Ultrafast Sunlight-Induced Polymerization: Unveiling 2-Phenylnaphtho[2,3-d]Thiazole-4,9-dione as a Unique Scaffold for High-Speed and Precision 3D Printing.

A series of 15 dyes based on the 2-phenylnaphtho[2,3-d]thiazole-4,9-dione scaffold and 1 compound based on the 2,3-diphenyl-1,2,3,4-tetrahydrobenzo[g]quinoxaline-5,10-dione scaffold are studied as photoinitiators. These compounds are used in two- and three-component high-performance photoinitiating systems for the free radical polymerization of trimethylolpropane triacrylate (TMPTA) and polyethylene glycol diacrylate (PEGDA) under sunlight. Remarkably, the conversion of TMPTA can reach ≈60% within 20 s, while PEGDA attains a 96% conversion within 90 s. To delve into the intricate chemical mechanisms governing the polymerization, an array of analytical techniques is employed. Specifically, UV-vis absorption and fluorescence spectroscopy, steady-state photolysis, stability experiments, fluorescence quenching experiments, cyclic voltammetry, and electron spin resonance spin trapping (ESR-ST) experiments, collectively contribute to a comprehensive understanding of the photochemical mechanisms. Photoinitiation capacities of these systems are determined using real-time Fourier transformed infrared spectroscopy (RT-FTIR). Of particular interest is the revelation that, owing to the superior initiation ability of these dyes, high-resolution 3D patterns can be manufactured by direct laser write (DLW) technology and 3D printing. This underscores the efficient initiation of free radical polymerization processes by the newly developed dyes under both artificial and natural light sources, presenting an avenue for energy-saving, and environmentally friendly polymerization conditions.

Novel High-Performance Glyoxylate Derivative-Based Photoinitiators for Free Radical Photopolymerization and 3D Printing with Visible LED.

Investigations concerning the glyoxylate moiety as a photocleavable functional group for visible light photoinitiators, particularly in the initiation of free radical photopolymerization remain limited. This study introduces nine innovative carbazole-based ethyl glyoxylate derivatives (CEGs), which are synthesized and found to exhibit excellent photoinitiation abilities as monocomponent photoinitiating systems. Notably, these structures demonstrate robust absorption in the near-UV/visible range, surpassing the commercial photoinitiators. Moreover, the newly developed glyoxylate derivatives show higher acrylate function conversions compared to a benchmark photoinitiator (MBF) in free radical photopolymerization. Elucidation of the photoinitiation mechanism of CEGs is achieved through a comprehensive analysis involving the decarboxylation reaction and electron spin resonance spin trapping. Furthermore, their practical utility is confirmed during direct laser writing and 3D printing processes, enabling the successful fabrication of 3D printed objects. This study introduces pioneering concepts and effective strategies in the molecular design of novel photoinitiators, showcasing their potential for highly advantageous applications in 3D printing.

Low-Migration Compounds with Amine Functionality as Coinitiators of Radical Polymerization.

The utilization of two-component systems comprising camphorquinone (CQ) and aromatic amines has become prevalent in the photopolymerization. However, there are still concerns about the safety of this CQ/amine system, mainly because of the toxicity associated with the leaching of aromatic amines. In light of these concerns, this study aims to develop novel coinitiator combinations featuring CQ and amines which cannot be leached out of materials, enabling free radical polymerization of representative dentalmethacrylate resins under blue light irradiation. This approach involves the initial design and analysis of hydrogen donors with low C─H bond dissociation energy through molecular modeling. Subsequently, copolymerizable methacrylate functional groups are incorporated via chemical modification, allowing it to act as both coinitiator and copolymerization monomer to achieve low migrationand leachability properties. This work presents, for the first time, the synthesis of the innovative coinitiator and compares its performance with the benchmark CQ/ethyl-4-dimethylaminobenzoate (EDB)-based photoinitiation system (PIS). The results demonstrate the effectiveness of the newly proposed PIS. Finally, an in-depth investigation is conducted into the reaction mechanism associated with this PIS through molecular orbital calculations and electron spin resonance studies.

High Photoinitiating Efficiency of Benzothioxanthene-based Oxime Esters in Photopolymerization via Photocleavage and/or Single Electron Transfer under Visible Light and Sunlight.

In this work, six benzothioxanthene-based oxime esters were employed as photoinitiators for photopolymerization with visible light (LED) and sunlight. Their abilities to behave as Type I photoinitiators by mean of a photocleavage mechanism of oxime esters but also in multicomponent photoinitiating system with an iodonium salt (through an electron transfer mechanism) were both explored with the different structures. Due to their broad absorption spectra tailing up 600 nm, photoinitiating properties of the benzothioxanthene-based oxime esters were systematically tested under excitation with low-intensity LED light at wavelengths of 405 nm and 450 nm. Additionally, to the polymerization tests done under artificial light, different benzothioxanthene-based oxime esters were also investigated as solar photoinitiators and displayed a high reactivity in France (Western Europe) even in winter conditions. For the best candidates i.e. the most reactive structures, direct laser write experiments were carried out, evidencing the interest of these structures.

Photochemical Synthesis of Noble Metal Nanoparticles: Influence of Metal Salt Concentration on Size and Distribution.

This paper explores the photochemical synthesis of noble metal nanoparticles, specifically gold (Au) and silver (Ag) nanoparticles, using a one-component photoinitiator system. The synthesis process involves visible light irradiation at a wavelength of 419 nm and an intensity of 250 mW/cm2. The radical-generating capabilities of the photoinitiators were evaluated using electron spin resonance (ESR) spectroscopy. The main objective of this study was to investigate how the concentration of metal salts influences the size and distribution of the nanoparticles. Proposed mechanisms for the photochemical formation of nanoparticles through photoinitiated radicals were validated using cyclic voltammetry. The results showed that the concentration of AgNO3 significantly impacted the size of silver nanoparticles, with diameters ranging from 1 to 5 nm at 1 wt% and 3 wt% concentrations, while increasing the concentration to 5 wt% led to an increase in the diameter of silver nanoparticles to 16 nm. When HAuCl4 was used instead of AgNO3, it was found that the average diameters of gold nanoparticles synthesized using both photoinitiators at different concentrations ranged between 1 and 4 nm. The findings suggest that variations in HAuCl4 concentration have minimal impact on the size of gold nanoparticles. The photoproduction of AuNPs was shown to be thermodynamically favorable, with the reduction of HAuCl4 to Au0 having ∆G values of approximately -3.51 and -2.96 eV for photoinitiators A and B, respectively. Furthermore, the photoreduction of Ag+1 to Ag0 was demonstrated to be thermodynamically feasible, with ∆G values of approximately -3.459 and -2.91 eV for photoinitiators A and B, respectively, confirming the effectiveness of the new photoinitiators on the production of nanoparticles. The synthesis of nanoparticles was monitored using UV-vis absorption spectroscopy, and their sizes were determined through particle size analysis of transmission electron microscopy (TEM) images.

Charge Transfer Complexes (CTCs) with Pyridinium Salts: Toward Efficient Dual Photochemical/Thermal Initiators and 3D Printing Applications.

In both organic and polymer synthesis, photochemistry of charge transfer complexes (CTCs) is considered as a powerful approach to expand visible-light-driven radical chemistry reaction. One reports herein on the development of a class of useful CTCs using pyridinium salts as efficient electron acceptors (combined with N, N, 3,5-tetramethylaniline, TMA) to achieve a multiwavelength (375-560 nm) metal-free LED photopolymerization process under mild conditions (open to air, without monomer purification and inhibitor removal). The UV-vis absorption spectra and molecular modeling simultaneously verify its potential blue-green absorbing wavelength range. Also, their good thermal initiation behavior at relatively low temperatures makes it easier to achieve thick samples and/or polymerization in the shadow region in practice. More importantly, with excellent photoinitiating capability, the formulation is successfully applied to direct laser write (DLW) and high-resolution 3D printing, yielding a series of objects with well-defined structures, such as letters, ring, solid squares, and chess pieces. These new pyridinium salt acceptors further extend the applicability to visible photopolymerizable resins and additive-containing formulations for efficient surface and deep curing.

Development of a Borane-(Meth)acrylate Photo-Click Reaction.

In the development of 3D printing fuels, there is a need for new photoinitiating systems working under mild conditions and/or leading to polymers with new and/or enhanced properties. In this context, we introduce herein N-heterocyclic carbene-borane complexes as reagents for a new type of photo-click reaction, the borane-(meth)acrylate click reaction. Remarkably, the higher bond number of boranes relative to thiols induced an increase of the network density associated with faster polymerization kinetics. Solid-state NMR evidenced the strong participation of the boron centers on the network properties, while DMA and AFM showed that the materials exhibit improved mechanical properties, as well as reduced solvent swelling.

Two-Photon Initiating Efficiency of a Ditopic Alkoxynitrostilbene Reacting through a Self-Regenerative Mechanism.

The photophysical properties and the photoinitiating reactivity of a ditopic alkoxynitrostilbene were compared to those of its single branch chromophore used as a reference. Whereas a trivial additive effect is observed when considering the one- and two-photon absorption properties, a clear and very significant amplification has been highlighted for the photoreactivity of this free radical photoinitiator which was used as a hydrogen abstractor in presence of an aliphatic amine co-reactant. We indeed demonstrate that the proximity of two nitroaromatics moieties within the same molecular architecture gives rise to an original cycling mechanism based on a stepwise photo triggering of each photoredox center followed by a subsequent regenerative process. The combination of a high two-photon absorption cross-section (δ780nm ≈330 GM) with a strong enhancement in photoreactivity makes this nitrostilbene bichromophore a very suitable candidate for two-photon polymerization applications.

Polymeric Iodonium Salts to Trigger Free Radical Photopolymerization.

In a significant breakthrough from classical molecular (i.e., nonpolymeric) iodonium salts in light-induced photochemistry, the synthesis and use of new safer polymeric iodonium salts are reported here. They are shown to be involved in charge transfer complexes (CTCs) while in interaction with a safe amino acid derivative (N-phenylglycine). Also, this study demonstrates i) the formation of CTCs between the iodonium (acceptor) and an aryl/alkyl amine (donor) through UV-vis measurements of the monomer, ii) the formation of radicals in electron spin resonance spin trapping experiments when the CTCs are irradiated by visible light (405 nm), and iii) their efficiency as a photoinitiator to polymerize three different acrylic monomers under LED irradiation at 405 nm under air and their application to 3D resolved laser writing of thick samples (3 mm). High reactivity for polymeric iodonium salts comparable with molecular ones is exhibited with the advantage of potential lower migration. To the best of the authors' knowledge, this is the first reported instance of polymeric iodonium salts acting as polymerization initiators.

New Phosphine Oxides as High Performance Near- UV Type I Photoinitiators of Radical Polymerization.

Carbazole structures are of high interest in photopolymerization due to their enhanced light absorption properties in the near-UV or even visible ranges. Therefore, type I photoinitiators combining the carbazole chromophore to the well-established phosphine-oxides were proposed and studied in this article. The aim of this article was to propose type I photoinitiators that can be more reactive than benchmark phosphine oxides, which are among the more reactive type I photoinitiators for a UV or near-UV light emitting diodes (LED) irradiation. Two molecules were synthesized and their UV-visible light absorption properties as well as the quantum yields of photolysis and photopolymerization performances were measured. Remarkably, the associated absorption was enhanced in the 350-410 nm range compared to benchmark phosphine oxides, and one compound was found to be more reactive in photopolymerization than the commercial photoinitiator TPO-L for an irradiation at 395 nm.

Mixture of Azolium Tetraphenylborate with Isopropylthioxanthone: A New Class of N-Heterocyclic Carbene (NHC) Photogenerator for Polyurethane, Polyester, and ROMP Polymers Synthesis.

In the search of smarter routes to control the conditions of N-heterocyclic carbene (NHCs) formation, a two-component air-stable NHC photogenerating system is reported. It relies on the irradiation at 365 nm of a mixture of 2-isopropylthioxanthone (ITX) with 1,3-bis(mesityl)imidazoli(ni)um tetraphenylborate. The photoinduced liberation of NHC is evidenced by reaction with a mesitoyl radical to form an NHC-radical adduct detectable by electron spin resonance spectroscopy. The NHC yield can be determined by 1 H NMR spectroscopy through the formation of a soluble and stable NHC-carbodiimide adduct. To deprotonate the azolium salt and liberate the NHC, a mechanism is proposed in which the role of base is played by ITX radical anion formed in situ by a primary photoinduced electron-transfer reaction between electronically excited ITX (oxidant) and BPh4 - (reductant). An NHC yield as high as 70 % is achieved upon starting with a stoichiometric ratio of ITX and azolium salt. Three different photoNHC-mediated polymerizations are described: synthesis of polyurethane and polyester by organocatalyzed step-growth polymerization and ring-opening copolymerization, respectively, and generation of polynorbornene by ring-opening metathesis polymerization using an NHC-coordinated Ru catalyst formed in situ.

Photoinitiation Mechanism and Ability of Monoamino-Substituted Anthraquinone Derivatives as Cationic Photoinitiators of Polymerization under LEDs.

The design and development of photoinitiating systems applicable to UV or even visible light delivered from light-emitting diodes (LEDs) has been attracting increasing attention due to their great potential applications in various fields. Compared to the strategy of synthesizing novel compounds, the exploration of existing chemicals with interesting photochemical/photophysical properties for their usage as photoinitiators is more appealing and easily commercialized. Nevertheless, a number of compounds such as monoamino-substituted anthraquinone derivatives, which are intensively investigated for their photophysical and photochemical properties, have seldom been studied for their roles as photoinitiators under LED irradiation. Herein, three monoamino-substituted anthraquinone derivatives, that is, 1-aminoanthraquinone, 1-(methylamino)anthraquinone and 1-(benzamido)anthraquinone, are studied for their potential as photoinitiators. The photoinitiation mechanism of these monoamino-substituted anthraquinone derivatives, when combined with iodonium salt, is first clarified using computational quantum chemistry, fluorescence, steady-state photolysis, and electron spin resonance spin-trapping techniques. Then, their photoinitiation ability for the cationic photopolymerization of epoxide and divinyl ether monomers is also investigated.

Photoreduction of triplet thioxanthone derivative by azolium tetraphenylborate: a way to photogenerate N-heterocyclic carbenes.

Although N-heterocyclic carbenes (NHCs) have brought profound changes in catalytic organic synthesis, their generation generally requires an inert atmosphere and harsh conditions. To overcome these limitations, an air-stable NHC photogenerator has been developed involving two mild components: 1,3-bis(mesityl)imidazolium tetraphenylborate (IMesH+BPh4-) and electronically excited isopropylthioxanthone (ITX). In this study, the photochemical mechanism is investigated via the accurate identification of the transient species and photoproducts. Electron transfer reaction between the excited triplet state of ITX and BPh4- is demonstrated as being the primary photochemical step. Nanosecond laser spectroscopy shows an efficient quenching and the formation of the expected ITX radical anion. The oxidized borane species is not observed, suggesting that this short-lived species could dissociate very rapidly to give the phenyl radical - successfully identified using electron paramagnetic resonance - and triphenylborane. As regards the final photoproducts, 1H and 13C NMR spectroscopies support the formation of the targeted NHC, 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (IMes), suggesting the occurrence of a subsequent proton transfer reaction between ITX radical anion and imidazolium cation (IMesH+). Gas chromatography-mass spectrometry reveals three other products: biphenyl, isopropylthioxanthene and ITX. Their formation can be reconciled with a 2-step mechanism of photoinduced electron/proton transfer reactions. 11B NMR spectroscopy demonstrates that the main organoboron photoproduct is diphenylborinic acid formed by oxidation of BPh3. Due to its Lewis acidity, Ph2BOH can react with IMes to yield an NHC-boron adduct.

Light-Sensitive Alkoxyamines as Versatile Spatially- and Temporally- Controlled Precursors of Alkyl Radicals and Nitroxides.

The use of UV/visible light irradiation as a means to initiate organic syntheses is increasingly attractive due to the high spatial and temporal control conferred by photochemical processes. The aim of this work is thus to demonstrate that alkoxyamines bearing a chromophore on the alkyl moiety can provide a photoprotecting group for the sensitive nitroxide functionality, that is known to degrade through redox processes. The dissociation of various photosensitive alkoxyamines was studied from 223 to 298 K under UV/visible irradiation, depending on the nature of the chromophore. In each case a rapid (typically in less than 1 h) and near-quantitative dissociation was observed. As an illustration of the interest of this approach, a pyrene-based alkoxyamine was employed for the spatially controlled coupling of polymer chains onto Si wafers to produce micropatterned surfaces.

Visible-Light Emulsion Photopolymerization of Styrene.

The photopolymerization of styrene in emulsion is achieved in a conventional double-wall reactor equipped with a LED ribbon coiled around the external glass wall. Styrene mixed to acridine orange is added to the water phase containing sodium dodecyl sulfate, a water-soluble N-heterocyclic carbene-borane and disulfide, and irradiated. Highly stable latexes are obtained, with particles up to a diameter of 300 nm. The ability to reach such large particle sizes via a photochemical process in a dispersed medium is due to the use of visible light: the photons in the visible range are less scattered by larger objects and thus penetrate and initiate better the polymerizations. They are also greener and cheaper to produce via LEDs, and much safer than UVs. The method presented does not require any specific glassware; it works at lower temperature and delivers larger particles compared to thermal processes at similar solids contents and surfactant concentrations.

How Do Phosphinates React with Unactivated Alkenes Under Organic Photocatalyzed Conditions? Substrate Scope and Mechanistic Insights.

The first visible-light-mediated, metal-free hydrophosphinylation of unactivated alkenes with ethyl and butyl phosphinates is described. The reaction works with a low catalyst loading of 9-mesityl-10-methylacridinium perchlorate (Fukuzumi photocatalyst, 0.5 mol %) in the presence of diphenyliodonium triflate as oxidant. The reaction proceeds smoothly and covers a broad scope of substrates. Detailed mechanistic investigations, including EPR spectroscopy, fluorescence and steady-state photolysis, allowed the mechanism of this photoreaction to be rationalized.

A 19th Century "Ideal" Oil Paint Medium: A Complex Hybrid Organic-Inorganic Gel.

British 19th century painters such as J. M. W. Turner, commonly modified the properties of their paint by using gels called "gumtions". These gels allowed them to easily tune the paint handling and drying properties. The fascinating properties of these "gumtions" were obtained by adding lead acetate to a ternary system based on mastic resin, linseed oil and turpentine. Herein, we report and investigate in depth the rheological properties of these gels as well as their structure at a molecular and supra-molecular scale.

Metal-Free, Visible Light-Photocatalyzed Synthesis of Benzo[b]phosphole Oxides: Synthetic and Mechanistic Investigations.

Highly functionalized benzo[b]phosphole oxides were synthesized from reactions of arylphosphine oxides with alkynes under photocatalytic conditions by using eosin Y as the catalyst and N-ethoxy-2-methylpyridinium tetrafluoroborate as the oxidant. The reaction works under mild conditions and has a broad substrate scope. Mechanistic investigations have been undertaken and revealed the formation of a ground state electron donor-acceptor complex (EDA) between eosin (the photocatalyst) and the pyridinium salt (the oxidation agent). This complex, which has been fully characterized both in the solid state and in solution, turned out to exhibit a dual role, i.e., the oxidation of the photocatalyst and the formation of the initiating radicals, which undergoes an intramolecular reaction avoiding the classical diffusion between the two reactants. The involvement of ethoxy and phosphinoyl radicals in the photoreaction has unequivocally been evidenced by EPR spectroscopy.

Fluorescent Brighteners as Visible LED-Light Sensitive Photoinitiators for Free Radical Photopolymerizations.

The photochemical and electrochemical investigations of commercially available, safe, and cheap fluorescent brighteners, namely, triazinylstilbene (commercial name: fluorescent brightener 28) and 2,5-bis(5-tert-butyl-benzoxazol-2-yl)thiophene, as well as their original use as photoinitiators of polymerization upon light emitting diode (LED) irradiation are reported. Remarkably, their excellent near-UV-visible absorption properties combined with outstanding fluorescent properties allow them to act as high-performance photoinitiators when used in combination with diaryliodonium salt. These two-component photoinitiating systems can be employed for free radical polymerizations of acrylate. In addition, this brightener-initiated photopolymerization is able to overcome oxygen inhibition even upon irradiation with low LED light intensity. The underlying photochemical mechanisms are investigated by electron-spin resonance-spin trapping, fluorescence, cyclic voltammetry, and steady-state photolysis techniques.

Influence of Electronic Effects on the Reactivity of Triazolylidene-Boryl Radicals: Consequences for the use of N-Heterocyclic Carbene Boranes in Organic and Polymer Synthesis.

A small library of triazolylidene-boranes that differ only in the nature of the aryl group on the external nitrogen atom was prepared. Their reactivity as hydrogen-atom donors, as well as that of the corresponding N-heterocyclic carbene (NHC)-boryl radicals toward methyl acrylate and oxygen, was investigated by laser flash photolysis, molecular orbital calculations, and ESR spin-trapping experiments, and benchmarked relative to the already known dimethyltriazolylidene-borane. The new NHC-boranes were also used as co-initiators for the Type I photopolymerization of acrylates. This allowed a structure-reactivity relationship with regard to the substitution pattern of the NHC to be established and the role of electronic effects in the reactivity of NHC-boryl radicals to be probed. Although their rate of addition to methyl acrylate depends on their electronegativity, the radicals are all nucleophilic and good initiators for photopolymerization reactions.