Exploiting Enzyme in the Polymer Synthesis for a Remarkable Increase in Thermal Conductivity.

The interest in polymers with high thermal conductivity increased much because of their inherent properties such as low density, low cost, flexibility, and good chemical resistance. However, it is challenging to engineer plastics with good heat transfer characteristics, processability, and required strength. Improving the degree of the chain alignment and forming a continuous thermal conduction network is expected to enhance thermal conductivity. This research aimed to develop polymers with a high thermal conductivity that can be interesting for several applications. Two polymers, namely poly(benzofuran-co-arylacetic acid) and poly(tartronic-co-glycolic acid), with high thermal conductivity containing microscopically ordered structures were prepared by performing enzyme-catalyzed (Novozyme-435) polymerization of the corresponding α-hydroxy acids 4-hydroxymandelic acid and tartronic acid, respectively. A comparison between the polymer's structure and heat transfer obtained by mere thermal polymerization before and enzyme-catalyzed polymerization will now be discussed, revealing a dramatic increase in thermal conductivity in the latter case. The polymer structures were investigated by FTIR spectroscopy, nuclear magnetic resonance (NMR) spectroscopy in liquid- and solid-state (ss-NMR), and powder X-ray diffraction. The thermal conductivity and diffusivity were measured using the transient plane source technique.

Preclinical Evaluation of NHS-Activated Gold Nanoparticles Functionalized with Bombesin or Neurotensin-Like Peptides for Targeting Colon and Prostate Tumours.

Recent advances and large-scale use of hybrid imaging modalities like PET-CT have led to the necessity of improving nano-drug carriers that can facilitate both functional and metabolic screening in nuclear medicine applications. In this study, we focused on the evaluation of four potential imaging nanoparticle structures labelled with the 68Ga positron emitter. For this purpose, we functionalized NHS-activated PEG-gold nanoparticles with 68Ga-DOTA-Neuromedin B, 68Ga-DOTA-PEG(4)-BBN(7-14), 68Ga-DOTA-NT and 68Ga-DOTA-Neuromedin N. In vitro binding kinetics and specific binding to human HT-29 colon carcinoma cells and DU-145 prostate carcinoma cells respectively were assessed, over 75% retention being obtained in the case of 68Ga-DOTA-PEG(4)-BBN(7-14)-AuNP in prostate tumour cells and over 50% in colon carcinoma cells. Biodistribution in NU/J mice highlighted a three-fold uptake increase in tumours at 30 min post-injection of 68Ga-DOTA-NT-AuNP and 68Ga-DOTA-PEG(4)-BBN(7-14)-AuNP compared to 68Ga-DOTA-NT and 68Ga-DOTA-PEG(4)-BBN(7-14) respectively, therewith fast distribution in prostate and colon tumours and minimum accumulation in non-targeted tissues.

Green Synthesis of Gold, Silver, Copper, and Magnetite Particles Using Poly(tartaric acid) Simultaneously as Coating and Reductant.

Poly(tartaric acid) is a relatively recently described polymer that can be easily synthesized and scaled up from a readily available renewable material (tartaric acid). This article demonstrates its use in a green synthesis of gold nanoparticles, silver nanoparticles, copper particles, and magnetite nanoparticles. In this case poly(tartaric acid) acts both as a reductant and as a coating agent. To our knowledge this is the first green synthesis of several different types of nanoparticles using only one reagent (polytartrate) as both reductant and coating. The resulting particles were analyzed by XRD, TEM/SEM, EDX, FTIR, DLS, zeta-potential, XPS, and UV/VIS spectroscopy. Preliminary studies of the thermal behavior of mixtures of different types of particles with poly(tartaric acid) were also conducted. The obtained particles show different sizes depending on the material, and the coating allows for better dispersibility as well as potential further functionalization, making them potentially useful also for other applications, besides the inclusion in polymer composites.

Analysis of Functionalized Ferromagnetic Memory Alloys from the Perspective of Developing a Medical Vascular Implant.

Durable biocompatible metal vascular implants are still one of the significant challenges of contemporary medicine. This work presents the preparation of ferromagnetic biomaterials with shape memory in metal strips based on FePd (30 at% Pd) that is either not doped or doped with Ga and Mn, coated with poly(benzofuran-co-arylacetic acid) or polyglutamic acid. The coating of the metal strips with polymers was achieved after the metal surface had been previously treated with open-air cold plasma. The final functionalization was performed to induce anti-thrombogenic/thrombolytic properties in the resulting materials. SEM-EDX microscopy and X-ray photoelectron microscopy (XPS) determined the morphology and composition of the metal strips covered with polymers. In vitro tests of standardized thromboplastin time (PTT) and prothrombin time (PT) were performed to evaluate the thrombogenicity of these biofunctionalized materials for future possible monitoring of the implant in patients.

Development of a New Eco-Friendly Copolymer Based on Chitosan for Enhanced Removal of Pb and Cd from Water.

Worldwide, concerns about heavy metal contamination from manmade and natural sources have increased in recent decades. Metals released into the environment threaten human health, mostly due to their integration into the food chain and persistence. Nature offers a large range of materials with different functionalities, providing also a source of inspiration for scientists working in the field of material synthesis. In the current study, a new type of copolymer is introduced, which was synthesized for the first time by combining chitosan and poly(benzofurane-co-arylacetic acid), for use in the adsorption of toxic heavy metals. Such naturally derived materials can be easily and inexpensively synthesized and separated by simple filtration, thus becoming an attractive alternative solution for wastewater treatment. The new copolymer was investigated by solid-state nuclear magnetic resonance, thermogravimetric analysis, scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray photon electron microscopy. Flame atomic absorption spectrometry was utilized to measure heavy metal concentrations in the investigated samples. Equilibrium isotherms, kinetic 3D models, and artificial neural networks were applied to the experimental data to characterize the adsorption process. Additional adsorption experiments were performed using metal-contaminated water samples collected in two seasons (summer and winter) from two former mining areas in Romania (Roșia Montana and Novaț-Borșa). The results demonstrated high (51-97%) adsorption efficiency for Pb and excellent (95-100%) for Cd, after testing on stock solutions and contaminated water samples. The recyclability study of the copolymer indicated that the removal efficiency decreased to 89% for Pb and 58% for Cd after seven adsorption-desorption cycles.

Effective Removal of Crystal Violet Dye Using Neoteric Magnetic Nanostructures Based on Functionalized Poly(Benzofuran-co-Arylacetic Acid): Investigation of the Adsorption Behaviour and Reusability.

Synthetic dyes represent a significant class of contaminants released in the environment. Crystal violet is a triarylmethane dye used in several fields such as printing inks, the textile or paper industries, as well as in cell histology. Coating magnetic nanoparticles with functionalized polymers has been proved to improve their efficiency, offering unique properties for applications in wastewater treatment. The current paper focuses on preparing and characterising magnetic core-shell nanoparticles coated with poly(benzofuran-co-arylacetic acid) functionalized with folic acid as an organic shell. The new polymer-based magnetic nanostructures were applied for crystal violet extraction from aqueous solutions. The nanostructures were structurally and morphologically investigated by Fourier-transform infrared (FTIR) spectroscopy and transmission electron microscopy (TEM). While thermal and magnetic properties of the magnetic nanostructures were determined by thermogravimetric analysis (TGA) and magnetization measurements (VSM). At the same time, crystal violet concentrations were determined by UV-VIS spectroscopy. The influence of initial dye concentration and contact time on the removal efficiency has been studied to achieve the optimum adsorption conditions. The dye adsorbent neoteric magnetic nanostructure was easily desorbed and reused, the adsorption capacity decreasing from 100% to 97.63% in the first five cycles, reaching a minimum of 88.74% after the 10th recycling step.

Aminopropylimidazole as an Advantageous Coating in the Synthesis of Functionalized Magnetite Nanoparticles.

Implementing new methods to prepare magnetite nanoparticles with a covered or uncovered surface has been, and still is, a significant challenge. In this work, we describe a very clear and effortless way for the preparation of magnetite nanoparticles using two types of bases, namely: 1-(3-aminopropyl)imidazole and sodium hydroxide. Fourier transform infrared spectroscopy (FTIR) served as a tool for the structural investigation of the as-prepared magnetite nanoparticles. The morphology of the samples was investigated using Transmission Electron Microscopy (TEM). Comprehensive high-resolution X-ray photoelectron spectroscopy investigations (XPS) were applied as an effective tool for analyzing the composition of the various types of magnetic nanoparticles. Further polymer linkage was accomplished with poly(benzofuran-co-arylacetic acid) on the amino-functionalized surface of aminopropylimidazole-containing magnetic nanoparticles. The findings are promising for biomedicine, catalysis, and nanotechnology applications.

Chitosan Functionalized Magnetic Nanoparticles to Provide Neural Regeneration and Recovery after Experimental Model Induced Peripheral Nerve Injury.

(1) Background: Peripheral nerve injuries have a great impact on a patient's quality of life and a generally poor outcome regarding functional recovery. Lately, studies have focused on different types of nanoparticles and various natural substances for the treatment of peripheral nerve injuries. This is the case of chitosan, a natural compound from the crustaceans' exoskeleton. The present study proposes to combine chitosan benefic properties to the nanoparticles' ability to transport different substances to specific locations and evaluate the effects of magnetic nanoparticles functionalized with chitosan (CMNPs) on peripheral nerve injuries' rehabilitation by using an in vivo experimental model. (2) Methods: CMNPs treatment was administrated daily, orally, for 21 days to rats subjected to right sciatic nerve lesion and compared to the control group (no treatment) by analyzing the sciatic functional index, pain level, body weight, serum nerve growth factor levels and histology, TEM and EDX analysis at different times during the study. (3) Results: Animals treated with CMNPs had a statistically significant functional outcome compared to the control group regarding: sciatic functional index, pain-like behavior, total body weight, which were confirmed by the histological and TEM images. (4) Conclusions: The results of the study suggest that CMNPs appear to be a promising treatment method for peripheral nerve injuries.

Enzymatic synthesis of short-chain flavor esters from natural sources using tailored magnetic biocatalysts.

Immobilized lipases are excellent biocatalysts for the enzymatic synthesis of short- and medium-chain fatty esters used as food flavor compounds. Herein a new approach for a magnetic core-shell biocatalyst by immobilization of Candida antarctica B lipase is reported, coating single-core magnetic nanoparticles with an organic shell, preferably poly(benzofurane-co-arylacetic acid), followed by the covalent attachment of the enzyme and embedment of the primary biocatalyst in a silica layer. Although covalent and sol-gel immobilization were efficient on their own, their combination can ensure additional operational stability through multi-point linkages. Moreover, silanes holding glycidoxy groups, which can also form covalent linkages, have been successfully used as precursors for the silica coating layer. The structural, magnetic and morphological characteristics were assessed by TEM, SEM-EDX, X-ray photoelectron spectroscopy and vibrating sample magnetometry. The new biocatalysts demonstrated high catalytic efficiency in the solventless synthesis of isoamyl esters of natural carboxylic acids, also in multiple reaction cycles.

Refinement of Magnetite Nanoparticles by Coating with Organic Stabilizers.

Magnetite nanoparticles are of great importance in nanotechnology and nanomedicine and have found manifold applications. Here, the effect of coating of magnetite nanoparticles with organic stabilizers, such as O-phosphoryl ethanolamine, glycerol phosphate, phospho-l-ascorbic acid, phospho-d,l-serine, glycolic acid, lactic acid, d,l-malic acid, and d,l-mandelic acid was studied. Remarkably, this procedure led to an improvement of saturation magnetization in three cases rather than to an unfavorable decrease as usually observed. Detailed X-ray powder diffraction investigations revealed that changes in the average crystallite occurred in the coating process. Surprisingly, changes of the average crystallite sizes in either direction were further observed, when the exposure time to the stabilizer was increased. These results imply a new mechanism for the well-known coating of magnetite nanoparticles with stabilizers. Instead of the hitherto accepted simple anchoring of the stabilizers to the magnetite nanoparticle surfaces, a more complex recrystallization mechanism is likely, wherein partial re-dispersion of magnetite moieties from the nanoparticles and re-deposition are involved. The results can help producers and users of magnetite nanoparticles to obtain optimal results in the production of core shell magnetite nanoparticles.