Amendment of Sargassum oligocystum bio-char with MnFe2O4 and lanthanum MOF obtained from PET waste for fluoride removal: A comparative study.

The use of biomass and waste to produce adsorbent reduces the cost of water treatment. The bio-char of Sargassum oligocystum (BCSO) was modified with MnFe2O4 magnetic particles and La-metal organic framework (MOF) to generate an efficient adsorbent (BCSO/MnFe2O4@La-MOF) for fluoride ions (F-) removal from aqueous solutions. The performance of BCSO/MnFe2O4@La-MOF was compared with BCSO/MnFe2O4 and BCSO. The characteristics of the adsorbents were investigated using various techniques, which revealed that the magnetic composites were well-synthesized and exhibited superparamagnetic properties. The maximum adsorption efficiencies (BCSO: 97.84%, BCSO/MnFe2O4: 97.85%, and BCSO/MnFe2O4@La-MOF: 99.36%) were achieved under specific conditions of pH 4, F- concentration of 10 mg/L, and adsorbent dosage of 3, 1.5, and 1 g/L for BCSO, BCSO/MnFe2O4, and BCSO/MnFe2O4@La-MOF, respectively. The results demonstrated that the experimental data adheres to a pseudo-second-order kinetic model. The enthalpy, entropy, and Gibbs free energy were determined to be negative; thus, the F- adsorption was exothermic and spontaneous in the range of 25-50 °C. The equilibrium data of the process exhibited conformity with the Langmuir model. The maximum adsorption capacities of F- ions were determined as 10.267 mg/g for BCSO, 14.903 mg/g for the BCSO/MnFe2O4, and 31.948 mg/g for BCSO/MnFe2O4@La-MOF. The KF and AT values for the F- adsorption were obtained at 21.03 mg/g (L/mg)1/n and 100 × 10+9 L/g, indicating the pronounced affinity of the BCSO/MnFe2O4@La-MOF towards F- than other samples. The significant potential of the BCSO/MnFe2O4@La-MOF magnetic composite for F- removal from industrial wastewater, makes it suitable for repeated utilization in the adsorption process.

Effectiveness of Group Spiritual Care on Leukemia Patients' Hope and Anxiety in Iran: A Randomized Controlled Trial.

This study examined the effectiveness of a group spiritual care program on leukemia patients' hope and anxiety. This randomized controlled trial involved 94 leukemia patients hospitalized in the two oncology departments of Shahid Beheshti Hospital, Hamadan, Iran. This study was carried out from November 2022 to April 2023. The participants were selected based on the study inclusion criteria using the convenience sampling method then they were randomized to either the experimental (N = 46) or the control group (N = 48). The participants completed the written informed consent form, the demographic information form, and Beck's anxiety and Snyder's hope questionnaires. The spiritual care program was provided in six sessions (one 45-60 min per week), including a spiritual needs assessment, religious care, spiritual care, psychological-spiritual care, supportive-spiritual care, and evaluation. The participants then completed Beck's anxiety and Snyder's hope questionnaires immediately, one and two months after the intervention. At baseline, there was no significant between-group difference in leukemia patients' mean scores of hope (P = 0.313) and anxiety (P = 0.141); however, immediately, one and two months after the intervention, a significant between-group difference in the mean scores of hope and anxiety was observed (P < 0.001). Also, from baseline to two months after the intervention, a significant decrease and increase in anxiety and hope mean scores, respectively, were observed in the experimental group (within-group difference) (P < 0.001). However, in the control group, from baseline to two months after the intervention, a significant increase and decrease in mean scores of anxiety and hope, respectively, were observed (within-group difference) (P < 0.001). As a result, it is recommended that nurses should consider providing spiritual care to leukemia patients as a part of holistic care.

Genetic diversity, linkage disequilibrium, and population structure of tetraploid wheat landraces originating from Europe and Asia.

BACKGROUND: Durum wheat is one of the most important crops, especially in the Mediterranean region. Insight into the genetic diversity of germplasm can improve the breeding program management in various traits. This study was done using single nucleotide polymorphisms (SNP) markers to characterize the genetic distinctiveness and differentiation of tetraploid wheat landraces collected from nine European and Asian countries. A sum of 23,334 polymorphic SNPs was detected in 126 tetraploid wheat landraces in relation to the reference genome. RESULTS: The number of identified SNPs was 11,613 and 11,721 in A and B genomes, respectively. The highest and lowest diversity was on 6B and 6 A chromosomes, respectively. Structure analysis classified the landraces into two distinct subpopulations (K = 2). Evaluating the principal coordinate analysis (PCoA) and weighted pair-group method using arithmetic averages (WPGMA) clustering results demonstrated that landraces (99.2%) are categorized into one of the two chief subpopulations. Therefore, the grouping pattern did not clearly show the presence of a clear pattern of relationships between genetic diversity and their geographical derivation. Part of this result could be due to the historical exchange between different germplasms. Although the result did not separate landraces based on their region of origin, the landraces collected from Iran were classified into the same group and cluster. Analysis of molecular variance (AMOVA) also confirmed the results of population structure. Finally, Durum wheat landraces in some countries, including Turkey, Russia, Ukraine, and Afghanistan, were highly diverse, while others, including Iran and China, were low-diversity. CONCLUSION: The recent study concluded that the 126 tetraploid wheat genotypes and their GBS-SNP markers are very appropriate for quantitative trait loci (QTLs) mapping and genome-wide association studies (GWAS). The core collection comprises two distinct subpopulations. Subpopulation II genotypes are the most diverse genotypes, and if they possess desired traits, they may be used in future breeding programs. The degree of diversity in the landraces of countries can provide the ground for the improvement of new cultivars with international cooperation. linkage disequilibrium (LD) hotspot distribution across the genome was investigated, which provides useful information about the genomic regions that contain intriguing genes.

A population study on factors associated with unintentional falls among Iranian older adults.

INTRODUCTION: Falls among older adults are a significant cause of disability, injury, and death worldwide. The high incidence of falls in older adults, combined with the increased susceptibility to injury of the older adult population, leads to severe global health issues. Further studies are needed to comprehensively evaluate the typical personal and environmental risk factors of falls in the Iranian elderly population. Future preventive strategies and intervention programs will be based on these findings. The study determined the risk factors associated with unintentional falls among a representative sample of older adults living in Tehran, the capital city of Iran. METHODS: The study design was cross-sectional. The target population was men/women aged 65 years and over from the general population living in 22 different districts of Tehran who were selected by stratified random sampling. The researchers gathered the data using validated questionnaires and observations. The informed consent was obtained from all participants before starting the interview. Multivariate logistic regression analysis examined the association between falls occurring during the past 12 months with demographics/ socioeconomics and fall-related predictor factors. RESULTS: The risk of falls was higher in women (47.0%) and those aged ≥ 75 years (44.1%). Older adults who were married had their fall risk reduced by 36.4% compared with other types of marital status. Older adults who were illiterate (48.1%), housewives (47.0%), and always had concerns about living expenses (53.9%) tended significantly to have a higher risk of falls. Moreover, participants who live with their family were less likely to fall than those who live alone (36.5% vs. 40.4%). Persons with safe homes were less likely to experience falls than persons with unsafe homes (30.9% vs. 41.4%). The logistic regression analysis showed that the female gender, being worried about living expenses, home safety, functional behavior, and function factors, were independently associated with the risk of falls during the past 12 months. CONCLUSIONS: Our findings revealed that a wide range of intrinsic and extrinsic risk factors contributed to injurious falls; based on the literature, some are preventable. The present data may be helpful as a starting point and guide future efforts for health providers and policymakers to allocate additional resources and develop proper falls prevention or intervention programs at the community level.

Modification and improvement of biodegradable packaging films by cold plasma; a critical review.

Cold plasma is one of the techniques used in recent years to improve the functionality and interfacial attributes of biopolymers. Employing cold plasma for the treatment and modification of biopolymers possesses several advantages including its biocompatibility, elimination of toxic solvents usage, treatment consistency, and appropriateness for heat-sensitive ingredients. Most studies have presented the efficacious use of cold plasma treatment in improving structural, mechanical and thermal properties of film composites. In addition, cold plasma improves the film surface characteristics, particularly in protein-based films, through bringing up the polar functional groups onto the bio-composite surface, consequently increasing roughness, improving printability, increasing adhesion, and reducing contact angle; while it is not effective in the improvement of water vapor permeability of edible films. Cold plasma-treated edible packaging films experienced significant improvement where exposed to microbial contaminations, mainly due to the non-thermal nature of cold plasma technology leading to the protection of antimicrobial potency of bioactive compounds and antimicrobial constitutes. Therefore, it can be concluded that cold plasma treatment is an innovative strategy to strengthen the edible film characteristics as a promising alternative to the currently used chemical and physical modification approaches.

Cadmium ion removal from aqueous media using banana peel biochar/Fe3O4/ZIF-67.

In the present study, banana peel waste was used as a suitable source for biochar production. The banana peel biochar (BPB) was modified using Fe3O4 magnetic and ZIF-67 nanoparticles. The modification of the BPB surface (4.70 m2/g) with Fe3O4 and Fe3O4/ZIF-67 significantly increased the specific surface of the nanocomposites (BPB/Fe3O4: 78.83 m2/g, and BPB/Fe3O4/ZIF-67: 1212.40 m2/g). The effect of pH, temperature, contact time, adsorbent dose, and concentration of Cd2+ on the efficiency of the Cd2+ adsorption was explored. Maximum adsorption efficiencies for BPB (97.76%), BPB/Fe3O4 (97.52%), and BPB/Fe3O4/ZIF-67 (99.14%) were obtained at pH 6, Cd2+ concentration of 10 mg/L, times of 80 min, 50 min, and 40 min, and adsorbent doses of 2 g/L, 1.5 g/L, and 1 g/L, respectively. Thermodynamic measurements indicated that the process is spontaneous and exothermic. The maximum capacity of Cd2+ adsorption using BPB, BPB/Fe3O4, and BPB/Fe3O4/ZIF-67 were obtained 20.63 mg/g, 30.33 mg/g, and 50.78 mg/g, respectively. The Cd2+ adsorption using magnetic nanocomposites followed the pseudo-first-order kinetic model. The results showed that studied adsorbents especially BPB/Fe3O4/ZIF-67 have a good ability to adsorb-desorb Cd2+ and clean an effluent containing pollutants.

Adsorption ability evaluation of the poly(methacrylic acid-co-acrylamide)/cloisite 30B nanocomposite hydrogel as a new adsorbent for cationic dye removal.

The performance of poly(methacrylic acid-co-acrylamide)/Cloisite 30B nanocomposite (poly(MAA-co-AAm)/Cl30B) hydrogel to adsorb methylene blue (MB) dye from aqueous solutions was investigated and the adsorption efficiency was improved by incorporating Cloisite 30B nanoclays in the adsorbent structure. The hydrogels were analyzed using FTIR, XRD, TGA, and SEM analysis. The effect of adsorbent dose, temperature, initial dye concentration, contact time, and pH on the efficiency of the adsorption process was investigated. Adsorption efficiencies of 98.57 and 97.65% were obtained for poly(MAA-co-AAm)/Cl30B nanocomposite and poly(MAA-co-AAm) hydrogels, respectively. Kinetic study revealed that the adsorption process followed pseudo-first-order kinetic model and α-parameter values of 6.558 and 1.113 mg/g.min were obtained for poly(MAA-co-AAm)/Cl30B nanocomposite and poly(MAA-co-AAm) hydrogels, respectively indicating a higher ability of nanocomposite hydrogel in adsorbing MB-dye. In addition, the results of the intra-particle diffusion model showed that various mechanisms such as intra-particle diffusion and liquid film penetration are important in the adsorption. The Gibbs free energy parameter of adsorption process showed negative values of -256.52 and -84.071 J/mol.K for poly(MAA-co-AAm)/Cl30B nanocomposite and poly(MAA-co-AAm) hydrogels indicating spontaneous nature of the adsorption. The results of enthalpy and entropy showed that the adsorption process was exothermic and random collisions were reduced during the adsorption. The equilibrium data for the adsorption process using poly(MAA-co-AAm)/Cl30B nanocomposite and poly(MAA-co-AAm) hydrogels followed Freundlich and Langmuir isotherm models, respectively. The maximum adsorption capacity values of 32.83 and 21.92 mg/g were obtained for poly(MAA-co-AAm)/Cl30B nanocomposite and poly(MAA-co-AAm) hydrogels, respectively. Higher adsorption capacity of nanocomposite hydrogel was attributed to the presence of Cloisite 30B clay nanoparticles in its structure. In addition, results of RL, n, and E parameters showed that the adsorption process was performed optimally and physically.

Efficacy of the Synbiotic Supplementation on the Metabolic Factors in Patients with Metabolic Syndrome: A Randomized, Triple-Blind, Placebo-Controlled Trial.

Background: Metabolic syndrome is overwhelmingly increasing and is a significant risk factor for cardiovascular disorder, so effective treatment strategies are considered high priority. This study aimed to determine the effects of synbiotic supplementation on metabolic factors in patients with metabolic syndrome. Methods: In this triple-blind, randomized, placebo-controlled, clinical trial, 108 participants were divided into two groups to receive synbiotic supplementation or placebo for 12 weeks. All participants were also educated about maintaining a healthy lifestyle and consuming low-calorie nutritious meals, along with dietary intake and physical activity monitoring. Anthropometric measures, blood pressure, glycemic indices, lipid profile, hepatic enzymes, and hs-CRP were evaluated at the baseline and end of the trial. Results: Synbiotic supplementation significantly reduces fasting blood glucose (FBG) levels in the intervention group versus placebo group [-14.69 ± 15.11 mg/dl vs. -8.23 ± 7.90 mg/dl; p=0.007], but there was no difference between groups in other metabolic factors. Conclusions: These findings suggest that synbiotic supplementation while following a healthy lifestyle and nutrition improved FBG in patients with metabolic syndrome.

The concentration and prevalence of potentially toxic elements (PTEs) in cheese: a global systematic review and meta-analysis.

The present study aimed to systematically review the concentration of different PTEs, including Arsenic (As), Mercury (Hg), Lead (Pb), and Cadmium (Cd) in cheese among some databases between 2000 and 2021 (from 57 included studies). Estimated concentrations of 160.78 (95% CI = 119.24-202.28), 15.68 (95% CI = 11.88-19.48), 16.94 (95% CI = 13.29-20.59), and 2.47 (95% CI = 1.70-3.23) µg/kg were calculated for As, Pb, Cd, and Hg, respectively. Most of the studies for PTEs are related to Pb, about 40% of the studies, compared to As, which has fewer studies. The results showed that As and Hg concentrations were lower than the Codex Alimentarius Commission standard limits. Nevertheless, Cd and Pb concentrations were higher than the standard limit values. Results showed that cheese making, the ripening period, fat content, and texture are influential factors in a high level of Pb and Cd in cheese samples.

Analysis of non-pharmaceutical interventions impacts on COVID-19 pandemic in Iran.

The COVID-19 pandemic shows to have a huge impact on people's health and countries' infrastructures around the globe. Iran was one of the first countries that experienced the vast prevalence of the coronavirus outbreak. The Iranian authorities applied various non-pharmaceutical interventions to eradicate the epidemic in different periods. This study aims to investigate the effectiveness of non-pharmaceutical interventions in managing the current Coronavirus pandemic and to predict the next wave of infection in Iran. To achieve the research objective, the number of cases and deaths before and after the interventions was studied and the effective reproduction number of the infection was analyzed under various scenarios. The SEIR generic model was applied to capture the dynamic of the pandemic in Iran. To capture the effects of different interventions, the corresponding reproduction number was considered. Depending on how people are responsive to interventions, the effectiveness of each intervention has been investigated. Results show that the maximum number of the total of infected individuals will occur around the end of May and the start of June 2021. It is concluded that the outbreak could be smoothed if full lockdown and strict quarantine continue. The proposed modeling could be used as an assessment tool to evaluate the effects of different interventions in new outbreaks.

Simultaneous Nanolocal Polymer and In Situ Readout Unit Placement in Mesoporous Separation Layers.

Bioinspired solid-state nanopores and nanochannels have attracted interest in the last two decades, as they are envisioned to advance future sensing, energy conversion, and separation concepts. Although much effort has been made regarding functionalization of these materials, multifunctionality and accurate positioning of functionalities with nanoscale precision still remain challenging. However, this precision is necessary to meet transport performance and complexity of natural pores in living systems, which are often based on nonequilibrium states and compartmentalization. In this work, a nanolocal functionalization and simultaneous localized sensing strategy inside a filtering mesoporous film using precisely placed plasmonic metal nanoparticles inside mesoporous films with pore accessibility control is demonstrated. A single layer of gold nanoparticles is incorporated into mesoporous thin films with precise spatial control along the nanoscale layer thickness. The local surface plasmon resonance is applied to induce a photopolymerization leading to a nanoscopic polymer shell around the particles and thus nanolocal polymer placement inside the mesoporous material. As near-field modes are sensitive to the dielectric properties of their surrounding, the in situ sensing capability is demonstrated using UV-vis spectroscopy. It is demonstrated that the sensing sensitivity only slightly decreases upon functionalization. The presented nanolocal placement of responsive functional polymers into nanopores offers a simultaneous filtering and nanoscopic readout function. Such a nanoscale local control is envisioned to have a strong impact onto the development of new transport and sensor concepts, especially as the system can be developed into higher complexity using different metal nanoparticles and additional design of mesoporous film filtering properties.

Further Step toward a Comprehensive Understanding of the Effect of Surfactant Additions on Altering the Impact Dynamics of Water Droplets.

The addition of surfactants to pure water for specific applications has made controlling the impact dynamics of surfactant-laden droplets a complex phenomenon. This work investigates the influence of the molecular weight (MW), concentration, and ionic nature of the surfactants as well as the substrate surface characteristics on the impact dynamics of surfactant-laden droplets using a high-speed camera at 10 000 frames per second. Sodium dodecyl sulfate, hexadecyltrimethylammonium bromide, and n-decanoyl-n-methylglucamine were used as anionic, cationic, and nonionic surfactants, respectively. We used hydrophilic glass slides, hydrophobic polytetrafluoroethylene, and superhydrophobic alkyl ketene dimer (AKD) as substrates. The results show that the efficiency of the surfactant addition in increasing the maximum spreading diameter is significantly influenced by the molecular weight and ionic nature of the solutions as well as the nonwettability of the substrate. Among all of the surfaces examined, the concentration and ionic nature of the solutions were found to be more dominant parameters in determining the energy dissipation in the retraction phase of the droplet impact on the superhydrophobic AKD surfaces. As the concentration decreases or positive charges are present in the solution, it is more likely to observe a similar retraction dynamic to pure water when the droplet hits the superhydrophobic AKD having negatively charged surface sites. Finally, in terms of the impact outcomes of the surfactant-laden droplets on the superhydrophobic AKD, it is shown that the influence of the surfactant addition is more noticeable at lower Weber numbers, where the droplet tries to rebound by overcoming the energy loss that occurred in the spreading.

Impact Dynamics and Freezing Behavior of Surfactant-Laden Droplets on Non-Wettable Coatings at Subzero Temperatures.

The present study investigates the impact and freezing behavior of the droplets of surfactant solutions on non-wettable coatings at very low temperatures of -10 to -30 °C. Our goal is to elucidate the critical role of concentration, molecular weight, and ionic nature of surfactants on these phenomena. To achieve this goal, we used sodium dodecyl sulfate (anionic), hexadecyltrimethylammonium bromide (cationic), and n-decanoyl-n-methylglucamine (nonionic) at four concentrations ranging from 0 to 2 × CMC (critical micelle concentration). We captured the impact-freezing of the droplets on superhydrophobic alkyl ketene dimer coatings using a high-speed camera at 5000 frames per second. The results show that the ability of the droplets to spread and retract on the coatings is a function of concentration, ionic nature, and molecular weight of the surfactants, as well as the temperature-dependent viscosity of the solutions. Additionally, surfactant-laden droplets generally demonstrated an accelerated freezing compared to pure water. This might be due to the fact that the presence of surfactants can promote both heterogeneous ice nucleation from within the liquid and a larger solid-liquid interfacial area by filling the air pockets of the surface, leading to enhanced heat transfer. The behavior of the cationic surfactant at certain concentrations was, however, an exception leading to a freezing delay, for which a mechanism will be proposed.

Spectrum of lymphoma subtypes based on the latest World Health Organization classification in southern Iran from 2000 to 2011.

Background: Lymphoma, both Hodgkin and non-Hodgkin, is one of the most common malignancies, with a distinct subtype distribution throughout the world. Methods: A total of 453 lymphoma cases, identified retrospectively from January 2000 to October 2011, were studied to identify the subtype distribution of lymphoma in our center, located in southern Iran, according to the latest WHO classification. Results: The most common sites of involvement of all lymphomas were extranodal (59.16%). The highest frequency of extranodal sites in all lymphoid neoplasms were associated with diffuse large B-cell lymphoma (22.95%) and classical Hodgkin lymphoma (10.15%). Of 453 cases, 23 (5.32%) were T and natural killer cell neoplasms, of which the most common subtypes were T-cell large granular lymphocytic leukemia and anaplastic large cell lymphoma. Conclusion: This study indicated that the subtype distribution of lymphoma (except for the higher prevalence of diffuse large B-cell lymphoma, chronic lymphocytic leukemia/small lymphocytic lymphoma and lower rate of follicular lymphoma) in this part of Iran is similar to that in the Middle Eastern countries. Mature B-cell neoplasms are less frequent compared with both western and far east Asian countries.

Synthesis of chitosan-grafted poly-acrylic acid (CTS-g-PAA) hydrogel and its potential application in biosensors for signal enhancing and bioanalysis.

Nowadays, hydrogels have been attracted a lot of interest due to their immense potential in different fields such as biomedicine and biotechnology. Biodegradable and biocompatible pH-sensitive chitosan-grafted polyacrylic acid (CTS-g-PAA) hydrogel was synthesized by grafting an acrylic acid monomer onto chitosan at the presence of methylene bisacrylamide as a cross-linking agent and ammonium persulphate as an initiator. FT-IR spectroscopy and scanning electron microscopy (SEM) were used to analyze the properties of the obtained hydrogel. The synthesized hydrogel is suitable for the delivery of many hydrophilic drugs or species. Using a multi-walled carbon nanotube modified-glassy carbon electrode (CNT-GCE), the loading and release conditions of Nile Blue (NB) as an electroactive compound were evaluated utilizing the differential pulse voltammetry (DPV) and cyclic voltammetry (CV). The effect of various parameters on the electrochemical signal of NB was investigated, and the optimal conditions for the efficient performance of hydrogel to delivery of NB were obtained. The electrocatalytic current values show linear dependence to NB concentration in the range of 0.098 - 0.971 µM while the detection limit of this electrochemical platform was 12.3 nM. The unique proposed hydrogel with the electroactive NB has a broad range of possible applications in biosensors for signal enhancement and bioanalysis. Supplementary Information: The online version contains supplementary material available at 10.1007/s10854-021-06939-7.

Wetting-Controlled Localized Placement of Surface Functionalities within Nanopores.

In the context of sensing and transport control, nanopores play an essential role. Designing multifunctional nanopores and placing multiple surface functionalities with nanoscale precision remains challenging. Interface effects together with a combination of different materials are used to obtain local multifunctionalization of nanoscale pores within a model pore system prepared by colloidal templating. Silica inverse colloidal monolayers are first functionalized with a gold layer to create a hybrid porous architecture with two distinct gold nanostructures on the top surface as well as at the pore bottom. Using orthogonal silane- and thiol-based chemistry together with a control of the wetting state allows individual addressing of the different locations within each pore resulting in nanoscale localized functional placement of three different functional units. Ring-opening metathesis polymerization is used for inner silica-pore wall functionalization. The hydrophobized pores create a Cassie-Baxter wetting state with aqueous solutions of thiols, which enables an exclusive functionalization of the outer gold structures. In a third step, an ethanolic solution able to wet the pores is used to self-assemble a thiol-containing initiator at the pore bottom. Subsequent controlled radical polymerization provides functionalization of the pore bottom. It is demonstrated that the combination of orthogonal surface chemistry and controlled wetting states can be used for the localized functionalization of porous materials.

Surface-Plasmon- and Green-Light-Induced Polymerization in Mesoporous Thin Silica Films.

The near-field of surface plasmon resonances at planar metal surfaces is confined to the nanoscale, but its resonance wavelength is located in the visible light range, making it interesting for confining polymer functionalization of surfaces but incompatible with the majority of polymerization reactions. Here, fluorescein as a polymerization initiator allowing dye-sensitized polymerization with green light (438-540 nm) is demonstrated to allow polymer functionalization of mesoporous films deposited onto planar silver metal layers. The fluorescein-induced polymer functionalization of mesoporous silica films is investigated with respect to the influence of irradiation power and irradiation time and its potential to generate polymer gradients. Finally, the polymer functionalization of mesoporous films upon surface-plasmon-initiated polymerization is demonstrated. Polymer functionalization thereby determines pH-responsive ionic mesopore accessibility. Consequently, these results present a sound basis for further nanoscale near-field-induced polymer functionalization of porous films.

Association of Exon 14 of the SOX6 Gene Sequence Variations with Response to Hydroxyurea Therapy in Patients Carrying Non Transfusion-Dependent Thalassemia.

Hydroxyurea (HU) activates the γ-globin gene, resulting in increased Hb F synthesis. The SOX6 gene is a member of the Sox (Sry-type HMG box) family of transcription factors, characterized by minor groove binding domain. The DNA binding domain of this gene is encoded by exon 14. We assessed the relationship between response to HU and exon 14 of the SOX6 gene sequence variations in patients with non transfusion-dependent thalassemia (NTDT). One hundred NTDT patients from southern Iran underwent HU therapy randomly participated in this cross-sectional study between February 2013 and October 2014. Based on response to HU therapy, the patients were divided into two groups: good and poor responder. Sequence variations of exon 14 of the SOX6 gene was assayed by the Sanger sequencing technique. From all evaluated single nucleotide polymorphisms (SNPs) as above, we found no significant association between sequence variations of exon 14 of the SOX6 gene and response to HU therapy (p > 0.05). It seems that no SNPs in exon 14 of the SOX6 gene is associated with response to HU in NTDT patients, but more studies are needed for further evaluation.

The common road safety approaches: A scoping review and thematic analysis.

PURPOSE: Comparison of effective road safety approaches with those of relatively similar countries can be used to identify possibilities for safety improvement. Since there is no clear and comprehensive study of countries' current and successful approaches to road safety in the world, the aim of this study was to identifying common road safety approaches in the world. METHODS: This study was performed using scoping review and thematic analysis. The study followed the approach proposed by Arksey and O'Malley. In this study all articles were selected without time limit by searching in the following databases: Web of Science, PubMed, Scopus, ProQuest, and Embase. An initial search of 5612 papers was found and finally, 20 papers met the inclusion criteria and were analyzed. RESULTS: There were different road safety approaches in different countries around the world, which were classified in three themes: traditional approach, systemic approach, and vision zero. The traditional approach includes the sub-theme of the road-user approach, and the causal approach. The systemic approach also includes sub-themes of sustainable safety, safety system, and the United Nations plan for decade of action. CONCLUSION: A systemic approach to road safety seems to be welcomed by most developed and developing countries, and a paradigm shift towards a safe system has taken place. Also, given the successful results of implementing vision zero in leading countries, most countries are trying to design and implement this approach. Finally, the choice and implementation of road safety approaches varies according to the principles, priorities and infrastructure of each country.

Road safety data collection systems in Iran: A comparison based on relevant organizations.

PURPOSE: Various organizations and institutions are involved in road traffic injury (RTI) and crash registration such as police, forensic medicine organization, hospitals and emergency medical services. But there is a substantial uncertainty in interpreting the data, duplicated data collection and missing data in relation to RTI in most systems. This study aims to identify data sources for RTI surveillance in Iran and to explore traffic safety data source domains, data elements and detailed information by each data source. METHODS: This is a qualitative study which was conducted in 2017 in Iran. Data were collected employing semi-structured interviews with informants in road safety organizations in relation to traffic safety including Police, Ministry of Health and Medical Education as well as Forensic Medicine Organization and other authorities-in-charge. For completing the preliminary extraction information, the minimum data set was used and compared in each system. RESULTS: Eight different organizations relevant to road traffic safety were identified. The main domain of data provided by each one consists of Emergency Medical System form, Police KAM114 form, Ministry of Transport and Road Administration, Red Crescent Organization/Disaster Management Information System, Ministry of Health and Medical Education, Forensic Medicine Organization, Insurance Company and Ministry of Justice. Each system has its own database, based upon its scope and mainly at crash and post-crash status and little on pre-crash circumstance. CONCLUSION: All current registry systems are not surveillance systems for RTI prevention. Huge data have been collected in various registry systems in Iran, but most of the collected variables are duplicated in each system. On the other hand, some variables like alcohol and substance abuse, child seat belt, helmet use in relation to RTI prevention are missed in all systems. Accordingly, it is a critical need to integrate and establish a comprehensive surveillance system, with focus on the goal of each system and collection of minimum data in each organization, which currently is underway.