RESUMEN
We report a new strategy for ligand-free attachment of plasmonic Au nanoparticles on the surface of a ZnO nanowire to make high-performance broadband photodetectors using a pulsed laser ablation technique in a liquid medium. The photoresponse of the ZnO-based photodetector is enhanced and the photodetection limit is broadened from UV to visible, which can be controlled by varying the concentration of Au nanoparticles attached to the ZnO surface. This Au nanoparticle concentration can be tuned by varying the number of laser pulses used in the ablation process. We found that the responsivity of the detector is 10 mA W-1 for [Formula: see text] and increases to as much as 0.4 A W-1 for λ ≤ 400 nm for the maximum Au concentration. The enhanced responsivity was found to be linked to increased absorption over a broad spectral range arising from direct and indirect plasmonic processes due to Au nanoparticle attachment, and the enhanced absorption also leads to a large increment in photocurrent generation. We also found that the attachment of Au nanoparticles makes the relaxation of the photocurrent (persistence) considerably faster in both the UV and visible regions of the spectrum and that the persistence directly depends on the concentration of Au nanoparticles attached to the ZnO nanowire. This single-step pulsed laser ablation-based nanoparticle attachment process can be further used to make other plasmonic nanoparticle-decorated nanowire devices.
RESUMEN
PURPOSE: Three experiments were conducted to assess the effect of different doses of gamma radiation on various seedling traits; determine the optimum doses of gamma radiation for different faba bean genotypes; find out the variation in optimum doses with respect to the different times of sowings after irradiation and methods of irradiation. MATERIALS AND METHODS: Five faba bean genotypes viz., L-2013-060, L-2013-092, Anandnagar Local, Gazipur Local and Bangla Gangachar were used in these experiments. In Experiment I, seeds of five experimental genotypes were exposed to different doses (100 Gy 200 Gy, 300 Gy, 400 Gy, 500 Gy, 600 Gy, 700 Gy and 800 Gy) of gamma radiation and were sown immediately after irradiation. In Experiment II, seeds of Bangla Gangachar and L-2013-060 were exposed to varying doses (100-800 Gy) of gamma radiation and were sown at seven sowings starting from 0 h to 24 h at 4-h intervals after irradiation. In Experiment III, L-2013-092 genotypes was exposed to different doses (100 -800 Gy) of gamma radiation with two different methods of irradiation. RESULTS: In Experiment I, the lethal dose 50 (LD50) values have arrived at 140 Gy, 669 Gy, 575 Gy, 386 Gy and 158 Gy for L-2013-060, L-2013-092, Anandnagar Local, Gazipur Local and Bangla Gangachar, respectively. The growth reduction 50 (GR50) doses for different seedling traits ranged from 130 Gy to 320 Gy for L-2013-060, 250 Gy to 480 Gy for L-2013-092, 130 Gy to 370 Gy for Anandnagar Local, 200 Gy to 350 Gy for Gazipur Local and 250 Gy to 400 Gy for Bangla Gangachar. In Experiment II, the values for LD50 of the genotypes Bangla Gangachar and L-2013-060 were significantly singular for different time intervals of sowing. The values of GR50 for most of the seedling traits were found to increase with the delay in sowing after irradiation from 4 to 24 h when compared with the immediately sown seed lots. In Experiment III, LD50 for L-2013-092 was 337 Gy with Method 1 and 669 Gy with Method 2. In Method 1, most of the growth parameters attained GR50 doses lower than Method 2. The first method was found to increase the radiosensitivity of L-2013-092. CONCLUSION: Every experimental genotype used in these three experiments showed dose-dependent retardation of different seedling traits. These optimized doses may be employed to establish mutant populations for exploiting the novel traits of faba bean. The time of sowing after irradiation and method of irradiation was found to be essential for confirming optimum doses.
Asunto(s)
Plantones , Vicia faba , Plantones/efectos de la radiación , Vicia faba/genética , Vicia faba/efectos de la radiación , Rayos gamma , Tolerancia a Radiación , GenotipoRESUMEN
There is a vast scope of area expansion of lentils after harvesting wet rice in South Asia. However, due to the photoperiod effect and terminal heat, the existing short-duration varieties failed to minimize yield loss under late-sown conditions. A mis-splicing causing A/G SNP present in the last nucleotide of exon 3 of early flowering 3 (ELF3) gene (elf3 allele) in a lentil line, L4710, is associated with the photoperiod insensitive flowering and the fast absolute growth rate (AGR). None of the Indian cultivars tested in this study, either early or late, possesses the non-functional elf3 allele. However, the A to G transition in ELF3-exon2 replaces glycine with aspartic acid at the 403rd amino acid in all the Indian varieties tested, compared to the reference sequence of Mediterranean accession, ILL5588. Therefore, targeting A/G SNP of exon 3, a PCR-based codominant marker is developed. The elf3 allele is correlated with the fast AGR and early flowering, but low yield and biomass, in an L4710 × LL56-derived RIL-population, compared to ELF3 carrying alleles when sown on 15th November. However, in a month of delayed sowing (20th December), the same elf3-RILs revealed a higher yield and biomass with slower AGR Moreover, three elf3-carrying lines, grown in delayed condition (20 December) for two consecutive years in three locations, outyielded three popular high-yielding cultivars that carry functional ELF3. Thus, elf3-carrying high-yielding lines could be the breeder's choice to expand and enhance lentil yield in short-season environments and in vast rice fallows of south Asia, where delayed rice harvest occurs frequently.
Asunto(s)
Fabaceae , Lens (Planta) , Alelos , Lens (Planta)/genética , Fotoperiodo , Fabaceae/genética , Sur de Asia , Flores/genéticaRESUMEN
The simultaneous occurrence of high temperature and moisture stress during the reproductive stage of lentil (Lens culinaris Medik) constrains yield potential by disrupting the plant defense system. We studied the detrimental outcomes of heat and moisture stress on rainfed lentils under residual moisture in a field experiment conducted on clay loam soil (Aeric Haplaquept) in eastern India from 2018 to 2019 and from 2019 to 2020 in winter seasons. Lentil was sown on two dates (November and December) to expose the later sowing to higher temperatures and moisture stress. Foliar sprays of boron (0.2% B), zinc (0.5% Zn), and iron (0.5% Fe) were applied individually or in combination at the pre-flowering and pod development stages. High temperatures increased malondialdehyde (MDA) content due to membrane degradation and reduced leaf chlorophyll content, net photosynthetic rate, stomatal conductance, water potential, and yield (kg ha-1). The nutrient treatments affected the growth and physiology of stressed lentil plants. The B+Fe treatment outperformed the other nutrient treatments for both sowing dates, increasing peroxidase (POX) and ascorbate peroxidase (APX) activities, chlorophyll content, net photosynthetic rate, stomatal conductance, relative leaf water content (RLWC), seed filling duration, seed growth rate, and yield per hectare. The B+Fe treatment increased seed yield by 35-38% in late-sown lentils (December). In addition, the micronutrient treatments positively impacted physiological responses under heat and moisture stress with B+Fe and B+Fe+Zn alleviating heat and moisture stress-induced perturbations. Moreover, the exogenous nutrients helped in improving physiochemical attributes, such as chlorophyll content, net photosynthetic rate, stomatal conductance, water potential, seed filling duration, and seed growth rate.
RESUMEN
Liposomal amphotericin B (LAmB) is the drug of choice in Bangladesh to eliminate the burden of visceral leishmaniasis, also known as kala-azar, a fatal protozoan parasitic disease if left untreated. We aimed to assess efficacy and safety of a single-dose (10 mg/kg) LAmB in visceral leishmaniasis (VL) treatment among the visiting children and adults in a tertiary care setting. This prospective study includes 11 children and 19 adults with a confirmed diagnosis of kala-azar (total 30 cases). Intravenous infusion of LAmB (10 mg/kg body weight) was given to all of the patients. Clinical assessments were conducted during treatment, before hospital discharge, and on days 30 and 180 after treatment. Efficacy was estimated in terms of initial cure (at day 30) and the final cure (at 180 days). All information was recorded in a preformed case record form and analysis was performed in SPSS 22. The mean age was 27.13 ± 18.04 years (3-65) with male predominance (60%). Significant regression of spleen size was found following treatment with LAmB at 30 days and 180 days follow up visit (p < 0.05 for all). Overall, rate of initial cure was 90% (n = 27) (child 90.9% vs 89.47% adult) and final cure was 96.66% (n = 29) (child 100% vs 94.73% adult). Fourteen adverse events were recorded mostly including fever and/or shivering (85.71%). No case relapsed or were referred either due to management or Severe Adverse Event (SAE). In real-life experience, the LAmB treatment for visceral leishmaniasis is as safe and effective for treatment of kala-azar patients. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s12639-021-01379-w.
RESUMEN
Soil moisture and air temperature stress are the two major abiotic factors limiting lentil (Lens culinaris Medik.) growth and productivity in the humid tropics. Field experiments were conducted during winter seasons (November to March) of 2018-2019 and 2019-2020 on clay loam soil (AericHaplaquept) of Eastern India to cultivate rainfed lentil, with residual moisture. The objective was to study the effect of different time of sowing and foliar spray of micronutrients in ameliorating the effect of heat and moisture stress lentil crop experience in its reproductive stage. The study was conducted with two different dates of sowing, November and December, as main plot treatment and micronutrients foliar spray of boron, iron, and zinc either alone or in combination as subplot treatment. No foliar spray treatment was considered as a control. The soil moisture content is depleted from 38 to 18% (sowing to harvest) during November sowing; however, in December sowing, the depletion is from 30 to 15%. The foliar spray of micronutrients helped to have a better canopy cover and thus reduced soil evaporation during the later stages of crop growth when the temperature was beyond the threshold temperature of the crop. Crop growth rate (CGR) and biomass were significantly higher (p ≤ 0.05) for November sown crop and with foliar spray of boron and iron (FSB + FE) micronutrients. In the later stages of the crop when the soil moisture started depleting with no precipitation, the canopy temperature increased compared with air temperature, leading to positive values of Stress Degree Days (SDD) index. Delay in sowing reduced the duration by 11.4 days (113.5 vs. 102.1 days), resulting in varied accumulated Growing Degree Days (GDD). FSB + FE resulted in the highest yield in both years (1,436 and 1,439 kg ha-1). The results of the study concluded that the optimum time of sowing and foliar spray of micronutrients may be helpful to alleviate the soil moisture and heat stress for the sustainability of lentil production in the subtropical region.
RESUMEN
Drought and heat stress are two major abiotic stresses that challenge the sustainability of agriculture to a larger extend. The changing and unpredictable climate further aggravates the efforts made by researchers as well as farmers. The stresses during the terminal stage of cool-season food legumes may affect numerous physiological and biochemical reactions that may result in poor yield. The plants possess a good number of adaptative and avoiding mechanisms to sustain the adverse situation. The various agronomic and breeding approaches may help in stress-induced alteration. The physiological and biochemical response of crops to any adverse situation is very important to understand to develop mechanisms and approaches for tolerance in plants. Agronomic approaches like altering the planting time, seed priming, foliar application of various macro and micro nutrients, and the application of rhizobacteria may help in mitigating the adverse effect of heat and drought stress to some extent. Breeding approaches like trait-based selection, inheritance studies of marker-based selection, genetic approaches using the transcriptome and metabolome may further pave the way to select and develop crops with better heat and drought stress adaptation and mitigation.
RESUMEN
Using gamma-ray-induced mutagenesis, we have developed a mutant (named G2) of Trichoderma virens that produced two- to three-fold excesses of secondary metabolites, including viridin, viridiol, and some yet-to-be identified compounds. Consequently, this mutant had improved antibiosis against the oomycete test pathogen Pythium aphanidermatum. A transcriptome analysis of the mutant vis-à-vis the wild-type strain showed upregulation of several secondary-metabolism-related genes. In addition, many genes predicted to be involved in mycoparasitism and plant interactions were also upregulated. We used tamarind seeds as a mass multiplication medium in solid-state fermentation and, using talcum powder as a carrier, developed a novel seed dressing formulation. A comparative evaluation of the wild type and the mutant in greenhouse under high disease pressure (using the test pathogen Sclerotium rolfsii) revealed superiority of the mutant over wild type in protecting chickpea (Cicer arietinum) seeds and seedlings from infection. We then undertook extensive field evaluation (replicated micro-plot trials, on-farm demonstration trials, and large-scale trials in farmers' fields) of our mutant-based formulation (named TrichoBARC) for management of collar rot (S. rolfsii) in chickpea and lentil (Lens culinaris) over multiple locations in India. In certain experiments, other available formulations were included for comparison. This formulation consistently, over multiple locations and years, improved seed germination, reduced seedling mortality, and improved plant growth and yield. We also noticed growth promotion, improved pod bearing, and early flowering (7-10 days) in TrichoBARC-treated chickpea and lentil plants under field conditions. In toxicological studies in animal models, this formulation exhibited no toxicity to mammals, birds, or fish.
RESUMEN
We report an electric field driven destabilization of the insulating state in nominally pure LaMnO3 single crystal with a moderate field which leads to a resistive state transition below 300 K. The transition is between the insulating state in LaMnO3 and a high resistance bad metallic state that has a temperature independent resistivity. The transition occurs at a threshold field (Eth) that shows a steep enhancement on cooling. While at lower temperatures the transition is sharp and involves a large change in resistance, it softens on heating and is eventually absent above 280 K. When the Mn(4+) content is increased by Sr substitution up to x = 0.1, the observed transition, although observable in a certain temperature range, softens considerably. This observation has been explained as a bias driven percolation type transition between two co-existing phases, where the majority phase is a charge and orbitally ordered polaronic insulating phase and the minority phase is a bad metallic phase. The mobile fraction f of the bad metallic phase deduced from the experimental data follows an activated kinetics as f = fo(E)exp(-Δ/kBT) with the activation energy Δ ≈ 200 meV, and the pre-factor fo(E) is a strong function of the field that leads to a rapid enhancement of f on application of field, leading to the resistive state transition. We suggest likely scenarios for such co-existing phases in nominally pure LaMnO3 that can lead to the bias driven percolation type transition.