Effective Alkyl-Alkyl Cross-Coupling with an Iron-Xantphos Catalyst: Mechanistic and Structural Insights.

While iron-catalyzed C(sp2)-C(sp3) cross-couplings have been widely studied and developed in the last decade, alkyl-alkyl cross-coupling systems with iron remain underdeveloped despite the importance of C(sp3)-C(sp3) bonds in organic synthesis. A major challenge to the development of these reactions is the current lack of fundamental insight into ligand effects and organoiron intermediates that enable effective alkyl-alkyl couplings. The current study addresses this longstanding limitation using a combination of 57Fe Mössbauer spectroscopy, SC-XRD (single-crystal X-ray diffraction) and reactivity studies of alkyl-alkyl coupling with iron-Xantphos to define the in situ formed iron-Xantphos intermediates in catalysis. Combined with detailed reactivity studies, the nature of the key mechanistic pathways in catalysis and ligands effects to achieve effective alkyl-alkyl cross-coupling over competing ß-H elimination pathways are probed. Overall, these foundational studies provide a platform for future bespoke ligand and pre-catalyst design for alkyl-alkyl cross-coupling methods development with sustainable iron catalysis.

Unusual S=1 Four-Coordinate Fe(IV) Complexes Supported by Bisamide Ligands: Syntheses, Characterization, and Electronic Structures.

The catalytic relevance of Fe(IV) species in non-heme iron catalysis has motivated synthetic advances in well-defined five- and six-coordinate Fe(IV) complexes for a better understanding of their fundamental electronic structures and reactivities. Herein, we report the syntheses of FeDipp2 and FeMes2, a pair of unusual four-coordinate non-heme formally Fe(IV) complexes with S=1 ground states supported by strongly donating bisamide ligands. By combining spectroscopic characterization and computational modeling, we found that small variations in ligand aryl substituents resulted in substantial changes in both structures and bonding. This work highlights the strong donor capabilities and modularity of the bisamide ligand set. More broadly, it is a critical contribution to the utilization of ligand design to modulate molecular geometries and electronic structures of low-coordinate, high-valent iron complexes.

Palladium and Iron Cocatalyzed Aerobic Alkene Aminoboration.

Aminoboration of simple alkenes with nitrogen nucleophiles remains an unsolved problem in synthetic chemistry; this transformation can be catalyzed by palladium via aminopalladation followed by transmetalation with a diboron reagent. However, this catalytic process faces inherent challenges with instability of the alkylpalladium(II) intermediate toward ß-hydride elimination. Herein, we report a palladium/iron cocatalyzed aminoboration, which enables this transformation. We demonstrate these conditions on a variety of alkenes and norbornenes with an array of common nitrogen nucleophiles. In the developed strategy, the iron cocatalyst is crucial to achieving the desired reactivity by serving as a halophilic Lewis acid to release the transmetalation-active cationic alkylpalladium intermediate. Furthermore, it serves as a redox shuttle in the regeneration of the Pd(II) catalyst by reactivation of nanoparticulate palladium.

Homoleptic Uranium-Bis(acyl)phosphide Complexes.

The first uranium bis(acyl)phosphide (BAP) complexes were synthesized from the reaction between sodium bis(mesitoyl)phosphide (Na(mesBAP)) or sodium bis(2,4,6-triisopropylbenzoyl)phosphide (Na(trippBAP)) and UI3(1,4-dioxane)1.5. Thermally stable, homoleptic BAP complexes were characterized by single-crystal X-ray diffraction and electron paramagnetic resonance (EPR) spectroscopy, when appropriate, for the elucidation of the electronic structure and bonding of these complexes. EPR spectroscopy revealed that the BAP ligands on the uranium center retain a significant amount of electron density. The EPR spectrum of the trivalent U(trippBAP)3 has a rhombic signal near g = 2 (g1 = 2.03; g2 = 2.01; and g3 = 1.98) that is consistent with the EPR-observed unpaired electron being located in a molecular orbital that appears ligand-derived. However, upon warming the complex to room temperature, no resonance was observed, indicating the presence of uranium character.

A TMEDA-Iron Adduct Reaction Manifold in Iron-Catalyzed C(sp2 )-C(sp3 ) Cross-Coupling Reactions.

Herein, we expand the current molecular-level understanding of one of the most important and effective additives in iron-catalyzed cross-coupling reactions, N,N,N',N'-tetramethylethylenediamine (TMEDA). Focusing on relevant phenyl and ethyl Grignard reagents and slow nucleophile addition protocols commonly used in effective catalytic systems, TMEDA-iron(II)-aryl intermediates are identified via in situ spectroscopy, X-ray crystallography, and detailed reaction studies to be a part of an iron(II)/(III)/(I) reaction cycle where radical recombination with FePhBr(TMEDA) (2Ph ) results in selective product formation in high yield. These results differ from prior studies with mesityl Grignard reagent, where poor product selectivity and low catalytic performance can be attributed to homoleptic iron-ate species. Overall, this study represents a critical advance in how amine additives such as TMEDA can modulate selectivity and reactivity of organoiron species in cross-coupling.

NHC Effects on Reduction Dynamics in Iron-Catalyzed Organic Transformations*.

The high abundance, low toxicity and rich redox chemistry of iron has resulted in a surge of iron-catalyzed organic transformations over the last two decades. Within this area, N-heterocyclic carbene (NHC) ligands have been widely utilized to achieve high yields across reactions including cross-coupling and C-H alkylation, amongst others. Central to the development of iron-NHC catalytic methods is the understanding of iron speciation and the propensity of these species to undergo reduction events, as low-valent iron species can be advantageous or undesirable from one system to the next. This study highlights the importance of the identity of the NHC on iron speciation upon reaction with EtMgBr, where reactions with SIMes and IMes NHCs were shown to undergo ß-hydride elimination more readily than those with SIPr and IPr NHCs. This insight is vital to developing new iron-NHC catalyzed transformations as understanding how to control this reduction by simply changing the NHC is central to improving the reactivity in iron-NHC catalysis.

[2Fe-2S] Cluster Supported by Redox-Active o-Phenylenediamide Ligands and Its Application toward Dinitrogen Reduction.

As prevalent cofactors in living organisms, iron-sulfur clusters participate in not only the electron-transfer processes but also the biosynthesis of other cofactors. Many synthetic iron-sulfur clusters have been used in model studies, aiming to mimic their biological functions and to gain mechanistic insight into the related biological systems. The smallest [2Fe-2S] clusters are typically used for one-electron processes because of their limited capacity. Our group is interested in functionalizing small iron-sulfur clusters with redox-active ligands to enhance their electron storage capacity, because such functionalized clusters can potentially mediate multielectron chemical transformations. Herein we report the synthesis, structural characterization, and catalytic activity of a diferric [2Fe-2S] cluster functionalized with two o-phenylenediamide ligands. The electrochemical and chemical reductions of such a cluster revealed rich redox chemistry. The functionalized diferric cluster can store up to four electrons reversibly, where the first two reduction events are ligand-based and the remainder metal-based. The diferric [2Fe-2S] cluster displays catalytic activity toward silylation of dinitrogen, affording up to 88 equiv of the amine product per iron center.

Development and Evolution of Mechanistic Understanding in Iron-Catalyzed Cross-Coupling.

Since the pioneering work of Kochi in the 1970s, iron has attracted great interest for cross-coupling catalysis due to its low cost and toxicity as well as its potential for novel reactivity compared to analogous reactions with precious metals like palladium. Today there are numerous iron-based cross-coupling methodologies available, including challenging alkyl-alkyl and enantioselective methods. Furthermore, cross-couplings with simple ferric salts and additives like NMP and TMEDA ( N-methylpyrrolidone and tetramethylethylenediamine) continue to attract interest in pharmaceutical applications. Despite the tremendous advances in iron cross-coupling methodologies, in situ formed and reactive iron species and the underlying mechanisms of catalysis remain poorly understood in many cases, inhibiting mechanism-driven methodology development in this field. This lack of mechanism-driven development has been due, in part, to the challenges of applying traditional characterization methods such as nuclear magnetic resonance (NMR) spectroscopy to iron chemistry due to the multitude of paramagnetic species that can form in situ. The application of a broad array of inorganic spectroscopic methods (e.g., electron paramagnetic resonance, 57Fe Mössbauer, and magnetic circular dichroism) removes this barrier and has revolutionized our ability to evaluate iron speciation. In conjunction with inorganic syntheses of unstable organoiron intermediates and combined inorganic spectroscopy/gas chromatography studies to evaluate in situ iron reactivity, this approach has dramatically evolved our understanding of in situ iron speciation, reactivity, and mechanisms in iron-catalyzed cross-coupling over the past 5 years. This Account focuses on the key advances made in obtaining mechanistic insight in iron-catalyzed carbon-carbon cross-couplings using simple ferric salts, iron-bisphosphines, and iron- N-heterocyclic carbenes (NHCs). Our studies of ferric salt catalysis have resulted in the isolation of an unprecedented iron-methyl cluster, allowing us to identify a novel reaction pathway and solve a decades-old mystery in iron chemistry. NMP has also been identified as a key to accessing more stable intermediates in reactions containing nucleophiles with and without ß-hydrogens. In iron-bisphosphine chemistry, we have identified several series of transmetalated iron(II)-bisphosphine complexes containing mesityl, phenyl, and alkynyl nucleophile-derived ligands, where mesityl systems were found to be unreliable analogues to phenyls. Finally, in iron-NHC cross-coupling, unique chelation effects were observed in cases where nucleophile-derived ligands contained coordinating functional groups. As with the bisphosphine case, high-spin iron(II) complexes were shown to be reactive and selective in cross-coupling. Overall, these studies have demonstrated key aspects of iron cross-coupling and the utility of detailed speciation and mechanistic studies for the rational improvement and development of iron cross-coupling methods.

TMEDA in Iron-Catalyzed Hydromagnesiation: Formation of Iron(II)-Alkyl Species for Controlled Reduction to Alkene-Stabilized Iron(0).

N,N,N',N'-Tetramethylethylenediamine (TMEDA) has been one of the most prevalent and successful additives used in iron catalysis, finding application in reactions as diverse as cross-coupling, C-H activation, and borylation. However, the role that TMEDA plays in these reactions remains largely undefined. Herein, studying the iron-catalyzed hydromagnesiation of styrene derivatives using TMEDA has provided molecular-level insight into the role of TMEDA in achieving effective catalysis. The key is the initial formation of TMEDA-iron(II)-alkyl species which undergo a controlled reduction to selectively form catalytically active styrene-stabilized iron(0)-alkyl complexes. While TMEDA is not bound to the catalytically active species, these active iron(0) complexes cannot be accessed in the absence of TMEDA. This mode of action, allowing for controlled reduction and access to iron(0) species, represents a new paradigm for the role of this important reaction additive in iron catalysis.

The Exceptional Diversity of Homoleptic Uranium-Methyl Complexes.

Homoleptic σ-bonded uranium-alkyl complexes have been a synthetic target since the Manhattan Project. The current study describes the synthesis and characterization of several unprecedented uranium-methyl complexes. Amongst these complexes, the first example of a homoleptic uranium-alkyl dimer, [Li(THF)4 ]2 [U2 (CH3 )10 ], as well as a seven-coordinate uranium-methyl monomer, {Li(OEt2 )Li(OEt2 )2 UMe7 Li}n were both crystallographically identified. The diversity of complexes reported herein provides critical insight into the structural diversity, electronic structure and bonding in uranium-alkyl chemistry.

Mechanism of the Bis(imino)pyridine-Iron-Catalyzed Hydromagnesiation of Styrene Derivatives.

Iron-catalyzed hydromagnesiation of styrene derivatives offers a rapid and efficient method to generate benzylic Grignard reagents, which can be applied in a range of transformations to provide products of formal hydrofunctionalization. While iron-catalyzed methodologies exist for the hydromagnesiation of terminal alkenes, internal alkynes, and styrene derivatives, the underlying mechanisms of catalysis remain largely undefined. To address this issue and determine the divergent reactivity from established cross-coupling and hydrofunctionalization reactions, a detailed study of the bis(imino)pyridine iron-catalyzed hydromagnesiation of styrene derivatives is reported. Using a combination of kinetic analysis, deuterium labeling, and reactivity studies as well as in situ 57Fe Mössbauer spectroscopy, key mechanistic features and species were established. A formally iron(0) ate complex [ iPrBIPFe(Et)(CH2═CH2)]- was identified as the principle resting state of the catalyst. Dissociation of ethene forms the catalytically active species which can reversibly coordinate the styrene derivative and mediate a direct and reversible ß-hydride transfer, negating the necessity of a discrete iron hydride intermediate. Finally, displacement of the tridentate bis(imino)pyridine ligand over the course of the reaction results in the formation of a tris-styrene-coordinated iron(0) complex, which is also a competent catalyst for hydromagnesiation.

Identification and Reactivity of Cyclometalated Iron(II) Intermediates in Triazole-Directed Iron-Catalyzed C-H Activation.

While iron-catalyzed C-H activation offers an attractive reaction methodology for organic transformations, the lack of molecular-level insight into the in situ formed and reactive iron species impedes continued reaction development. Herein, freeze-trapped 57Fe Mössbauer spectroscopy and single-crystal X-ray crystallography combined with reactivity studies are employed to define the key cyclometalated iron species active in triazole-assisted iron-catalyzed C-H activation. These studies provide the first direct experimental definition of an activated intermediate, which has been identified as the low-spin iron(II) complex [(sub-A)(dppbz)(THF)Fe]2(µ-MgX2), where sub-A is a deprotonated benzamide substrate. Reaction of this activated intermediate with additional diarylzinc leads to the formation of a cyclometalated iron(II)-aryl species, which upon reaction with oxidant, generates C-H arylated product at a catalytically relevant rate. Furthermore, pseudo-single-turnover reactions between catalytically relevant iron intermediates and excess nucleophile identify transmetalation as rate-determining, whereas C-H activation is shown to be facile under the reaction conditions.

Synthesis and Characterization of a Sterically Encumbered Homoleptic Tetraalkyliron(III) Ferrate Complex.

Homoleptic iron-alkyl complexes have been implicated as key intermediates in iron-catalyzed cross-coupling with simple iron salts. Tetraalkyliron(III) ferrate species have been shown to be accessible with either methyl or benzyl ligands, where the former complex is S = 3/2 and distorted square planar while the latter is a S = 5/2 distorted tetrahedral species. In the current study, a new tetraalkyliron(III) complex is synthesized containing modified methylene substituents that incorporate large trimethylsilyl (TMS) groups to further probe steric and electronic ligand effects in tetraalkyliron(III) complexes by increasing the electron-donating ability of the ligand while retaining steric bulk. Detailed structural and DFT studies provide insight into electronic structure and bonding of the four-coordinate trimethylsilylmethyl iron(III) complex compared to the previously reported analogs containing methyl and benzyl ligands.

Homoleptic Aryl Complexes of Uranium (IV).

The synthesis and characterization of sterically unencumbered homoleptic organouranium aryl complexes containing U-C σ-bonds has been of interest to the chemical community for over 70 years. Reported herein are the first structurally characterized, sterically unencumbered homoleptic uranium (IV) aryl-ate species of the form [U(Ar)6 ]2- (Ar=Ph, p-tolyl, p-Cl-Ph). Magnetic circular dichroism (MCD) spectroscopy and computational studies provide insight into electronic structure and bonding interactions in the U-C σ-bond across this series of complexes. Overall, these studies solve a decades-long challenge in synthetic uranium chemistry, enabling new insight into electronic structure and bonding in organouranium complexes.

The Effect of ß-Hydrogen Atoms on Iron Speciation in Cross-Couplings with Simple Iron Salts and Alkyl Grignard Reagents.

The effects of ß-hydrogen-containing alkyl Grignard reagents in simple ferric salt cross-couplings have been elucidated. The reaction of FeCl3 with EtMgBr in THF leads to the formation of the cluster species [Fe8 Et12 ]2- , a rare example of a structurally characterized metal complex with bridging ethyl ligands. Analogous reactions in the presence of NMP, a key additive for effective cross-coupling with simple ferric salts and ß-hydrogen-containing alkyl nucleophiles, result in the formation of [FeEt3 ]- . Reactivity studies demonstrate the effectiveness of [FeEt3 ]- in rapidly and selectively forming the cross-coupled product upon reaction with electrophiles. The identification of iron-ate species with EtMgBr analogous to those previously observed with MeMgBr is a critical insight, indicating that analogous iron species can be operative in catalysis for these two classes of alkyl nucleophiles.

Intermediates and Mechanism in Iron-Catalyzed Cross-Coupling.

Iron-catalyzed cross-coupling reactions have attracted significant research interest, as they offer numerous favorable features compared with cross-coupling reactions with precious metal catalysis. While this research has contributed to an empirical understanding of iron-catalyzed cross-coupling, the underlying fundamental mechanisms of reaction and structures of catalytically active species have remained poorly defined. The lack of such detail can be attributed to the difficulties associated with studying such iron-catalyzed reactions, where unstable paramagnetic intermediates abound. Recently, the combined application of physical-inorganic spectroscopic methods, concomitant organic product analysis, and air- and temperature-sensitive inorganic synthesis has yielded the most detailed insight currently available on reactivity and mechanism in iron-catalyzed cross-coupling. This Perspective highlights this approach and the limitations of the contributing techniques as well as some of the key features of the catalytic reactions studied and lessons learned.

Backbone Dehydrogenation in Pyrrole-Based Pincer Ligands.

Treatment of both [CoCl( tBuPNP)] and [NiCl( tBuPNP)] ( tBuPNP = anion of 2,5-bis((di- tert-butylphosphino)methyl)pyrrole) with one equivalent of benzoquinone affords the corresponding chloride complexes containing a dehydrogenated PNP ligand, tBudPNP ( tBudPNP = anion of 2,5-bis((di- tert-butylphosphino)methylene)-2,5-dihydropyrrole). Dehydrogenation of PNP to dPNP results in minimal change to steric profile of the ligand but has important consequences for the resulting redox potentials of the metal complexes, resulting in the ability to isolate both [CoH( tBudPNP)] and [CoEt( tBudPNP)], which are more challenging (hydride) or not possible (ethyl) to prepare with the parent PNP ligand. Electrochemical measurements with both the Co and Ni dPNP species demonstrate a substantial shift in redox potentials for both the M(II/III) and M(II/I) couples. In the case of the former, oxidation to trivalent Co was found to be reversible, and subsequent reaction with AgSbF6 afforded a rare example of a square-planar Co(III) species. Corresponding reduction of [CoCl( tBudPNP)] with KC8 produced the diamagnetic Co(I) species, [Co(N2)( tBudPNP)]. Further reduction of the Co(I) complex was found to generate a pincer-based π-radical anion that demonstrated well-resolved EPR features to the four hydrogen atoms and lone nitrogen atom of the ligand with minor contributions from cobalt and coordinated N2. Changes in the electronic character of the PNP ligand upon dehydrogenation are proposed to result from loss of aromaticity in the pyrrole ligand, resulting in a more reducing central amido donor. DFT calculations on the Co(II) complexes were performed to shed further insight into the electronic structure of the pincer complexes.

A Pseudotetrahedral Uranium(V) Complex.

A series of uranium amides were synthesized from N, N, N-cyclohexyl(trimethylsilyl)lithium amide [Li][N(TMS)Cy] and uranium tetrachloride to give U(NCySiMe3) x(Cl)4- x, where x = 2, 3, or 4. The diamide was isolated as a bimetallic, bridging lithium chloride adduct ((UCl2(NCyTMS)2)2-LiCl(THF)2), and the tris(amide) was isolated as the lithium chloride adduct of the monometallic species (UCl(NCyTMS)3-LiCl(THF)2). The tetraamide complex was isolated as the four-coordinate pseudotetrahedron. Cyclic voltammetry revealed an easily accessible reversible oxidation wave, and upon chemical oxidation, the UV amido cation was isolated in near-quantitative yields. The synthesis of this family of compounds allows a direct comparison of the electronic structure and properties of isostructural UIV and UV tetraamide complexes. Spectroscopic investigations consisting of UV-vis, NIR, MCD, EPR, and U L3-edge XANES, along with density functional and wave function calculations, of the four-coordinate UIV and UV complexes have been used to understand the electronic structure of these pseudotetrahedral complexes.

The N-Methylpyrrolidone (NMP) Effect in Iron-Catalyzed Cross-Coupling with Simple Ferric Salts and MeMgBr.

The use of N-methylpyrrolidone (NMP) as a co-solvent in ferric salt catalyzed cross-coupling reactions is crucial for achieving the highly selective, preparative scale formation of cross-coupled product in reactions utilizing alkyl Grignard reagents. Despite the critical importance of NMP, the molecular level effect of NMP on in situ formed and reactive iron species that enables effective catalysis remains undefined. Herein, we report the isolation and characterization of a novel trimethyliron(II) ferrate species, [Mg(NMP)6 ][FeMe3 ]2 (1), which forms as the major iron species in situ in reactions of Fe(acac)3 and MeMgBr under catalytically relevant conditions where NMP is employed as a co-solvent. Importantly, combined GC analysis and 57 Fe Mössbauer spectroscopic studies identified 1 as a highly reactive iron species for the selective formation generating cross-coupled product. These studies demonstrate that NMP does not directly interact with iron as a ligand in catalysis but, alternatively, interacts with the magnesium cations to preferentially stabilize the formation of 1 over [Fe8 Me12 ]- cluster generation, which occurs in the absence of NMP.

Intermediates and Reactivity in Iron-Catalyzed Cross-Couplings of Alkynyl Grignards with Alkyl Halides.

Iron-catalyzed cross-coupling reactions using alkynyl nucleophiles represent an attractive approach for the incorporation of alkynyl moieties into organic molecules. In the present study, a multitechnique approach combining inorganic spectroscopic methods, inorganic synthesis, and reaction studies is applied to iron-SciOPP catalyzed alkynyl-alkyl cross-couplings, providing the first detailed insight into the effects of variation from sp2- to sp-hybridized nucleophiles on iron speciation and reactivity. Reaction studies demonstrate that reaction of FeBr2(SciOPP) with 1 equiv (triisopropylsilyl)ethynylmagnesium bromide (TIPS-CC-MgBr) leads to a distribution of mono-, bis-, and tris-alkynylated iron(II)-SciOPP species due to rapid alkynyl ligand redistribution. While solvents such as THF promote these complex redistribution pathways, nonpolar solvents such as toluene enable increased stabilization of these iron species and further enabled assessment of their reactivity with electrophile. While the tris-alkynylated iron(II)-SciOPP species was found to be unreactive with the cycloheptyl bromide electrophile over the average turnover time of catalysis, the in situ formed neutral mono- and bis-alkynylated iron(II)-SciOPP complexes are consumed upon reaction with the electrophile with concomitant generation of cross-coupled product at catalytically relevant rates, indicating the ability of one or both of these species to react selectively with the electrophile. The nature of the reaction solvent and Grignard reagent addition rate were found to have broader implications in overall reaction selectivity, reaction rate, and accessibility of off-cycle iron(I)-SciOPP species. Additionally, the effects of steric substitution of the alkynyl Grignard reagent on catalytic performance were investigated. Fundamental insight into iron speciation and reactivity with alkynyl nucleophiles reported herein provides an essential foundation for the continued development of this important class of reactions.