RESUMEN
Despite its unique physicochemical properties, the catalytic application of nickel carbide (Ni3 C) in organic synthesis is rare. In this study, we report well-defined nanocrystalline Ni3 C (nano-Ni3 C) as a highly active catalyst for the selective hydrogenation of nitriles to primary amines. The activity of the aluminum-oxide-supported nano-Ni3 C (nano-Ni3 C/Al2 O3 ) catalyst surpasses that of Ni nanoparticles. Various aromatic and aliphatic nitriles and dinitriles were successfully converted to the corresponding primary amines under mild conditions (1â bar H2 pressure). Furthermore, the nano-Ni3 C/Al2 O3 catalyst was reusable and applicable to gram-scale experiments. Density functional theory calculations suggest the formation of polar hydrogen species on the nano-Ni3 C surface, which were attributed to the high activity of nano-Ni3 C towards nitrile hydrogenation. This study demonstrates the utility of metal carbides as a new class of catalysts for liquid-phase organic reactions.
RESUMEN
The hydroboration of alkynes with bis(pinacolato)diboron is a useful method for the synthesis of vinyl boronate esters, which are essential intermediates in organic syntheses. Copper catalysts have been used extensively in these reactions. However, previously reported Cu-catalyst systems inevitably require additives and elevated temperatures. Herein, we report, for the first time, a simple and efficient hydroboration of alkynes under additive-free and mild reaction conditions (i.e., at a temperature of 30 °C) using a copper nitride nanocube (Cu3N NC) catalyst. A wide range of alkynes can be transformed into their corresponding boronate esters. Cu3N NCs are also applicable in the hydroboration of alkynes with tetrahydroxydiboron to synthesize vinyl boronic acids. Moreover, the Cu3N NCs were easily separated by simple filtration and could be reused several times without any loss of their original activity. Hence, these highly active and reusable Cu3N NC catalysts offer an environmentally friendly route for the efficient production of vinyl boronates.
RESUMEN
Non-noble metal-based hydrogenation catalysts have limited practical applications because they exhibit low activity, require harsh reaction conditions, and are unstable in air. To overcome these limitations, herein we propose the alloying of non-noble metal nanoparticles with phosphorus as a promising strategy for developing smart catalysts that exhibit both excellent activity and air stability. We synthesized a novel nickel phosphide nanoalloy (nano-Ni2 P) with coordinatively unsaturated Ni active sites. Unlike conventional air-unstable non-noble metal catalysts, nano-Ni2 P retained its metallic nature in air, and exhibited a high activity for the hydrogenation of various substrates with polar functional groups, such as aldehydes, ketones, nitriles, and nitroarenes to the desired products in excellent yields in water. Furthermore, the used nano-Ni2 P catalyst was easy to handle in air and could be reused without pretreatment, providing a simple and clean catalyst system for general hydrogenation reactions.
RESUMEN
Copper nitride (Cu3N) was used as a heterogeneous catalyst for the hydroxylation of aryl halides under ligand-free conditions. The cubic Cu3N nanoparticles showed high catalytic activity, comparable to those of conventional Cu catalysts with nitrogen ligands, demonstrating that the nitrogen atoms in Cu3N act as functional ligands that promote hydroxylation.
RESUMEN
Exploring novel catalysis by less common, metal-non-metal nanoalloys is of great interest in organic synthesis. We herein report a titanium-dioxide-supported nickel phosphide nanoalloy (nano-Ni2P/TiO2) that exhibits high catalytic activity for the deoxygenation of sulfoxides. nano-Ni2P/TiO2 deoxygenated various sulfoxides to sulfides under 1 bar of H2, representing the first non-noble metal catalyst for sulfoxide deoxygenation under ambient H2 pressure. Spectroscopic analyses revealed that this high activity is due to cooperative catalysis by nano-Ni2P and TiO2.
RESUMEN
The environmental impact of CO2 emissions via the use of fossil resources as chemical feedstock and fuels has stimulated research to utilize renewable biomass feedstock. The biogenic compounds such as polyols are highly oxygenated and their valorization requires the new methods to control the oxygen to carbon ratio of the chemicals. The catalytic cleavage of C-O bonds and C-C bonds is promising methods, but the conventional catalyst systems encounter the difficulty to obtain the high yields of the desired products. This review describes our recent development of the high performance heterogeneous catalysts for the valorization of the biogenic chemicals such as glycerol, furfural, and levulinic acid via selective cleavage of C-O bonds and C-C bonds in the liquid-phase. Selective C-O bond cleavage by hydrogenolysis enables production of various diols useful as engineering plastics, antifreeze, and cosmetics in high yields. The success of the selective C-C bond scission of levulinic acid can be applied to a wide range of the biogenic oxygenates such as carboxylic acids, esters, lactones, and primary alcohols, in which the selective C-C bond scission at adjacent to the oxygen functional groups are achieved. Furthermore, valorization of glycerol by selective acetylation and acetalization, and of levulinic acid by hydrogenation is described. Our catalysts show excellent performance compared to the reported catalysts in the aforementioned valorization.
RESUMEN
Hydrogenation of amides to amines is an important reaction, but the need for high temperatures and H2 pressures is a problem. Catalysts that are effective under mild reaction conditions, that is, lower than 30â bar H2 and 70 °C, have not yet been reported. Here, the mild hydrogenation of amides was achieved for the first time by using a Pt-V bimetallic catalyst. Amide hydrogenation, at either 1â bar H2 at 70 °C or 5â bar H2 at room temperature was achieved using the bimetallic catalyst. The mild reaction conditions enable highly selective hydrogenation of various amides to the corresponding amines, while inhibiting arene hydrogenation. Catalyst characterization showed that the origin of the catalytic activity for the bimetallic catalyst is the oxophilic V-decorated Pt nanoparticles, which are 2â nm in diameter.
RESUMEN
We devise a new and green route for the multi-gram synthesis of core-shell nanoparticles (NPs) in one step under organic-free and pH-neutral conditions. Simply mixing core and shell metal precursors in the presence of solid metal oxides in water allowed for the facile fabrication of small CeO2 -covered Au and Ag nanoparticles dispersed on metal oxides in one step. The CeO2 -covered Au nanoparticles acted as a highly efficient and reusable catalyst for a series of chemoselective hydrogenations, while retaining C=C bonds in diverse substrates. Consequently, higher environmental compatibility and more efficient energy savings were achieved across the entire process, including catalyst preparation, reaction, separation, and reuse.
RESUMEN
We report a facile synthesis of new core-Au/shell-CeO2 nanoparticles (Au@CeO2) using a redox-coprecipitation method, where the Au nanoparticles and the nanoporous shell of CeO2 are simultaneously formed in one step. The Au@CeO2 catalyst enables the highly selective semihydrogenation of various alkynes at ambient temperature under additive-free conditions. The core-shell structure plays a crucial role in providing the excellent selectivity for alkenes through the selective dissociation of H2 in a heterolytic manner by maximizing interfacial sites between the core-Au and the shell-CeO2.
RESUMEN
Hydroxyapatite-supported gold nanoparticles (Au/HAP) can act as a highly active and reusable catalyst for the coupling of hydrosilanes with amines under mild conditions. Various silylamines can be selectively obtained from diverse combinations of equimolar amounts of hydrosilanes with amines including less reactive bulky hydrosilanes. This study also highlights the applicability of Au/HAP to the selective synthesis of silylamides through the coupling of hydrosilanes with amides, demonstrating the first example of an efficient heterogeneous catalyst. Moreover, Au/HAP shows high reusability and applicability for gram-scale synthesis.
RESUMEN
Two high-performance Cu catalysts were successfully developed by immobilization of Cu ions in the nanospaces of poly(propylene imine) (PPI) dendrimer and magadiite for the selective C-C coupling of 2,6-dimethylphenol (DMP) to 3,3',5,5'-tetramethyldiphenoquinone (DPQ) with O2 as a green oxidant. The PPI dendrimer encapsulated Cu ions in the internal nanovoids to form adjacent Cu species, which exhibited significantly high catalytic activity for the regioselective coupling reaction of DMP compared to previously reported enzyme and metal complex catalysts. The magadiite-immobilized Cu complex acted as a selective heterogeneous catalyst for the oxidative C-C coupling of DMP to DPQ. This heterogeneous catalyst was recoverable from the reaction mixture by simple filtration, reusable without loss of efficiency, and applicable to a continuous flow reactor system. Detailed characterization using ultraviolet-visible (UV-vis), Fourier transform infrared (FTIR), electronic spin resonance (ESR), and X-ray absorption fine structure (XAFS) spectroscopies and the reaction mechanism investigation revealed that the high catalytic performances of these Cu catalysts were ascribed to the adjacent Cu species generated within the nanospaces of the PPI dendrimer and magadiite.
Asunto(s)
Cobre/química , Oxígeno/química , Quinonas/química , Xilenos/química , Catálisis , Oxidación-ReducciónRESUMEN
The first demonstration of the hydrogenation of sulfoxides under atmospheric H2 pressure is reported. The highly efficient reaction is facilitated by a heterogeneous Ru nanoparticle catalyst. The mild reaction conditions enable the selective hydrogenation of a wide range of functionalized sulfoxides to the corresponding sulfides. The high redox ability of RuO(x) nanoparticles plays a key role in the hydrogenation.
Asunto(s)
Rutenio/química , Sulfuros/química , Sulfóxidos/química , Catálisis , Hidrogenación , Estructura Molecular , NanopartículasRESUMEN
O2 is acting! A nanosized hydroxylapatite-supported Au nanoparticle (NP) catalyst exhibited high activity under aerobic conditions, and various silyl ethers could be obtained from diverse combinations of silanes with alcohols. Moreover, O2 was found to act not as a stoichiometric oxidizing reagent, but as a non-consumed promoter, significantly boosting the catalytic activity of AuNPs.
Asunto(s)
Éteres/química , Oro/química , Nanopartículas del Metal/química , Oxígeno/química , Silanos/química , Alcoholes/química , CatálisisRESUMEN
Selective silver: A core-shell AgNP-CeO2 nanocomposite (AgNP@CeO2) acted as an effective catalyst for the chemoselective reductions of unsaturated aldehydes to unsaturated alcohols with H2 (see figure). Maximizing the AgNP-CeO2 interaction successfully induced the heterolytic cleavage of H2, resulting in highly chemoselective reductions. Furthermore, a highly dispersed AgNP@CeO2 system was also developed that exhibited a higher activity than the original AgNP@CeO2.
RESUMEN
A 100% atom-efficient synthesis of ketones from electron-deficient internal olefins was achieved using O2 as a "green" oxidant (see scheme, DMA=N,N-dimethylacetamide, EWG=electron-withdrawing group). Various electron-deficient olefins were oxidized to the corresponding ketones with over 99% selectivity and without the formation of olefin isomers or their oxidized products.
RESUMEN
Iron-based heterogeneous catalysts are ideal metal catalysts owing to their abundance and low-toxicity. However, conventional iron nanoparticle catalysts exhibit extremely low activity in liquid-phase reactions and lack air stability. Previous attempts to encapsulate iron nanoparticles in shell materials toward air stability improvement were offset by the low activity of the iron nanoparticles. To overcome the trade-off between activity and stability in conventional iron nanoparticle catalysts, we developed air-stable iron phosphide nanocrystal catalysts. The iron phosphide nanocrystal exhibits high activity for liquid-phase nitrile hydrogenation, whereas the conventional iron nanoparticles demonstrate no activity. Furthermore, the air stability of the iron phosphide nanocrystal allows facile immobilization on appropriate supports, wherein TiO2 enhances the activity. The resulting TiO2-supported iron phosphide nanocrystal successfully converts various nitriles to primary amines and demonstrates high reusability. The development of air-stable and active iron phosphide nanocrystal catalysts significantly expands the application scope of iron catalysts.
RESUMEN
The catalytic hydrodeoxygenation (HDO) of carbonyl oxygen in esters using H2 is an attractive method for synthesizing unsymmetrical ethers because water is theoretically the sole coproduct. Herein, we report a heterogeneous catalytic system for the selective HDO of esters to unsymmetrical ethers over a zirconium oxide-supported platinum-molybdenum catalyst (Pt-Mo/ZrO2). A wide range of esters were transformed into the corresponding unsymmetrical ethers under mild reaction conditions (0.5 MPa H2 at 100 °C). The Pt-Mo/ZrO2 catalyst was also successfully applied to the conversion of a biomass-derived triglyceride into the corresponding triether. Physicochemical characterization and control experiments revealed that cooperative catalysis between Pt nanoparticles and neighboring molybdenum oxide species on the ZrO2 surface plays a key role in the highly selective HDO of esters. This Pt-Mo/ZrO2 catalyst system offers a highly efficient strategy for synthesizing unsymmetrical ethers and broadens the scope of sustainable reaction processes.
RESUMEN
The modification of metal nanoparticles (NPs) by incorporating additional metals is a key technique for developing novel catalysts. However, the effects of incorporating nonmetals into metal NPs have not been widely explored, particularly in the field of organic synthesis. In this study, we demonstrate that phosphorus (P)-alloying significantly increases the activity of precious metal NPs for the deoxygenation of sulfoxides into sulfides. In particular, ruthenium phosphide NPs exhibit an excellent catalytic activity and high durability against sulfur-poisoning, outperforming conventional catalysts. Various sulfoxides, including drug intermediates, were deoxygenated to sulfides with excellent yields. Detailed investigations into the structure-activity relationship revealed that P-alloying plays a dual role: it establishes a ligand effect on the electron transfer from Ru to P, facilitating the production of active hydrogen species, and has an ensemble effect on the formation of the Ru-P bond, preventing strong coordination with sulfide products. These effects combine to increase the catalytic performance of ruthenium phosphide NPs. These results demonstrate that P-alloying is an efficient method to improve the metal NP catalysis for diverse organic synthesis.
RESUMEN
We have developed a highly efficient and green catalytic deoxygenation of epoxides to alkenes using gold nanoparticles (NPs) supported on hydrotalcite [HT: Mg(6)Al(2)CO(3)(OH)(16)] (Au/HT) with alcohols, CO/H(2)O or H(2) as the reducing reagent. Various epoxides were selectively converted to the corresponding alkenes. Among the novel metal NPs on HT, Au/HT was found to exhibit outstanding catalytic activity for the deoxygenation reaction. Moreover, Au/HT can be separated from the reaction mixture and reused with retention of its catalytic activity and selectivity. The high catalytic performance of Au/HT was attributed to the selective formation of Au-hydride species by the cooperative effect between Au NPs and HT.
Asunto(s)
Alquenos/química , Compuestos Epoxi/química , Oro/química , Nanopartículas del Metal/química , Hidróxido de Aluminio/química , Catálisis , Hidróxido de Magnesio/químicaRESUMEN
Although transition metal phosphides are well studied as electrocatalysts and hydrotreating catalysts, the application of metal phosphides in organic synthesis is rare, and cooperative catalysis between metal phosphides and supports remains unexplored. Herein, we report that a cerium dioxide-supported nickel phosphide nanoalloy (nano-Ni2P/CeO2) efficiently promoted the C-3 alkylation of oxindoles with alcohols without any additives through the borrowing hydrogen methodology. Oxindoles were alkylated with various alcohols to provide the corresponding C-3 alkylated oxindoles in high yields. This is the first catalytic system for the C-3 alkylation of oxindoles with alcohols using a non-precious metal-based heterogeneous catalyst. The catalytic activity of nano-Ni2P/CeO2 was comparable to that reported for precious metal-based catalysts. Moreover, nano-Ni2P/CeO2 was easily recoverable and reusable without any significant loss of activity. Control experiments revealed that the Ni2P nanoalloy and the CeO2 support functioned cooperatively, leading to a high catalytic performance.