Capturing Exposure Disparities with Chemical Transport Models: Evaluating the Suitability of Downscaling Using Land Use Regression.

High resolution exposure surfaces are essential to capture disparities in exposure to traffic-related air pollution in urban areas. In this study, we develop an approach to downscale Chemical Transport Model (CTM) simulations to a hyperlocal level (∼100m) in the Greater Toronto Area (GTA) under three scenarios where emissions from cars, trucks and buses are zeroed out, thus capturing the burden of each transportation mode. This proposed approach statistically fuses CTMs with Land-Use Regression using machine learning techniques. With this proposed downscaling approach, changes in air pollutant concentrations under different scenarios are appropriately captured by downscaling factors that are trained to reflect the spatial distribution of emission reductions. Our validation analysis shows that high-resolution models resulted in better performance than coarse models when compared with observations at reference stations. We used this downscaling approach to assess disparities in exposure to nitrogen dioxide (NO2) for populations composed of renters, low-income households, recent immigrants, and visible minorities. Individuals in all four categories were disproportionately exposed to the burden of cars, trucks, and buses. We conducted this analysis at spatial resolutions of 12, 4, 1 km, and 100 m and observed that disparities were significantly underestimated when using coarse spatial resolutions. This reinforces the need for high-spatial resolution exposure surfaces for environmental justice analyses.

Societal Co-benefits of Zero-Emission Vehicles in the Freight Industry.

This study was set in the Greater Toronto and Hamilton Area (GTHA), where commercial vehicle movements were assigned across the road network. Implications for greenhouse gas (GHG) emissions, air quality, and health were examined through an environmental justice lens. Electrification of light-, medium-, and heavy-duty trucks was assessed to identify scenarios associated with the highest benefits for the most disadvantaged communities. Using spatially and temporally resolved commercial vehicle movements and a chemical transport model, changes in air pollutant concentrations under electric truck scenarios were estimated at 1-km2 resolution. Heavy-duty truck electrification reduces ambient black carbon and nitrogen dioxide on average by 10 and 14%, respectively, and GHG emissions by 10.5%. It achieves the highest reduction in premature mortality attributable to fine particulate matter chronic exposure (around 200 cases per year) compared with light- and medium-duty electrification (less than 150 cases each). The burden of all traffic in the GTHA was estimated to be around 600 cases per year. The benefits of electrification accrue primarily in neighborhoods with a high social disadvantage, measured by the Ontario Marginalization Indices, narrowing the disparity of exposure to traffic-related air pollution. Benefits related to heavy-duty truck electrification reflect the adverse impacts of diesel-fueled freight and highlight the co-benefits achieved by electrifying this sector.

Changes in industrial air pollution and the onset of childhood asthma in Quebec, Canada.

Ambient air pollution has been associated with asthma onset and exacerbation in children. Whether improvement in air quality due to reduced industrial emissions has resulted in improved health outcomes such as asthma in some localities has usually been assessed indirectly with studies on between-subject comparisons of air pollution from all sources and health outcomes. In this study we directly assessed, within small areas in the province of Quebec (Canada), the influence of changes in local industrial fine particulate matter (PM2.5), nitrogen dioxide (NO2), and sulfur dioxide (SO2) concentrations, on changes in annual asthma onset rates in children (≤12 years old) with a longitudinal ecological design. We identified the yearly number of new cases of childhood asthma in 1282 small areas (census tracts or local community service centers) for the years 2002, 2004, 2005, 2006, and 2015. Annual average concentrations of industrial air pollutants for each of the geographic areas, and three sectors (i.e., pulp and paper mills, petroleum refineries, and metal smelters) were estimated by the Polair3D chemical transport model. Fixed-effects negative binomial models adjusted for household income were used to assess associations; additional adjustments for environmental tobacco smoke, background pollutant concentrations, vegetation coverage, and sociodemographic characteristics were conducted in sensitivity analyses. The incidence rate ratios (IRR) for childhood asthma onset for the interquartile increase in total industrial PM2.5, NO2, and SO2 were 1.016 (95% confidence interval, CI: 1.006-1.026), 1.063 (1.045-1.090), and 1.048 (1.031-1.080), respectively. Positive associations were also found with pollutant concentrations from most individual sectors. Results suggest that changes in industrial pollutant concentrations influence childhood asthma onset rates in small localities.

Predicting Spatial Variations in Multiple Measures of PM2.5 Oxidative Potential and Magnetite Nanoparticles in Toronto and Montreal, Canada.

There is growing interest to move beyond fine particle mass concentrations (PM2.5) when evaluating the population health impacts of outdoor air pollution. However, few exposure models are currently available to support such analyses. In this study, we conducted large-scale monitoring campaigns across Montreal and Toronto, Canada during summer 2018 and winter 2019 and developed models to predict spatial variations in (1) the ability of PM2.5 to generate reactive oxygen species in the lung fluid (ROS), (2) PM2.5 oxidative potential based on the depletion of ascorbate (OPAA) and glutathione (OPGSH) in a cell-free assay, and (3) anhysteretic magnetic remanence (XARM) as an indicator of magnetite nanoparticles. We also examined how exposure to PM oxidative capacity metrics (ROS/OP) varied by socioeconomic status within each city. In Montreal, areas with higher material deprivation, indicating lower area-level average household income and employment, were exposed to PM2.5 characterized by higher ROS and OP. This relationship was not observed in Toronto. The developed models will be used in epidemiologic studies to assess the health effects of exposure to PM2.5 and iron-rich magnetic nanoparticles in Toronto and Montreal.

Does early life exposure to exogenous sources of reactive oxygen species (ROS) increase the risk of respiratory and allergic diseases in children? A longitudinal cohort study.

BACKGROUND: Excess reactive oxygen species (ROS) can cause oxidative stress damaging cells and tissues, leading to adverse health effects in the respiratory tract. Yet, few human epidemiological studies have quantified the adverse effect of early life exposure to ROS on child health. Thus, this study aimed to examine the association of levels of ROS exposure at birth and the subsequent risk of developing common respiratory and allergic diseases in children. METHODS: 1,284 Toronto Child Health Evaluation Questionnaire (T-CHEQ) participants were followed from birth (born between 1996 and 2000) until outcome, March 31, 2016 or loss-to-follow-up. Using ROS data from air monitoring campaigns and land use data in Toronto, ROS concentrations generated in the human respiratory tract in response to inhaled pollutants were estimated using a kinetic multi-layer model. These ROS values were assigned to participants' postal codes at birth. Cox proportional hazards regression models, adjusted for confounders, were then used to estimate hazard ratios (HR) with 95% confidence intervals (CI) per unit increase in interquartile range (IQR). RESULTS: After adjusting for confounders, iron (Fe) and copper (Cu) were not significantly associated with the risk of asthma, allergic rhinitis, nor eczema. However, ROS, a measure of the combined impacts of Fe and Cu in PM2.5, was associated with an increased risk of asthma (HR = 1.11, 95% CI: 1.02-1.21, p < 0.02) per IQR. There were no statistically significant associations of ROS with allergic rhinitis (HR = 0.96, 95% CI: 0.88-1.04, p = 0.35) and eczema (HR = 1.03, 95% CI: 0.98-1.09, p = 0.24). CONCLUSION: These findings showed that ROS exposure in early life significantly increased the childhood risk of asthma, but not allergic rhinitis and eczema.

Within-City Variation in Reactive Oxygen Species from Fine Particle Air Pollution and COVID-19.

Rationale: Evidence linking outdoor air pollution with coronavirus disease (COVID-19) incidence and mortality is largely based on ecological comparisons between regions that may differ in factors such as access to testing and control measures that may not be independent of air pollution concentrations. Moreover, studies have yet to focus on key mechanisms of air pollution toxicity such as oxidative stress. Objectives: To conduct a within-city analysis of spatial variations in COVID-19 incidence and the estimated generation of reactive oxygen species (ROS) in lung lining fluid attributable to fine particulate matter (particulate matter with an aerodynamic diameter ⩽2.5 µm [PM2.5]). Methods: Sporadic and outbreak-related COVID-19 case counts, testing data, population data, and sociodemographic data for 140 neighborhoods were obtained from the City of Toronto. ROS estimates were based on a mathematical model of ROS generation in lung lining fluid in response to iron and copper in PM2.5. Spatial variations in long-term average ROS were predicted using a land-use regression model derived from measurements of iron and copper in PM2.5. Data were analyzed using negative binomial regression models adjusting for covariates identified using a directed acyclic graph and accounting for spatial autocorrelation. Measurements and Main Results: A significant positive association was observed between neighborhood-level ROS and COVID-19 incidence (incidence rate ratio = 1.07; 95% confidence interval, 1.01-1.15 per interquartile range ROS). Effect modification by neighborhood-level measures of racialized group membership and socioeconomic status was also identified. Conclusions: Examination of neighborhood characteristics associated with COVID-19 incidence can identify inequalities and generate hypotheses for future studies.

Health and Climate Incentives for the Deployment of Cleaner On-Road Vehicle Technologies.

Reducing greenhouse gas (GHG) emissions of private passenger vehicles, transit buses, and commercial vehicles with newer technology can improve air quality, and, subsequently, population exposure and public health. For the Greater Toronto and Hamilton Area, we estimated the burden of each vehicle fleet on population health in the units of years of life lost and premature deaths. We then assessed the separate health benefits of electrifying private vehicles, transit buses, and replacing the oldest commercial vehicles with newer trucks. A complete deployment of electric passenger vehicles would lead to health benefits similar to replacing all trucks older than 8 years (i.e., about 300 premature deaths prevented) in the first year of implementation; however, GHG emissions would be mainly reduced with passenger fleet electrification. Transit bus electrification has similar health benefits as electrifying half of the passenger fleet (i.e., about 150 premature deaths prevented); however, the GHG emission reductions reached under the bus electrification scenario are lower by 90%. By accelerating policies to electrify cars and buses and renew older trucks, governments can save hundreds of lives per year and mitigate the impacts of climate change.

Greenhouse Gas Emission Mitigation Pathways for Urban Passenger Land Transport under Ambitious Climate Targets.

Urban passenger land transport is an important source of greenhouse gas (GHG) emissions globally, but it is challenging to mitigate these emissions as this sector interacts with many other economic sectors. We develop the Climate change constrained Urban passenger Transport Integrated Life cycle assessment (CURTAIL) model to outline mitigation pathways of urban passenger land transport that are consistent with ambitious climate targets. CURTAIL uses the transport activity of exogenously defined modal shares to simulate the associated annual vehicle stocks, sales, and life cycle GHG emissions. It estimates GHG emission budgets that are consistent with global warming below 2 and 1.5 °C above preindustrial levels and seeks mitigation strategies to remain within the budgets. We apply it to a case study of Singapore, a city-state. Meeting a 1.5 °C target requires strong commitments in the transport and electricity sectors, such as reducing the motorized passenger activity, accelerating the deployment of public transit and of electrification, and decarbonizing the power generation system. Focusing on one mitigation technology or one mode of transport alone will not be sufficient to meet the target. Our novel model could be applied to any city to provide insights relevant to the design of urban climate change mitigation targets and policies.

Predicting Traffic-Related Air Pollution Using Feature Extraction from Built Environment Images.

This study develops a set of algorithms to extract built environment features from Google aerial and street view images, reflecting the microcharacteristics of an urban location as well as the different functions of buildings. These features were used to train a Bayesian regularized artificial neural network (BRANN) model to predict near-road air quality based on measurements of ultrafine particles (UFPs) and black carbon (BC) in Toronto, Canada. The resulting models [adjusted R2 of 75.87 and 79.10% for UFP and BC and root mean squared error (RMSE) of 21,800 part/cm3 and 1300 ng/m3 for UFP and BC] were compared with similar ANN models developed using the same predictors, but extracted from traditional geographic information system (GIS) databases [adjusted R2 of 58.74 and 64.21% for UFP and BC and RMSE values of 23,000 part/cm3 and 1600 ng/m3 for UFP and BC]. The models based on feature extraction exhibited higher predictive power, thus highlighting the greater accuracy of the proposed methods compared to GIS layers that are solely based on aerial images. A comparison with other neural network approaches as well as with a traditional land-use regression model demonstrates the strength of the BRANN model for spatial interpolation of air quality.

Influence of travel behaviour and daily mobility on exposure to traffic-related air pollution.

This study evaluates the daily exposure of urban residents across various commuting modes and destinations by intersecting data from a travel survey with exposure surfaces for ultrafine particles and black carbon, in Toronto, Canada. We demonstrate that exposure misclassification is bound to arise when we approximate daily exposure with the concentration at the home location. We also identify potential inequities in the distribution of exposure to traffic-related air pollution whereby those who are mostly responsible for the generation of traffic-related air pollution (drivers and passengers) are exposed the least while active commuters and transit riders, are exposed the most.

Quantifying the air quality and health benefits of greening freight movements.

Commercial vehicle movements have a large effect on traffic-related air pollution in metropolitan areas. In the Greater Toronto and Hamilton Area (GTHA), commercial vehicles include large and medium diesel trucks as well as light-duty gasoline-fuelled trucks. In this study, the emissions of various air pollutants associated with diesel commercial vehicles were estimated and their impacts on urban air quality, population exposure, and public health were quantified. Using data on diesel trucks in the GTHA and a chemical transport model at a spatial resolution of 1 km2, the contribution of commercial diesel movements to air quality was estimated. This contribution amounts to about 6-22% of the mean population exposure to nitrogen dioxide (NO2) and black carbon (BC), depending on the municipality, but is systematically lower than 3% for fine particulate matter (PM2.5) and ozone (O3). Using a comparative risk assessment approach, we estimated that the emissions of all diesel commercial vehicles within the GTHA are responsible for an annual total of at least 9810 Years of Life Lost (YLL), corresponding to $3.2 billion of annual social costs. We also assessed the impact of decreasing freeway-sourced diesel emissions along Highway 401, one of the busiest highways in North America. This is comparable with a removal of 250 to 1000 diesel trucks per day along that corridor, which could be replaced by alternative technologies. The mean NO2 and BC exposures of the population living within 500 m of the highway would decrease by 9% and 11%, respectively, with reductions as high as 22%. Such a measure would save 1310 YLL annually, equivalent to $428 million in social benefits.

Extending the spatial scale of land use regression models for ambient ultrafine particles using satellite images and deep convolutional neural networks.

We paired existing land use regression (LUR) models for ambient ultrafine particles in Montreal and Toronto, Canada with satellite images and deep convolutional neural networks as a means of extending the spatial coverage of these models. Our findings demonstrate that this method can be used to expand the spatial scale of LUR models, thus providing exposure estimates for larger populations. The cost of this approach is a small loss in precision as the training data are themselves modelled values.

Development and Comparison of Air Pollution Exposure Surfaces Derived from On-Road Mobile Monitoring and Short-Term Stationary Sidewalk Measurements.

Land-use regression (LUR) models of air pollutants are frequently developed on the basis of short-term stationary or mobile monitoring approaches, which raises the question of whether these two data collection protocols lead to similar exposure surfaces. In this study, we measured ultrafine particles (UFP) and black carbon (BC) concentrations in Toronto during summer 2016, using two short-term data collection approaches: mobile, involving 3023 road segments sampled on bicycles, and stationary, involving 92 sidewalk locations. We developed four LUR models and exposure surfaces, for the two pollutants and measurement protocols. Coefficients of determination ( R2) varied from 0.434 to 0.525. Various small-scale traffic variables were included in the mobile LUR. Pearson correlation coefficients between the mobile and stationary surfaces were 0.23 for UFP and 0.49 for BC. We also compared the two surfaces using personal exposures from a panel study in Toronto conducted during the same period. The personal exposures differed from the outdoor exposures derived from the combination of GPS information and exposure surfaces. For UFP, the median for personal outdoor exposure was 26 344 part/cm3, while the cycling and stationary surfaces predicted medians of 31 201 and 19 057 part/cm3. Similar trends were observed for BC, with median exposures of 1764 (personal), 1799 (cycling), and 1469 ng/m3 (stationary).

Capturing the spatial variability of noise levels based on a short-term monitoring campaign and comparing noise surfaces against personal exposures collected through a panel study.

Environmental noise can cause important cardiovascular effects, stress and sleep disturbance. The development of appropriate methods to estimate noise exposure within a single urban area remains a challenging task, due to the presence of various transportation noise sources (road, rail, and aircraft). In this study, we developed a land-use regression (LUR) approach using a Generalized Additive Model (GAM) for LAeq (equivalent noise level) to capture the spatial variability of noise levels in Toronto, Canada. Four different model formulations were proposed based on continuous 20-min noise measurements at 92 sites and a leave one out cross-validation (LOOCV). Models where coefficients for variables considered as noise sources were forced to be positive, led to the development of more realistic exposure surfaces. Three different measures were used to assess the models; adjusted R2 (0.44-0.64), deviance (51-72%) and Akaike information criterion (AIC) (469.2-434.6). When comparing exposures derived from the four approaches to personal exposures from a panel study, we observed that all approaches performed very similarly, with values for the Fractional mean bias (FB), normalized mean square error (NMSE), and normalized absolute difference (NAD) very close to 0. Finally, we compared the noise surfaces with data collected from a previous campaign consisting of 1-week measurements at 200 fixed sites in Toronto and observed that the strongest correlations occurred between our predictions and measured noise levels along major roads and highway collectors. Our validation against long-term measurements and panel data demonstrates that manual modifications brought to the models were able to reduce bias in model predictions and achieve a wider range of exposures, comparable with measurement data.

Robustness of Land-Use Regression Models Developed from Mobile Air Pollutant Measurements.

Land-use regression (LUR) models are useful for resolving fine scale spatial variations in average air pollutant concentrations across urban areas. With the rise of mobile air pollution campaigns, characterized by short-term monitoring and large spatial extents, it is important to investigate the effects of sampling protocols on the resulting LUR. In this study a mobile lab was used to repeatedly visit a large number of locations (∼1800), defined by road segments, to derive average concentrations across the city of Montreal, Canada. We hypothesize that the robustness of the LUR from these data depends upon how many independent, random times each location is visited (Nvis) and the number of locations (Nloc) used in model development and that these parameters can be optimized. By performing multiple LURs on random sets of locations, we assessed the robustness of the LUR through consistency in adjusted R2 (i.e., coefficient of variation, CV) and in regression coefficients among different models. As Nloc increased, R2adj became less variable; for Nloc = 100 vs Nloc = 300 the CV in R2adj for ultrafine particles decreased from 0.088 to 0.029 and from 0.115 to 0.076 for NO2. The CV in the R2adj also decreased as Nvis increased from 6 to 16; from 0.090 to 0.014 for UFP. As Nloc and Nvis increase, the variability in the coefficient sizes across the different model realizations were also seen to decrease.

Modelling spatial & temporal variability of air pollution in an area of unconventional natural gas operations.

Despite the growing unconventional natural gas production industry in northeastern British Columbia, Canada, few studies have explored the air quality implications on human health in nearby communities. Researchers who have worked with pregnant women in this area have found higher levels of volatile organic compounds (VOCs) in the indoor air of their homes associated with higher density and closer proximity to gas wells. To inform ongoing exposure assessments, this study develops land use regression (LUR) models to predict ambient air pollution at the homes of pregnant women by using natural gas production activities as predictor variables. Using the existing monitoring network, the models were developed for three temporal scales for 12 air pollutants. The models predicting monthly, bi-annual, and annual mean concentrations explained 23%-94%, 54%-94%, and 73%-91% of the variability in air pollutant concentrations, respectively. These models can be used to investigate associations between prenatal exposure to air pollutants associated with natural gas production and adverse health outcomes in northeastern British Columbia.

Assessment of children's personal and land use regression model-estimated exposure to NO2 in Springfield, Massachusetts.

Ambient nitrogen dioxide (NO2) is derived from tailpipe vehicle emission and is linked with various of health outcomes. Personal exposure monitoring is crucial for accurate assessment of the associated disease risks. This study aimed to evaluate the utility of a wearable air pollutant sampler in determining the personal NO2 exposure of school children for comparison with a model-based personal exposure assessment. We employed cost-effective, wearable passive samplers to directly measure personal exposure of 25 children (aged 12-13 years) in Springfield, MA to NO2 over a five-day period in winter 2018. NO2 levels were additionally measured at 40 outdoor sites in the same region using stationary passive samplers. A land use regression (LUR) model was developed based on the ambient NO2 measures, with a good prediction performance (R2 = 0.72) using road lengths, distance to highway, and institutional land area as predictor variables. Time-weighted averages (TWA), which incorporated the time-activity patterns of participants and LUR-derived estimates in children's primary microenvironments (homes, the school and commute paths), were calculated as an indirect measure of personal NO2 exposure. Results indicated that the conventional residence-based exposure estimate approach, often used in epidemiological studies, differed from the direct personal exposure and could overestimate the personal exposure by up to 109 %. TWA improved personal NO2 exposure estimates by accounting for the time activity patterns of individuals, a difference of 5.4 % ± 34.2 % was found for exposures compared to wristband measurements. Nevertheless, the personal wristband measurements exhibited a large variability due to the potential contributions from indoor and in-vehicle NO2 sources. The findings suggest that exposure to NO2 can be highly personalized based on individual activities and contact with pollutants in specific microenvironments, reaffirming the importance of measuring personal exposure.

Use and release of per- and polyfluoroalkyl substances (PFASs) in consumer food packaging in U.S. and Canada.

Numerous per- and polyfluoroalkyl substances (PFASs) occur in consumer food packaging due to intentional and unintentional addition, despite increasing concern about their health and environmental hazards. We present a substance flow analysis framework to assess the flows of PFASs contained in plant fiber-based and plastic food packaging to the waste stream and environment. Each year between 2018 and 2020, an estimated 9000 (range 1100-25 000) and 940 (range 120-2600) tonnes per year of polymeric PFASs were used in 2% of food packaging in the U.S. and Canada, respectively. At least 11 tonnes per year of non-polymeric PFASs also moved through the food packaging life cycle. Approximately 6100 (range 690-13 000) and 700 (range 70-1600) tonnes per year of these PFASs were landfilled or entered composting facilities in the U.S. and Canada, respectively, with the potential to contaminate the environment. The results suggest that minimal food packaging contains intentionally added PFASs which, nonetheless, has the potential to contaminate the entire waste stream. Further, this indicates that PFASs are not needed for most food packaging. These results serve as a benchmark to judge the effectiveness of future industry and government initiatives to limit PFAS use in food packaging.