue, autogenous cartilage is considered to be the best chondrogenic cell source. Polycaprolactone is mainly used as a tissue-engineered scaffold owing to its mechanical properties, miscibility with a large range of other polymers, and biodegradability. In this study, scaffolds with or without autogenous minced auricular cartilage were implanted bilaterally in rabbits for auricular regeneration. Six weeks (n = 4) and 16 weeks (n = 4) after implantation, real-time quantitative reverse transcription polymerase chain reaction and histology were used to assess the regeneration of the auricular cartilage. Quantitative reverse transcription polymerase chain reaction analysis revealed that the messenger RNA expression of aggrecan, collagen I, and collagen II was higher in scaffolds with 50% minced cartilage than the scaffold-only groups or scaffolds with 30% minced cartilage (P < 0.05). Furthermore, histological analysis demonstrated significantly superior cartilage regeneration in scaffolds with the minced cartilage group compared with the scaffold-only and control groups (P < 0.05). Autogenous cartilage can be easily obtained and loaded onto a scaffold to promote the presence of chondrogenic cells, allowing for an improvement of the reconstruction of auricular cartilage. Here, the regeneration of auricular cartilage was also successful in the 50% minced cartilage group. The results presented in this study could have clinical implications, as they demonstrate the potential of a 1-stage process for auricular reconstruction.
Asunto(s)
Condrocitos , Cartílago Auricular , Animales , Condrogénesis , Impresión Tridimensional , Conejos , Ingeniería de Tejidos , Andamios del TejidoRESUMEN
Metallic metamaterials with positive dielectric responses are promising as an alternative to dielectrics for the generation of Cerenkov radiation [J.-K. So et al., Appl. Phys. Lett. 97(15), 151107 (2010)]. We propose here by theoretical analysis a mechanism to couple out Cerenkov radiation from the slab surfaces in the transverse direction. The proposed method based on Brillouin-zone folding is to periodically modify the thickness of the metamaterial slab in the axial direction. Moreover, the intensity of the surface-coupled radiation by this mechanism shows an order-of-magnitude enhancement compared to that of ordinary Smith-Purcell radiation.
RESUMEN
Ferroptosis offers a novel method for overcoming therapeutic resistance of cancers to conventional cancer treatment regimens. Its effective use as a cancer therapy requires a precisely targeted approach, which can be facilitated by using nanoparticles and nanomedicine, and their use to enhance ferroptosis is indeed a growing area of research. While a few review papers have been published on iron-dependent mechanism and inducers of ferroptosis cancer therapy that partly covers ferroptosis nanoparticles, there is a need for a comprehensive review focusing on the design of magnetic nanoparticles that can typically supply iron ions to promote ferroptosis and simultaneously enable targeted ferroptosis cancer nanomedicine. Furthermore, magnetic nanoparticles can locally induce ferroptosis and combinational ferroptosis with diagnostic magnetic resonance imaging (MRI). The use of remotely controllable magnetic nanocarriers can offer highly effective localized image-guided ferroptosis cancer nanomedicine. Here, recent developments in magnetically manipulable nanocarriers for ferroptosis cancer nanomedicine with medical imaging are summarized. This review also highlights the advantages of current state-of-the-art image-guided ferroptosis cancer nanomedicine. Finally, image guided combinational ferroptosis cancer therapy with conventional apoptosis-based therapy that enables synergistic tumor therapy is discussed for clinical translations.
RESUMEN
The boron neutron capture therapy (BNCT) system developed by the Korea Institute of Radiological and Medical Sciences is a compact neutron source that can be installed at medical institutes. The target energy was accelerated to a maximum of 2.4 MeV-20 mA by introducing a gas stripping device that converts negative hydrogen ions into positive ions. By using the tandem-type accelerator in this way, a high-voltage DC power supply was designed with 1.2 MV-45 mA as the maximum capability. The design was improved to reduce the number of stages of a Cockcroft-Walton voltage multiplier. Hence, the ripple risk of the DC flat top resulting from unwanted stray capacitance was lowered. The overall height and volume of the Cockcroft-Walton voltage multiplier were reduced to less than half those of the existing design method, making miniaturization possible. After such advanced design and manufacturing, performance tests were performed at 750 kV-45 mA under 23 stages of the Cockcroft-Walton voltage multiplier, which is the highest level that can perform at its maximum under in-air conditions. It demonstrated stable performance under in-air conditions without breakdown for 2 h, even at 620 kV-35 mA. To reach the final target of 1.2 MV-45 mA, the groundwork is laid for achieving experimental performance while satisfying the optimal requirements in SF6 gas.
RESUMEN
To build a proton beam accelerator that can be applied to a boron neutron capture therapy system based on an electrostatic accelerator, a high-voltage direct-current (DC) power supply system equivalent to the generation of neutrons should be provided. The symmetrical Cockcroft-Walton voltage multiplier method is suitable for stable acceleration of the proton beam in the tandem electrostatic accelerator in this system. Before the second step-up with the Cockcroft-Walton circuit, the design of the inverter is prioritized by preponderantly considering the first voltage and resonance frequency. Moreover, the optimized stacking number is determined with consideration of the ripple voltage, voltage drop, average output voltage, and fundamental harmonics, and a design is performed to set related parameter values to be stable in the flat-top region of the voltage. A high-voltage DC power supply system of 1.2 MV/45 mA is needed for a stable terminal energy of 2.4 MeV/20 mA. Such a design can be optimized by securing reliable data using a simulation tool on the basis of theoretical calculations. This will become a formidable touchstone in manufacturing technology based on acquiring practical know-how for setting up a tandem electrostatic accelerator-based boron neutron capture therapy system in the future.
Asunto(s)
Terapia por Captura de Neutrón de Boro , Simulación por Computador , Suministros de Energía Eléctrica , Neutrones , Aceleradores de Partículas , Electricidad EstáticaRESUMEN
In native microenvironment, diverse physical barriers exist to dynamically modulate stem cell recruitment and differentiation for tissue repair. In this study, nanoassembly-based magnetic screens of various sizes are utilized, and they are elastically tethered over an RGD ligand (cell-adhesive motif)-presenting material surface to generate various nanogaps between the screens and the RGDs without modulating the RGD density. Large screens exhibiting low RGD distribution stimulate integrin clustering to facilitate focal adhesion, mechanotransduction, and differentiation of stem cells, which are not observed with small screens. Magnetic downward pulling of the large screens decreases the nanogaps, which dynamically suppress the focal adhesion, mechanotransduction, and differentiation of stem cells. Conversely, magnetic upward pulling of the small screens increases the nanogaps, which dynamically activates focal adhesion, mechanotransduction, and differentiation of stem cells. This regulation mechanism is also shown to be effective in the microenvironment in vivo. Further diversifying the geometries of the physical screens can further enable diverse modalities of multifaceted and safe unscreening of the distributed RGDs to unravel and modulate stem cell differentiation for tissue repair.
Asunto(s)
Fenómenos Magnéticos , Mecanotransducción Celular , Adhesión Celular , Diferenciación Celular , LigandosRESUMEN
Cell adhesion occurs when integrin recognizes and binds to Arg-Gly-Asp (RGD) ligands present in fibronectin. In this work, submolecular ligand size and spacing are tuned via template-mediated in situ growth of nanoparticles for dynamic macrophage modulation. To tune liganded gold nanoparticle (GNP) size and spacing from 3 to 20 nm, in situ localized assemblies of GNP arrays on nanomagnetite templates are engineered. 3 nm-spaced ligands stimulate the binding of integrin, which mediates macrophage-adhesion-assisted pro-regenerative polarization as compared to 20 nm-spaced ligands, which can be dynamically anchored to the substrate for stabilizing integrin binding and facilitating dynamic macrophage adhesion. Increasing the ligand size from 7 to 20 nm only slightly promotes macrophage adhesion, not observed with 13 nm-sized ligands. Increasing the ligand spacing from 3 to 17 nm significantly hinders macrophage adhesion that induces inflammatory polarization. Submolecular tuning of ligand spacing can dominantly modulate host macrophages.
Asunto(s)
Oro , Nanopartículas del Metal , Adhesión Celular , Fibronectinas , Integrinas/metabolismo , LigandosRESUMEN
Dynamic manipulation of supramolecular self-assembled structures is achieved irreversibly or under non-physiological conditions, thereby limiting their biomedical, environmental, and catalysis applicability. In this study, microgels composed of azobenzene derivatives stacked via π-cation and π-π interactions are developed that are electrostatically stabilized with Arg-Gly-Asp (RGD)-bearing anionic polymers. Lateral swelling of RGD-bearing microgels occurs via cis-azobenzene formation mediated by near-infrared-light-upconverted ultraviolet light, which disrupts intermolecular interactions on the visible-light-absorbing upconversion-nanoparticle-coated materials. Real-time imaging and molecular dynamics simulations demonstrate the deswelling of RGD-bearing microgels via visible-light-mediated trans-azobenzene formation. Near-infrared light can induce in situ swelling of RGD-bearing microgels to increase RGD availability and trigger release of loaded interleukin-4, which facilitates the adhesion structure assembly linked with pro-regenerative polarization of host macrophages. In contrast, visible light can induce deswelling of RGD-bearing microgels to decrease RGD availability that suppresses macrophage adhesion that yields pro-inflammatory polarization. These microgels exhibit high stability and non-toxicity. Versatile use of ligands and protein delivery can offer cytocompatible and photoswitchable manipulability of diverse host cells.
Asunto(s)
Microgeles , MacrófagosRESUMEN
Native extracellular matrix (ECM) can exhibit cyclic nanoscale stretching and shrinking of ligands to regulate complex cell-material interactions. Designing materials that allow cyclic control of changes in intrinsic ligand-presenting nanostructures in situ can emulate ECM dynamicity to regulate cellular adhesion. Unprecedented remote control of rapid, cyclic, and mechanical stretching ("ON") and shrinking ("OFF") of cell-adhesive RGD ligand-presenting magnetic nanocoils on a material surface in five repeated cycles are reported, thereby independently increasing and decreasing ligand pitch in nanocoils, respectively, without modulating ligand-presenting surface area per nanocoil. It is demonstrated that cyclic switching "ON" (ligand nanostretching) facilitates time-regulated integrin ligation, focal adhesion, spreading, YAP/TAZ mechanosensing, and differentiation of viable stem cells, both in vitro and in vivo. Fluorescence resonance energy transfer (FRET) imaging reveals magnetic switching "ON" (stretching) and "OFF" (shrinking) of the nanocoils inside animals. Versatile tuning of physical dimensions and elements of nanocoils by regulating electrodeposition conditions is also demonstrated. The study sheds novel insight into designing materials with connected ligand nanostructures that exhibit nanocoil-specific nano-spaced declustering, which is ineffective in nanowires, to facilitate cell adhesion. This unprecedented, independent, remote, and cytocompatible control of ligand nanopitch is promising for regulating the mechanosensing-mediated differentiation of stem cells in vivo.
Asunto(s)
Diferenciación Celular/efectos de los fármacos , Fenómenos Mecánicos , Nanoestructuras , Células Madre/citología , Células Madre/efectos de los fármacos , Adhesión Celular , Humanos , Ligandos , Factores de TiempoRESUMEN
Transmission of electromagnetic waves through thick perfect conducting slabs perforated by one-dimensional arrays of rectangular holes was studied experimentally in the microwave frequency range. The observed thickness-dependent transmission clearly exhibits the evanescent and propagating nature of the involved electromagnetic excitations on the considered structures, which are effective surface plasmons and localized waveguide resonances, respectively. The 1D crystals showing transmission based on localized resonances further manifests the frequency-dependent effective refractive index depending on the filling ratio of the holes and accompanies resonant guided wave propagation.
Asunto(s)
Modelos Teóricos , Refractometría/instrumentación , Resonancia por Plasmón de Superficie/instrumentación , Simulación por Computador , Diseño Asistido por Computadora , Cristalización , Campos Electromagnéticos , Diseño de Equipo , Análisis de Falla de Equipo , Reproducibilidad de los Resultados , Dispersión de Radiación , Sensibilidad y EspecificidadRESUMEN
Versatile high-power pulsed electron-beam accelerators that meet the requirements of pulsed high-power specifications are needed for appropriate applications in medical industry, defense, and other industries. The pulsed electron beam accelerator comprising a Marx generator and Blumlein pulse forming line (PFL) is designed to accelerate the electron beams at the level of 1 MeV when electrostatically discharging. The performance specifications of Marx generators consisting of a 100 kV DC power supply, R-L-C circuit, and high voltage switch are at a maximum 800 kV. At this time, by using the capacitance mismatching principle between the Marx generator and the Blumlein PFL under the law of preserving the amount of charge, it is possible to generate a high voltage in the form of a square pulse up to about 1.1 MV, as much as 1.37 times the charged voltage of the Marx generator. As a result, energy transmission from the Marx generator with a high efficiency of about 85% to the Blumlein PFL is possible. The aim of this study is that the pulsed high-power electron-beam accelerator can be used to change the diode impedance, and the energy of the accelerated electron beam reaches a level of 1 MeV with the square pulse width of about 100 ns at the flat-top in the range of relativistic electron beam generation. Performance tests were securely carried out by installing a dummy load based on CuSO4 solution varying the diode impedance to deter damage to the circuit by preventing reflected waves from being generated in the load.
RESUMEN
The native extracellular matrix (ECM) can exhibit heterogeneous nano-sequences periodically displaying ligands to regulate complex cell-material interactions in vivo. Herein, an ECM-emulating heterogeneous barcoding system, including ligand-bearing Au and ligand-free Fe nano-segments, is developed to independently present tunable frequency and sequences in nano-segments of cell-adhesive RGD ligand. Specifically, similar exposed surface areas of total Fe and Au nano-segments are designed. Fe segments are used for substrate coupling of nanobarcodes and as ligand-free nano-segments and Au segments for ligand coating while maintaining both nanoscale (local) and macroscale (total) ligand density constant in all groups. Low nano-ligand frequency in the same sequences and terminally sequenced nano-ligands at the same frequency independently facilitate focal adhesion and mechanosensing of stem cells, which are collectively effective both in vitro and in vivo, thereby inducing stem cell differentiation. The Fe/RGD-Au nanobarcode implants exhibit high stability and no local and systemic toxicity in various tissues and organs in vivo. This work sheds novel insight into designing biomaterials with heterogeneous nano-ligand sequences at terminal sides and/or low frequency to facilitate cellular adhesion. Tuning the electrodeposition conditions can allow synthesis of unlimited combinations of ligand nano-sequences and frequencies, magnetic elements, and bioactive ligands to remotely regulate numerous host cells in vivo.
Asunto(s)
Adhesión Celular/efectos de los fármacos , Diferenciación Celular/efectos de los fármacos , Nanotecnología/métodos , Células Madre/citología , Células Madre/efectos de los fármacos , Línea Celular , Matriz Extracelular/efectos de los fármacos , Matriz Extracelular/metabolismo , Oro/química , Humanos , Hierro/química , Ligandos , Oligopéptidos/química , Oligopéptidos/farmacologíaRESUMEN
Non-thermal irreversible electroporation (NTIRE) to avoid thermal damage to cells during intense DC ns pulsed electric fields (nsPEFs) is a recent modality for medical applications. This mechanism, related to bioelectrical dynamics of the cell, is linked to the effect of a DC electric field and a threshold effect with an electrically stimulated membrane for the charge distribution in the cell. To create the NTIRE condition, the pulse width of the nsPEF should be shorter than the charging time constant of the membrane related to the cell radius, membrane capacitance, cytoplasm resistivity, and medium resistivity. It is necessary to design and fabricate a very intense nanosecond DC electric field pulser that is capable of producing voltages up to the level of 100 kV/cm with an artificial pulse width (â¼ns) with controllable repetition rates. Many devices to generate intense DC nsPEF using various pulse-forming line technologies have been introduced thus far. However, the previous Blumlein pulse-generating devices are clearly inefficient due to the energy loss between the input voltage and the output voltage. An improved two-stage stacked Blumlein pulse-forming line can overcome this limitation and decrease the energy loss from a DC power supply. A metal oxide silicon field-effect transistor switch with a fast rise and fall time would enable a high repetition rate (max. 100 kHz) and good endurance against very high voltages (DC â¼ 30 kV). The load is designed to match the sample for exposure to cell suspensions consisting of a 200 Ω resistor matched with a Blumlein circuit and two electrodes without the characteristic RC time effect of the circuit (capacitance =0.174 pF).
RESUMEN
OBJECTIVES: The aim of this study was to develop a new method to measure the polymerization shrinkage of light cured composites and to evaluate the overall utility and significance of the technique. METHODS: An optical instrument to measure the linear polymerization shrinkage of composites without directly contacting the specimen was developed using a particle tracking method with computer vision. The measurement system consisted of a CCD color video camera, a lens, an image storage device, and image processing and analysis software. The shrinkage kinetics of a commercial silorane-based composite (P90) and two conventional methacrylate-based composites (Z250 and a flowable Z350) were investigated and compared with the data measured using the "bonded disc method". RESULTS: The linear shrinkage of the composites was 0.33-1.41%. The shrinkage value was lowest for the silorane-based (P90) composite and highest for the flowable Z350 composite. The estimated volume shrinkages of the materials were comparable to the axial shrinkages measured with the bonded disc method. SIGNIFICANCE: The new instrument was able to measure the true linear shrinkage of composites without sensitivity to the specimen geometry and the viscosity of the material. Therefore, this instrument can be used to characterize the shrinkage kinetics for a wide range of commercial and experimental visible-light-cure materials in relation to the composition and chemistry.