Design, synthesis, and characterization of protein origami based on self-assembly of a brick and staple artificial protein pair.

A versatile strategy to create an inducible protein assembly with predefined geometry is demonstrated. The assembly is triggered by a binding protein that staples two identical protein bricks together in a predictable spatial conformation. The brick and staple proteins are designed for mutual directional affinity and engineered by directed evolution from a synthetic modular repeat protein library. As a proof of concept, this article reports on the spontaneous, extremely fast and quantitative self-assembly of two designed alpha-repeat (αRep) brick and staple proteins into macroscopic tubular superhelices at room temperature. Small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM with staining agent and cryoTEM) elucidate the resulting superhelical arrangement that precisely matches the a priori intended 3D assembly. The highly ordered, macroscopic biomolecular construction sustains temperatures as high as 75 °C thanks to the robust αRep building blocks. Since the α-helices of the brick and staple proteins are highly programmable, their design allows encoding the geometry and chemical surfaces of the final supramolecular protein architecture. This work opens routes toward the design and fabrication of multiscale protein origami with arbitrarily programmed shapes and chemical functions.

Structural convergence for tubulin binding of CPAP and vinca domain microtubule inhibitors.

Microtubule dynamics is regulated by various cellular proteins and perturbed by small-molecule compounds. To what extent the mechanism of the former resembles that of the latter is an open question. We report here structures of tubulin bound to the PN2-3 domain of CPAP, a protein controlling the length of the centrioles. We show that an α-helix of the PN2-3 N-terminal region binds and caps the longitudinal surface of the tubulin ß subunit. Moreover, a PN2-3 N-terminal stretch lies in a ß-tubulin site also targeted by fungal and bacterial peptide-like inhibitors of the vinca domain, sharing a very similar binding mode with these compounds. Therefore, our results identify several characteristic features of cellular partners that bind to this site and highlight a structural convergence of CPAP with small-molecule inhibitors of microtubule assembly.

Biosynthetic proteins targeting the SARS-CoV-2 spike as anti-virals.

The binding of the SARS-CoV-2 spike to angiotensin-converting enzyme 2 (ACE2) promotes virus entry into the cell. Targeting this interaction represents a promising strategy to generate antivirals. By screening a phage-display library of biosynthetic protein sequences build on a rigid alpha-helicoidal HEAT-like scaffold (named αReps), we selected candidates recognizing the spike receptor binding domain (RBD). Two of them (F9 and C2) bind the RBD with affinities in the nM range, displaying neutralisation activity in vitro and recognizing distinct sites, F9 overlapping the ACE2 binding motif. The F9-C2 fusion protein and a trivalent αRep form (C2-foldon) display 0.1 nM affinities and EC50 of 8-18 nM for neutralization of SARS-CoV-2. In hamsters, F9-C2 instillation in the nasal cavity before or during infections effectively reduced the replication of a SARS-CoV-2 strain harbouring the D614G mutation in the nasal epithelium. Furthermore, F9-C2 and/or C2-foldon effectively neutralized SARS-CoV-2 variants (including delta and omicron variants) with EC50 values ranging from 13 to 32 nM. With their high stability and their high potency against SARS-CoV-2 variants, αReps provide a promising tool for SARS-CoV-2 therapeutics to target the nasal cavity and mitigate virus dissemination in the proximal environment.

Engineering of brick and staple components for ordered assembly of synthetic repeat proteins.

Synthetic ɑRep repeat proteins are engineered as Brick and Staple protein pairs that together self-assemble into helical filaments. In most cases, the filaments spontaneously form supercrystals. Here, we describe an expanded series of ɑRep Bricks designed to stabilize the interaction between consecutive Bricks, to control the length of the assembled multimers, or to alter the spatial distribution of the Staple on the filaments. The effects of these Brick modifications on the assembly, on the final filament structure and on the crystal symmetry are analyzed by biochemical methods, electron microscopy and small angle X-ray scattering. We further extend the concept of Brick/Staple protein origami by designing a new type of "Janus"-like Brick protein that is equally assembled by orthogonal staples binding its inner or outer surfaces and thus ending inside or outside the filaments. The relative roles of longitudinal and lateral associations in the assembly process are discussed. This set of results demonstrates important proofs-of-principle for engineering these remarkably versatile proteins toward nanometer-to-micron scale constructions.

A unique, newly discovered four-member protein family involved in extracellular fatty acid binding in Yarrowia lipolytica.

BACKGROUND: Yarrowia lipolytica, a nonconventional oleaginous yeast species, has attracted attention due to its high lipid degradation and accumulation capacities. Y. lipolytica is used as a chassis for the production of usual and unusual lipids and lipid derivatives. While the genes involved in the intracellular transport and activation of fatty acids in different cellular compartments have been characterized, no genes involved in fatty acid transport from the extracellular medium into the cell have been identified thus far. In this study, we identified secreted proteins involved in extracellular fatty acid binding. RESULTS: Recent analysis of the Y. lipolytica secretome led to the identification of a multigene family that encodes four secreted proteins, preliminarily named UP1 to UP4. These proteins were efficiently overexpressed individually in wild-type and multideletant strain (Q4: Δup1Δup2Δup3Δup4) backgrounds. Phenotypic analysis demonstrated the involvement of these proteins in the binding of extracellular fatty acids. Additionally, gene deletion and overexpression prevented and promoted sensitivity to octanoic acid (C8) toxicity, respectively. The results suggested binding is dependent on aliphatic chain length and fatty acid concentration. 3D structure modeling supports the proteins' role in fatty acid assimilation at the molecular level. CONCLUSIONS: We discovered a family of extracellular-fatty-acid-binding proteins in Y. lipolytica and have proposed to name its members eFbp1 to eFbp4. The exact mode of eFbps action remains to be deciphered individually and synergistically; nevertheless, it is expected that the proteins will have applications in lipid biotechnology, such as improving fatty acid production and/or bioconversion.

Insight into microtubule nucleation from tubulin-capping proteins.

Nucleation is one of the least understood steps of microtubule dynamics. It is a kinetically unfavorable process that is templated in the cell by the γ-tubulin ring complex or by preexisting microtubules; it also occurs in vitro from pure tubulin. Here we study the nucleation inhibition potency of natural or artificial proteins in connection with their binding mode to the longitudinal surface of α- or ß-tubulin. The structure of tubulin-bound CopN, a Chlamydia protein that delays nucleation, suggests that this protein may interfere with two protofilaments at the (+) end of a nucleus. Designed ankyrin repeat proteins that share a binding mode similar to that of CopN also impede nucleation, whereas those that target only one protofilament do not. In addition, an αRep protein predicted to target two protofilaments at the (-) end does not delay nucleation, pointing to different behaviors at both ends of the nucleus. Our results link the interference with protofilaments at the (+) end and the inhibition of nucleation.

An Artificial Hemoprotein with Inducible Peroxidase- and Monooxygenase-Like Activities.

A novel inducible artificial metalloenzyme obtained by covalent attachment of a manganese(III)-tetraphenylporphyrin (MnTPP) to the artificial bidomain repeat protein, (A3A3')Y26C, is reported. The protein is part of the αRep family. The biohybrid was fully characterized by MALDI-ToF mass spectrometry, circular dichroism and UV/Vis spectroscopies. The peroxidase and monooxygenase activities were evaluated on the original and modified scaffolds including those that have a) an additional imidazole, b) a specific αRep bA3-2 that is known to induce the opening of the (A3A3') interdomain region and c) a derivative of the αRep bA3-2 inducer extended with a His6 -Tag (His6 -bA3-2). Catalytic profiles are highly dependent on the presence of co-catalysts with the best activity obtained with His6 -bA3-2. The entire mechanism was rationalized by an integrative molecular modeling study that includes protein-ligand docking and large-scale molecular dynamics. This constitutes the first example of an entirely artificial metalloenzyme with inducible peroxidase and monooxygenase activities, reminiscent of allosteric regulation of natural enzymatic pathways.

Alpha repeat proteins (αRep) as expression and crystallization helpers.

We have previously described a highly diverse library of artificial repeat proteins based on thermostable HEAT-like repeats, named αRep. αReps binding specifically to proteins difficult to crystallize have been selected and in several examples, they made possible the crystallization of these proteins. To further simplify the production and crystallization experiments we have explored the production of chimeric proteins corresponding to covalent association between the targets and their specific binders strengthened by a linker. Although chimeric proteins with expression partners are classically used to enhance expression, these fusions cannot usually be used for crystallization. With specific expression partners like a cognate αRep this is no longer true, and chimeric proteins can be expressed purified and crystallized. αRep selection by phage display suppose that at least a small amount of the target protein should be produced to be used as a bait for selection and this might, in some cases, be difficult. We have therefore transferred the αRep library in a new construction adapted to selection by protein complementation assay (PCA). This new procedure allows to select specific binders by direct interaction with the target in the cytoplasm of the bacteria and consequently does not require preliminary purification of target protein. αRep binders selected by PCA or by phage display can be used to enhance expression, stability, solubility and crystallogenesis of proteins that are otherwise difficult to express, purify and/or crystallize.

αRep A3: A Versatile Artificial Scaffold for Metalloenzyme Design.

αRep refers to a new family of artificial proteins based on a thermostable α-helical repeated motif. One of its members, αRep A3, forms a stable homo-dimer with a wide cleft that is able to accommodate metal complexes and thus appears to be suitable for generating new artificial biocatalysts. Based on the crystal structure of αRep A3, two positions (F119 and Y26) were chosen, and independently changed into cysteine residues. A phenanthroline ligand was covalently attached to the unique cysteine residue of each protein variant, and the corresponding biohybrids were purified and characterized. Once mutated and coupled to phenanthroline, the protein remained folded and dimeric. Copper(II) was specifically bound by the two biohybrids with two different binding modes. Furthermore, the holo-biohybrid A3F119NPH was found to be capable of enantioselectively catalyzing Diels-Alder (D-A) cycloadditions with up to 62 % ee. This study validates the choice of the αRep A3 dimer as a protein scaffold and provides a promising new route for the design and production of new enantioselective biohybrids based on entirely artificial proteins obtained from a highly diverse library.

The unexpected structure of the designed protein Octarellin V.1 forms a challenge for protein structure prediction tools.

Despite impressive successes in protein design, designing a well-folded protein of more 100 amino acids de novo remains a formidable challenge. Exploiting the promising biophysical features of the artificial protein Octarellin V, we improved this protein by directed evolution, thus creating a more stable and soluble protein: Octarellin V.1. Next, we obtained crystals of Octarellin V.1 in complex with crystallization chaperons and determined the tertiary structure. The experimental structure of Octarellin V.1 differs from its in silico design: the (αßα) sandwich architecture bears some resemblance to a Rossman-like fold instead of the intended TIM-barrel fold. This surprising result gave us a unique and attractive opportunity to test the state of the art in protein structure prediction, using this artificial protein free of any natural selection. We tested 13 automated webservers for protein structure prediction and found none of them to predict the actual structure. More than 50% of them predicted a TIM-barrel fold, i.e. the structure we set out to design more than 10years ago. In addition, local software runs that are human operated can sample a structure similar to the experimental one but fail in selecting it, suggesting that the scoring and ranking functions should be improved. We propose that artificial proteins could be used as tools to test the accuracy of protein structure prediction algorithms, because their lack of evolutionary pressure and unique sequences features.

The αRep artificial repeat protein scaffold: a new tool for crystallization and live cell applications.

We have designed a new family of artificial proteins, named αRep, based on HEAT (acronym for Huntingtin, elongation factor 3 (EF3), protein pphosphatase 2A (PP2A), yeast kinase Tor1) repeat proteins containing an α-helical repeated motif. The sequence of the repeated motifs, first identified in a thermostable archae protein was optimized using a consensus design strategy and used for the construction of a library of artificial proteins. All proteins from this library share the same general fold but differ both in the number of repeats and in five highly randomized amino acid positions within each repeat. The randomized side chains altogether provide a hypervariable surface on αRep variants. Sequences from this library are efficiently expressed as soluble, folded and very stable proteins. αRep binders with high affinity for various protein targets were selected by phage display. Low micromolar to nanomolar dissociation constants between partners were measured and the structures of several complexes (specific αRep/protein target) were solved by X-ray crystallography. Using GFP as a model target, it was demonstrated that αReps can be used as bait in pull-down experiments. αReps can be expressed in eukaryotic cells and specifically interact with their target addressed to different cell compartments.

Amphipol-mediated screening of molecular orthoses specific for membrane protein targets.

Specific, tight-binding protein partners are valuable helpers to facilitate membrane protein (MP) crystallization, because they can i) stabilize the protein, ii) reduce its conformational heterogeneity, and iii) increase the polar surface from which well-ordered crystals can grow. The design and production of a new family of synthetic scaffolds (dubbed αReps, for "artificial alpha repeat protein") have been recently described. The stabilization and immobilization of MPs in a functional state are an absolute prerequisite for the screening of binders that recognize specifically their native conformation. We present here a general procedure for the selection of αReps specific of any MP. It relies on the use of biotinylated amphipols, which act as a universal "Velcro" to stabilize, and immobilize MP targets onto streptavidin-coated solid supports, thus doing away with the need to tag the protein itself.

Crystal structure of an antiviral ankyrin targeting the HIV-1 capsid and molecular modeling of the ankyrin-capsid complex.

Ankyrins are cellular repeat proteins, which can be genetically modified to randomize amino-acid residues located at defined positions in each repeat unit, and thus create a potential binding surface adaptable to macromolecular ligands. From a phage-display library of artificial ankyrins, we have isolated Ank(GAG)1D4, a trimodular ankyrin which binds to the HIV-1 capsid protein N-terminal domain (NTD(CA)) and has an antiviral effect at the late steps of the virus life cycle. In this study, the determinants of the Ank(GAG)1D4-NTD(CA) interaction were analyzed using peptide scanning in competition ELISA, capsid mutagenesis, ankyrin crystallography and molecular modeling. We determined the Ank(GAG)1D4 structure at 2.2 Å resolution, and used the crystal structure in molecular docking with a homology model of HIV-1 capsid. Our results indicated that NTD(CA) alpha-helices H1 and H7 could mediate the formation of the capsid-Ank(GAG)1D4 binary complex, but the interaction involving H7 was predicted to be more stable than with H1. Arginine-18 (R18) in H1, and R132 and R143 in H7 were found to be the key players of the Ank(GAG)1D4-NTD(CA) interaction. This was confirmed by R-to-A mutagenesis of NTD(CA), and by sequence analysis of trimodular ankyrins negative for capsid binding. In Ank(GAG)1D4, major interactors common to H1 and H7 were found to be S45, Y56, R89, K122 and K123. Collectively, our ankyrin-capsid binding analysis implied a significant degree of flexibility within the NTD(CA) domain of the HIV-1 capsid protein, and provided some clues for the design of new antivirals targeting the capsid protein and viral assembly.

Antiviral activity of recombinant ankyrin targeted to the capsid domain of HIV-1 Gag polyprotein.

BACKGROUND: Ankyrins are cellular mediators of a number of essential protein-protein interactions. Unlike intrabodies, ankyrins are composed of highly structured repeat modules characterized by disulfide bridge-independent folding. Artificial ankyrin molecules, designed to target viral components, might act as intracellular antiviral agents and contribute to the cellular immunity against viral pathogens such as HIV-1. RESULTS: A phage-displayed library of artificial ankyrins was constructed, and screened on a polyprotein made of the fused matrix and capsid domains (MA-CA) of the HIV-1 Gag precursor. An ankyrin with three modules named Ank(GAG)1D4 (16.5 kDa) was isolated. Ank(GAG)1D4 and MA-CA formed a protein complex with a stoichiometry of 1:1 and a dissociation constant of K(d) ~ 1 µM, and the Ank(GAG)1D4 binding site was mapped to the N-terminal domain of the CA, within residues 1-110. HIV-1 production in SupT1 cells stably expressing Ank(GAG)1D4 in both N-myristoylated and non-N-myristoylated versions was significantly reduced compared to control cells. Ank(GAG)1D4 expression also reduced the production of MLV, a phylogenetically distant retrovirus. The Ank(GAG)1D4-mediated antiviral effect on HIV-1 was found to occur at post-integration steps, but did not involve the Gag precursor processing or cellular trafficking. Our data suggested that the lower HIV-1 progeny yields resulted from the negative interference of Ank(GAG)1D4-CA with the Gag assembly and budding pathway. CONCLUSIONS: The resistance of Ank(GAG)1D4-expressing cells to HIV-1 suggested that the CA-targeted ankyrin Ank(GAG)1D4 could serve as a protein platform for the design of a novel class of intracellular inhibitors of HIV-1 assembly based on ankyrin-repeat modules.

Appraisal of translocation pathways for displaying ankyrin repeat protein on phage particles.

Depending on the molecular properties of the proteins of interest (POI), the rate of success in displaying proteins on phage particles is unpredictable. Formation of polypeptide tertiary structure in the cytoplasm occasionally results in low level display on viral particles. Here we assessed the influence of different leader peptides on the display of a premature cytoplasmic folding protein, ankyrin repeat protein (ARP), via the minor coat protein pIII. These peptides include the Sec, SRP and Tat pathways. The results demonstrated that the Sec and SRP pathways were capable of displaying the protein on the viral particle, whereas the Tat pathway failed to do so. Interestingly, the Tat pathway efficiently directed ARP through its translocon without fusing with pIII. Furthermore, the soluble form of ARP was detected in Escherichia coli periplasm.

Hybrid gold nanoparticle-quantum dot self-assembled nanostructures driven by complementary artificial proteins.

Hybrid nanostructures are constructed by the direct coupling of fluorescent quantum dots and plasmonic gold nanoparticles. Self-assembly is directed by the strong affinity between two artificial α-repeat proteins that are introduced in the capping layers of the nanoparticles at a controlled surface density. The proteins have been engineered to exhibit a high mutual affinity, corresponding to a dissociation constant in the nanomolar range, towards the protein-functionalized quantum dots and gold nanoparticles. Protein-mediated self-assembly is evidenced by surface plasmon resonance and gel electrophoresis. The size and the structure of colloidal superstructures of complementary nanoparticles are analyzed by transmission electron microscopy and small angle X-ray scattering. The size of the superstructures is determined by the number of proteins per nanoparticle. The well-defined geometry of the rigid protein complex sets a highly uniform interparticle distance of 8 nm that affects the emission properties of the quantum dots in the hybrid ensembles. Our results open the route to the design of hybrid emitter-plasmon colloidal assemblies with controlled near-field coupling and better optical response.

Picomolar Biosensing and Conformational Analysis Using Artificial Bidomain Proteins and Terbium-to-Quantum Dot Förster Resonance Energy Transfer.

Although antibodies remain a primary recognition element in all forms of biosensing, functional limitations arising from their size, stability, and structure have motivated the development and production of many different artificial scaffold proteins for biological recognition. However, implementing such artificial binders into functional high-performance biosensors remains a challenging task. Here, we present the design and application of Förster resonance energy transfer (FRET) nanoprobes comprising small artificial proteins (αRep bidomains) labeled with a Tb complex (Tb) donor on the C-terminus and a semiconductor quantum dot (QD) acceptor on the N-terminus. Specific binding of one or two protein targets to the αReps induced a conformational change that could be detected by time-resolved Tb-to-QD FRET. These single-probe FRET switches were used in a separation-free solution-phase assay to quantify different protein targets at sub-nanomolar concentrations and to measure the conformational changes with sub-nanometer resolution. Probing ligand-receptor binding under physiological conditions at very low concentrations in solution is a special feature of FRET that can be efficiently combined with other structural characterization methods to develop, understand, and optimize artificial biosensors. Our results suggest that the αRep FRET nanoprobes have a strong potential for their application in advanced diagnostics and intracellular live-cell imaging of ligand-receptor interactions.

Disulfide bond substitution by directed evolution in an engineered binding protein.

Breaking ties: The antitumour protein, neocarzinostatin (NCS), is one of the few drug-carrying proteins used in human therapeutics. However, the presence of disulfide bonds limits this protein's potential development for many applications. This study describes a generic directed-evolution approach starting from NCS-3.24 (shown in the figure complexed with two testosterone molecules) to engineer stable disulfide-free NCS variants suitable for a variety of purposes, including intracellular applications.The chromoprotein neocarzinostatin (NCS) has been intensively studied for its antitumour properties. It has recently been redesigned as a potential drug-carrying scaffold. A potential limit of this protein scaffold, especially for intracellular applications, is the presence of disulfide bonds. The objective of this work was to create a disulfide-free NCS-derived scaffold. A generic targeted approach was developed by using directed evolution methods. As a starting point we used a previously engineered NCS variant in which a hapten binding site had been created. A library was then generated in which cysteine Cys88 and Cys93 and neighbouring residues were randomly substituted. Variants that preserved the hapten binding function were selected by phage display and further screened by colony filtration methods. Several sequences with common features emerged from this process. The corresponding proteins were expressed, purified and their biophysical properties characterised. How these selected sequences rescued folding ability and stability of the disulfide-free protein was carefully examined by using calorimetry and the results were interpreted with molecular simulation techniques.

Directed evolution of artificial repeat proteins as habit modifiers for the morphosynthesis of (111)-terminated gold nanocrystals.

Natural biocomposites are shaped by proteins that have evolved to interact with inorganic materials. Protein directed evolution methods which mimic Darwinian evolution have proven highly successful to generate improved enzymes or therapeutic antibodies but have rarely been used to evolve protein-material interactions. Indeed, most reported studies have focused on short peptides and a wide range of oligopeptides with chemical binding affinity for inorganic materials have been uncovered by phage display methods. However, their small size and flexible unfolded structure prevent them from dictating the shape and crystallinity of the growing material. In the present work, a specific set of artificial repeat proteins (αRep), which exhibit highly stable 3D folding with a well-defined hypervariable interacting surface, is selected by directed evolution of a very efficient home-built protein library for their high and selective affinity for the Au(111) surface. The proteins are built from the extendable concatenation of self-compatible repeated motifs idealized from natural HEAT proteins. The high-yield synthesis of Au(111)-faceted nanostructures mediated by these αRep proteins demonstrates their chemical affinity and structural selectivity that endow them with high crystal habit modification performances. Importantly, we further exploit the protein shell spontaneously assembled on the nanocrystal facets to drive protein-mediated colloidal self-assembly and on-surface enzymatic catalysis. Our method constitutes a generic tool for producing nanocrystals with determined faceting, superior biocompatibility and versatile bio-functionalization towards plasmon-based devices and (bio)molecular sensors.

Selection and Characterization of Artificial Proteins Targeting the Tubulin α Subunit.

Microtubules are cytoskeletal filaments of eukaryotic cells made of αß-tubulin heterodimers. Structural studies of non-microtubular tubulin rely mainly on molecules that prevent its self-assembly and are used as crystallization chaperones. Here we identified artificial proteins from an αRep library that are specific to α-tubulin. Turbidity experiments indicate that these αReps impede microtubule assembly in a dose-dependent manner and total internal reflection fluorescence microscopy further shows that they specifically block growth at the microtubule (-) end. Structural data indicate that they do so by targeting the α-tubulin longitudinal surface. Interestingly, in one of the complexes studied, the α subunit is in a conformation that is intermediate between the ones most commonly observed in X-ray structures of tubulin and those seen in the microtubule, emphasizing the plasticity of tubulin. These α-tubulin-specific αReps broaden the range of tools available for the mechanistic study of microtubule dynamics and its regulation.