Formulation development and in-vitro/in-vivo correlation for a novel Sterculia gum-based oral colon-targeted drug delivery system of azathioprine.

The present study was aimed at designing a microflora triggered colon-targeted drug delivery system (MCDDS) based on swellable polysaccharide, Sterculia gum in combination with biodegradable polymers with a view to target azathioprine (AZA) in the colon for the treatment of IBD with reduced systemic toxicity. The microflora degradation study of gum was investigated in rat cecal medium. The polysaccharide tablet was coated to different film thicknesses with blends of chitosan/Eudragit RLPO and over coated with Eudragit L00 to provide acid and intestinal resistance. Swelling and drug release studies were carried out in simulated gastric fluid (SGF) (pH 1.2), simulated intestinal fluid (SIF) (pH 6.8) and simulated colonic fluid (SCF) (pH 7.4 under anaerobic environment), respectively. Drug release study in SCF revealed that swelling force of the gum could concurrently drive the drug out of the polysaccharide core due to the rupture of the chitosan/Eudragit coating in microflora-activated environment. Chitosan in the mixed film coat was found to be degraded by enzymatic action of the microflora in the colon. Release kinetic data revealed that, the optimized MCDDS was fitted well into first order model and apparent lag time was found to be 6 h, followed by Higuchi spherical matrix release. The degradation of chitosan was the rate-limiting factor for drug release in the colon. In-vivo study in rabbit shows delayed T(max), prolonged absorption time, decreased C(max) and absorption rate constant (Ka) indicating reduced systemic toxicity of the drug as compared to other dosage forms.

Design, development and optimization of oral colon targeted drug delivery system of azathioprine using biodegradable polymers.

The present study was aimed at designing a microflora triggered colon targeted drug delivery system (MCDDS) based on swellable polysaccharide, Sterculia gum in combination with biodegradable polymers with a view to specifically deliver azathioprine in the colonic region for the treatment of IBD with reduced systemic toxicity. The microflora degradation properties of Sterculia gum was investigated in rat caecal phosphate buffer medium. The polysaccharide tablet cores were coated to different film thicknesses with blends of Eudragit RLPO and chitosan and overcoated with Eudragit L00 to provide acid and intestinal resistance. Swelling and drug release studies were carried out in simulated gastric fluid, SGF (pH 1.2), simulated intestinal fluid, SIF (pH 6.8) and simulated colonic fluid, SCF (pH 7.4 under anaerobic environment), respectively. Drug release study in SCF revealed that swelling force of the Sterculia gum could concurrently drive the drug out of the polysaccharide core due to the rupture of the chitosan/Eudargit coating in microflora activated environment. The degradation of chitosan was the rate-limiting factor for drug release in the colon. Drug release from the MCDDS was directly proportional to the concentration of the pore former (chitosan), but inversely related to the Eudragit RLPO coating thickness.

Preparation and in vitro dissolution profile of zidovudine loaded microspheres made of Eudragit RS 100, RL 100 and their combinations.

The objective of present investigation was to evaluate the entrapment efficiency of the anti-HIV drug, zidovudine, using two Eudragit polymers of different permeability characteristics and to study the effect of this entrapment on the drug release properties. In order to increase the entrapment efficiency optimum concentration of polymer solutions were prepared in acetone using magnesium stearate as droplet stabilizer. The morphology of the microspheres was evaluated using a scanning electron microscope, which showed a spherical shape with smooth surface. The mean sphere diameter was between 1000-3000 microm and the entrapment efficiencies ranged from 56.4-87.1%. Polymers were used separately and in combination to prepare different microspheres. The prepared microspheres were studied for drug release behavior in phosphate buffer at pH 7.4, because the Eudragit polymers are independent of the pH of the dissolution medium. The release profiles and entrapment efficiencies depended strongly on the structure of the polymers used as wall materials. The release rate of zidovudine from Eudragit RS 100 microspheres was much lower than that from Eudragit RL 100 microspheres. Evaluation of release data reveals that release of zidovudine from Eudragit RL 100 microspheres followed the Higuchi rule, whereas Eudragit RS 100 microspheres exhibited an initial burst release, a lag period for entry of surrounding dissolution medium into polymer matrix and finally, diffusion of drug through the wall material.

Design, Development, and Optimization of Sterculia Gum-Based Tablet Coated with Chitosan/Eudragit RLPO Mixed Blend Polymers for Possible Colonic Drug Delivery.

The purpose of this study is to explore the possible applicability of Sterculia urens gum as a novel carrier for colonic delivery system of a sparingly soluble drug, azathioprine. The study involves designing a microflora triggered colon-targeted drug delivery system (MCDDS) which consists of a central polysaccharide core and is coated to different film thicknesses with blends of chitosan/Eudragit RLPO, and is overcoated with Eudragit L00 to provide acid and intestinal resistance. The microflora degradation property of gum was investigated in rat caecal medium. Drug release study in simulated colonic fluid revealed that swelling force of the gum could concurrently drive the drug out of the polysaccharide core due to the rupture of the chitosan/Eudargit coating in microflora-activated environment. Chitosan in the mixed film coat was found to be degraded by enzymatic action of the microflora in the colon. Release kinetic data revealed that the optimized MCDDS was fitted well into first-order model, and apparent lag time was found to be 6 hours, followed by Higuchi release kinetics. In vivo study in rabbits shows delayed T max, prolonged absorption time, decreased C max, and absorption rate constant (Ka), indicating a reduced systemic toxicity of the drug as compared to other dosage forms.

Studies on stercuia gum formulations in the form of osmotic core tablet for colon-specific drug delivery of azathioprine.

The purpose of this research is to evaluate Sterculia urens gum as a carrier for a colon-targeted drug delivery system. Microflora degradation studies of Sterculia gum was conducted in phosphate-buffered saline pH 7.4 containing rat caecal medium under an anaerobic environment. Solubility, swelling index, viscosity, and pH of the polymer solution were determined. Different formulation aspects considered were gum concentration (10-40%) and concentration of citric acid (10-30%) on the swelling index and in-vitro dissolution release. The results of the isothermal stress testing showed that there is no degradation of samples of model drug, azathioprine, the drug polymer mixture, and the core tablet excipients. Differential scanning calorimetry and Fourier transform infrared spectroscopy study proved the compatibility of the drug with Sterculia gum and other tablet excipients. Microflora degradation study revealed that Sterculia gum can be used as tablet excipient for drug release in the colonic region by utilizing the action of enterobacteria. The swelling force of the Sterculia gum could concurrently drive the drug out of the polysaccharide core due to the rupture of the mixed film coating under colonic microflora-activated environment. Sterculia gum gives premature drug release in the upper gastrointestinal tract without enteric coating and may not reach the colonic region. Sterculia gum as a colon-targeting carrier is possible via double-layer coating with chitosan/Eudragit RLPO (ammonio-methacrylate copolymer) mixed blend as well as enteric polymers, which would provide acid as well as intestinal resistance but undergo enzymatic degradation once reaching the colon. LAY ABSTRACT: The aim of the research is to evaluate wheather Sterculia urens, which is a polysaccharide, is suitable as a carrier for colonic delivery of drugs acting locally in the colon. Sterculia gum has been reported to have wide pharmaceutical applications such as tablet binder, disintegrant, gelling agent, and as a controlled release polymer. Sterculia gum falls under the category of a polysaccharide and is yet to be evaluated as a carrier for colonic delivery of drugs. First the susceptibility of the polysaccharide gum in rat caecal microflora was investigated because true polysaccharides are degraded by the action of normal colonic bacteria. Bacterial degradation of the gum in the colonic environment was confirmed by adding a small quantity of the gum in rat caecal content mixed with phosphate-buffered saline pH 7.4 under an anaerobic environment. Solubility, swelling index, viscosity, and pH of the polymer solution were determined. Different formulation aspects considered were gum concentration (10-40%), concentration of citric acid (10-30%) on swelling index, and in vitro dissolution behavior. Isothermal stress testing was done to determine that there was no degradation of the model drug, azathioprine, with Sterculia gum excipient mixtures under stressed conditions. Differential scanning calorimetry and Fourier transform infrared spectroscopy study proved the compatibility of the drug with Sterculia gum and other tablet excipients. Microflora degradation study revealed that Sterculia gum is digested by the colonic microflora and therefore can be used as a tablet excipient for drug release in the colonic region utilizing the microflora degradation mechanism. Sterculia gum gives premature drug release in the upper gastrointestinal tract without enteric coating and may not reach the colonic region. Sterculia gum as colon-targeting carrier is possible via double-layer coating with chitosan/Eudragit RLPO (ammonio-methacrylate copolymer) and Eudragit L100 polymers, which would provide acid as well as intestinal resistance but undergo enzymatic degradation once reaching the colon.

Preparation and Characterization of Salbutamol Sulphate Loaded Ethyl Cellulose Microspheres using Water-in-Oil-Oil Emulsion Technique.

The aim of this study was to formulate and evaluate microencapsulated controlled release preparations of a highly water/soluble drug, salbutamol sulphate by (water in oil) in oil emulsion technique using ethyl cellulose as the retardant material. Various processing and formulation parameters such as drug/polymer ratio, stirring speed, volume of processing medium were optimized to maximize the entrapment. The release of salbutamol sulphate from ethyl cellulose microsphere was compared and possible release mechanism proposed. Microspheres were prepared by water in oil emulsion technique using acetonitrile/dichloromethane (1:1 ratio) solvent system. Span 80 was used as the dispersing agent and n-hexane was added to harden the microspheres. The prepared microspheres were characterized for their micromeritic properties and drug loading, as well as compatibility by infrared spectroscopy, differential scanning calorimetry (DSC), X-ray powder diffractometry and scanning electron microscopy (SEM). The in-vitro release studies were carried out in phosphate buffer at pH 7.4. The prepared microspheres were white, free flowing and spherical in shape. The drug-loaded microspheres showed 55.7 - 76.6 % of entrapment and release was extended up to 10 h. Various processing and formulation parameters such as drug/polymer ratio, stirring speed, volume of processing medium, etc. significantly affect the drug release from the microspheres. The best/fit release kinetics was achieved with Higuchi plot followed by zero order and first order. The release of salbutamol sulphate was influenced by altering the drug to polymer ratio and the drug release was found to be diffusion controlled.