High efficiency of biosurfactants in stabilizing oil micro-droplets within the aging time scale of milliseconds: a microfluidic study.

Rapid adsorption of surfactants onto a freshly formed interface is vital for emulsification because emulsification is a competitive process occurring between the very short time span of interface formation and surfactant mass transport. The biosurfactant surfactin has been previously reported to reach adsorption equilibrium at the hydrophobic/hydrophilic interface within hundreds of milliseconds and rapidly reduce the interfacial tension compared to chemically synthesized surfactants. According to a prior study, surfactin is expected to exhibit good performance in stabilizing micro-droplets of oil within the aging time scale of milliseconds. Herein, the stabilities of micro-droplets of n-hexadecane in the presence of a biosurfactant, surfactin (C15-SFT), and a chemically synthesized surfactant, sodium cetyl benzene sulfonate (8-SCBS), were investigated using a microfluidic method. The coalescence frequency of micro-droplets, the evolution of micro-droplet size, and the coalescence time of micro-droplets were evaluated. The results indicated that C15-SFT exhibited superiority over 8-SCBS in stabilizing the micro-droplets of n-hexadecane. Biosurfactant C15-SFT effectively reduced the fusion probability between oil droplets and elongated the coalescence time compared to 8-SCBS, and these phenomena were obvious at a shorter aging time (150 ms) and lower surfactant concentration (0.1 × critical micelle concentration). The stabilities of micro-droplets increased with aging time and the bulk concentration of surfactants. Stable micro-droplets of n-hexadecane were formed in 1 × 10-4 mol L-1 C15-SFT solution at 600 ms aging time, and the bulk concentration was 1 × 10-3 mol L-1 in the case of 8-SCBS. The micro-droplets rarely coalesced in the presence of 1 × 10-4 mol L-1 C15-SFT after 600 ms aging time, but the micro-droplets in 1 × 10-4 mol L-1 8-SCBS coalesced frequently in the midstream and downstream of the coalescence chamber, and big droplets were dominant in the emulsion. The coalescence time of micro-droplets stabilized by C15-SFT was obviously longer than that of those stabilized by 8-SCBS under the same condition, indicating that the interfacial film formed by C15-SFT has much strength to resist coalescence during collisions. This work is helpful for understanding the activity of lipopeptides in the very short early stage of the emulsification process, laying the foundation for biosurfactant research in the fields of enhanced oil recovery, bioremediation of contaminated water or soil, etc.

Quantitative determination of rhamnolipid using HPLC-UV through carboxyl labeling.

Rhamnolipid, as a low-toxic, biodegradable and environmentally friendly biosurfactant, has broad application prospects in many industries. However, the quantitative determination of rhamnolipid is still a challenging task. Here, a new sensitive method for the quantitative analysis of rhamnolipid based on a simple derivatization reaction was developed. In this study, 3-[3'-(l-rhamnopyranosyloxy) decanoyloxy] decanoic acid (Rha-C10-C10) and 3-[3'-(2'-O-α-l-rhamnopyranosyloxy) decanoyloxy] decanoic acid (Rha-Rha-C10-C10) were utilized as the representative rhamnolipids. Liquid chromatography-mass spectrometry and high-performance liquid chromatography-ultra violet results showed that these two compounds were successfully labeled with 1 N1-(4-nitrophenyl)-1,2-ethylenediamine. There was an excellent linear relationship between rhamnolipid concentration and peak area of labeled rhamnolipid. The detection limits of the Rha-C10-C10 and Rha-Rha-C10-C10 were 0.018 mg/L (36 nmol/L) and 0.014 mg/L (22 nmol/L), respectively. The established amidation method was suitable for the accurate analysis of rhamnolipids in the biotechnological process. The method had good reproducibility with the relative standard deviation of 0.96% and 0.79%, respectively, and sufficient accuracy with a recovery of 96%-100%. This method was applied to quantitative analysis of 10 rhamnolipid homologs metabolized by Pseudomonas aeruginosa LJ-8. The single labeling method was used for the quantitative analysis of multiple components, which provided an effective method for the quality evaluation of other glycolipids with carboxyl groups.

Genetic engineering of the branched-chain fatty acid biosynthesis pathway to enhance surfactin production from Bacillus subtilis.

Surfactin, which is composed of a ß-hydroxy fatty acid chain and a peptide ring, has drawn considerable attention due to its potential applications in the biomedicine, bioremediation, and petroleum industries. However, the low yield of surfactin from wild strains still restricts its industrial applications. In this study, eight genes relevant to the fatty acid biosynthesis pathway were targeted to enhance surfactin production, and high surfactin-yielding strains with potential industrial applications were obtained. When ldeHA and acc were co-overexpressed, the surfactin yield of recombinant strains TDS8 and TPS8 increased to 1.55- and 1.19-fold of their parental strains, respectively, again proving that the conversion of acetyl-coenzyme A (CoA) to malonyl-CoA is the rate-limiting step in fatty acid biosynthesis. Furthermore, changes in surfactin isoforms of recombinant strain TPS8 suggest that the fatty acid precursor synthesis pathway can be modified to improve the proportion of different isoforms. In addition, the deletion of lpdV, which is responsible for the conversion of α-ketoacyl-CoA precursors, resulted in a sharp decrease in surfactin production, further demonstrating the importance of branched-chain fatty acid biosynthesis in surfactin production. This work will facilitate the design and construction of more efficiently engineered strains for surfactin production and further extend industrial applications.

Discovery of the non-cosmopolitan lineages in Candidatus Thermoprofundales.

The recently proposed order Candidatus Thermoprofundales, currently containing only one family-level lineage Marine Benthic Group-D (MBG-D), is distributed in global subsurface ecosystems and ecologically important, but its diversity, evolution and metabolism remain largely unknown. Here we described two novel family-level specialized lineages in Ca. Thermoprofundales, JdFR-43 and HyVt, which are restricted to specific biotopes (primarily in marine hydrothermal vents and occasionally in oil reservoirs and hot springs) in contrast to the cosmopolitan lineage MBG-D. The comparative genomics revealed that the specialized lineages have streamlined genomes, higher GC contents, enriched genes associated with nucleotide biosynthesis, ribosome biogenesis and DNA repair and additional thermostable aminopeptidases, enabling them to adapt to high-temperature habitats such as marine hydrothermal vents, deep subsurface oil reservoirs and hot springs. On the contrary, the unique metabolic traits of the cosmopolitan MBG-D, motility, glycolysis, butanoate metabolism, secondary metabolites production and additional genes for specific peptides and carbohydrates degradation potentially enhance its response to environmental change. Substrate preference is found for most MAGs across all lineages with the ability to utilize both polysaccharides (chitin and starch) and proteinaceous substances, whereas JdFR-43 members from oil reservoirs can only utilize proteins. These results expand the diversity of Ca. Thermoprofundales significantly and further improve our understandings of the adaptations of Ca. Thermoprofundales to various environments.

Prospects of microbial polysaccharides-based hybrid constructs for biomimicking applications.

Polysaccharides are biobased polymers obtained from renewable sources. They exhibit various interesting features including biocompatibility, biodegradability, and nontoxicity. Microbial polysaccharides are produced by several microorganisms including yeast, fungi, algae, and bacteria. Microbial polysaccharides have gained high importance in biotechnology due to their novel physiochemical characteristics and composition. Among microbial polysaccharides, xanthan, alginate, gellan, and dextran are the most commonly reported polysaccharides for the development of biomimetic materials for biomedical applications including targeted drug delivery, wound healing, and tissue engineering. Several chemical and physical cross-linking reactions are performed to increase their technological and functional properties. Owning to the broad-scale applications of microbial polysaccharides, this review aims to summarize the characteristics with different ways of physical/chemical crosslinking for polysaccharide regulation. Recently, several biopolymers have gained high importance due to their biologically active properties. This will help in the formation of bioactive nutraceuticals and functional foods. This review provides a perspective on microbial polysaccharides, with special emphasis given to applications in promising biosectors and the subsequent advancement on the discovery and development of new polysaccharides for adding new products.

Synthesis and mass spectra of rearrangement bio-signature metabolites of anaerobic alkane degradation via fumarate addition.

Metabolite profiling in anaerobic alkane biodegradation plays an important role in revealing activation mechanisms. Apart from alkylsuccinates, which are considered to be the usual biomarkers via fumarate addition, the downstream metabolites of C-skeleton rearrangement can also be regarded as biomarkers. However, it is difficult to detect intermediate metabolites in both environmental samples and enrichment cultures, resulting in lacking direct evidence to prove the occurrence of fumarate addition pathway. In this work, a synthetic method of rearrangement metabolites was established. Four compounds, namely, propylmalonic acid, 2-(2-methylbutyl)malonic acid, 2-(2-methylpentyl)malonic acid and 2-(2-methyloctyl)malonic acid, were synthesized and determined by four derivatization approaches. Besides, their mass spectra were obtained. Four characteristic ions were observed at m/z 133 + 14n, 160 + 28n, 173 + 28n and [M - (45 + 14n)]+ (n = 0 and 2 for ethyl and n-butyl esters, respectively). For methyl esterification, mass spectral features were m/z 132, 145 and [M - 31]+, while for silylation, fragments were m/z 73, 147, 217, 248, 261 and [M - 15]+. These data provide basis on identification of potential rearrangement metabolites in anaerobic alkane biodegradation via fumarate addition.

Lipid-Stabilized Double Emulsions Generated in Planar Microfluidic Devices.

Microemulsions have found a wide range of applications exploiting their chemical and physical properties. Development of microfluidic-based approaches has allowed for the controlled production of highly monodispersed emulsions, including the formation of multiple and hierarchical emulsions. Conventional poly(dimethylsiloxane)-based microfluidic systems require tight spatial control over the surface chemistry when used for double emulsion generation, which can be challenging to achieve on the micrometer scale. Here, we present a two-dimensional device design, which can selectively be surface-treated in a straightforward manner and allows for the formation of uniform water/oil/water double emulsions by combining two distinct hydrophilic and hydrophobic surface properties. These surfaces are sufficiently separated in space to allow for imparting their functionalization without the requirement for lithographic approaches or complex flow control. We demonstrate that a mismatch between the wettability requirements of the continuous phase and the channel wall inherent in this approach can be tolerated over several hundreds of micrometers, opening up the possibility to use simple pressure-driven flows to achieve surface functionalization. The design architecture exhibits robust efficiency in emulsion generation while retaining simple device fabrication. We finally demonstrate the potential of this approach by generating water in oil in water emulsions with lipid molecules acting as surfactants.

Anaerobic Degradation of Paraffins by Thermophilic Actinobacteria under Methanogenic Conditions.

Microbial anaerobic alkane degradation is a key process in subsurface oil reservoirs and anoxic environments contaminated with petroleum, with a major impact on global carbon cycling. However, the thermophiles capable of water-insoluble paraffins (>C17) degradation under methanogenic conditions has remained understudied. Here, we established thermophilic (55 °C) n-paraffins-degrading (C21-C30) cultures from an oil reservoir. After over 900 days of incubation, the even-numbered n-paraffins were biodegraded to methane. The bacterial communities are dominated by a novel class-level lineage of actinobacteria, 'Candidatus Syntraliphaticia'. These 'Ca. Syntraliphaticia'-like metagenome-assembled genomes (MAGs) encode a complete alkylsuccinate synthases (ASS) gene operon, as well as hydrogenases and formate dehydrogenase, and several enzymes potentially involved in alkyl-CoA oxidation and the Wood-Ljungdahl pathway. Metatranscriptomic analysis suggests that n-paraffins are activated via fumarate addition reaction, and oxidized into carbon dioxide, hydrogen/formate and acetate by 'Ca. Syntraliphaticia', that could be further converted to methane by the abundant hydrogenotrophic and acetoclastic methanogens. We also found a divergent methyl-CoM reductase-like complex (MCR) and a canonical MCR in two MAGs representing 'Ca. Methanosuratus' (within candidate phylum Verstraetearchaeota), indicating the capability of methane and short-chain alkane metabolism in the oil reservoir. Ultimately, this result offers new insights into the degradability and the mechanisms of n-paraffins under methanogenic conditions at high temperatures.

Methanogenic Degradation of Long n-Alkanes Requires Fumarate-Dependent Activation.

Methanogenic degradation of n-alkanes is prevalent in n-alkane-impacted anoxic oil reservoirs and oil-polluted sites. However, little is known about the initial activation mechanism of the substrate, especially n-alkanes with a chain length above C16 Here, a methanogenic C16 to C20n-alkane-degrading enrichment culture was established from production water of a low-temperature oil reservoir. At the end of the incubation (364 days), C16 to C20 (1-methylalkyl)succinates were detected in the n-alkane-amended enrichment culture, suggesting that fumarate addition had occurred in the degradation process. This evidence is supported further by the positive amplification of the assA gene encoding the alpha subunit of alkylsuccinate synthase. A phylogenetic analysis shows these assA amplicons to be affiliated with Smithella and Desulfatibacillum clades. Together with the high abundance of these clades in the bacterial community, these two species are postulated to be the key players in the degradation of C16 to C20n-alkanes in the present study. Our results provide evidence that long n-alkanes are activated via a fumarate addition mechanism under methanogenic conditions.IMPORTANCE Methanogenic hydrocarbon degradation is the major process for oil degradation in subsurface oil reservoirs and is blamed for the formation of heavy oil and oil sands. Addition of n-alkanes to fumarate yielding alkyl-substituted succinates is a well-characterized anaerobic activation mechanism for hydrocarbons and is the most common activation mechanism in the anaerobic biodegradation of n-alkanes with chain lengths less than C16 However, the activation mechanism involved in the methanogenic biodegradation of n-alkanes longer than C16 is still uncertain. In this study, we analyzed a methanogenic enrichment culture amended with a mixture of C16 to C20n-alkanes. These n-alkanes can be activated via fumarate addition by mixed cultures containing Smithella and Desulfatibacillum species under methanogenic conditions. These observations provide a fundamental understanding of long-n-alkane metabolism under methanogenic conditions and have important applications for the remediation of oil-contaminated sites and for energy recovery from oil reservoirs.

Methanogenic degradation of branched alkanes in enrichment cultures of production water from a high-temperature petroleum reservoir.

Branched alkanes are important constituents of crude oil and are usually regarded as resistant to microbial degradation, resulting in little knowledge of biochemical processes involved in anaerobic branched alkanes biodegradation. Here, we initiated an incubation study by amendment of iso-C9 (2-methyl, 3-methyl, and 4-methyloctane) as substrates for methanogenic degradation in production water from a high-temperature petroleum reservoir. Over an incubation period of 367 days, significant methanogenesis was observed in samples amended with these branched alkanes. The strong methanogenic activity only observed in iso-C9 amendments suggested the presence of microbial transformation from iso-alkanes into methane. GC-MS-based examination of the original production water identified an intermediate tentatively to be iso-C9-like alkylsuccinate, but was not detected in the enrichment cultures, combined with the successful amplification of assA functional gene in inoculating samples, revealing the ability of anaerobic biodegradation of iso-C9 via fumarate addition pathway. Microorganisms affiliated with members of the Firmicutes, Synergistetes, and methanogens of genus Methanothermobacter spp. were highly enriched in samples amended with iso-C9. The co-occurrence of known syntrophic acetate oxidizers Thermoacetogenium spp. and Methanothermobacter spp. (known hydrogenotrophic methanogens) indicates a potential syntrophic acetate oxidation associated with the methanogenic biodegradation of iso-C9. These results provide some useful information on the potential biodegradation of branched alkanes via methanogenesis and also suggest that branched alkanes are likely activated via fumarate addition in high-temperature petroleum reservoirs.

Tepidicella baoligensis sp. nov., A Novel Member of Betaproteobacterium Isolated from an Oil Reservoir.

A Gram-negative, non-pigmented, aerobic bacterium, designated strain B18-50T was isolated from oil-well production water in Baolige oilfield, China. The strain was able to grow at pH 6.5-10.5 (optimum at pH 7.5-8.5), in 0-3% (w/v) NaCl (optimum at 0-0.5%, w/v) and at 20-60 °C (optimum at 45 °C). Cells of the isolate were motile with a single polar flagellum and non-spore-forming rods. Organic acids and amino acids were used as carbon and energy sources, but sugars and polyols were not assimilated. The major cellular fatty acids were C16:0, C16:1ω6c/ω7c, and C18:1ω7c. Ubiquinone 8 was the predominant respiratory quinone. The major polar lipids consisted of phosphatidylethanolamine, phosphatidylglycerol, and diphosphatidylglycerol. The genomic DNA G+C content of the isolate was 62.8 mol%. Phylogenetic analysis based on 16S rRNA gene sequences revealed that strain B18-50T was most closely related to Tepidicella xavieri DSM 19605T (97.5% similarity). Comparative analysis of genotypic and phenotypic features indicate that strain B18-50T represents a novel species of the genus Tepidicella, for which the name Tepidicella baoligensis sp. nov. is proposed. The type strain is B18-50T (= CGMCC 1.13575T = KCTC 62779T).

Microfluidic Diffusion Platform for Characterizing the Sizes of Lipid Vesicles and the Thermodynamics of Protein-Lipid Interactions.

Elucidation of the fundamental interactions of proteins with biological membranes under native conditions is crucial for understanding the molecular basis of their biological function and malfunction. Notably, the large surface to volume ratio of living cells provides a molecular landscape for significant interactions of cellular components with membranes, thereby potentially modulating their function. However, such interactions can be challenging to probe using conventional biophysical methods due to the heterogeneity of the species and processes involved. Here, we use direct measurements of micron scale molecular diffusivity to detect and quantify the interactions of α-synuclein, associated with the etiology of Parkinson's disease, with negatively charged lipid vesicles. We further demonstrate that this microfluidic approach enables the characterization of size distributions of different binary mixtures of vesicles, which are not readily accessible using conventional light scattering techniques. Finally, the size distributions of the two α-synuclein conformations, free α-synuclein and membrane-bound α-synuclein, were resolved under varying lipid:protein ratios, thus, allowing the determination of the dissociation constant and the binding stoichiometry associated with this protein-lipid system. The microfluidic diffusional sizing platform allows these measurements to be performed on a time scale of minutes using microlitre volumes, thus, establishing the basis for an approach for the study of molecular interactions of heterogeneous systems under native conditions.

Coralloluteibacterium thermophilus sp. nov., A Gammaproteobacterium Isolated from an Oil Reservoir.

A Gram-negative, yellow-pigmented, aerobic bacterium, designated strain B51-30T, was isolated from oil-well production liquid in Baolige oilfield, China. The strain was able to grow at pH 6-10 (optimum at pH 7.5), in 0-6% (w/v) NaCl (optimum at 1%, w/v) at 15-55 °C (optimum at 45 °C). Cells of the isolate were non-motile and non-spore-forming rods. The major cellular fatty acids were iso-C15:0, iso-C11:0, iso-C11:0 3OH, iso-C17:1 ω9c, and iso-C17:0. Ubiquinone 8 was the predominant respiratory quinone. The major polar lipids consisted of phosphatidylethanolamine and diphosphatidylglycerol. The genomic DNA G+C content of the isolate was 70.6 mol%. Phylogenetic analysis based on 16S rRNA gene sequences revealed that strain B51-30T was most closely related to Coralloluteibacterium stylophorae KCTC 52167T (98.7% similarity). The two strains showed DNA-DNA relatedness values of 58.5%. Genotypic and phenotypic features indicate that strain B51-30T represents a novel species of the genus Coralloluteibacterium, for which the name Coralloluteibacterium thermophilus sp. nov. is proposed. The type strain is B51-30T (= CGMCC 1.13574T = KCTC 62780T).

Anaerobic biodegradation of partially hydrolyzed polyacrylamide in long-term methanogenic enrichment cultures from production water of oil reservoirs.

The increasing usage of partially hydrolyzed polyacrylamide (HPAM) in oilfields as a flooding agent to enhance oil recovery at so large quantities is an ecological hazard to the subsurface ecosystem due to persistence and inertness. Biodegradation of HPAM is a potentially promising strategy for dealing with this problem among many other methods available. To understand the responsible microorganisms and mechanism of HPAM biodegradation under anaerobic conditions, an enrichment culture from production waters of oil reservoirs were established with HPAM as the sole source of carbon and nitrogen incubated for over 328 days, and analyzed using both molecular microbiology and chemical characterization methods. Gel permeation chromatography, High-pressure liquid chromatography and Fourier-transformed infrared spectroscopy results indicated that, after 328 days of anaerobic incubation, some of the amide groups on HPAM were removed and released as ammonia/ammonium and carboxylic groups, while the carbon backbone of HPAM was converted to smaller polymeric fragments, including oligomers and various fatty acids. Based on these results, the biochemical process of anaerobic biodegradation of HPAM was proposed. The phylogenetic analysis of 16S rRNA gene sequences retrieved from the enrichments showed that Proteobacteria and Planctomycetes were the dominant bacteria in the culture with HPAM as the source of carbon and nitrogen, respectively. For archaea, Methanofollis was more abundant in the anaerobic enrichment. These results are helpful for understanding the process of HPAM biodegradation and provide significant insights to the fate of HPAM in subsurface environment and for possible bioremediation.

Characterization of bacterial composition and diversity in a long-term petroleum contaminated soil and isolation of high-efficiency alkane-degrading strains using an improved medium.

Bacterial community and diversity in a long-term petroleum-contaminated soil of an oilfield were characterized using 16S rRNA gene-based Illumina MiSeq high-throughput sequencing. Results indicated that Proteobacteria (49.11%) and Actinobacteria (24.24%) were the most dominant phyla, and the most abundant genera were Pseudoxanthomonas (8.47%), Luteimonas (3.64%), Alkanindiges (9.76%), Acinetobacter (5.26%) and Agromyces (8.56%) in the soil. Meanwhile a series of cultivations were carried out for isolation of alkane degraders from petroleum-contaminated soil with gellan gum and agar as gelling agents. And the isolates were classified by their 16S rRNA genes. Nine of the isolates including Enterobacter, Pseudomonas,Acinetobacter, Rhizobium, Bacillus, Sphingomonas, Paenibacillus, Variovorax and Rhodococcus showed strong biodegradability of alkane mixture (C9-C30) in a wide range of chain-length, which could be potentially applied in enhancement of bioremediation.

Iron oxides alter methanogenic pathways of acetate in production water of high-temperature petroleum reservoir.

Acetate is a key intermediate in anaerobic crude oil biodegradation and also a precursor for methanogenesis in petroleum reservoirs. The impact of iron oxides, viz. ß-FeOOH (akaganéite) and magnetite (Fe3O4), on the methanogenic acetate metabolism in production water of a high-temperature petroleum reservoir was investigated. Methane production was observed in all the treatments amended with acetate. In the microcosms amended with acetate solely about 30% of the acetate utilized was converted to methane, whereas methane production was stimulated in the presence of magnetite (Fe3O4) resulting in a 48.34% conversion to methane. Methane production in acetate-amended, ß-FeOOH (akaganéite)-supplemented microcosms was much faster and acetate consumption was greatly improved compared to the other conditions in which the stoichiometric expected amounts of methane were not produced. Microbial community analysis showed that Thermacetogenium spp. (known syntrophic acetate oxidizers) and hydrogenotrophic methanogens closely related to Methanothermobacter spp. were enriched in acetate and acetate/magnetite (Fe3O4) microcosms suggesting that methanogenic acetate metabolism was through hydrogenotrophic methanogenesis fueled by syntrophic acetate oxidizers. The acetate/ß-FeOOH (akaganéite) microcosms, however, differed by the dominance of archaea closely related to the acetoclastic Methanosaeta thermophila. These observations suggest that supplementation of ß-FeOOH (akaganéite) accelerated the production of methane further, driven the alteration of the methanogenic community, and changed the pathway of acetate methanogenesis from hydrogenotrophic methanogenesis fueled by syntrophic acetate oxidizers to acetoclastic.

Propionate metabolism and diversity of relevant functional genes by in silico analysis and detection in subsurface petroleum reservoirs.

Propionate is a common metabolic intermediate occurring in environmental samples including petroleum reservoirs. Available microbial genomes were obtained from the NCBI database and analyzed in silico by hmmscan to check three metabolic pathways of propionate production in petroleum reservoir systems. The succinate pathway was the dominant one while the other two (lactate and 1,2-propanediol pathways) contributed less to the formation of propionate according to the Hidden Markov Model calculation. The mmdA gene encoding methylmalonyl-CoA decarboxylase was used as a biomarker gene to detect the diversity of microbes involved in the propionate formation in Jiangsu oil reservoirs. The mmdA gene clone library showed that microbes affiliated within the genus of Archaeoglobus, Thermococcus, Anaerobaculum, as well as more than ten other genera were the potential microorganisms involved in the production of propionate. Meanwhile, as the biomarker genes involved in the other two propionate-producing pathways, the functional genes of lcdA and pduP were tested with PCR amplification, but no positive results were observed in Jiangsu oil reservoirs.

Binding structure and kinetics of surfactin monolayer formed at the air/water interface to counterions: A molecular dynamics simulation study.

The binding structure and kinetics of ionized surfactin monolayer formed at the air/water interface to five counterions, Li+, Na+, K+, Ca2+, and Ba2+ (molar ratios of surfactin to monovalent and divalent counterions are 1:2 and 1:1 respectively), have been studied using molecular dynamics simulation. The results show that surfactin exhibits higher binding affinity to divalent counterions, Ca2+, and Ba2+, and smaller monovalent counterion, Li+, than Na+ and K+. Both carboxyl groups in surfactin are accessible for counterions, but the carboxyl group in Glu1 is easier to access by counterions than Asp5. Salt bridges are widely built between carboxyl groups by counterions, and the probability of the formation of intermolecular salt bridge is markedly larger than that of intramolecular salt bridge. Divalent counterions perform well in forming salt bridges between carboxyl groups. The salt bridges mediated by Ca2+ are so rigid that the lifetimes are about 0.13 ns, and the break rates of these salt bridges are 1-2 orders of magnitude smaller than those mediated by K+ which is about 5 ps in duration. The positions of the hydration layer of carboxyl groups are independent of counterions, but the bound counterions induce the dehydration of carboxyl groups and disturb the hydrogen bonds built between carboxyl group and hydration water.

Microbial community dynamics in Baolige oilfield during MEOR treatment, revealed by Illumina MiSeq sequencing.

This study was carried out to understand microbial diversity and function in the microbial enhanced oil recovery (MEOR) process and to assess the impact of MEOR treatment on the microbial community in an oil reservoir. The Illumina MiSeq-based method was used to investigate the structure and dynamics of the microbial community in a MEOR-treated block of the Baolige oilfield, China. The results showed that microbial diversity was high and that 23 phyla occurred in the analyzed samples. Proteobacteria, Firmicutes, Bacteroidetes, Thermotogae, and Euryarchaeota were present in relatively high abundance in all analyzed samples. Injection of bacteria and nutrients resulted in interesting changes in the composition of the microbial community. During MEOR treatment, the community was dominated by the known hydrocarbon-utilizing genera Pseudomonas and Acinetobacter. After the treatment, the two genera decreased in abundance over time while Methanobacteriaceae, as well as known syntrophic genera such as Syntrophomonas, Pelotomaculum, Desulfotomaculum, and Thermacetogenium gradually increased. The change in dominant microbial populations indicated the presence of a succession of microbial communities over time, and the hydrocarbon degradation and syntrophic oxidation of acetate and propionate to methane in the MEOR-treated oilfield. This work contributes to a better understanding of microbial processes in oil reservoirs and helps to optimize MEOR technology.

Molecular cloning and expression of a new α-neoagarobiose hydrolase from Agarivorans gilvus WH0801 and enzymatic production of 3,6-anhydro-l-galactose.

A new α-neoagarobiose hydrolase (NABH) called AgaWH117 was cloned from Agarivorans gilvus WH0801. The gene encoding this hydrolase consists of 1,086 bp and encodes a protein containing 361 amino acids. This new NABH showed 74% amino acid sequence identity with other known NABHs. The molecular mass of the recombinant AgaWH117 was estimated to be 41 kDa. Purified AgaWH117 showed endolytic activity during neoagarobiose degradation, yielding 3,6-anhydro-l-galactose (l-AHG) and d-galactose as products. It showed a maximum activity at a temperature of 30 °C and a pH of 6.0 and was stable at temperatures below 30 °C. Its Km and Vmax values were 2.094 mg/mL and 6.982 U/mg, respectively. The cloning strategy used and AgaWH117 isolated in this study will provide information on the saccharification process of marine biomass. This study provides a method to produce l-AHG from agarose by using AgaWH117 without an acid and describes its one-step purification by using Bio-Gel P2 chromatography.