Effectiveness of gelatin matrix with human thrombin for reducing blood loss in palliative decompressive surgery with posterior spinal fusion for metastatic spinal tumors.

BACKGROUND: This study aimed to investigate the effect of gelatin matrix with human thrombin (GMHT) on blood loss and survival time in patients with metastatic spinal tumors treated with palliative decompression surgery with posterior spinal fusion. METHODS: We retrospectively reviewed 67 consecutive patients with metastatic spinal tumors who underwent palliative decompression surgery with posterior spinal fusion. We compared patients in whom GMHT was not used during surgery with those in whom GMHT was used. The following baseline characteristics were evaluated: age, height, weight, sex, metastatic tumor diagnosis, medical history, use of antiplatelet drug, use of anticoagulant drug, use of NSAIDs, smoking, preoperative PLT value, preoperative APTT, preoperative PT-INR, Karnofsky Performance Status score, Charlson comorbidities index score, the percentage of patients who received perioperative chemotherapy, main tumor level, Frankel category, revised Tokuhashi score, spinal instability neoplastic score (SINS), number of fusion segments, operation time, intraoperative blood loss, drainage blood loss, red blood cell transfusion, hemoglobin level, total protein (TP), albumin values, total blood loss (TBL), hidden blood loss, postoperative bed rest and postoperative survival time. Perioperative complications were assessed. RESULTS: Age, height, weight, sex, metastatic tumor diagnosis, medical history, use of antiplatelet drug, use of anticoagulant drug, use of NSAIDs, smoking, preoperative PLT value, preoperative APTT, preoperative PT-INR, CCI score, main level of tumors, SINS score, preoperative Tokuhashi score and number of fusion segments did not differ significantly between the two groups. Operation time, intraoperative blood loss, postoperative drainage blood loss, and TBL were significantly decreased in the group with GMHT than in the group without GMHT. The total number of perioperative complications was significantly lesser in the group with GMHT than in the group without GMHT. The median postoperative survival time was significantly longer in the GMHT group than in the group without GMHT. CONCLUSION: GMHT should be considered a valid option for the treatment of patients with metastatic spinal tumors with a short life expectancy.

Optimal Intermittent Administration Interval of Abaloparatide for Bone Morphogenetic Protein-Induced Bone Formation in a Rat Spinal Fusion Model.

Both bone morphogenetic protein 2 (BMP-2) and abaloparatide are used to promote bone formation. However, there is no consensus about their optimal administration. We investigated the optimal administration theory for the pairing of BMP-2 and abaloparatide in a rat spinal fusion model. Group I was only implanted in carriers and saline. Carriers with 3 µg of recombinant human BMP-2 (rhBMP-2) were implanted in other groups. Abaloparatide injections were administered three times a week for group III (for a total amount of 120 µg/kg in a week) and six times a week for group IV (for a total amount of 120 µg/kg in a week) after surgery. They were euthanized 8 weeks after the surgery, and we explanted their spines at that time. We assessed them using manual palpation tests, radiography, high-resolution micro-computed tomography (micro-CT), and histological analysis. We also analyzed serum bone metabolism markers. The fusion rate in Groups III and IV was higher than in Group I, referring to the manual palpation tests. Groups III and IV recorded greater radiographic scores than those in Groups I and II, too. Micro-CT analysis showed that Tbs. Sp in Groups III and IV was significantly lower than in Group I. Tb. N in Group IV was significantly higher than in Group I. Serum marker analysis showed that bone formation markers were higher in Groups III and IV than in Group I. On the other hand, bone resorption markers were lower in Group IV than in Group I. A histological analysis showed enhanced trabecular bone osteogenesis in Group IV. Frequent administration of abaloparatide may be suitable for the thickening of trabecular bone structure and the enhancement of osteogenesis in a rat spinal fusion model using BMP-2 in insufficient doses.

Analysis of accuracy of pedicle screw placement in dysplastic pedicles in adolescent idiopathic scoliosis using the pedicle expansion technique with CT-based navigation.

BACKGROUND: This study aimed to study the accuracy of pedicle screw (PS) insertion into dysplastic pedicles in adolescent idiopathic scoliosis (AIS) comparing cannulated screw using the pedicle expansion technique (PET) versus conventional technique. METHODS: Forty-two AIS patients with 766 PSs were evaluated. In total, 236 screws were inserted into dysplastic pedicles: 138 and 98 screws were inserted using the PET (PET group) and standard technique (conventional group), respectively. Both methods used CT-based navigation to determine the insertion point. In the PET, a rigid ball tip feeler was tapped with a mallet to create an insertion route, a guide wire was passed through the tap, the pedicle was enlarged, and then a cannulated PS with a diameter of 4.35 mm was inserted. Postoperative CT was used to compare the accuracy of PS insertion. RESULTS: In total, 23/236 (9.7%) perforations occurred. Regarding overall perforation, there were six (4.3%) and 17 (17.3%) cases in the PET and conventional group, respectively (P = 0.008). In terms of medial perforation, the PET group (n = 2, 1.4%) was significantly better than the conventional group (n = 7, 7.1%) (P = 0.021). In terms of lateral perforation, the PET group (n = 4, 2.9%) was significantly better than conventional group (n = 10, 10.2%) (P = 0.030). Only grade 1 perforation had occurred in the PET group, whereas grades 2 and 3 perforation occurred in the conventional group. CONCLUSION: Use of the PET with CT-based navigation significantly increased the accuracy and safety of PS insertion in dysplastic pedicles in AIS.

Worsening ambulation in elderly patients with cervical odontoid fractures: A nationwide multicenter study in Japan.

BACKGROUND: Despite the increasing prevalence of cervical odontoid fractures in older adults, the treatment strategy is controversial. The objectives of the current study are to investigate the prognosis and complications of cervical odontoid fractures in elderly patients and to identify factors associated with worsening of ambulation after 6 months. METHODS: This multicenter, retrospective study included 167 patients aged 65 years or older with odontoid fractures. Patient demographic and treatment data were investigated and compared according to the treatment strategy. To determine associations with worsening ambulation after 6 months, we focused on the treatment strategies (nonsurgical treatment [collar immobilization or halo vest], conversion to surgery, or initial surgery) and patients' background. RESULTS: Patients who received nonsurgical treatment were significantly older, and patients who underwent surgery had more Anderson-D'Alonzo type 2 fractures. Of the patients initially treated nonsurgically, 26% later underwent surgery. Numbers of complications, including death, and degrees of ambulation after 6 months did not differ significantly among treatment strategies. Patients who had worsened ambulation after 6 months were significantly more likely to be older than 80 years, to have needed assistance with walking before injury, and to have cerebrovascular disease. Multivariable analysis showed that a score of ≥2 on the 5-item modified frailty index (mFI-5) was significantly associated with worsening ambulation. CONCLUSIONS: Preinjury mFI-5 scores of ≥2 were significantly associated with worsening ambulation 6 months after treatment of cervical odontoid fractures in older adults.

A nationwide multicenter study of the cost effectiveness of five leading drugs for pharmacological management of cervicobrachial symptoms.

BACKGROUND: Cervicobrachial pain frequently affects the quality of life (QOL) of the general public and has a significant economic impact on the health care systems of various countries. There are a number of treatment options for this disease, including widely-used drug therapy, but the effectiveness of each option is indeterminate, and there have been no published cost-effectiveness analysis studies so far. This prospective observational study aimed to examine the cost-effectiveness of drug treatment for cervicobrachial symptoms. METHODS: A 6-month medication regimen for each of five frequently-prescribed drugs for cervicobrachial symptoms was administered to 322 patients at 24 centers in Japan. Outcome measures, including of the EuroQol Group 5D, Short Form-8, and Visual Analog Scale (VAS), were investigated at baseline and every month thereafter. Incremental cost-effectiveness ratios (ICERs) of the drug cost to quality-adjusted life years (QALYs) were calculated. A stratified analysis of patient characteristics was also performed to identify baseline factors potentially affecting cost-effectiveness. RESULTS: The ICER of entire drug treatment for cervicobrachial symptoms was 7,491,640 yen. Compared with the reference willingness-to-pay, the ICER was assumed to not be cost-effective. A certain number of QALYs were gained during the first 3 months after the treatment intervention, but almost no QALYs were gained during the following 3 months. Stratified analysis showed that cost-effectiveness was extremely low for patients with high baseline VAS and high QOL. CONCLUSIONS: The available medications for cervicobrachial symptoms did not have excellent cost-effectiveness. Although a certain number of QALYs were gained during the first 3 months after medication, no QALYs were gained in the latter half of the study period, suggesting that it is not advisable to continue the medication needlessly. LEVEL OF EVIDENCE: II, prospective cohort study.

Whitening efficacy and tooth sensitivity in a combined in-office and at-home whitening protocol: A randomized controlled clinical trial.

OBJECTIVE: This controlled randomized clinical trial determined the whitening efficacy and the intensity and absolute risk of tooth sensitivity in dual whitening when prefilled at-home whitening trays were used between in-office whitening intervals. MATERIALS AND METHODS: An in-office whitening agent containing 35% hydrogen peroxide was used. A prefilled tray with a whitening agent containing 6% hydrogen peroxide was used for at-home whitening. Sixty-six subjects were randomly assigned to three groups. Group I: at-home whitening was performed 10 times between the in-office whitening treatments. Group II: at-home whitening was performed five times between the in-office whitening treatments. Group III: only in-office whitening was performed. The tooth color changes were evaluated using a spectrophotometer. A visual analog scale was used to express the pain intensity. RESULTS: All the groups showed increased ΔE*ab, ΔE00 , and ΔWID with increased whitening sessions. Group I at the 3rd whitening session showed significantly higher ΔE*ab, ΔE00 , and ΔWID than group III. Tooth sensitivity showed higher values up to 24 h after whitening. CONCLUSIONS: Although dual whitening with the prefilled tray and in-office whitening had higher whitening ability than in-office whitening alone, the intensity and absolute risk of tooth sensitivity was similar. CLINICAL RELEVANCE: The dual whitening might produce faster and stronger whitening effects than in-office whitening alone.

Small Molecules Temporarily Induce Neuronal Features in Adult Canine Dermal Fibroblasts.

Several methods have been developed to generate neurons from other cell types for performing regeneration therapy and in vitro studies of central nerve disease. Small molecules (SMs) can efficiently induce neuronal features in human and rodent fibroblasts without transgenes. Although canines have been used as a spontaneous disease model of human central nerve, efficient neuronal reprogramming method of canine cells have not been well established. We aimed to induce neuronal features in adult canine dermal fibroblasts (ACDFs) by SMs and assess the permanency of these changes. ACDFs treated with eight SMs developed a round-shaped cell body with branching processes and expressed neuronal proteins, including ßIII-tubulin, microtubule-associated protein 2 (MAP2), and neurofilament-medium. Transcriptome profiling revealed the upregulation of neuron-related genes, such as SNAP25 and GRIA4, and downregulation of fibroblast-related genes, such as COL12A1 and CCN5. Calcium fluorescent imaging demonstrated an increase in intracellular Ca2+ concentration upon stimulation with glutamate and KCl. Although neuronal features were induced similarly in basement membrane extract droplet culture, they diminished after culturing without SMs or in vivo transplantation into an injured spinal cord. In conclusion, SMs temporarily induce neuronal features in ACDFs. However, the analysis of bottlenecks in the neuronal induction is crucial for optimizing the process.

Influence of bonding agent application method on the dentin bond durability of a two-step adhesive utilizing a universal-adhesive-derived primer.

This study investigated the effect of the bonding agent application method on the dentin bond durability of a two-step adhesive utilizing a universal-adhesive-derived primer. The bonding durability of a universal adhesive was compared with those of two conventional two-step adhesives by shear bond strength testing after thermal cycling. The primer was applied (with or without phosphoric acid pre-etching), and the specimens were divided into three groups based on the bonding agent application method used as follows: (i) strong air-flow application, (ii) gentle air-flow application, and (iii) gentle air-flow + second bonding application. The shear bond strength was determined after thermal cycling. All the factors (bonding agent application method, adhesive system, and storage condition) significantly influenced the dentin shear bond strength both with and without phosphoric acid pre-etching. The specimens exposed to gentle air-flow showed a higher shear bond strength than did those exposed to strong air-flow and gentle air-flow + second bonding. The bond durability of the tested adhesive systems was influenced by the bonding agent application method, and this trend was material dependent. The G2-Bond Universal exhibited the same or greater dentin bond durability to the other two-step adhesive systems.

Influence of masticating cycles and chewing patterns on inadvertent enamel wear caused by zirconia brackets.

Little information is available about enamel wear caused by zirconia brackets, an inadvertent side effect of orthodontic treatment. The purpose of this study was to examine potential enamel damage induced by contact with zirconia brackets. Sliding and impact wear simulations were performed using bovine enamel specimens positioned at a 25° slant to a zirconium ball to determine wear behaviour. Different chewing patterns, tapping and grinding, were simulated. Specimens were profiled using confocal laser scanning microscopy, and the mean maximum depth and surface roughness were measured. Scanning electron microscopy was also performed. The mean maximum depth of wear values differed according to the number of mastication cycles, with a higher number of cycles producing higher depths of wear. The facet wear depth was significantly greater with the tapping pattern than with the grinding pattern. Scanning electron microscopic observation of the wear facets revealed that surface textures at the edges were rougher than those at the centre of all facets. The results of this study indicated that enamel wear was induced by contact with zirconia brackets during the early period of mastication, and that the patterns and number of cycles of mastication affected the wear progression of enamel.

Immediate bond performance of resin composite luting systems to saliva-contaminated enamel and dentin in different curing modes.

The purpose of this study was to evaluate the immediate shear bond strength of resin composite luting systems to tooth with or without saliva contamination in different curing modes. The Knoop hardness number of the resin composite luting agents was measured. Four combinations of resin composite luting systems were used. The shear bond strength to bovine teeth was measured with and without saliva contamination in different curing modes at different storage periods. The Knoop hardness number of the resin composite luting agents was also evaluated. Significantly lower enamel and dentin shear bond strengths and Knoop hardness number values were observed in all resin composite luting systems at 5 min versus 24 h, regardless of the curing mode or saliva contamination. The influence of the curing mode of the resin composite luting systems on shear bond strengths and Knoop hardness number was dependent on material. For the saliva contamination conditions, only G-CEM ONE EM did not show any significant difference in shear bond strength among the groups with and without saliva contamination, regardless of curing mode, storage period, or tooth substrate. All the resin composite luting systems showed lower shear bond strengths and Knoop hardness number values immediately after setting.

A multicenter study of 1-year mortality and walking capacity after spinal fusion surgery for cervical fracture in elderly patients.

BACKGROUND: The 1-year mortality and functional prognoses of patients who received surgery for cervical trauma in the elderly remains unclear. The aim of this study is to investigate the rates of, and factors associated with mortality and the deterioration in walking capacity occurring 1 year after spinal fusion surgery for cervical fractures in patients 65 years of age or older. METHODS: Three hundred thirteen patients aged 65 years or more with a traumatic cervical fracture who received spinal fusion surgery were enrolled. The patients were divided into a survival group and a mortality group, or a maintained walking capacity group and a deteriorated walking capacity group. We compared patients' backgrounds, trauma, and surgical parameters between the two groups. To identify factors associated with mortality or a deteriorated walking capacity 1 year postoperatively, a multivariate logistic regression analysis was conducted. RESULTS: One year postoperatively, the rate of mortality was 8%. A higher Charlson comorbidity index (CCI) score, a more severe the American Spinal Cord Injury Association impairment scale (AIS), and longer surgical time were identified as independent factors associated with an increase in 1-year mortality. The rate of deterioration in walking capacity between pre-trauma and 1 year postoperatively was 33%. A more severe AIS, lower albumin (Alb) and hemoglobin (Hb) values, and a larger number of fused segments were identified as independent factors associated with the increased risk of deteriorated walking capacity 1 year postoperatively. CONCLUSIONS: The 1-year rate of mortality after spinal fusion surgery for cervical fracture in patients 65 years of age or older was 8%, and its associated factors were a higher CCI score, a more severe AIS, and a longer surgical time. The rate of deterioration in walking capacity was 33%, and its associated factors were a more severe AIS, lower Alb, lower Hb values, and a larger number of fused segments.

Analysis of the risk factors for increasing cervical sagittal vertical axis after cervical laminoplasty for cervical spondylotic myelopathy.

INTRODUCTION: The cervical sagittal vertical axis (cSVA) as another aspect of cervical alignment been recognized as one of the important factors affecting the pain and disability outcomes of cervical spine surgery. The purpose of the present study was to analyze the risk factors for increasing cSVA after cervical laminoplasty for cervical spondylotic myelopathy (CSM). MATERIALS AND METHODS: This retrospective study included 110 consecutive patients (68 males and 42 females, average age 72.6 years) who underwent laminoplasty for CSM between January 2007 and June 2018. We recorded the operative time, blood loss, Japanese Orthopaedic Association (JOA) score and the recovery rate. Radiological measurements were performed to analyze the following parameters: pre- and 1-year postoperative McGregor's slope (McGS), occiput to C2 Cobb angle (O-C2 angle), C2-C7 Cobb angle (C2-7 angle), T1-slope (T1S), C2-7 SVA (cSVA) and calculated the change (Δ). Patients were divided into two groups according to whether ΔcSVA was positive or negative. We also used Spearman's correlation coefficient and multiple regression analysis. RESULTS: ΔC2-7 angle, ΔT1S-preoperative C2-7 angle, ΔO-C2 angle were different between the two groups significantly. Correlation analysis between the ΔcSVA and the various sagittal parameters showed some independent explanatory factors including the ΔC2-7 angle (r = - 0.25, p = 0.010), T1S-preoperative C2-7 angle (r = - 0.28, p = 0.004), postoperative O-C2 angle (r = 0.26, p = 0.007), ΔO-C2 angle (r = 0.37, p = 0.001). Multiple regression analysis revealed that ΔcSVA was associated with the T1S-preoperative C2-7 angle (ß = - 0.25, p = 0.034) and ΔO-C2 angle (ß = 0.32, p = 0.001). CONCLUSIONS: The imbalance between T1S and preoperative C2-7 angle influences the change of cSVA after cervical laminoplasty. If cSVA increases postoperatively, the O-C2 angle increases to compensate and maintain the horizontal gaze.

Bond durability of universal adhesives to intact enamel surface in different etching modes.

This study aimed at determining the enamel bond durability of universal adhesives to intact enamel (IE) and ground enamel (GE) in different etching modes under thermal cycling (TC) and fatigue stresses. Two universal adhesives and a two-step self-etch adhesive were used. Enamel specimens were divided into four groups by treatment: (i) GE in etch-and-rinse, (ii) IE in etch-and-rinse, (iii) GE in self-etch, and (iv) IE in self-etch. Bonded specimens were subjected to TC, and then shear bond strengths (SBS) were conducted. SBS tests were also conducted after storage in 37°C water for 24 h (baseline). For shear fatigue strength (SFS) testing, bonded specimens were subjected to fatigue stress at a frequency of 10 Hz for 50,000 cycles. At baseline, all adhesives showed significantly higher SBS values with GE than IE in self-etch mode in contrast to in etch-and-rinse mode. After TC, the universal adhesives with IE showed lower SBS values than the baseline, regardless of the etching mode. Universal adhesives showed significantly lower SFS values with IE in etch-and-rinse, but not in self-etch mode. Phosphoric acid pre-etching or grinding of the aprismatic enamel may be helpful in establishing reliable initial and long-term bonds to enamel when using universal adhesives in self-etch mode.

Bonding and wear properties of self-adhesive flowable restorative materials.

The purpose of this study was to evaluate the bonding and wear properties of self-adhesive flowable restorative materials. Five self-adhesive flowable restorative materials were used. The study parameters were: (i) shear bond strengths; (ii) microleakage; (iii) occlusal wear; and (iv) qualitative evaluation of the bonding interface. The range of shear bond strengths of the materials was as follows: 7.4-12.2 MPa to ground enamel, 22.5-32.5 MPa to etched enamel, and 1.3-4.2 MPa to dentin. The microleakage scores of the materials did not show any statistically significant differences regardless of the presence or absence of etching. The wear facets on the materials showed 0.099-0.447 mm3 of volume loss and 148.6-365.3 µm maximum depth, with statistically significant differences between materials. Scanning electron microscopic images of the interfaces of the materials showed good adaptation regardless of substrate. The bonding and wear properties of self-adhesive flowable restorative materials were still limited and showed lower values than previously reported results for nanofilled composites with an adhesive system. Selective enamel etching can improve the bonding performance of these materials.

Effect of double-layer application on the early enamel bond strength of universal adhesives.

OBJECTIVES: The present study aimed to investigate the changes in the enamel bond strengths of universal adhesives in the early phase of specimen creation and evaluate the effect of double-layer application on enamel bond effectiveness using different etching modes. METHOD: Four universal adhesives, namely Clearfil Universal Bond Quick, G-Premio Bond, Scotchbond Universal, and Tokuyama Universal Bond, were used. Clearfil SE Bond two-step self-etch adhesive system was used as a comparison. Fifteen specimens per group were used for determining the shear bond strength (SBS) to bovine enamel in the etch-and-rinse or self-etch mode. The adhesive was applied to specimens in accordance with the manufacturers' instructions (single-layer application), or the adhesive was applied twice (double-layer application). The bonded specimens were stored in distilled water at 37 °C for 5 min or 1, 6, 12, or 24 h before SBS testing. The flexural properties of the resin composite Clearfil AP-X were measured for the same storage periods. RESULTS: All universal adhesives exhibited increased SBS values with prolonged storage periods regardless of the application technique or etching mode used. Double-layer application was associated with higher SBS values than single-layer application for most universal adhesives over the same storage period. CONCLUSION: Phosphoric acid pre-etching and double-layer application of universal adhesives resulted in increased enamel bond strength in the early phase of specimen bonding. CLINICAL RELEVANCE: Care should be taken when using universal adhesives in the self-etch mode for enamel bonding because the enamel adhesion is sensitive to the duration after filling.

Influence of light irradiation for in-office tooth whitening: A randomized clinical study.

PURPOSE: To evaluate the influence of light irradiation on the clinical efficiency of an in-office whitening agent. METHODS: The in-office whitening agent (Opalescence Boost 35%) was used in this study. Two whitening regimens were evaluated on maxillary anterior teeth: (1) with light irradiation; and (2) without light irradiation. The ΔE*, changes of L*, a*, b*, and the best shade match on the central incisor before, immediately after, and 6 months after whitening procedures were evaluated using a dental spectrophotometer. RESULTS: The ΔE and shade had no significant differences with or without light irradiation. In addition, the ΔE, changes of L*, a*, b*, and shade did not change over 6 months after bleaching at a level detectable to the naked eye. The results suggested that the in-office whitening agent using 35% hydrogen peroxide without photocatalysts can improve tooth color with or without light irradiation for 6 months after whitening. CLINICAL SIGNIFICANCE: In office whitening using 35% hydrogen peroxide without photocatalysts should be considered as a good treatment option for vital teeth whitening.

Ultrasonic measurement of dentin remineralization effects of dentifrices and silver diamine fluoride.

OBJECTIVE: This study investigated the dentin remineralization effect of the application of a functionalized tri-calcium phosphate (fTCP) dentifrice and a silver diamine fluoride (SDF) solution. MATERIAL AND METHODS: The materials used were: a fluoride-containing dentifrice with fTCP (fTCP＋), a fluoride-containing dentifrice without fTCP (fTCP-) and a 38% SDF solution. Following treatment, the dentin slabs were immersed in a 0.1-M lactic acid buffer solution and then placed in artificial saliva. This procedure was repeated three times daily for 28 days. The propagation time of longitudinal ultrasonic velocities (UV) and the Knoop hardness (KH) of the samples were measured. The samples were also observed using scanning electron microscopy. RESULTS: The SDF and fTCP＋ groups showed higher UV than the fTCP - group regardless of the application method. The F-SDF group at 28 days showed significantly higher UV (4121 ± 102 m/s) than the F-fTCP + group (3731 ± 65 m/s) (p < .05). The F-SDF group at 28 days showed significantly higher KH (47.4 ± 2.2) than the F-fTCP＋ group (43.3 ± 1.0) and the F-fTCP - group (42.9 ± 2.1) (p < .05). Closure of the dentinal tubules and crystal precipitation was detected on the surface of the fTCP＋ group to a greater extent than the fTCP - group. CONCLUSIONS: The fTCP-containing dentifrice and SDF solution effectively enhanced bovine dentin remineralization.

Evaluation of structural coloration of experimental flowable resin composites.

OBJECTIVE: To examine the effect of filler contentTo examine the effect of filler content on structural coloration of experimental flowable resin composites. OVERVIEW: Experimental composites containing spherical fillers and different filler contents (30, 40, 50, 60 and 70 wt%), a structural colored resin composite (Omnichroma), and a nanohybrid flowable resin composite (Gracefil LoFlo) were used. The optical characteristics of the specimens were measured on standard black and white backgrounds using a spectrophotometer under CIE D65 illuminant and the L*a*b* values were determined. The color matching abilities to artificial teeth were evaluated using the ΔE*ab and ΔE00 color difference formulas. One-way analysis of variance and Tukey's post hoc test were used. The spectral reflectance of experimental composites showed different trends in different backgrounds, plate thickness, and filler contents. In particular, higher spectral reflectance was observed on the white background at wavelengths ranging from 450 to 700 nm in both 1.5 and 3.0 mm plates when compared to the black background. The percent reflectivity tended to decrease with a decrease of the filler contents. The color matching abilities of the experimental composites improved with the increase in the filler contents. CONCLUSIONS: Structural coloration of the flowable resin composites were affected by the filler contents. CLINICAL SIGNIFICANCE: Clinical Significance: Higher filler contents might be needed to achieve the optimal color properties of structural colored flowable resin composites, thereby improving the restoration esthetics.

Fibrinogen level on admission is a predictive marker of the need for massive blood transfusion after pelvic fracture.

OBJECTIVE: This study aimed to evaluate the usefulness of coagulation biomarkers as predictors of the need for massive transfusion (MT) in patients with pelvic fractures. METHODS: Patients who were treated for pelvic fractures in our hospital were divided into 2 groups: MT and non-MT. MT was defined as the transfusion of packed red blood cells (PRBCs) ≧10 units caused by bleeding within 24 h after admission. We compared variables between two groups, including vital signs, the scoring system and blood sample test. Additionally, we performed a multiple logistic regression analysis and a receiver operating characteristic curve analysis to reveal which value was the most useful predictive marker for MT in patients with pelvic fracture. RESULTS: There were 22 patients in the MT group and 78 patients in the non-MT group. Patients in the MT group had significantly higher ISS than did those in the non-MT group. In contrast, the patients in the MT group had significantly lower RTS, TRISS Ps, sBP, Hb, lactate, BE, and Fbg levels. Lower sBP and Fbg levels were independent predictors for MT. The optimal cut-off values for sBP and Fbg levels were ≦109 mmHg and 193.0 mg/dL, respectively. CONCLUSIONS: The results of the study indicated that Fbg levels on admission can be an independent predictor of MT in patients with pelvic fractures. The optimal cut-off value of Fbg for MT prediction in this study was 193.0 mg/dL.

Comparison of dentin bond durability of a universal adhesive and two etch-and-rinse adhesive systems.

OBJECTIVE: This study aimed to compare dentin bond durability under different degradation conditions between two etch-and-rinse (ER) systems and a universal adhesive in ER mode. METHOD: This study used a universal adhesive [Scotchbond Universal (SU)], a three-step ER adhesive [Scotchbond Multi-Purpose Plus (SM)], and a two-step ER adhesive [Single Bond Plus (SB)]. A phosphoric acid-etching agent was applied to bovine dentin prior to the application of either a primer or the adhesive. After acid etching, bonding procedures were conducted. The specimens were divided into three group classes: (1) subjected to 10,000, 30,000, or 50,000 thermal cycles (TC); (2) stored in distilled water at 37 °C for 6 months or 1 year (WS); and (3) stored in distilled water for 24 h (baseline). Shear bond strength (SBS) tests were conducted. RESULTS: SB showed a higher baseline SBS than the other adhesives. Defining the baseline SBS value for each adhesive system as 100%, TC groups ranged from 56.1 to 70.3% for SM, from 98.4 to 103.7% for SB, and from 120.3 to 126.7% for SU. WS groups ranged from 66.2 to 71.4% for SM, from 98.1 to 103.3% for SB, and from 102.5 to 118.1% for SU. CONCLUSIONS: Although SB showed relatively stable dentin bond performance under all degradation conditions, SM showed decreased dentin SBS with prolonged degradation. SU did not show any significant decrease in SBS from the baseline under any degradation condition. CLINICAL RELEVANCE: The universal adhesive showed comparable adhesive performance with the two-step ER adhesive.